Used Hot Dog for sale (3,464)

Condition: new, machine/vehicle number: 357, Thermo Scientific Multiskan FC Microplate Photometer 357 with Incubator A wide range of applications, from enzyme kinetic studies to Lowry assays. The Multiskan FC covers a wavelength range of 340 to 850 nm, enabling a variety of different applications, from enzyme kinetic studies to Lowry assays. The instrument performs fast and accurate measurements. For example, a complete measurement of a 96-well plate is possible in less than seven seconds. The instrument is equipped with a linear shaker as standard. A model with an incubator reaches incubation temperatures up to 50 °C and is capable of reading 384-well microplates. The SkanIt software supports optimal use of the instrument through a visual workflow, effortless data analysis, and export functions. Features In addition to the common features of all microplate readers, the Multiskan FC offers: SkanIt Software The SkanIt software can be used to control the Multiskan FC and supports the optimal use of the instrument's functions with a visual workflow, easy data analysis, and export functions. Wide Wavelength Range A wavelength range of 340 to 850 nm for a variety of applications such as ELISA immunoassays, protein quantification, endotoxin, cytotoxicity, and proliferation assays, enzyme assays, and growth curves. Pre-installed Filters Equipped with a filter wheel with eight positions and three standard filters, 405, 450, and 620 nm. Additional filters are easy to install and can be ordered. Proven Performance and Reliable Results Integrated self-diagnosis functions, IQ/OQ, and verification aids make this instrument reliable and trustworthy. Specifications Compatibility: Robotic Detector Type: Photodetector Incubator Temperature: Room temperature +4 °C to 50 °C Interface: User: Integrated or via PC Light Source: Quartz glass halogen lamp Measurement Speed: 7 s for 96-well plate (fast mode), 13 s for 96-well plate (normal mode) Measurement Technology: Absorption Plate Type: 96-well plate, 384-well plate Product Line: Multiskan™ Shaking: Linear Software Type: SkanIt Software Wavelength Selection: Filter Accuracy: ± 1% (0 to 3 Abs) or ± 0.003 Abs. The larger value at 405 nm applies. Depth (US): 15.7 in. Depth (metric): 40 cm Filter: Filter wheel with eight slots; installed filters: 405 nm, 450 nm, and 620 nm Height (US): 8.7 in. Height (metric): 22 cm Hertz: 50/60 Hz Linearity: 96-well plate: 0 to 3 Abs, ±2% at 405 nm 384-well plate: 0 to 2.5 Abs ±2% at 405 nm Precision: CV ≤ 0.2% (0.3 to 3 Abs) at 405 nm Resolution: 0.001 Abs Voltage: 100/240 V Wavelength Range: 340 to 850 nm Width (US): 11.4 in. Dcedpfxjtt R Syj Ailon Width (metric): 29 cm Unit Size: Each You can find more items in other sizes – new and used – in our shop! International shipping costs on request!

Condition: good (used), Loypack One shot chocolate depositor Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph Dcodpsmqm E Rofx Ailen

Condition: good (used), Loypack One shot chocolate depositor Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph Dcodpfxsmqm E Uo Ailjn

Condition: excellent (used), Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs -Spare and wear parts: for shot peening system continuous blasting system -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. Dcodpfjwaiv Uox Ailjn -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete -Total weight: 452.4 kg

Condition: ready for operation (used), Siemens 1HC5106-0EJ16-1RU7-Z Motor SN: E0T86884001004 with Hübner Long Life Tacho TDP 0.09LT-3 - Z = A11 / G30 / K18 (radial shaft seal, oil-tight (oil-tight flange) - IP65), used, in good condition, 100% functional, delivery as shown in photos. ATTENTION: Please enquire separately for packaging and shipping costs! Dcedpex Dvd Rofx Ailjn

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Graco Tank-Free Hotmelt Delivery System Dcodpfxowigbme Ailen Invisipac HM 25 Year 2020 For delivering and dispensing hot melt adhesive pellets. For professional use only. 1200 psi (8.3 MPa, 83 bar) Maximum Working Pressure 400°F (204°C) Maximum Fluid Operating Temperature 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Proven adhesive savings, unsurpassed reliability. Unlike conventional tanks and many "tankless" systems, the InvisiPac system's patented Melt-on-Demand technology ensures a constant flow of adhesive that melts quickly and is dispensed instantly. You save adhesive and costs due to unplanned downtime for maintenance. With the InvisiPac system's robust reporting capabilities, you have the data you need to make smart decisions for your line that can increase efficiency, reduce costs, minimize downtime, and improve productivity. Better performance: No clogged nozzles; No carbon-filled containers; Fast startup in as little as 10 minutes; Improved operator safety; High performance with a sustainable component; Greater cost savings; Consistent adhesive viscosity; No material damage; Little to no waste; Better dispensing control; Use the adhesive of your choice

