Used Reinforcement for sale (3,099)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,800 h, functionality: fully functional, machine/vehicle number: 500 2019 002, Automatic Metal Reinforcement Cutting Center – FC 600 Machine for automatic cutting of reinforcements according to the cutting program Allows loading of 5–10 profiles (maximum length 6.5 m) Accurate positioning with servo motors Pneumatic profile clamping Automatic milling Option to disable unused milling heads Milling speed adjustment Djdpfx Aoyhqfroc Nscc Motor power per unit: 0.37 kW

Condition: used, Year of construction: 2008, functionality: fully functional, total width: 7,000 mm, total length: 950 mm, total height: 1,850 mm, overall weight: 970 kg, 1 Hambi mesh cutting machine TV 60V, working width 6.00 m, year of manufacture 2008, max. 12 mm single rod or 8 mm double rod, cutting time forward/backward approx. 25/20 sec. Connected load 3 kW. Dodpfxjvxtc Do Ac Nocc

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 408 0019 001, - Automatic, computer-controlled screw driving machine Profile reinforcement clamping is managed by the computer Dcodpfjyhluzox Ac Noc Profile dimensions and screw driving intervals can be set via the screen Pneumatic screw feeding and automatic screw driving Automatic system for limiting screw driving depth depending on the profile

Condition: good (used), Big bag traverse, lifting sling, adjustable traverse, crane traverse, overhead crane, crane hook traverse, load traverse, heavy load traverse, cross traverse, H-traverse -Crane traverse: Traverse for reinforcing steel mesh or similar -Load capacity: 5 tons -Hook chain: Length 940 mm -Transport dimensions: 2920/2365/H540 mm -Empty weight: 315 kg Dcedpex Ngp Refx Ac Noc

Condition: good (used), Year of construction: 2000, Reinforcing steel mesh bending machine, bending machine for reinforcing steel mesh -Manufacturer: MBS, Reinforcing steel mesh bending machine type MBM 030 Dcjdpfx Asydpndec Nsc -Passage width: 3120 mm -Operation: Foot switch, semi-automatic -Dimensions: 720/3965/H1140 mm -Weight: 1170 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine Dcjdpfx Acsyb R Nwo Noc -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle Dedpfx Aceyb R Nds Njcc -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine Dodpfx Acoyb R Ake Necc -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1140 kg

Condition: good (used), Reinforcing steel shear, reinforcing steel cutting machine, construction steel shear, profile shear, punch, punching machine Dcjdpfeyay Eljx Ac Nsc -Manufacturer: L & L, steel shear with chassis -Type: FM1001 -Drive: 1.5 kW motor -Cutting width: 20 mm -Cutting height: 100 mm -Dimensions: 1160/500/H765 mm -Weight: 334 kg

Condition: excellent (used), Year of construction: 2004, We are offering this very well-maintained U-R-B-A-N GmbH & Co AMS 6010 reinforcement screwdriving machine, year 2004. Manufacturer: U-R-B-A-N GmbH & Co Dcedpfx Acex Ifmrj Njc Model: AMS 6010 Year of manufacture: 2004 Machine type: Reinforcement screwdriving machine Dimensions: 5 m length, 2.15 m width, 1.8 m height Weight: approx. 550 kg Operating manual and electrical schematic are available. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1992, Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears -Manufacturer: Maschinenfabrik Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm Djdpfx Acjyanqvs Nocc -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg

Condition: new, Year of construction: 2025, – Capacity 36 mm – Automatic and manual mode – 3 programmable bending movements Dsdoydhl Ijpfx Ac Nscc – Foot pedal operation – Hardened bending tools – Emergency stop – Documentation – 400V

Condition: used, functionality: fully functional, control type: manual, degree of automation: semi-automatic, actuation type: electric, Equipment: electrical contact length stop, emergency stop, foot remote control, Rebar bending machine Peddinghaus Spezial 55. Completely overhauled machine with tooling. Dcedpfeydfwuox Ac Noc

