Used Hydraulic Vise for sale (17,633)

Condition: used, Year of construction: 2018, Serial number: W09S3L330J0D4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21508 Specifications: 3 axles Lift on axle 1 Steering on axle 3 Lower deck length: Approx. 8.97 m Upper deck length: Approx. 4.3 m Decent tires Air suspension Hydraulic loading ramps Extendable Manual widening Toolbox Max payload: 39,265 kg Ready for delivery Description:Doll machine semi-trailer from 2019 in good condition.The trailer is EU-approved and ready for delivery.It is equipped with hydraulic loading ramps, manual widening, and extendable deck. Technical approved: Yes Hnjdpjxlx Tdjfx Afisu EU-approved until: 09.03.2026 Own weight: 11635 Total Weight: 50900 Payload: 39265 Width: 255 Length: 1355 Model: Doll Maskinsemi m/ Bredding og Hydrauliske bruer

Condition: used, Year of construction: 1996, Lot consists of: (77) Hydraulic Tire Curing Presses Hsdpfx Afjxfz E Neienu

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. Hnedpfspvk Diox Afiju 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Condition: used, Year of construction: 2015, 2015 | MAN TGX 18.480 4x2 BLS WITH TIPPER HYDRAULIC AND GOOD TIRES | Used Tractor Unit | 396459 kms 📍Location: Germany, Heusweiler 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 19900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 28 inspection points 28 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The MAN truck was in good condition at the time of the inspection, however, most of the tires need to be replaced. The rear left mudguard is torn off. Unfortunately, the trailer could not be detached, which limited the inspection of the truck. Tilting the driver's cabin was not possible due to the lack of tools, so an inspection of the engine could not be performed. The truck is equipped with a double-acting hydraulic system with two lines and an additional pump designed for a Walking Floor. The total height with the cabin spoiler mounted is 3.9 m. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31325 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Hnodpfx Afoxlvl Dsiju 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: Cybtouch 12G CNC, working width: 3,060 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 3 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 13 kW (17.68 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 7,800 kg, total length: 4,000 mm, total width: 2,800 mm, total height: 2,100 mm, number of support arms: 2, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, Has only been used in a showroom. Excellent condition. With swing-away back gauge, automatic blade angle adjustment (0,5-1,5°), blade gap and cutting length over CNC control. Hnodpfx Afoxnplieieu

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 4050 mm Measurements depth 9200 mm Injection Unit Screw diameter 70 mm Stroke volume 1077 ccm Injection pressure 2200 bar Clamping Unit Clamping force 5000 kN Distance between bars 920 mm Hnedexlvazspfx Afisu Additional Equipment Plus Peripherals: 8x Temperature Control Unit Thermo 5 / Robot: KUKA KR30-3 This Arburg Allrounder 920 S 5000-2100 was manufactured in 2017. It's a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this Arburg Allrounder 920 S 5000-2100 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2019, Serial number: W09S3L330K0D4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21506 Specifications: 3 axles Lift on axle 1 Steering on axle 3 Good tires Air suspension Hnsdpfoxlx S Hsx Afiju Hydraulic loading ramps Extendable Manual widening Lower deck length: Approx. 8.97 m Upper deck length: Approx. 4.3 m Toolbox Max payload: 39,190 kg Ready for delivery Description:Doll machine semi-trailer from 2019 in good condition.The trailer is recently EU-approved and ready for delivery.It is equipped with hydraulic loading ramps, manual widening, and extendable deck. Technical approved: Yes EU-approved until: 14.08.2026 Own weight: 11710 Total Weight: 50900 Payload: 39190 Width: 255 Length: 1355 Model: maskinsemi