Condition: used, New: No Part suitable for: trucks Damage: none VAT/differential taxation: VAT deductible Dcsdsur S E Hepfx Ailsn

Condition: good (used), Light barrier, safety light curtain, reflection light barrier, light barrier, safety light curtain, reflection light barrier, photoelectric sensor, light sensor, light grid Dcsdpfetuyb Hjx Ailon -Manufacturer: ABB Jokab Safety, Light Curtain FRII -4-14-1200 -Protective field height: 1190 mm -Voltage: 24 VDC -Number: 2x module available -Price per piece -Dimensions: 1250/40/H50 mm -Weight: 2.6 kg/piece

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits Djdpfxoxqzmks Ailocn The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: ready for operation (used), -----Konica Minolta Bizhub C 3350i----- Tested and ready for operation! Many units available As an experienced retailer of used copiers, we have developed genuine expertise in packaging and pallet shipping to ensure our customers receive machines in perfect condition. We supply copiers sourced from and maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask. Our company offers the widest selection of Konica Minolta production copiers and can arrange worldwide shipping upon request. Djdpfowyncmex Ailscn Please feel free to contact us for further information.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM 14x6/2S/2WX1M with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotary tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the outer surface of parts placed on a rotary table. The machine is equipped with two rotary tables. Rotary table diameter: 1400 mm Maximum product height: 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours: 5275 Commissioning date: March 31, 2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Blast wheel, number and type: 2 WX1M Outer diameter of the blast wheel: 330 mm Blast wheel speed: 2900 rpm Amount of abrasive material discharged per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotary table diameter: 1400 mm Rotary table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Dcsdpezwqyyofx Ailsn Maximum torque on the spindle: 2500 Nm Distance of the spindle axis from the clamping surface of the table: 60-560 mm Maximum workpiece weight: 1500 kg

Condition: excellent (used), Year of construction: 2019, Wide-belt sanding machine Manufacturer: Houfek Type: SPB 910 Buldog 5 Dodpfxjztrk Sj Ailjcn Year of manufacture: 2019 Sanding width: 910 mm Sanding belt: 2,200 x 1,010 mm Workpiece thickness: 3 - 160 mm Sanding motor power: 11 kW Feed rate: 4.5 / 9 m/min Feed motor power: 0.55 / 0.75 kW Sanding belt speed: 18.5 m/sec Weight: 1,210 kg

Condition: new, Year of construction: 2026, functionality: fully functional, air demand: 15 m³/h, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, inner dimension width: 2,000 mm, inner dimension height: 650 mm, volume flow: 12,000 m³/h, tank capacity: 2,500 l, air pressure: 6 bar, suction capacity: 12,000 m³/h, New RB-2000 Conveyor Blast System Description: The RB-2000 conveyor blast system from ABRAZIV Kft. was developed for the economical surface treatment of steel sheets, profiles, tubes, and welded structures and is ideally suited for descaling, derusting, cleaning, and roughening steel surfaces. The system is manufactured to order and can be individually configured according to the customer's requirements. With a passage width of 2,000 mm and a workpiece height of up to 650 mm, the RB-2000 is particularly suitable for large and heavy workpieces. It offers maximum flexibility for demanding applications in steel construction, mechanical engineering, tank construction, and the metalworking industry. The RB-2000 is equipped with four high-performance ABR-500 blast turbines. Two turbines are arranged above and two below the conveyor, ensuring optimal coverage of the cross-section and a uniform blasting result. The inner surfaces of the blasting chamber are lined with highly wear-resistant manganese steel. Other areas are protected by wear-resistant rubber, which simultaneously reduces noise levels. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning, and dosing system ensures reliable and economical operation. All functions of the system are operated via a central control unit. In addition to automatic operation, a manual mode is also available for maintenance work. Technical Data Passage Passage width: 2,000 mm Min. workpiece length: approx. 1,500 mm Max. workpiece height: 650 mm Blast Turbines Number: 4 Type: ABR-500 Turbine diameter: 500 mm Speed: 2,600 1/min Blasting media flow rate per turbine: 150–300 kg/min Conveyor Load capacity: 1,500 kg/m Speed range: 0–4 m/min Power Requirements Base machine: 59–103 kW Cartridge filter: 15 kW Compressed air: min. 6 bar Compressed air consumption (filter): 15 m³/h Other Data Blasting media capacity: 2,500 kg Dsdpfx Aozikaqeiljcn Recommended blasting media grain size: 0.4–1.2 mm Extraction capacity: 12,000 m³/h Mains voltage: 3 × 400 V Control voltage: 230 V Frequency: 50 Hz Optional Frequency inverter Extended conveyors Automatic height scanning Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Application Areas The RB-2000 is particularly suitable for: Steel sheets Steel profiles Tubes Hollow profiles Welded structures Steel construction Mechanical engineering Tank construction Contract blasting operations Location / Manufacturing Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we develop and produce our conveyor blast systems individually according to customer requirements. In addition to the RB-2000, other sizes and special versions are available. We will be happy to advise you on the design of the appropriate system and provide you with a non-binding offer. Price on request.

