Used Hydraulic Copy Lathe for sale (21,919)

Year of construction: 1977, condition: used, Weiler Matador lathe year ca.1977 , three-jaw chuck , Multifix. Machine in a ready to use condition , By arrangement under power ready for demonstration. Iodpfx Aenkad Sehbjtn

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Itodpfx Ahjpvk Disbon Automatic pressure reset Opening timer

Condition: good (used), Maximum turning diameter with top carriage 1350 mm Maximum turning diameter with side carriage 1100 mm Maximum turning height 1000 to 1250 mm Table diameter 1100 mm Maximum table load 4000 kg Power of main motor 30 kW Table speeds 6.3 - 200 rpm Number of table speeds 16 Distance between floor and table surface 955 mm TOP CART: Vertical travel of the ram with tool holder (Z axis) 600 mm Longitudinal travel of the slide (X axis) 700 mm Number of tool holes in the tool holder 5 Diameter of tool hole 60 mm Working feeds 12; 0,21 - 10 mm/min Fast feed rate 1880 mm/min SIDE CARRIER: Vertical slide travel (R axis) 800 mm Slide travel (P axis) 630 mm CROSS BEAM: Vertical travel 1000 mm Feed rate 500 mm/min Itodpfxjtn S D Ao Ahbon

Condition: excellent (used), Swing over bed 360 mm Distance between centers 650 mm Spindle speeds 20-3250 rpm Iodpsrx Rwnjfx Ahbetn Misc. accessories MARCELS MASCHINEN CH

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Itjdogyy I Aepfx Ahbsn Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Condition: used, Year of construction: 2013, Technical details: turning diameter: 38 mm Article: CNC Long-turn automatic lathe Manufacturer: Hanwha Type: STL38H Year of construction: 2013 Control: Siemens 840SL for 8 axes Main spindle: max. turning diameter: 38mm; spindle bore max. 42mm, n max. 6,500 rpm Power max. 23 kW; C-axis with 0.001 degree; stroke Z1 320mm; synchronised guide bush unit; guide bush type JBS or SL38; type collet 173E / F48 Counter spindle: Itsdpfxstv Sdfj Ahbjn max. pick-up diameter: 38mm, n max. 6,500 rpm Power max. 23 kW; C-axis with 0.001 degree; stroke Z2 320mm; type collet 171E / F42 Tool turret: n max. 6,000 rpm Power max. 2.6 kW; Servo axes: X2, Y2, Z2; Stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120 Bar feeder FMB Turbo 5-55 High-pressure station SFB-301 eco 150bar Please, contact us for getting more information and pictures on mail(at) or *

Condition: ready for operation (used), Swing over bed 570mm Distance between centers 1800mm Turning length 1500mm Center height 280mm Swing over slide 365mm Spindle bore 62mm Spindle speeds 11,2-2240 rpm Iedpfxjfmd Dhe Ahbotn MARCELS MASCHINEN CH

Year of construction: 1994, condition: good (used), machine/vehicle number: 24.105, A used, well-maintained hydraulic press brake HATASTAR, equipped with: - CYBELEC DNC 70 control system - Controlled axes Y1, Y2, X, R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system - Tools - Press brake manual - Documentation Bending length 4600 mm Frame width 4100 mm Pressing force 1350 kN Stroke 220 mm Rapid traverse 140 mm/sec Working speed 10 mm/sec Return speed 100 mm/sec Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change. Isdpofthzkjfx Ahbstn

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 171648, turning diameter: 380 mm, spindle bore: 88 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, total height: 2,850 mm, total length: 4,200 mm, total width: 2,000 mm, overall weight: 5,600 kg, bar passage: 77 mm, spindle nose: A2-8, center height: 1,020 mm, quill mount: MK 5, Equipment: documentation/manual, MAZAK QUICK TURN NEXUS 250 MY CNC lathe - Chuck size: 10 inches - Max. swing diameter: 675 mm - Standard turning diameter: 276 mm - Max. turning diameter: 380 mm - Distance between spindle nose and turret face: 115 - 690 mm - Load capacity including chuck: 400 KGF (chuck work), 700 KGF (bar work) - Acceleration and deceleration time: 2.3 sec - Travel range of tailstock: 550 mm - Max. thrust: 700 KGF Iodpfxoz Nv H Uo Ahbstn - Number of tools (milling cutters): 12 - Tool size: max. external turning tool: 25 x 25 mm, internal turning tool diameter: 40 mm, milling drill diameter: 20 mm, milling tap: M12, shank milling cutter: 20 mm - Switching time to next/opposite position: 0.2/0.6 sec - Milling spindle speed: 25 to 4500 rpm - Rapid traverse C-axis: 40 rpm - For further technical data, see the photographed data sheet - With technical documentation - Transport height: approx. 1850 mm Note: without bar feeder, includes the collets and tool holders shown in the pictures - some are powered. Important note: the workbench possibly shown in the pictures is not included in the scope of delivery! FCA D-01445 Radebeul - loaded onto a truck