Condition: new, Year of construction: 2025, operating hours: 818 h, functionality: fully functional, 400 TONS MOTOR OPERATED WORKSHOP HYDRAULIC PRESS SPEC; Tonnages : 407 Tons at 400 bars Cylinder Calibre : 360 mm, Rot Calibre:250 mm, Stroke:400 mm Motor : 15 KW 20 HP 1500 Revolutions per Minute 380 Volt Pump : 45 cc 67,5 liters 400 bar variable flow rate with power regulation(Taiwan) Lever Hand : 1 P 120 Liters Hydropax ( Import ,Erapa) Front Distance of Press : 1420 mm Hedoxnm Unopfx Afienu Side Distance of Press : 560 mm Daylight : 900 mm Stroke : 400 mm ( Safe ) Movable Cylinder : to right and left Chrome plated and hardened cylinder Emergency Button Motor : 2.2 KW 3 HP 1500 Revolutions per Minute 380 Volt Pump :4 cc 6 liters gear pump Hand Lever : 1/2 ‘’ Hydropax Advance Speed :11.05 mm/sec. Return Speed : 21,35 mm/sec. Oil Tank of Press :1200x1000x600 mm 575 liter Press Frame : ST 44 or ST 52 and Steel Welded Weight of Press : 5500 kg (+/- About)

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hnsdpfx Afjpbvqvoieu Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification Hedpfx Afexnk Rgoienu - Back stop - Roll shelf

Condition: good (used), NC vice Almatic NC 90 Cleaned with cover plates In good condition with various interchangeable jaws Used without any warranty Hnjdpfexnkhrex Afiou

Condition: ready for operation (used), Year of construction: 2002, operating hours: 70,000 h, Control Unit Brand KRAUSS MAFFEI Main Drive Number of axis 3 Injection Unit Screw diameter 90 mm Injection pressure 1742 bar Clamping Unit Clamping force 800 kN Additional Equipment Hydraulic pulley: 4 Case service: 5x hydraulic, 8x pneumatic Robot type: Remak RD30CNC Crane runway: 50000 kN Distance from crane to boom with chain: > 2150 mm Hedpjxlu Uqjfx Afijnu This 3-axis Krauss Maffei 800-5000MC4 was manufactured in 2002. It features a clamping force of 800 kN, a screw diameter of 90 mm, and a maximum shot volume of 2863 cc. The machine includes a Remak RD30CNC robot and supports a crane runway capacity of 50,000 kN. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 800-5000MC4 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Double hydraulic pump, oil pump, gear pump Hodpfx Afob A H H Neijnu -Shaft mounting: Ø 21.5 mm -Price: per piece -Number: 4x Available -Dimensions: 270/120/110 mm -Weight: 6.7 kg

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: H80 997, overall weight: 980 kg, - Year of manufacture: 1980 - Fully functional, connected to power, ready for demonstration - Pressing force: 100 kN - Throat depth: 170 mm - Straightening stroke: 60 mm - Table area: 1300 mm + 2x 50 mm x 260 mm - Table height above floor: 935 mm Hjdsxnkazopfx Afijnu - Max. oil pressure: 200 bar - Hydraulic oil capacity: 70 l - Motor power: 1.5 kW - Drive power: 2.2 kW - Weight: 980 kg - Machine No.: H80 997

Condition: used, Hydraulic Shear COMESSA type CP 316 Capacity: 3000 x 16 mm Back gear gauge travel: 1000 mm Throat depth: 500 mm Motor power: 35 CV Adjustable blades 4 cutting blade Hnodpoxnkahefx Afiju Voltage: 380 V Dimensions (L x W x H): 3500 x 2200 x 2400 mm Weight: 16,5 T

Condition: good (used), Year of construction: 1990, pressing force: 1,200 t, table width: 1,600 mm, table length: 4,000 mm, Pressure: 1200 t Stroke height: 800 mm Table size: 1600 x 4000 mm Hsdpsxnkrksfx Afienu