Condition: used, New: No Part suitable for: trucks Price: On request Dcedsywtfzspfx Ailjn VAT/margin scheme: VAT deductible

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 570 kW (774.98 HP), overall weight: 4,000 kg, type of input current: three-phase, pressure: 6 bar, temperature: 120 °C, Equipment: documentation/manual, hot water, type plate available, Mobile oil-fired heating system in a 20-foot container – Buderus 570 kW / Weishaupt burner – Year of manufacture 2023 (can also be converted to gas operation) We are selling our mobile oil-fired heating system because we have switched to solar energy. This system served as an emergency or supplementary heating system for us, is 100% ready for operation and is sold as is – including stainless steel chimney, electrical distribution panel and complete interior fittings. Technical data: Boiler: Buderus Logano plus GE615, output 511–570 kW (rated output), max. 120 °C, 561 l water content, PMS 6 bar Burner: Weishaupt WM-L10/3-A monarch, T-3LN multiflam®, year of manufacture 2023, heating oil EL (200–900 kW), NOx class 3 Power supply: 230 V / 400 V, 50 Hz, protected by Hensel main distribution panel (3x63 A) with CEE connections Container: 20-foot standard container (approx. 6.06 × 2.44 × 2.59 m), approved for road transport, insulated and equipped with lighting Stainless steel chimney mounted externally, tensioning cables included Complete internal piping with insulation, circulation pumps, water treatment Flexible in terms of fuel: The Buderus GE615 is a condensing oil/gas boiler and can be converted to gas operation with a single adjustment (replacement or modification of the burner) – perfect for locations with a gas connection. Possible applications: Ideal as a mobile large-scale heat source for construction projects, larger building complexes (e.g. as interim heating until the final heating system is commissioned), heating for large halls or for supplying hot water to larger projects. After connecting the piping or via hoses to the existing taps, it is immediately ready for operation. Procedure: The piping will be disconnected from the tap by us. Afterwards, the container can be picked up with a suitable truck (container transport) and set up at the new location. For commissioning (and possibly conversion to gas operation), we strongly recommend involving a qualified plumbing/heating specialist so that all settings on the boiler and burner can be made professionally. Dsdpfsy Sz Rusx Ailocn Original purchase price 2023: approx. 150,000 € Selling price: 65,000 € negotiable – serious offers are welcome, just write to us. Inspection possible at any time by appointment. If you have any questions, please do not hesitate to contact us!

Condition: excellent (used), Year of construction: 2018, clamping force: 500 kN, Equipment: documentation/manual, Clamping force - 500/650 kN Injection cylinder diameter - 27 mm Theor. Cylinder volume - 50 cm3 Centering circle diameter - 125 mm Min. mold height - 210 mm Max. mold height - 460 mm Max. opening of the cap - 600 mm Distance between columns (vertical) - 320 mm Distance between columns (horizontal) - 360 mm External dimensions of the clamping plate (w x h) - 500 x 470 mm Number of hydraulic cores - 0 Number of pneumatic circuits - 2 Djdpfx Aozn Uqwjilecn Max. ejector stroke - 70 mm Power consumption - 30 kW Equipment / Options: 1. Power transformer AC400V → AC200V 2. Air ejector – 3 circuits 3. Reject part detection 4. Euromap E67 5. USB interface 6. Parallel mould movement / dosing 7. Parallel mould movement / ejector 8. Pre-injection function 9. Precision dosing function 10. Screw check valve backflow measurement 11. Shut-off nozzle – software 12. Hot runner valve gates – 8 circuits (software) 13. Communication with temperature controllers (software) 14. Intelligent mould protection 15. Intelligent ejector protection 16. Tool kit 17. Fuse kit 18. 21 freely programmable inputs/outputs 19. 2× analogue inputs 0–10 V DC 20. Alarm beacon with audible signal 21. Czech operating manual 22. 1-day operator training at customer site 23. Commissioning 24. Automatic clamping force correction during operation