Condition: excellent (used), Year of construction: 1999, Imal hydraulic plate shear, type CCOSI 40/8 Iodpfxjz Nx Nro Ahbjtn working width 4050 mm sheet thickness max. 8 mm Delem CNC control, type DP 10 automatic shear gap adjustment automatic angle adjustment controlled back gauge equipped with a front conveyor belt

Condition: good (used), Year of construction: 2014, machine/vehicle number: 746, Offer 26216 Technical data: - Saw blade diameter up to 400 mm - Miter adjustable to the left and right up to 30° - Cutting range at 90° for round and square stock: 140 mm - Cutting range at 90° for rectangular stock: 210 x 120 mm - Cutting range at 45° for round and square stock: 120 mm - Cutting range at 30° for round and square stock: 105 mm - Cutting speeds continuously adjustable from 10 to 80 m/min - Feed speed of the saw blade hydraulically continuously adjustable - Pneumatic clamping system/vise - Coolant system + micro-spray system Ijdpfx Asz Ny Ddshbotn - Outfeed – roller conveyor with dimension stop: 3000 mm - Infeed – roller conveyor: 3000 mm - Pneumatic connection: 6 bar - Drive: 400 V / 4.0 kW - Space requirement: approx. W 1000 x H 1900 x D 1200 mm - Weight: approx. 1000 kg

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Isdpez N Dpkefx Ahbotn

Condition: excellent (used), XYZ SLX 425 x 1.25m CNC Lathe Year 2016 Serial number L769 ProtoTRAK SLX Distance between centres 1,250 mm Maximum cutting length 1,080 mm Swing over bed 480 mm Swing over cross slide 257 mm Iedsz N Ambjpfx Ahbetn Swing in gap 700 mm Gap in front of faceplate 170 mm Cross slide travel 230 mm Spindle bore 80 mm Spindle nose D1-8 Camlock Spindle motor 7.5 kW / 10 hp Spindle speed range 25–2,500 rpm in 3 ranges Tailstock quill travel 160 mm Tailstock taper No. 5 Morse taper Tailstock quill diameter 75 mm Bed width 370 mm

Condition: used, Year of construction: 2002, Lathe Gildemeister Gildemeister NEF 320K, year of manufacture 2002. Ijdpfx Aozu Aqlehbetn

Condition: good (used), Year of construction: 1975, turning length 1000 mm turning diameter over bed 430 mm Itsdpfxsz I Uckj Ahbsn turning diameter over slide rest 235 mm spindle turning speed range 11.2 - 2.000 U/min spindle bore 56.0 mm morse taper 4 MK quill stroke 135 mm bed width 333 mm spindle taper DIN 55022 Gr. 6 total power requirement 7.75 kW weight of the machine ca. 1950 kg From a maintenance workshop Good condition (!!) Features: - Heavy-duty, robust conventional lead/feed screw machine - 3-jaw chuck, Ø 250 mm, including replacement jaws - "RSF Elektronik" digital display Type Z735 - MULTIFIX tool holder, with 5 inserts - "FINN SAFETY" foldable chuck guard Type SPS 400 - Sliding tailstock * Includes RÖHM rotating center point - Freely adjustable machine lamp - 1x chuck key - Chip guard - Sliding bed stop - Coolant system with drip pan

Condition: used, Year of construction: 2004, Technical details: Isdpfxevb Hlwo Ahbetn faceplate diameter: 4770 mm swing diameter: 7000 mm turning height: 1000 mm slide stroke: 1000 mm workpiece weight max.: 100000 kg faceplate turning speed range: 2 - 20 U/min feed speeds: 1 - 10000 mm/min rapid traverse: 10 m/min ram head dimension: 250 x 250 mm main drive: 100 kW total power requirement: 200 kW with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment *

Condition: good (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 4702, stroke rate (max.): 18 1/min, power: 11 kW (14.96 HP), input voltage: 380 V, input frequency: 50 Hz, operating pressure: 200 bar, overall weight: 5,250 kg, total length: 3,860 mm, total width: 2,500 mm, total height: 1,560 mm, BAYKAL 3100 X 6 Plate Shear Iedpfoz Nftkox Ahbetn - Cutting capacity: 6 mm - Cutting length: 3060 mm FCA D-35614 Aßlar - loaded onto a truck.