Condition: good (used), axle configuration: > 3 axles, loading space length: 27,060 mm, loading space width: 2,530 mm, first registration: 04/2006, suspension: hydraulics, tire size: 245/70-R17.5, Year of construction: 2006, Equipment: ABS, = Additional options and equipment = - EBS Hedpfx Afoxni Dljienu - Lift axle - Air suspension - Drum brakes = Notes = 2006 BROSHUIS 5ABSD-68/2 5-axle low loader with ABS/EBS, double extendable (6.70m + 6.50m), extendable up to 27m, 1st axle is a lift axle, 5x hydraulically suspended axles, of which 4x are hydraulically steered (with remote control), hydraulic gooseneck, stake pockets, lashing rings, twistlocks, extensions, unladen weight: 17,000kg, max. total weight: 97,000kg, GIGANT axles with drum brakes, twin tires with 245/70-R17.5 (L: 8/8, 7/8, 7/7, 6/8, 6/4mm; R: 10/11, 7/7, 5/6, 8/6, 6/5mm) = Additional information = Axle configuration Tyre size: 245/70-R17.5 Axle brand: GIGANT DRUM Brakes: Drum brakes Suspension: Hydraulic suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 10,000 kg; Tread depth left inside: 50%; left outside: 50%; right inside: 70%; right outside: 60% Rear axle 2: Twin tires; Max. axle load: 10,000 kg; Steered; Tread depth left inside: 50%; left outside: 45%; right inside: 45%; right outside: 45% Rear axle 3: Twin tires; Max. axle load: 10,000 kg; Steered; Tread depth left inside: 45%; left outside: 45%; right inside: 40%; right outside: 30% Rear axle 4: Twin tires; Max. axle load: 10,000 kg; Steered; Tread depth left inside: 50%; left outside: 40%; right inside: 40%; right outside: 50% Rear axle 5: Twin tires; Max. axle load: 10,000 kg; Steered; Tread depth left inside: 25%; left outside: 40%; right inside: 30%; right outside: 40% Dimensions Dimensions (L x W): 2,706 x 253 cm Weights Unladen weight: 17,000 kg Payload: 80,500 kg Gross vehicle weight: 97,500 kg Functional Body make: Broshuis 5ABSD-68/2 Loading height: 100 cm Extendable body: Yes Condition Technical condition: Good Visual condition: Good Further information Please contact Arne Honingh for further details.

Year of construction: 2003, condition: ready for operation (used), Control Unit Brand SIEMENS Model SIMATIC OP7 This MILLUTENSIL MIL163 hydraulic press was manufactured in 2003. Ideal for various pressing applications, it offers robust performance and reliability. Consider the opportunity to buy this MILLUTENSIL MIL163 hydraulic press. Contact us for more information. Hnsdpfx Ajxlvb Esfiou Application Types Stamping

Condition: good (used), Year of construction: 1957, hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter output: 21 l/min -Weight: 200 kg Hedpfx Afsb A I Eleijnu

Condition: used, Hydraulic Shear PROMECAM GH 1230 A Capacity: 3000 x 12 mm Electrical Back gear gauge travel: 1000 mm Throat depth500 mm Photoelectric cells on the back New blades Length3600 mm Depth: 2400 mm Hnedpfx Ajxni Ukefiou Total height: 1900 mm Weight: 11 T

Condition: good (used), Year of construction: 1990, total height: 7,200 mm, total width: 4,200 mm, total length: 14,500 mm, throat depth: 700 mm, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information Hjdpfx Afoxnkipeisnu - Distance between table and press beam: 1,800 mm

Condition: used, Year of construction: 1993, Hydraulic shear BOMBLED GTS II 3012 Capacity: 3050 x 12 mm Maxi travel: 210 mm Back gear gauge travel: 1000 mm - Back gear gauge ELGO Year of construction: 1993 Throat depth: 110 mm Hnjdpfx Afexni Tgsiou Motor: 13 kW Voltage: 380 V Length: 3700 mm Depth with support: 2500 mm / without support: 2000 mm Total height: 1900 mm Weight: 9,5 T

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, pressing force: 250 t, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Throat depth: 360 mm Hsdpfxsxnkg Ue Afionu Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: used, Hydraulic Shear HACO HS 3010 Hnodpfjxni Svsx Afisu Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Condition: good (used), Year of construction: 1988, pressing force: 160 t, table width: 900 mm, Pressure: 160 t Stroke: 500 mm Table size: 900 x 630 mm Floor clearance: 800 mm Downward speed: 200 mm/sec Upward speed: 125 mm/sec Total power requirement: 17 kW Machine weight approx.: 7 t Hnodpfx Afoxnkfqoiou