Condition: like new (used), Year of construction: 2019, operating hours: 399 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 48 mm, clearance between the columns: 650 mm, displacement volume: 318 cm³, injection pressure: 1,900 bar, mold height (min.): 250 mm, ejector force: 35,000 N, ejector stroke: 150 mm, opening stroke: 550 mm, plate length: 900 mm, plate width: 900 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S-220iA – fully electric injection moulding machine, year 2019 Very lightly used precision injection moulding machine with only 399 operating hours. The FANUC ROBOSHOT Alpha S-220iA combines high repeatability, dynamic movements and energy-efficient production. Suitable for demanding technical plastic parts and reliable series production. Dcedpfx Ajznd Dyjilsn Technical data: - Clamping force: 2,200 kN (220 t) - Double-toggle clamping mechanism - Tie-bar spacing: 650 × 650 mm - Platen size: 900 × 900 mm - Mould height: 250–750 mm, extended version - Clamping stroke: 550 mm - Ejector stroke: 150 mm - Maximum ejector force: 35 kN - Screw diameter: 48 mm - Shot volume: 318 cm³ - Maximum injection speed: 200 mm/s - Maximum injection pressure: 1,900 bar - Locating ring: Ø 160 mm - Fully electric drive Control and equipment: - FANUC 31i-B CNC control - 15-inch LCD touchscreen - AI mould and ejector protection - Precision metering and pressure-profile functions - Automatic mould-height adjustment - Energy-consumption measurement - Euromap 67 robot interface - Three independent air valves - Cascade control for up to eight valves - USB and memory-card output - Four-circuit flow meter The machine is in like-new condition and fully operational. Inspection is available by appointment. Price, delivery time and further information are available on request.

Condition: refurbished (used), functionality: fully functional, air demand: 6 m³/h, compressed air connection: 6 bar, warranty duration: 6 months, workpiece weight (max.): 800 kg, Fully Overhauled Rubber Belt Blasting Machine GH-4 For sale is a fully overhauled rubber belt blasting machine GH-4, professionally refurbished by the manufacturer ABRAZIV. This machine is ideally suited for deburring, descaling, cleaning, and surface roughening of castings, forgings, press parts, and other bulk goods. Its robust design and reliable blasting technology make it versatile for use in foundries, forging shops, and the metalworking industry. The machine has been professionally overhauled (refurbished) and is in perfect technical condition, like new. It is immediately available and can be inspected by appointment. Technical Data Blasting Chamber Rubber belt width: 1,300 mm Belt drum diameter: 1,150 mm Maximum batch weight: 800 kg Blasting media capacity: 800 kg Blasting Turbines Number of turbines: 2 Power per turbine: 11 kW Connection Values Electrical connection power: 27.5 kW Compressed air connection: 6 bar Compressed air consumption: 6 m³/h Extraction capacity: 5,500 m³/h Condition Fully overhauled (refurbished) Technically inspected Immediately available As the manufacturer, we can also offer you the following services, if desired: Transport Installation Commissioning Operator training Spare parts supply Dcodpfx Ajzicuajilon Maintenance and service Location: Kecskemét, Hungary Inspection is possible at any time by prior appointment. Price on request.

Year of construction: 1995, condition: excellent (used), MONORAIL HANGER SHOT BLASTING MACHINE WITH WETFILTER Designation: Monorail Hanger Shot Blaster Brand : Schlick Type: DHB 12/14 Workpieces ø: 1.200mm Workpieces High max.: 1.400mm Dcodod Hp Sqepfx Ailon Charge max. kg: 500kg Shot Wheel: 3 Pieces with 7,5kw with Drivers Consisting of: - Monorail Hanger Shot Blaster Typ: DHB 12/14 - O-Hanger System with Workpieceshangers - Main Panel - Wet Filter Wir bieten auch Ersatzteile für Rösler, Schlick, Wheelabrator, Gietart usw. Strahlanlagen an! We can offert for spare Parts for Rösler, Shot Blasting Machines!