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 517334H00059, Year of construction: 2017, operating hours: 14,429 h, load capacity: 5,000 kg, lifting height: 4,300 mm, fuel type: diesel, mast type: triplex, construction height: 2,970 mm, power: 55 kW (74.78 HP), gearing type: hydrostat, fork length: 2,400 mm, fork width: 150 mm, fork thickness: 60 mm, overall weight: 7,858 kg, empty load weight: 7,858 kg, total height: 2,970 mm, color: silver, Equipment: CE marking, cabin, lighting, sideshift, trailer coupling, Used forklift in operational condition Lifting capacity: 5,000kg Lift height: 4,300mm Power: 55kW Overall length: xx mm Width: xx mm Height: 2,970mm Own weight: 7,858kg Fork length: 2,400mm Fork width: 150mm Fork thickness: 60mm Minimum fork spacing: 570mm (measured externally with forks closed) Maximum fork spacing: 2,020mm (measured externally with forks opened) Mast type: Triplex Side shifter: yes Cabin: yes Road lighting: yes Year of manufacture: 2017 Operating hours: 14,429h Condition: used, ready for operation The forklift can be controlled with great precision and sensitivity. Immediately available from stock! Dodpfx Aswtyubjc Nscc Includes: cabin, lighting, hydraulic side shifter, hydraulically adjustable forks, heating and ventilation for the cabin, CE certificate The forklift can also be rented. Delivery and pick-up within Germany possible with our own truck. Please submit your inquiry or simply call us. We are a family-owned company from Sauerland, official Mima importer, and your contact for service and maintenance of forklifts.

Condition: as good as new (ex-display), Year of construction: 2023, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm Dcedpfx Aoxabntec Noc - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: reconditioned (used), functionality: fully functional, URBAN POWER SCREWDRIVER with automatic SCREW FEEDER Dcedpfx Acox U An Tj Noc Technical data: Air connection: 7 bar Length: 1,400 mm Width: 700 mm Height: 1,800 mm Weight: 100 kg Machine overhauled

Condition: used, Technical details: bending angle max.: 0 - 225 ° operating voltage: 380 V Dodpsx Adbnsfx Ac Necc revolutions per minute: 5 -16 U/min Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars Dodpfoxu Dxqox Ac Nscc without accessories! *

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm -13 holes of size Ø 48mm Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough * Dcodpfxeu Ibu Rs Ac Nec

Condition: ready for operation (used), System uncoils construction steel from coil and cuts it to desired length Straightening and cutting-to-length machine 8/10/12/14 mm Dcsdow Trpcepfx Ac Nsc

Condition: good (used), - Material: DIN 1.4404 / AISI 316L - Surface : 3D (BA) Dimensions: - Width: 1475 mm - Depth: 2750 mm - Height: 3700 mm - Ground clearance: 500 mm Design: - Rectangular manhole 310 x 420 mm - Residual drain butterfly valve DN 40, Friedrich no. 2 - Clear drain Angled seat free-flow valve DN 40, Friedrich no. 2 - Clear drain butterfly valve and swivel elbow DN 40, Friedrich no. 2 - Level indicator - Cooling plate - Handwheel taster Dedpfx Ajv Hxi Soc Nscc - Dome NW 400 mm with swivelling cover

Condition: reconditioned (used), Year of construction: 1996, Mubea / Muhr and Bender BS110: - mech. reinforcing steel shears - low-maintenance central oil lubrication - elect. Lifting magnet engagement via foot pedal - cuts reinforcing steel up to Ø 50 mm - workshop overhauled Special tools and devices on request. Trade-in of used machines. Djdpfoqfgy Hjx Ac Nocc Europe-wide delivery possible.

