Used Hot Dog for sale (3,429)

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1522, We are offering this well-maintained H&H AI 008 hot air taping machine, manufactured in 2015. Manufacturer: H&H Model: AI 008 Year of manufacture: 2015 Condition: good Category ID: 677 Type ID: 2467 Machine type: Hot air taping machine Kdjdpfx Aszdy Rbobnjr If you have any questions or require further information, please do not hesitate to send us a message or call us. The machine is located at our production facility in Mönchengladbach and can be inspected and tested there during normal business hours. It was in use in our production facility until recently. It is perfectly suited for waterproof seam sealing.

Condition: excellent (used), Year of construction: 2011, operating hours: 361 h, functionality: fully functional, machine/vehicle number: 7428122100001.105, pressure: 6 bar, power: 16,500 kW (22,433.73 HP), temperature: 120 °C, operating temperature: 120 °C, total height: 4,300 mm, total length: 8,700 mm, nominal heat output: 165 kW (224.34 HP), total width: 3,700 mm, tank capacity: 33,500 l, empty load weight: 35,000 kg, We offer this Viessmann VITOMAX 200 hot water boiler in very good condition, manufactured in 2011. It is currently stored and preserved with nitrogen. Manufacturer: Viessmann Model: VITOMAX 200 Year of manufacture: 2011 Type: hot water boiler Operating hours: 361 If you have any further questions or require additional information, please do not hesitate to send us a message or call us. Kdsdpfxjzlc Ede Abnjr Ioan Munteanu

Condition: excellent (used), functionality: fully functional, Feller hot runner controller, 70-channel. Prepared for expansion to 80 channels! In excellent condition, sourced from a cleanroom injection molding facility in the medical technology sector. Kdedpfszdu Hqex Abnsr The original new price was over €20,000.

Condition: used, Year of construction: 2010, operating hours: 3,426 h, functionality: unexamined, pressure: 6 bar, power: 12,600 kW (17,131.21 HP), temperature: 110 °C, operating temperature: 110 °C, total height: 3,025 mm, total length: 6,315 mm, nominal heat output: 12,600 kW (17,131.21 HP), total width: 2,724 mm, insulation thickness: 100 mm, tank capacity: 18,300 l, We offer this Buderus S825L-12600 hot water boiler, in very good condition, manufactured in 2010. Type: S825L-12600 Maximum permissible pressure: 6 bar g Test pressure: 9.6 bar g Maximum permissible temperature: 110 °C Nominal thermal power: 12600 kW Total volume: 11830 l Serial number: 31022150-00-106809 Month/year of manufacture: 08/2010 Manufacturer: Bosch / LI LA Kdedozlqb Tepfx Abnsr If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Ksdpjq U Sa Sefx Abnsdr Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: like new (used), Year of construction: 2025, Hot wire cutting system Manufacturer: MANZ Kdedpfx Abjznli Djnsr PLC control, touch screen display, Siemens

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 179057653, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance from spindle nose to tailstock reference point: 639 mm - X1/X2 axes travel (working stroke): 335/289 mm / Rapid traverse in X: 30 m/min - Z1/Z2 axes travel: 560/494 mm / Rapid traverse in Z: 30 m/min - Fully enclosed with automatic door opening, supporting manual or automatic loading Main Spindle - Spindle according to DIN 55026: Size A6 - Max. speed: 4,500 rpm - Power at 100% / 40% duty cycle: 23 / 18 kW - Torque at 100% / 40% duty cycle: 146 / 115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Toolholder with Powered Tools - Cylindrical shank holders per DIN 69880: 8 - VDI40 - Max. tool length: 130 mm - Number of positions: 1 x 8 Kdodpfxjxxinfj Abner - Max. speed: 4,500 rpm - Max. torque at 10% / 100% duty cycle: 27 Nm / 14 Nm Turret Configuration X2/Z2: Toolholder with Powered Tools - X-HOT unit for polygonal turning, max. eccentricity (stroke): 8 mm - X-HOT tool clamping system: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length = 3,000 mm (6,477 mm with chip conveyor), Width = 3,000 mm, Height = 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design for optimum chip removal, suitable for manual or automated loading/unloading - Siemens 840D control, NC1 and NC2 axes - High precision: Positioning accuracy in X, Z axes ±0.002 mm (Heidenhain linear scales) - Powerful main spindle with a wide speed range - Live tooling extends machining capabilities to drilling and milling - Tool life monitoring - Chip conveyor: Knoll - Coolant system filtration up to 40 bar: Knoll FKA/1400 - Workpiece presence detection with low pressure sensor - ROBOT AUTOMATION INFRASTRUCTURE INSTALLED - Fully enclosed work area; integrated lighting - Documentation: available both electronically and as hard copy Machine status: Not operational - Missing: valve for emulsion circuit and inductive sensors

