Used Hydraulic Copy Lathe for sale (19,773)

Condition: good (used), Grafcut G73H Hydraulic Paper Cutting Guillotine Machine in very good condition. The machine was operated in a digital printing house, with low mileage. Rsdpfx Aox Hqnledaon Description: • LCD touchscreen programmer (100 programs, each with 100 steps) • Hydraulic knife and pressure drive • PLC-controlled feed • Illuminated cutting line • Stainless steel-covered tables • Additional manual knob for moving the feed beam • Mechanical foot pedal for pressure adjustment • Pressure force adjustment • Side tables • Photocells protecting the work area • Safety features: knife stop control at top dead center, two-handed operation, rear table guard • Air table • Quiet operation The machine is equipped with all safety devices and guards, and meets CE standards.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: GP6000H2, total length: 6,000 mm, overall weight: 2,600 kg, type of input current: AC, pressing force: 12 t, input voltage: 400 V, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Rjdpfxju Axfco Adaen Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: new, functionality: fully functional, Year of construction: 2025, CONSTMACH hydraulic boom crusher, also known as a hydraulic rock crusher, is designed to deliver superior performance in demanding work environments such as quarries, mining operations, and recycling facilities. With its high impact force, it easily breaks down large-sized rocks and stones, making them suitable for the crushing line. This system allows large materials entering the crusher's bunker, especially in the initial crushing stage, to be reduced in size without direct human intervention. The hydraulic boom system, which can be controlled remotely, offers the operator maximum safety, comfort, and control. Vibration and noise levels are kept to a minimum, protecting both the operator and the equipment's lifespan. Thanks to its high-quality material structure, the CONSTMACH hydraulic boom crusher maintains its durability for many years and stands out with its easy maintenance and integration with different crushing systems. This system is an excellent solution for businesses seeking efficient, economical, and safe crushing. Hydraulic Boom Crusher Technical Specifications Crusher: CHB400 Weight: 350 kg Equipment Diameter: 68 mm Pressure and Flow Rate: 100-150 bar / 50-80 liters Installation Area: 700 m² Boom System Specifications Working Angle: 360° Maximum Reach Area: 9000 mm Material: S355J2 Motor Power: 18.5 kW Control Type: Radio-controlled and manual valve control Filters: OMT 25 microns Rodsxqgv Djpfx Adajn Hoses: (R2) Bezek Why Choose CONSTMACH Hydraulic Rock Breaker? With years of experience in the industry, CONSTMACH prioritizes quality and safety at every stage of production. Our hydraulic rock breaker systems are designed to offer maximum efficiency and minimum maintenance costs. All parts are manufactured from high-strength steel to withstand heavy-duty conditions. Furthermore, we guarantee the uninterrupted operation of your business with our spare parts and technical service support. If you are looking for a durable, reliable, and high-performance crushing solution, the CONSTMACH hydraulic boom crusher is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm Rodpfx Aoxdmgvedaon CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Rsdpfoxpqm Rex Adasn Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: good (used), Saxon Bag Sealer With Reverse Facility Rjdpfx Ajv Dm Epjdaen With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel 230 Volt Power Supply

Condition: used, Demanders hydraulic vise, Rjdpfjv Rnwmex Adaen

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm Rsdpfxotndu Ue Adaon CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: good (used), functionality: fully functional, Year of construction: 1997, degree of automation: manual, working width: 4,000 mm, distance between stands: 3,145 mm, overall weight: 10,500 kg, total length: 4,180 mm, total width: 1,600 mm, total height: 2,665 mm, LVD PPT165 COPY Redow Eawyopfx Adaon 4000 mm 165 T Easy to operate. Not CNC. Transport can be arranged. It appears the machine is a copy of LVD. Sold by SH Trading.

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Redecmat Uepfx Adaen Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady. Rodpfswhylvex Adajn

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 Main spindle Max. bar diameter: 16 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 Sub-spindle Max. bar diameter: 12 mm Spindle speed: 8,000 rpm Number of tool positions: 4 Rjdjycp Nlepfx Adajn MACHINE DETAILS Control: FANUC 18i-T Operating hours: 32,000 h EQUIPMENT FMB Minimag bar loading magazine Note: Dismantling and loading can be carried out by the seller for €1,500.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 47,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 Rodpeycp Ihefx Adasn MAIN SPINDLE Max. bar diameter: 12 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 SUB SPINDLE Max. bar diameter: 10 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Operating hours: 47,000 EQUIPMENT FMB Minimag bar feeder Note: Dismantling and loading can be handled by the seller for €1,500.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 385 mm, turning diameter: 350 mm, overall weight: 4,200 kg, controller model: Fanuc Series 01-TB, The machine's hydraulics have been renewed! TECHNICAL DETAILS Max. turning diameter: 350 mm Max. turning length: 385 mm Turret tool changer: 12-position EWS MACHINE DETAILS Rsdpfx Adeyf Afljaen Control system: Fanuc Series 01-TB Dimensions & Weight Dimensions (L x W x H): 2,700 x 1,800 x 1,700 mm Machine weight: 4,200 kg

