Hydraulic cutting shear swing cut

KK-Industries Tafelschere KK kletzer SW 3200 x 6 mm

Condition: new, sheet thickness steel (max.): 4 mm, - Capacity 4 mm - Adjustment of the hydraulic roller - foot switch Ihedpfegg Nq Hjx Ah Net - Brake motor - With 4 roller sets - Emergency stop - 400V

Condition: like new (used), Year of construction: 2024, Teschniche data: Sheet length 4,100 mm sheet thickness 6 mm Ihsdpfx Ahsh Ib T Ue Nst width of the stand - mm Total power requirement 15 kW weight approx. 11,5 kg Dimension (LxWxH) 5250 x 2300 x 22150 mm Backgauge 1000 mm D-Touch 7 touch screen CNC control, user friendly Central cutting angle adjustment Ball screw, 1000 mm & automatic swivel open Support balls in table for better material handling Side stop with scale & T-slot and tilt stop Support arms with T-slot and tilt stop Cutting line illumination & 1 m hinged finger guard High performance hydraulic and electronic components Automatic pressure adjustment Pivoting backgauge Cutting line illumination Foot pedal CE standard for EU The machines can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our site in Staufenberg. We will be happy to provide you with further information on request.

Condition: new, - Ring bending machine - Shaft diameter 60 mm - The two lower rollers are hydraulically driven - Three rollers are driven - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation Ijdpfx Ahegg N Ame Njht - 400 V

Condition: used, Year of construction: 2014, Power Control PC 22 with WoodWop software - POWERTOUCH Panel height mm 8 - 60 Pvc/Abs mm 3 Feed speed up to mt/min 25 (with rounding 20 mt\min) Working height electronically adjustable by N.C. Motorized rubberized belt with upper pressure Panel support guide and easy introduction for small panels Controlled infeed guide Anti-adhesive group Rectifying group with two KW 3 motors each, 9000 RPM Reel magazine Gluing group for PUR glue with pre-melter and glue tank Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C. End trimming unit with 2 motors (automatic tilt adjustment?) Overlapping trimming unit with 2 motors Rounding unit with 2 multifunction motors (cornering unit + rounding unit) with NC adjustment Edge scraping unit Glue scraping unit Brushing unit Anti-stick unit TECHNICAL DETAILS TO BE CHECKED Ijdpfxevqbh Ee Ah Neht

Condition: new, sheet width 2050 mm plate thickness 3 mm distance between columns 2100 mm back stop - adjustable 600 mm connected load kW weight of the machine ca. 1,1 t dimensions 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake Ihjdpfx Aefv H Dkeh Not system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Isdpfx Asd Ixadoh Neht Weight (kg) 5000

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. Isdjl Dw D Ejpfx Ah Noht The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: repair required (used), HYDRAULIC HOT PLATE PRESS, MODEL LS/L/R 30/13 SP. 150 mm Composition - LOADER - HYDRAULIC PRESS WITH HOT PLATENS, MODEL LS/L/R 30/13 SP. 150 mm Isdpfen R Dihsx Ah Nsht - 3000x1300 mm HOT PLATE ROLLERS UNLOADER Press platen dimensions 3000x1300 mm. Press plungers No. 6 Ø 70 mm stroke 200 mm. Press platen thrust 70 t.

Condition: new, Year of construction: 2025, Power at 50%: 20kVA Short circuit-current: 11,6kA Electrode force: 180daN Throat depth: 455mm --- Weld control: WS 402 (4-times, 2-program) --- Extra Equipment: - foot pedal - main switch Ihodpfx Ahek E Hnue Not --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, Year of construction: 2007, sheet width 3020 mm plate thickness 2.0 mm bending angle max. 135 ° stroke of upper beam 250 mm Adjustment folding beam 25.0 mm work height max. 935 mm control SCHRÖDER NC total power requirement 6.0 kW weight of the machine ca. 3350 kg. dimensions of the machine ca. 4250 x 2300 x 1900 mm - in checked conditions - machinevideo - ?v=kyDHkc9opN4 Features: - Dynamic, powerful motorized folding machine - Used SCHRÖDER NC control unit with LCD display * Manual, setup, and automatic operation * Fast programming of individual parts * Pivoting control panel, right front - NC electro-motorized backgauge with rear sheet support surface - Manual lower beam adjustment - 1x freely movable double foot switch - 1x bending tool set - 2x emergency stop buttons at the front Ihodoxacfyepfx Ah Net - Operating instructions (PDF)