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips/lippings (Min/max) mm 3 / 10 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system) Distance (center-axes) of the Disappearing Dogs (mm) 1080 SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x kW 8) Free Space (for Milling unit) EDGE-BANDING PART (for each side): Kdsdpfx Abod Nt Rqsner Glueing Unit (Hot Melt Glue) 04.1570 + 283.205 Band Pressure zone - Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) speed 30 m/min (0° - 25) Fine Trimming unit 08.055 (2 x Kw 1) / 0° - 30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) with servo-motors Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (4 x Kw 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270°

Condition: like new (used), Year of construction: 2026, operating hours: 22 h, overall weight: 1,500 kg, We offer a demonstration table-type shot blasting machine – high-quality Czech production, using quality materials in its manufacture. Type – TSM1. Number of operating hours – 22. - Turntable diameter – 1000 mm - Maximum height of the blasted part – 550 mm - Overall machine height – 2750 mm - 1x blasting turbine – power consumption – 5.5 kW, turbine with a frequency converter for regulating the turbine rotation speed. The turbine has both left and right rotation directions, as needed. - Abrasive conveying system – power consumption – 0.75 kW. - Table rotation – power consumption – 0.75 kW - Total machine power consumption – 7 kW. The cabinet is lined with manganese steel. We also manufacture table-type shot blasting machines with a table diameter of 1500 mm. A significant advantage of the machine is the ability to change the turbine rotation direction to either right or left. Shot blasting equipment with CE certification. Another advantage of the equipment is its high efficiency during shot blasting, quiet operation, low energy consumption, and the requirement for a small space for installation. In its category, this table-type shot blasting machine can be considered very well-designed. Kdedeztvclepfx Abnjr (Sandblaster, sandblasting, shot blasting, sandblasting equipment, shot blasting equipment, shot blasting machine). Blast machine.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, working width: 760 mm, Mamy przyjemność zaoferować Państwu profesjonalny laminator termiczny ECOSYSTEM COMPACT 76, idealny do zastosowań przemysłowych w zakresie uszlachetniania druku. Urządzenie zostało zaprojektowane z myślą o wysokiej wydajności, niezawodności i precyzji laminacji różnorodnych materiałów. DANE TECHNICZNE • Maks. format arkusza (szer. x dł.): 760 x 1060 mm • Minimalny format arkusza: 210 x 250 mm • Maks. prędkość mechaniczna: 60 m/min* • Wydajność podajnika: do 10 000 arkuszy/godz.* • Gramatura papieru: 115 – 600 g/m² • Maks. szerokość folii: 750 mm • Średnica rolki z folią (maks.): 350 mm • Średnica wewnętrzna rolki z folią: 3” • Wysokość robocza (z paletą): 900 mm Kdjdpfxeypd Szj Abnjr • Maks. waga stosu (z paletą): 750 kg *Wydajność zależna od materiałów i doświadczenia operatora. ZASILANIE I INSTALACJE TECHNICZNE • Zasilanie: 400 V, 3-fazowe + PE, 50 Hz • Moc zainstalowana: 31 kW • Sprężone powietrze: 700–900 nl/min przy 8 bar (Sprężarka nie wchodzi w zakres dostawy.) ZESTAW ZAWIERA • Automatyczny podajnik z elektronicznie sterowanym stołem ssącym (system PIAB) • Odwijak folii z przycinaniem bezpośrednim • Zespół laminujący z chromowanym kalandrem i gumowym wałkiem dociskowym • Zewnętrzny podgrzewacz wody z armaturą i zaworami • Grupa separacyjna z systemem nacinania folii • Gorący nóż z laserem korekcyjnym Scatec – do cięcia folii metalizowanych PET, nylonowych, tłoczonych i specjalnych. Opis funkcji: System gorącego noża umożliwia precyzyjne i czyste oddzielenie folii od krawędzi arkusza po laminacji, niezależnie od rodzaju materiału. Zintegrowany laser korekcyjny Scatec odpowiada za bieżącą kontrolę położenia arkusza oraz automatyczne dostosowanie pozycji cięcia, co zapewnia idealne wyrównanie folii względem krawędzi druku. To rozwiązanie minimalizuje błędy i zwiększa powtarzalność procesu, nawet przy dużych prędkościach produkcyjnych. • Automatyczna sztaplarka • Panel dotykowy sterowania • System zdalnej pomocy (Ethernet – po stronie klienta) • Instrukcja obsługi zgodna z normami CE • Zapasowa rolka dociskowa z łożyskami i specjalnym wózkiem