Condition: used, For sale: fibreglass tank with a capacity of 32 m3. The tank is airtight and has never been glued. Free loading, transport possible. Diameter: 290 cm, Length: 680 cm. Dcsdjxpm Spopfx Ac Nsc

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1, This machine is popular and NECESSARY in many different plants. Thoroughly shreds and feeds dispersed reinforcement WE HAVE PRODUCED A NEW, IMPROVED VERSION The net prevents larger objects (parts of cartons, bags) from falling into the chute, and also eliminates the need to use an adhesive vibrator, although it is possible to install it. We have outboard vibrators in stock) Dsdpfx Aowt Hfasc Necc Convenient to use and transport. It prevents the formation of „hedgehogs” in concrete. Suitable for work in concrete batching plants and on the construction site, when feeding reinforcement, fibre and plasticizers directly into the concrete truck. Easy to transport. It consists of: a blower on wheels, a 5.5 kW/400V motor and a mesh on which the reinforcement is placed, a transport pipe with a diameter of 14 cm (pipe in two parts (easier to transport), 2 90-degree elbows and an end elbow made of two rods supporting the pipe. This dispenser is made in such a way that it consists of many stable segments, easily dismantled, but guaranteeing high durability. It is easy and less expensive to replace each component in the event of damage or wear. Despite this, it is very rigid. Where possible, we have tried to make connections with identical flanges. In practice, we have only two types of flanges – one type for pipes (round), the other rectangular, for connecting individual parts of the machine.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, STOCK MACHINE: Working direction from left to right – Subject to prior sale – HECHT Exenso Profi Saw Cutting Center ESA-9 Comprising: Infeed: - Robust aluminum construction in proven profile design - Ergonomically adjustable working height from 985 – 1055 mm - Raw bar length from min. 400 mm up to max. 6,000 mm (optional extension kit available for up to 6,500 mm) - Material supply via chain conveyor for fully automated 9-compartment loading - Working direction from left to right Professional Cutting Saw: - Automatic bandsaw with pneumatic clamping system, consisting of 3 clamping elements - Infinitely variable saw feed via hydraulic unit - Workflow controlled via Exenso control system - The sawing area is secured at the front by a light curtain. - Bandsaw drive: 1.5 kW, frequency-controlled - Bandsaw dimensions: HBS 250 G 3320 x 27 x 0.9 mm, long service life - Cutting speed: in regulated operation 15-110 m/min - Cutting range: width 10-120 mm, height 10-80 mm Outfeed: - Robust aluminum construction in proven profile design - Ergonomic removal height from 760 – 820 mm (Note: not adjustable independently from working height) - Part outfeed via powered roller conveyor with steel rollers - Roller-guided ejection unit across three levels onto inclined discharge table - Maximum part length via automatic outfeed: 3,500 mm (optional extension kit available for working length up to 4,500 mm) - Scrap disposal via ejection unit – max. length 600 mm - Scrap pieces discharge via chute into customer-provided waste container (Note: waste container not included) - Remnant identification indicated at placement position for manual collection by operator Software / Data Interface: - HECHT Exenso ESA software (version specified after joint pre-acceptance) Operation: Djdpfoxft I Asx Ac Nocc - Reinforcement bars are loaded onto the feed magazine in the infeed section by the operator according to specifications/display. - Transmission of the required cut lengths for the PVC cutting center from customer’s window manufacturing software via integrated data interface - Steel is automatically conveyed and fed - Optimized cutting to the specified lengths - Transport of steel to the pick-up position in the outfeed section - Optionally, double cuts can be made upon inspection Scope of delivery: - Bandsaw - Infeed conveyor - Outfeed conveyor - Light curtain - Control system with Win 10 and 15" touch screen - Data interface REST API can be adapted to an existing cutting center after inspection - The system is disassembled into several packages for transport Includes: 540.1082 1x Guard fence wall connection set with door switch ESA/SSA, usable right or left; 723.5011 1x bandsaw blade M42 3320x27x0.9 12-16 TPI, fine; 942.5541 1x minimum quantity lubrication for ESA & SSA saw systems – significantly extends bandsaw blade service life; Includes: minimum-quantity lube nozzle, 1L lubricant, holder for lubricant, filter for protection against contamination; 829.0201 1x additional buffer monitor for steel terminal ESA/SSA, additional display.