Used Feeding Technology for sale (33,409)

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. Njdpekpwuuefx Ahvewd The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 V (DC) - Belt surface dimpled - Foldable stainless steel chute Weight 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: used, Feeding technology / feeding system / vibratory feeder / sorting unit / bowl feeder Vibratory bowl, sorting device / screw feeding with vibratory feeder for screwdriving applications Feeding system DEPRAG Type: 0622-P/0.75-1S No.: 1183884 Year: 2011 - 2012 The unit was used for feeding contact pins for electrical connectors. Product dimensions: Ø 4 mm, length 26 mm The pins are stocked in the material hopper; the conveyor belt transfers the pins as required into the bowl feeder. The bowl feeder, equipped with two sorting tracks, delivers the pins to the product turner. The product turner orients the product to the desired position and releases it for further processing. The unit comes from a prototype system. External electrical control is not included and should be provided by a PLC. Without modification, also suitable for automatic and correctly oriented feeding of threaded studs up to M4 x 26. The unit consists of the following components: 1 pc. belt hopper / feeding conveyor DEPRAG Type: B 10 Serial no.: 1178200 Order no: 415050A Year: 2011 Filling volume: 10 liters Nwodjh Ap Idopfx Ahvod Belt speed: 100 mm/min Operating voltage: 24 Volt (DC) - Belt surface: profiled - Foldable stainless steel chute Weight: 11 kg 1 pc. bowl feeder vibratory bowl KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm - Bowl feeder with two sorting tracks and two product outlets Operating voltage: 230 Volt, 50 Hz. 1 pc. DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Production no.: 35 pcs. FESTO product turner with 180° swivel range - 1 FESTO valve terminal CPV10-GE-MP-8 - 1 FESTO valve terminal CPV10-VI - Special pneumatic components (compressed air supply approx. 6 bar) - 2 pcs. MURR base modules type MVP12 - Complete unit mounted on a steel plate with 4 support feet Dimensions L x W x H: 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: used, Year of construction: 2017, Drawn, hydraulic folding, support foot / / wheel / / _____ / 10 ROTARY / TURNERS / BALLOON TYRES / WARNING WHEELS / LIGHTING / Nodpfx Ahjqrrpajvowd

Condition: used, Year of construction: 2014, Hydraulic folding, support foot / wheel, / rear attachment / _____ / hydr. inclined running device / drives Gyro transitions good condition / Nwsdpfx Aoqrrrrohvod

Condition: used, Year of construction: 2013, Loading stage, cross conveyor belt / _____ / 2 auger mixers / hydraulic support leg / rear discharge conveyor / Nwodpfx Asqrrtpjhvjd

Condition: used, Year of construction: 1996, working width: 6 mm, Equipment: lighting, Lighting, warning signs, balloon tires, / PTO shaft, / Digidrive system / / / Nsdjtyqm Hjpfx Ahvswd

Condition: used, Year of construction: 2011, Working width DIN (m) 13 / Transport width (m) 2.4 / No. of rotors 12 / No. of tine arms per rotor 6 / Trailed attachment / Tyres Super-Balloon 16 x 6.50 - 8 / Drive DIGIDRIVE® finger claw clutch / / Weight approx. (kg) 2550 / Edge spreading pr Nwsdpeqrrrgjfx Ahvod

Condition: used, Year of construction: 2015, First registration: / 01.01.2015 / _____ / machine type: SM-P-1-10ZK / incl. straw blower / hopper volume: 1000m³ / feed discharge on both sides / hydraulic support leg / mixing system: vertical mixer / scales defective! / Nwedpfx Ajqrryrohved

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser power: 100 W, laser wavelength: 1,070 nm, empty load weight: 1,200 kg, number of axes: 4, No reserve price – guaranteed sale to the highest bidder! Nedpfsxtmx Djx Ahvowd TECHNICAL DETAILS Fibre Laser: Power: 100 W Wavelength: 1070 nm Number of axes: 4 MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 160 x 140 x 170 cm Machine weight: 1,200 kg Bar Feeder Model: Iemca Elite 112 / Type: 32LL Bar feeder year of manufacture: 2010 Bar feeder dimensions (L x W x H): 420 x 60 x 140 cm Bar feeder weight: 500 kg EQUIPMENT Iemca Elite 112 bar feeder

Condition: used, functionality: fully functional, Fully automatic bagging system – completely dismantled and ready for collection Nwodjyw Rffopfx Ahvod For sale is a fully automatic bagging system, suitable for a wide range of bulk materials such as flour, pellets, and granulates. The system impresses with its high degree of automation and robust industrial design. Features and components: - Pneumatic bagging unit - Fully automatic sewing machine for sealing the bags - Rollers for flattening filled bags - Roller conveyors for in-plant transport - Robotic arm for automatic palletizing of the bags - Automatic pallet magazine - All electrical cables and control cabinets have been professionally dismantled The entire system has already been dismantled, neatly stored on pallets, and is ready for immediate collection. Comprehensive electrical documentation with schematics is available. Special features: Ideal for industrial applications with high throughput and automated processes. All components are perfectly coordinated, ensuring an efficient packaging and palletizing process. If interested or for further information, we are happy to assist you.