Condition: new, functionality: fully functional, machine/vehicle number: S.-Nr,: 20135, Brand new 24-zone hot runner controller, complete with all accessories as shown in the pictures. Kdedpew N Rd Dsfx Abnsr

Condition: used, Year of construction: 1986, functionality: limited functionality, We offer a continuous spray booth – Gutmann RZ – 1252. Year of manufacture: 1983 Inlet/outlet dimensions: 1200 x 350 mm (w x h) Turbines: 4 x 7.5 kW Electrical control panel, new in 2024, including frequency converters. Infeed conveyor: approx. 9000 mm Outfeed conveyor: approx. 9000 mm Filtration unit - Bartling Year of manufacture: 1996 Capacity: 6000 m3/h Motor power: 5.5 kW The machine is functional and still in operation. Kjdpfx Abozl Ryionodr The stated price is for the complete machine + control panel + filtration + conveyors.

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, Sheet size minimum: 290x400 mm Sheet size maximum: 640x900 mm Sheet thickness maximum: 0.75 mm Hot stamping size maximum: 620x840 mm Sheet edge free of print stamping (gripper edge): 8-10 mm Number of heating zones: 4 Cylinder diameter: 540 mm Backing thickness: 1.5 mm Height of the feed pile and pre-pile: 340 mm Height of the delivery pile: 510 mm Vertically adjustable hot stamping bed: -2...+0.4 mm Width of the stamping foil rolls (max): 840 mm Distance between the stamping foil rolls (min): 3.0 or 1.0 Outside diameter of the stamping foil rolls (max): 140 mm Foil pull rollers and programs (max): 4 Short pulls per program and cycle, number 1...99, length: 0...999 mm Kdodpjzatf Esfx Abnsr Intermediate pull per program and cycle, number as required: 0...999 mm Long pull per program and cycle, number 1, length: 0...999 mm Hot stamping die height: 7 mm Different hot stamping die height also available if required: 6.35 mm Machine speed: 600-4000 Hot stamping speed, max: 600-3000 Connected electrical load ratings (3-phase) for drive: 10.8 kW Connected electrical load ratings for heating and foil pull: 17.0 kW Voltage: 3x400V, 50Hz Overall dimensions: Length of the machine: 4000 mm Width of the machine: 2540 mm Height of the machine: 1950 mm Support area of the base frame: 2.1 m² Work area: 5650 mm Length: 5650 mm Width: 3650 mm Total weight: 7500 kg.

Condition: good (used), functionality: fully functional, The hot runner system DPK 15 from Günther is for sale. The system has been checked for functionality by the manufacturer. The following inspections were carried out: Visual inspection, inside and outside Update from V1.56 to V1.6.7 Temperature calibration Kdodpfxszl R R Ue Abner Testing according to DIN VDE 0701 Both cables, STL/0/15 and TVK/3/15, are in good technical condition and correctly wired.

