Used Hydraulic Section Bending Machine for sale (73,896)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press Nwjdpfx Ajy Uiyvod Soh This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, pressing force: 42 t, empty load weight: 1,000 kg, TECHNICAL DETAILS Bending capacity: 42 t Njdpfx Adszdfb To Sewh Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Stroke length: 300 mm Stroke width: 200 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Shipping weight: 1,000 kg Shipping packages: 2 units EQUIPMENT Documentation CE marking

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR Nedpfxetrd T Te Ad Sswh 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: used, Year of construction: 1995, total length: 2,900 mm, total width: 1,000 mm, total height: 1,400 mm, Colour: Green Empty weight: 4.500 kg Price: On request - Year: 1995 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 34010 HV - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 15.0 - Shaft diameter [mm]: 135 - Moment of resistance [cm³]: 120 - Top roll diameter [mm]: 390 - Bottom roll diameter [mm]: 390 - Capacity diameter round [mm]: 90 - Options: 3D rolling, Digital readout, Extra rolls - Transport dimensions: 2900mm x 1000mm x 1400mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT Nodpfx Aezhbhced Sjwh VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Manufacturer: ENDI Engineering Kft Type: LBS-20 Manufacturing year: 2004 Operating pressure: 200 bar Nodpfxey E Twas Ad Sowh Voltage: 380 V Electric power: 1,5 kW Weight: 378 kg

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Alba DAR 45, Used Machine Manufacturer: Alba (Spain) Type: DAR 45 (Dobladoras Automáticas) Overall dimensions: Nwjdpfxoy Rh Rfj Ad Soh Width: 1300 mm Depth: 800 mm Height: 830 mm Weight: 555 kg Electrical data: 400 V Maximum bending diameter: Ø 45 mm (single bar, for 450 N/mm² steel grade) Bending speed: 2 speed settings (higher speed for smaller diameters)

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Peddinghaus Special 32, Used Machine Manufacturer: Peddinghaus Type: Special 32 Overall dimensions: Width: 660 mm Depth: 850 mm Height: 830 mm Nodpey R A Niofx Ad Sswh Weight: 325 kg Electrical data: 400 V; 7 A Bending capacity: max. Ø 32 mm (single bar) Bending speed: approx. 10 rpm Motor power: 2.2 kW Control system: Automatic bending angle adjustment, foot pedal start

Condition: used, operating hours: 16,158 h, Rebar Bending Machine, MEP FOCUS 12 Rebar Bending Machine, Used Machine Nwodpfx Adezaq Dlo Seh Manufacturer: MEP S.p.A., Italy Model: FOCUS 12 Year of manufacture: 2006 Overall dimensions: MEP bending machine: Width: 3660 mm Depth: 1620 mm Height: 2350 mm Decoiler: Width: 4820 mm Depth: 1980 mm Height: 1460 mm Bending capacity: 6–12 mm Accessories: 5 pcs wire coils 1 pc 8 mm bending tool Programmability: One of the major advantages of the "Focus" series is that the bending angles can be set via an electronic control panel. There is no need to manually adjust mechanical stops as on older Hungarian machines. This significantly speeds up production when, for example, 100 identical stirrups need to be bent. The control system retains its programs even if the machine remains without power for months or even years. The software runs on a dedicated computer. MEP provides full service and technical support for all of its machines, regardless of their year of manufacture.

Condition: ready for operation (used), Pipe Bender, Tube Bending Machine, Profile Bending Machine, SHS/RHS Bender, Used Machine Manufacturer: Schwarze-Wirtz Model: Perfect H135 Dimensions: 6115 x 2870 x 1300 mm Bending Capacity: Round tube: Ø 130 mm, bending radius: 500 mm Square tube: Njdpfswhmv Usx Ad Sewh 30 mm, radius: 380 mm 45 mm, radius: 500 mm 50 mm, radius: 500 mm 70 mm, radius: 500 mm 90 mm, radius: 500 mm Bending Angle: up to 180° Electrical Specifications: 380 V