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 030536, turning length: 2,000 mm, center width: 2,000 mm, center height: 330 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 18,500 W, The Saeilo Contur Dialog H 66/2000 is a used cycle lathe, manufactured in 2004 (first commissioning 02/2004), equipped with a Siemens Sinumerik 810D control system. With a center height of 330 mm and a center distance of 2,000 mm, it is designed for longer shafts that are machined individually or in small batches. It can be operated manually or programmed for cycle operation. The machine is located in the Düsseldorf area. TECHNICAL DATA - Year of manufacture: 2004 - Control system: Siemens Sinumerik 810D - Center height: 330 mm - Center distance / turning length: 2,000 mm - Swing diameter over slide: 400 mm - Spindle speed max.: 2,500 rpm - Spindle drive: 18.5 kW EQUIPMENT AND ACCESSORIES - Chip conveyor Saeilo TTM-325 (hinged belt) - Turning chuck - Turning and clamping tools Itsdez H Ugaopfx Ahben - Setup tools - Operating manual Contur Dialog H 56/66/66G CONDITION During our inspection on 01.10.2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION Suitable for shafts, spindles, and tube parts up to 2 m in length in the tool and maintenance sector, where many individual parts are required. LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection by appointment. Dismantling, loading, and transport are organized by the buyer; upon request, we can provide contact details for freight forwarders in the region. Price on request. Please contact us via the contact form.

Condition: used, Year of construction: 2004, turning diameter 620 mm turning length 2000 mm control MSX 501 total power requirement 30 kW Iodpfx Aoz Icunjhbstn

Condition: ready for operation (used), 3-jaw chuck (diameter 250mm) tool holder device tail stock 3x steady rest Technische Daten / technical details: Spitzenweite / center to center 2000 mm Umlaufdurchmesser über Bett / rotary diameter over bed 510 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 310 mm Spindelbohrung / spindle hole 52 mm Drehzahlbereich / spindle speed 44-2240 UpM /rpm Itodpfxoz Hutts Ahbon Gewicht der Maschine ca. / weight ca. 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2025, spindle bore: 44 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, spindle motor power: 7,500 W, total height: 1,800 mm, total length: 2,500 mm, total width: 1,300 mm, quill diameter: 32 mm, overall weight: 3,500 kg, CNC Lathe with c-axis QuickTech - T6 MILL Max. turning Ø: 400mm X-Axis: 200mm Z-Axis: 300mm Spindle bore: 44mm Speedrange: 5000Rpm Spindle power: 7.5kW ATC / revolver: 12 Speed live tools:4000Rpm Pinole taper: 4Mk Itsdpfx Aez Hvlkehbsn Stroke pinole: 70mm Quill Ø: 32mm Length: 2500mm Width: 1300mm Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1987, machine/vehicle number: 17251, Pressing force: 63 tons, with draw cushion and separate hydraulic unit. Itodpfx Ahsz Nhp Ioben

Condition: excellent (used), Year of construction: 1966, Exner 200 Pressure: 200 t Stroke: 180 mm Table length: 690 mm Table width: 530 mm Distance between columns: 420 mm Isdsz N Tf Uspfx Ahbotn Hydraulic four-column press for embossing, upsetting, flow forming, calibrating, and punching Type H4SP 200 S 1101-3 Year of manufacture: 1966 _____ Downward pressure capacity: approx. 200 tons Upward retraction force: approx. 20 tons Usable table size: 420 x 220 mm Total table size: 700 x 530 mm Distance between columns at the front: 420 mm Laterally: 220 mm Installation height, table to ram (top): 380 mm Ram stroke: approx. 200 mm Piston / column diameter: 270/120 mm Piston bore: 50 mm Closing speed of the ram: - Rapid traverse / working stroke / ram at 330/10/180 mm/s Total power consumption: approx. 15 kW - 380 V - 50 Hz Weight: approx. 3,000 kg Machine dimensions: approx. 1.4 x 1.3 x approx. 2.75 m Accessories / special equipment: Sick light curtain

Condition: used, Year of construction: 2018, HAAS ST20Y, year 2018 Y-axis C-axis Live tooling Iedpfez N Splsx Ahbetn Chuck diameter 210mm Max. spindle speed 4000 rpm Spindle bore 51mm Z-axis travel 533mm Y-axis travel ±51 mm X-axis travel 236 mm Tool turret with 24 positions on BMT65 Programmable tailstock Tool probe Part catcher Chip conveyor Tool holders: 9 standard Powered tool holders: 2, 1/1

Condition: used, functionality: fully functional, total length: 2,000 mm, load capacity: 1,250 kg, Telescopic fork tines Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: very good Isdpfxoz N I Iqs Ahbstn Description: Good, ready-to-use condition, as returned by the previous owner // good working condition, as back from the pre-owner 1,250 kg @ 500 mm, 458 kg @ 1,600 mm, 1,200 mm - 2,000 mm