Year of construction: 1995, condition: used, functionality: fully functional, machine/vehicle number: 3521, Hot melt adhesive application machine, type ZP 9290 - Tank capacity: 90 liters - Heating power: 5.5 kW - Melting capacity: 12 kg - Electrical connection: 400 V - Wiring diagram and operating instructions / other documents are included or available Ksdpfx Ajzrm Hlobnsdr Inspection possible by appointment in 06502 Thale.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 500 kg, See also homepage: bdtronic.com/de-de/heissnietanlagen/vollautomatisch-heissnieten/ Furthermore, there are other similar machines. Kdedpfoy Nzhbex Abnsr Currently physically located at the subsidiary plant.

Condition: used, functionality: fully functional, FABBRI F85 115 kW forced-air furnace Specifications: • Condition - used • Manufacturer - FABBRI • Model - F85 • Year of manufacture - 2001 • Maximum power - 115 kW • Max. capacity - 6300 m3/h • Controller included • Power supply 220 V • Outlet ducts - 2 x 250 mm • Chimney outlet - 180 mm • Exhaust turbine on the chimney • Fuel hopper dimensions: 56 x 56 x 730 cm • The furnace is ideal for burning wood or briquettes • Overall dimensions - 160/120 x 80 x 232 cm (length/length without turbine x width x height) Additional information: • The machine is in good technical condition and ready for immediate use • The photos shown reflect the actual condition of the item for sale • Possibility to turn on and test the device on-site • Free training on machine operation (at the company's premises) • The price stated in the auction does not include VAT and transport costs Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers Kdodpfx Abeza H Uyjnsr • We offer financial support in the form of leasing or a lease loan

Condition: ready for operation (used), functionality: fully functional, Hot stamping machine Semi-automatic Mechanical sliding table Temperature and timer control Stamping plate size: 35 x 24 cm Various replacement plates Kdsdpfezq Uuuox Abnsr In addition, inking unit included (disassembled)

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame Kjdpjzph N Aofx Abnjdr – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 80-91, These carton erector and box closer machines has been manufactured to handle and transfer of packing products in order to avoid their damage. Ksdpfx Aory T Acsbnedr The machines have been thought to work with the most habitual boxes of different sizes.