Condition: good (used), Year of construction: 2006, control type: CNC control, actuation type: hydraulic, controller manufacturer: PC 300 TOUCH, number of rollers: 3, shaft diameter: 105 mm, overall weight: 2,200 kg, total length: 1,850 mm, total width: 1,600 mm, total height: 1,400 mm, Profile bending machine PBT - PBT 35 MACH-ID 9661 Make: PBT Type: PBT 35 Control: PC 300 TOUCH Year: 2006 Front rollers vario adjustable 360 - 1100 mm Power 11 kW each Force pressure in X-Axis 35.000 Kg Hydraulic drive variomatic UNP 200 x 1200 mm T 100 x 100 x 10 x 1200 mm Bar 80 x 80 x 1400 mm Pipe 180 x 2000 mm Nwsdjzguqnepfx Ad Ssh Horizontal and vertical:Vertical Shaft Ø: 105mm Number of rolls: 3 Stroke X-Axis: 390mm Resistance moment: 3000 NmCM³ Working speed: 1 - 16 U/Minmm/min. Length: 1850mm Width: 1600mm Height: 1400mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Used 40-ton bending press from Amga Nsdpfx Adozgtl Dj Sjwh Type: BP 40 Heavy-duty design Includes accessories.

Condition: not inspected (used), Bluhm Systems Marking Laser Here we offer a Bluhm Systems marking laser. Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards. The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser specification in standard configuration Laser type: Fiber laser Laser output power: FL2 model: 19W; typical Wavelength: 1062 nm typical Internal modulation: 20 to 80 kHz Scanner head description: Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens types and their properties: Nwsdpfszgci Esx Ad Ssh Lens marking field: 70x70 mm to 300 x 300 mm Focal length: B 192 mm Operating environment conditions: Relative humidity: up to 80%, non-condensing Operating temperature: 5 - 40°C Recommended operating temperature: 15-25°C Dimensions W x H x D Laser unit: 122 x 108 x 495 mm Control unit: 520 x 380 x 215 mm Cable length, marking/control unit: 3 m Weight, marking unit: 5 kg Weight, control unit: 15 kg Mains voltage 115/230 VAC, 50/60 Hz, single-phase. Power consumption, FL2 model: 450W Type: e-SolarMark FL Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), I am selling a HILMA-ROEMHELD machine vice, good condition. Njdpfx Adov Upvrj Sewh

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 1.5 mm steel Nwjdpfx Aezfk Rnod Ssh Roller diameter: 65 mm Right and left rotation via foot switch Safety rope pull switch

Year of construction: 1980, condition: good (used), with initial rounding Technische Daten:/ technical details Biegelänge / bending lenght 2000 mm max. Blechstärke / max. sheet thickness 20 mm Anbiegeleistung / initial rounding 15/11 mm Walzendurchmesser Unterwalzen / roll diameter below rolls 280 mm Oberwalzendurchmesser / diameter of the upper roll 300 mm Antriebsleistung Hauptantrieb / drive capacity main drive 16,2 kW Antriebsleistung Anstellantrieb Oberwalze / drive capacity upper roll 4,8 kW Antriebsleistung Anstellsntrien Unterwalze / drive capacity below roll 3,7 kW Nwedpokzg E Asfx Ad Soh Gewicht ca. / weight ca. 14200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Profile Bending Machine SOCAD type CP 13.8 Outer wing angle capacity: 80x80x8 mm Flat on field capacity: 55 x 30 mm Flat on flat capacity: 75 x 20 mm T capacity: 80 x 80 mm Square capacity: 55 x 55 mm Equippeed with 1 fluted trainer roller Ø 300 x Ht 150 mm + 2 rollers Ø 260 x thickness 110 mm Voltage: 380 V Motor power: 8 CV Dimensions (L x W x H): 1800 x 1200 x 1400 mm Nedpfjzg Hccjx Ad Sewh Weight: 2,5 T

Condition: used, sheet width 1050 mm plate thickness 2,5 bei 400N/mm² mm roll diameter 90 mm Weight ca. 490 kg Nsdpfx Aszfayfjd Sjwh Motorised three-roll round bending machine in an asymmetrical configuration. Upper roll swivels forwards Bending roll adjustment via handwheel; suitable for conical bending Emergency stop cord The machine comes from a training workshop and is in very good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Njdpfx Aeya Iaqsd Sewh Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, functionality: fully functional, Year of construction: 2000, Set of two machines for bending flue or ventilation pipes. Nwsdpowa T Tdsfx Ad Ssh Available diameters: 97 - 110 - 125 - 139 - 150 - 180 - 200