Condition: new, functionality: fully functional, Year of construction: 2025, Laser source - MAX Photonics Table size - 4000x2000mm Control system - FSCUT 6000 Software - Cypnest+Cypcut Laser head - Boci BLT442 Nitrogen proportional valve - SMC Power stabilizer - 120kVA Water cooler - Hanli Load capacity up to 3200kg Laser power - 12000 W X/Y positioning accuracy - ±0.05 mm/m X/Y repeat positioning accuracy - ±0.03 mm/m Maximum travel speed - 120 m/min Maximum acceleration - 1.5 G CNC control - FSCUT 6000 EtherCAT-BUS Power supply - 380V 50Hz three-phase Dcsdpfx Aswnqbzeilen

Condition: used, functionality: fully functional, Nicolis Shot Peening System Dedpjzhurnofx Ailjcn Media reclaim

Condition: like new (used), Year of construction: 2019, clamping force: 2,200 kN, Equipment: documentation/manual, Fanuc FANUC ROBOSHOT Alpha S220iA (2019) _FANUC Roboshot α-S220iA – Equipment List_ _Basic Technical Specifications_ 1. Clamping force: 2200 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 1900 bar 4. Min./Max. mold height: 250–750 mm (extended) 5. Clamping stroke: 550 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Locating ring: Ø 160 mm 8. Ejector stroke: 150 mm 9. Screw diameter: 48 mm (318 cm³) 10. Screw/barrel: W/C (hardened, high wear & corrosion resistance, up to 350 °C, 30% GF) 11. Nozzle: Standard open R19D4 _Control & Software (FANUC 31i-B CNC)_ 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function Dcedpfx Ajzkttcoilen 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function _Standard Machine Equipment_ 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian) _Clamping Unit Specifications_ 1. Mechanism: Double toggle 2. Clamping force: 2200 kN / 220 tonf 3. Die height (single platen): 250–650 mm _(opt. 250–750 mm)_ 4. Clamping stroke: 550 mm 5. Locating ring: Ø 160 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Platen size (H×V): 900 × 900 mm 8. Min. mould size (H×V): 375 × 375 mm 9. Ejector stroke: 150 mm 10. Max. ejector force: 35 kN / 3.5 tonf

Condition: new, 0 1170 x 880 x 825 mm operating pressure 2,5 - 8,0 bar dimensions 1,33 x 1,24 x 1,77 m Dcedpoupxdwsfx Ailsn air consumption at 6 bar 350 l/min weight of the machine ca. 0,16 t

Condition: used, mileage: 33,596 km, power: 74 kW (100.61 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 2,700 kg, maximum load weight: 2,300 kg, overall weight: 5,000 kg, axle configuration: 4x4, wheelbase: 2,500 mm, brakes: other, color: green, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, operating hours: 5,333 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, German vehicle, first owner, LADOG T1400, condition as shown in photos, original mileage of only 33,596 km, only 5,333 operating hours. Three-way tipper with Fassi crane mounted behind the cab, Fassi crane model F28B.22, hook height 8 m. Lifting capacities: 1.85 m = 995 kg, 3.10 m = 765 kg, 4.30 m = 545 kg, 5.50 m = 395 kg. Equipped with 5th and 6th hydraulic control circuits, 2 hydraulic outriggers, height-adjustable municipal work platform with hydraulic connections, four-wheel steering, EasyDrive (hydrostatic drive), 2 trailer hitches, trailer load 3,500 kg. Tipper dimensions: length = 2,100 mm, width = 1,400 mm, height = 300 mm. Aluminum side panels, Dücker UNA 200 flail mower available at extra cost, high bulkhead, power steering, differential lock, 2 comfort seats, roof hatch, rear window, sliding window, municipal lighting and headlights, beacons. Wheelbase: 2,500 mm, gross vehicle weight: 5,000 kg, unladen weight: 2,700 kg, payload: 2,300 kg. If a new TÜV inspection is desired, we would be happy to provide you with an offer via our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new safety inspection (SP), without new accident prevention inspection (UVV). You can find more trucks on our homepage at Dedevhqhpjpfx Ailjcn We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend a viewing and inspection of the equipment to avoid any misunderstandings regarding the condition and suitability of the item. Inspections and viewings are possible and expressly desired at any time by appointment. All information provided without liability. No responsibility is taken for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and features of the vehicle/equipment. Subject to change, prior sale, and errors.

Condition: used, This listing is for the Stuart CR302 Infrared Hotplate stirrer The unit is in full working condition and is ready for immediate use Overview & Key Features Infrared (IR) Heating: Utilizes a 900 W infrared heater—this allows it to boil 1 litre of water over 30% faster than standard 1200 W ceramic hotplates. Powerful Magnetic Stirring: Equipped with rare-earth magnets, it can stir up to 15 litres of liquid. Stirring speed is adjustable, ranging from 100 to 1500 rpm, with feedback control to maintain steady rates. Temperature Capability: The hotplate can reach a maximum temperature of 400 °C. Size & Portability: Hotplate surface: 30 × 30 cm Overall dimensions: approximately 32 × 37 × 11 cm (W × D × H) Dcedpfx Ajxhfq Usilon Weight: about 4 kg Power Supply: Designed for use with 240 V, compatible with standard UK lab mains at 50/60