Condition: excellent (used), Year of construction: 1999, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 4204, pressure: 6 bar, total width: 1,700 mm, inner dimension width: 1,700 mm, workpiece weight (max.): 3,000 kg, turntable diameter: 1,400 mm, We offer this shot blasting machine manufactured by Carlo Banfi in 1999 and completely overhauled by METAL SERVICE s.r.l. in 2024. Rotating barrel machine with metal ribs Capacity: 3,000 kg Diameter: 1,400 mm Chamber width: 1,700 mm Magnetic separator Double turbine, each with a 30 kW electric motor and belt drive Complete with: Dust collection filter Loading hopper complete with guards Ksdpjznvtaefx Abnjdr Parts unloading conveyor belt Complete with CE certification, electrical diagrams, and operating and maintenance manual If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Double-side Sizing & Edge Banding - Independent Machine (1st &/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 12 Panels thickness (min/max) mm 8 - 100 Working width (min/max) mm 240 - 3000 Numerical Control Power Control PC22 (Windows XP) Software woodCommander Adjustable feeding speed (m/min) 10 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Kjdpfx Abett Iudenjdr Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) E34 Pressing rollers (revolver) both for straight and shaped edges (softforming) GL sextuple Edge coils supporting unit (No. of reels) 1 Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) 25 m/min (0°-30°) Fine Trimming Unit (2 x 0,55 KW) 0°-30° Corner-rounding unit FF12 (4 motors) WD70 20 m/min Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: used, Year of construction: 2012, functionality: fully functional, total width: 1,370 mm, total length: 2,950 mm, total height: 1,800 mm, We offer this used Profi Packer SCV 400 film wrapping machine, manufactured in 2012. Manufacturer: Profi Packer Model: SCV 400 Year of manufacture: 2012 Condition: used Category ID: 1262 Type ID: 907 Machine type: Film wrapping machine Machine dimensions (L x W x H): 2,950 x 1,370 x 1,800 mm Cycle rate per minute: approx. 65 cycles Kdedpfxozvdado Abnor Film thickness: 7 to 80 μm Includes infeed conveyor and hot air tunnel for heat sealing. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2016, Overview Complete craft microbrewery around a 250-litre batch brewhouse - the Slowbeer 250, built in 2016 by Škrlj d.o.o. (Slovenia). The package covers the whole process from malt crushing to bottling - brewhouse, two 1,000 L fermenters, hot water tank, glycol chiller, 4-spout bottling unit and malt mill. All main units date from 2016 - a turnkey set for a brewpub or a start-up brewery. Technical data - Brand: Slowbeer - main units built by Škrlj d.o.o., Slovenia - Model: Slowbeer 250 - Škrlj COMPACT BREWHOUSE MINI 250 L (type BHM 250, 2.5 hl) - Year of manufacture: 2016 - Batch capacity: 250 L - Heating: thermal-oil jackets, electrically heated - 400 V, 50 Hz - Material: stainless steel AISI 304 (EN 1.4301), vessel and jackets - Fermentation capacity: 2 x 1,000 L (nominal) Scope of Delivery Ksdpfx Ajzvqi Sebnsdr - Compact brewhouse | Škrlj (Slowbeer 250) | COMPACT BREWHOUSE MINI 250 L | 250 L per batch, thermal-oil heated, agitator with Bonfiglioli gear motor, Lowara CO350/03K/A wort pump (2019), Pedrollo NGA 1B thermal-oil pump, IPROS TP4001/15 plate heat exchanger, control cabinet with Omron frequency inverters | 2016 - Beer fermenters, 2 units | Škrlj | ZKG 1000 L | nominal 1,000 L each (1,230 L gross volume per vessel), AISI 304, atmospheric vessel 0-50 °C, water/glycol cooling jackets on shell and cone (3.0 bar operating, 6.0 bar test), sample valve, level indicator, CIP spray ball; recirculation pump with cleaning hoses plus one unused spare pump | 2016 - Hot water tank | Škrlj | 1200 L | AISI 304, electric heating 24.4 kW, 0-90 °C, CE 0531 | 2016 - Glycol chiller | MTA | TAEevo TECH 020 | 400 V / 3-ph / 50 Hz, 3.9 kW electrical input, refrigerant R410A, water circuit max. 6 bar, hose circuit for the fermenter jackets, digital temperature control | 2016 - Gravity bottling unit | Mori-Tem | MODERNA B.4 A LE | 4 stainless steel filling spouts, Ebara JESX M5 feed pump, 230 V single-phase 50 Hz | 2016 - Malt roller mill | Egon Sommer Maschinenbau | PICCOLO 11 SB | 1.1 kW three-phase motor (230/400 V) | 2016 Transport dimensions (palletised, approx.) - Brewhouse: 2,400 x 1,200 x 2,200 mm, 660 kg - Fermenters (each): 2,700 x 1,100 x 1,245 mm, 240 kg - Hot water tank: 1,210 x 1,210 x 2,245 mm - Glycol chiller: 1,300 x 600 x 955 mm, 220 kg - Bottling unit: 1,000 x 700 x 1,650 mm, 180 kg - Malt mill: 800 x 600 x 1,200 mm, 90 kg Condition Used - very good to excellent overall condition. Brewhouse, fermenters and malt mill in excellent condition; chiller and bottling unit in good working order. The hot water tank is fully functional, with a light cosmetic dent on the top cover and normal limescale deposits inside. CE declarations and technical documentation are available for every unit except the malt mill, where the documentation is still being confirmed. Availability Immediately. Location: Spain. Dismantling and loading by arrangement.

Condition: excellent (used), functionality: fully functional, Hot runner system for 20 channels With cable After a complete inspection, fully functional Kdsdpfox Hi R Ssx Abnsr PRICE REDUCTION FROM 1550 TO 1150 EUR!!!