Condition: used, Hydraulic CNC profiling and grooving machine LEISTRITZ, Type Polymat 50 / 400 CNC Machine No. 90, Year of manufacture 1990 Groove width max. 50 mm Working stroke max. 400 mm Maximum drawing force approx. 15.9 kN Groove depth feed rate 0 to 0.5 mm/stroke Cutting speed max. 20 m/min Return stroke speed max. 40 m/min Table size 440 x 595 mm Number of T-slots 3 T-slot width 14 mm Working height - table height 1405 mm Hydraulic oil tank capacity approx. 150 liters Cutting oil tank capacity approx. 35 liters Motor power (hydraulics) 5.5 kW Mains connection 380 volts, 50 Hz - CNC control POLYMAT - Machining functions: Drawing - Automatic feed with shut-off - Hydraulic working stroke - Infinitely adjustable cutting speed - Oil lubrication - Hydraulic cylinder fitted with new sealing elements (2/2025) - Various accessories as shown Nsdszd Hiqepfx Ad Sewh Weight 1700 kg Space requirement L x W x H 1080 x 1400 x 1405 mm Good condition

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200713, total width: 950 mm, total length: 1,050 mm, total height: 890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 585 kg, oil tank capacity: 13 l, rotational speed (max.): 6 rpm, Electric bending machine P54 Evo Bending machine for concrete reinforcing rebar, studied for high volumes of production. Bending capacity: - 1 rod Ø44 mm (1.73 in) / res. 65 kg/mm² - 1 rod Ø40 mm (1.57 in) / res. 85 kg/mm² Engine 4 kW (5,5 CP), power 400 V (three-phase) Dimensions: cm 105 x 95 x h. 89 Net weight: kg. 585 Operation electric Product handled: concrete reinforcement Displacement: horizontal Bending capacity: Min.: 2 mm; Max.: 44 mm Nodpfxezgv Hdo Ad Sewh RPM 6Two reversal pins, to be positioned on the circumference of the plate to determine the angle of bending; A set of Allen keys, for ordinary maintenance; An electrical pedal, to facilitate the work to the operator permitting him to keep his hands free and work from all sides of the machine; A set of wheels, for the machine handling; An industrial plug, that guarantees the electrical connection; Two mushroom button switches, to immediately stop the machine in case of emergency. They are positioned on two opposite sides of the machine;Standardly mounted on all Evo rebar bending machines, long saddles – with max. 10 holes – are indispensable to realize the double bending. Price Euro 3.660 Euro + VAT, negotiable, ExWorks Oradea, Romania. Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions Nwodjw Dgi Tspfx Ad Seh - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 7300 € 140.89 € 10 to 185 mm 150x8 mm 450x900 mm 150 mm 60 mm 10 mm/s 10 mm/s 1.1 kW 915 mm 900 mm 450 mm 1130 mm 250 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Nsdpfxoynmzcj Ad Sjwh Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: new, neu ca. 8 Wochen ab Auftragse Nwsdewiq N Ijpfx Ad Seh Türkei 12900 € 247.68 € 40 to 285 mm 200x24 mm 660x1250 mm 250 mm 80 mm 10 mm/s 10 mm/s 4 kW 930 mm 1250 mm 650 mm 1250 mm 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: good (used), Year of construction: 1991, machine/vehicle number: 91212035, Offer 26016 Technical data: - max. working width 2040 mm - max. material thickness at 40 kg/mm² tensile strength 4 mm - bending angle adjustable electronically, preselectable 0 - 135° - automatic sequential control for a complete working process - largest opening width / stroke of the upper beam 350 mm - height adjustment: - of the upper beam 100 mm - of the lower beam 100 mm - upper beam drive 400 V / 4 kW - bending beam drive 400 V / 4 kW - accessories: - motorized bending beam adjustment - rear stop adjustable with handwheel - electric foot pedal Nodpjzgu Tijfx Ad Sswh - space requirement with rear stop: - approx. W 3200 x H 1650 x D 2100 mm - weight approx. 4500 kg