Condition: ready for operation (used), functionality: fully functional, turning diameter: 1,700 mm, center height: 630 mm, center width: 4,000 mm, spindle speed (max.): 400 rpm, empty load weight: 4,000 kg, TECHNICAL DETAILS Centre height: 630 mm Swing diameter over bed: 1,300 mm Swing diameter over carriage: 1,000 mm Swing diameter over removable bed section: 1,700 mm Centre distance: 4,000 mm Bed width: 700 mm Spindle bore: 120 mm Spindle speed: 2.8 - 400 rpm MACHINE DETAILS Control: Conventional Dimensions & Weight Dimensions (L x W x H): 6,800 x 2,200 x 2,000 mm Rjdsydv N Uspfx Adasn Unladen weight: 11,000 kg Transport packages: 2 EQUIPMENT Documentation Three-jaw chuck Four-jaw chuck Removable bed section Quick-change tool holder Fixed steady rest Travelling steady rest

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 102, turning height: 1,250 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,550 mm, faceplate diameter: 1,250 mm, spindle speed (max.): 3,000 rpm, TECHNICAL DETAILS Turning height: 1,250 mm Workpiece weight: 8,000 kg Rjdoybbi Ispfx Adaon Turning diameter: 1,550 mm Faceplate diameter: 1,250 mm Faceplate speed: 200 rpm Spindle speed: 3,000 rpm Tool changer: 15 positions MACHINE DETAILS Control: Siemens 840 D Type of supply current: Alternating current (AC) Year of last overhaul: 2000 EQUIPMENT C-axis Infinitely variable speed 3-jaw hydraulic-mechanical chuck Coolant system Belt filter unit Internal coolant supply

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, overall weight: 80 kg, total length: 600 mm, total width: 500 mm, total height: 950 mm, operating pressure: 500 bar, TECHNICAL DETAILS Redpfx Asyf Akzsdaon Nominal flow rate: 9.2 - 1.6 l/min Max. pressure: 500 bar MACHINE DETAILS Dimensions & Weight Dimensions (LxWxH): 600 mm x 500 mm x 950 mm Weight: approx. 80 kg EQUIPMENT Unit is mobile (on wheels)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 2107308, controller model: Elgo P40T, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 13 mm, The machine was only in use for 3 years! The original price was €52,000! TECHNICAL DETAILS Working width: 3,100 mm Cutting angle (min.): 0.5° Cutting angle (max.): 3° Stroke rate (min.): 8 strokes/min Stroke rate (max.): 20 strokes/min Redpfx Aeydc Nbedasn Sheet thickness (max.): 13 mm Aluminum sheet thickness (max.): 10 mm Steel sheet thickness (max.): 13 mm Stainless steel sheet thickness (max.): 8 mm Back gauge adjustment: CNC controlled Back gauge: 1,000 mm MACHINE DETAILS Control: Elgo P40T Dimensions & Weight Total weight: 12,000 kg Dimensions (L x W x H): 4,000 x 2,200 x 2,100 mm Power: 22 kW Input voltage: 400 V Input current: 45 A Input frequency: 50 Hz Type of input current: Three-phase EQUIPMENT CE marking Finger guard Foot remote control Emergency stop button Safety light curtain

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,634 h, functionality: fully functional, machine/vehicle number: 051116206, turning length: 1,000 mm, rotational speed (max.): 4,000 rpm, bar passage: 52 mm, controller model: Fagor 8040 TC, TECHNICAL DETAILS Swing diameter over bed: 450 mm Swing diameter over cross slide: 215 mm Turning length: 1,000 mm Bar capacity: 52 mm Spindle speed: 4,000 rpm MACHINE DETAILS Control unit: Fagor 8040 TC Dimensions & Weight Machine dimensions (L x W x H): 3,000 x 1,995 x 2,001 mm Machine weight: approx. 2,400 kg Operating hours: 20,634 h Rjdpfx Adeycu Igeaon EQUIPMENT 4-position tool holder Tailstock Documentation

Condition: ready for operation (used), Year of construction: 2002, operating hours: 19,300 h, functionality: fully functional, turning length: 750 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 750 mm, swing diameter over bed slide: 320 mm, TECHNICAL DETAILS Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Turning length: 750 mm Travel X-axis: 185 mm Travel Z-axis: 750 mm Bar capacity: 52 mm Spindle speeds: 4,000 rpm Spindle nose: 55027/A6 DIN Spindle drive: 9 kW Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 8 m/min Tailstock quill diameter: 70 mm Tailstock quill stroke: 120 mm Tailstock taper: MT 5 MACHINE DETAILS Control: Heidenhain Manuel Plus Dimensions & Weight Machine dimensions: 2,450 x 1,668 x 1,825 mm Machine weight: approx. 2.0 t Operating hours: approx. 19,300 h EQUIPMENT Rjdpfx Ajycuvkodasn 3-jaw chuck Tailstock Multifix size B Documentation

Condition: ready for operation (used), operating hours: 28,339 h, functionality: fully functional, turning length: 450 mm, turning diameter: 300 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, controller model: Siemens 840D ShopTurn, TECHNICAL DETAILS Turning diameter: 300 mm Turning length: 450 mm X-axis travel: 160 mm Main spindle speed range: 5,000 rpm Counter spindle speed range: 5,000 rpm Bar capacity: 65 mm Tool holder: VDI 30 Driven tool stations: 12 Driven tool speed: 5,000 rpm Rapid traverse X-axis: 60 m/min Rapid traverse Z-axis: 45 m/min MACHINE DETAILS Control: Siemens 840D ShopTurn Dimensions & Weight Required space with chip conveyor: 6,895 x 2,284 x 1,885 mm Machine weight: approx. 4.3 t Operating hours Power-on hours: 59,643 h Spindle hours: 28,339 h EQUIPMENT Chip conveyor Sub spindle Hainbuch collet chuck 65 mm Rodpjycupqofx Adasn Hainbuch collet chuck 42 mm Parts catcher Conveyor belt C-axis Driven tools Documentation

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, bar passage: 60 mm, controller model: Siemens 840D Powerline, counter spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Spindle bore: 65 mm Bar capacity: 60 mm Main spindle max. speed: 5,000 rpm Counter spindle speed: 5,000 rpm MACHINE DETAILS Control: Siemens 840D Powerline Rjdpfxoya Ecvs Adaen Machine weight: 3,500 kg EQUIPMENT C-axis IEMCA bar feeder Master 880/33 HF (bar length up to 3,200 mm) KSS coolant supply / cooling unit Hinged belt chip conveyor

Condition: ready for operation (used), Year of construction: 1997, operating hours: 38,000 h, functionality: fully functional, machine/vehicle number: 325202, turning length: 305 mm, turning diameter: 210 mm, rotational speed (max.): 5,000 rpm, bar passage: 42 mm, controller model: Heidenhain Elektro Pilot 1190, TECHNICAL DETAILS Rsdpfxjyfgttj Adajn Swing diameter over bed: 440 mm Swing diameter over cross slide: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5,000 rpm Turret: 12 stations Tool holder: VDI 20 MACHINE DETAILS Control: Heidenhain Elektro Pilot 1190 Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,651 x 1,771 mm Machine weight: approx. 3,000 kg Power-on hours: approx. 38,000 h EQUIPMENT Coolant system Tailstock Documentation

Condition: ready for operation (used), Year of construction: 1998, operating hours: 17,000 h, functionality: fully functional, turning length: 305 mm, spindle speed (max.): 5,000 rpm, swing diameter over bed slide: 440 mm, bar passage: 42 mm, controller model: Heidenhain Elektro Pilot 3190, TECHNICAL DETAILS Rodpfxoycu A Ro Adasn Swing diameter over bed: 440 mm Swing diameter over carriage: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5,000 rpm Turret: 12 stations Driven stations: 6 stations Tool holder: VDI 20 MACHINE DETAILS Control: Heidenhain Elektro Pilot 3190 Dimensions & Weight Machine dimensions (L x W x H): 2,800 x 1,651 x 1,771 mm Machine weight: approx. 3,000 kg Power-on hours: approx. 17,000 h EQUIPMENT Chip conveyor C-axis Driven tools Parts catcher Tailstock Documentation

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Used By Malaysia Car Manufacturer Very well maintain & very less usages. KOJIMA PHD 1800 Rsdpfx Adjyf Swqsasn KOJIMA DBM 300 Both for sales