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, For sale: Industrial, fully automated cross-cut saw for trimming packages of lumber and structural components — a complete processing line for formatting bundles to a specified length. The machine is designed for use in sawmills and timber structure manufacturing plants, where process efficiency, precise length repeatability, and bundle stabilization during cutting are critical. The machine is available immediately — inspection and testing possible. Working parameters: Nwjdpoxn Rt Uefx Ahvod • Max. bundle size: 1300 × 1300 mm (width / height) • Max. input bundle length: 6000 mm • Max. cutting length: 3000 mm • Min. cutting length: 600 mm • Max. bundle weight: 8000 kg • Cutting accuracy: ±2 mm The minimum bundle cross-section is determined by the extreme positions of the hydraulic clamps — cutting of smaller bundles is permissible. Cutting module: • Main motor: 11 kW • HIWIN heavy-duty linear guides • GB TITANIUM guide bar + STIHL chain • Automatic lubrication system for the guide bar The robust construction of the cutting unit ensures operational stability and precise cutting length repeatability. Bundle stabilization: • 6-point hydraulic clamping system (top + side + before and after the cutting line) • Bundle alignment to vertical rollers • Elimination of bundle movement as the saw enters Process automation: • Intelligent bundle strapping system • Automatic determination of strapping points • Possibility of automatic base cutting • Discharge buffer for cut bundles Conveying and handling: • Cross infeed conveyor • Cross outfeed conveyor • Automatic discharge of bundles after cutting Waste removal: • Belt waste conveyor (~10 m) • Hydraulic tilt rollers in the cutting module (prevents jamming of large waste pieces) Automation: • Siemens PLC controller • Yaskawa servodrive and inverters • 21–22” operator panel • Remote service and diagnostics Additionally: • Winter package — control system heating • Delivery to customer — included • Installation — included • Commissioning — included • Operator training — included The machine is available immediately.

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: BR-BTRS-100-250003, As-new Brinkmann Technology BTRS100 screw conveyor, year of manufacture 2025, equipped with control unit, flushing valves, adapter pieces, adjustable motor power, and Easy-Clean cleaning package. We have only tested the screw conveyor. Due to a change in technology, it has never been put into operation. Manufacturer: Brinkmann Technology GmbH Year: 2025 Type/Model: BTRS100 Designation: BTPS100 pipe screw conveyor Serial number: BR-BTRS-100-250003 Power: 1.5 kW Nedoytql Nopfx Ahvowd Original price: €13,000 (net) Further documents (technical drawings, operating manual, invoice, etc.) available upon request. If you have any questions or require more information, feel free to send us a message or call us.

Condition: good (used), Koenig Rex Futura II roll plant. In very good ex bakery condition. Photos show machinery whilst in storage and before cleaning. Better photos will follow. Nwedsvth Auepfx Ahved

Year of construction: 2026, condition: refurbished (used), functionality: fully functional, construction height: 5,295 mm, outer diameter: 3,571 mm, screw conveyor diameter: 350 mm, machine/vehicle number: V-Mix 10.000PLR, sheet thickness stainless steel (max.): 4 mm, Equipment: CE marking, A conical mixer with a 10,000-liter volume (based on horizontal filling) is available. This mixer is composed of partly new and used components, all of which have been fully refurbished. All product-contact parts are made of stainless steel 304. Seals and lubricants are approved for use in the food or feed industry. - Capacity: 10,000 liters - Usable volume depends on the product - Vessel: stainless steel V2A - Gearbox: used, original Nauta Njdpfx Aeyrnd Hohvswd - Swing arm: standard steel, used, original Nauta - Crossbeam: used - Vessel: new, stainless steel V2A - Mixing screw: new, stainless steel V2A - Discharge: pneumatically operated, new - Drive motors: 11 kW & 1.5 kW, used - Adaptation for use in ATEX zoning possible The mixer comes with a new manual and CE marking. The mixer is completed and ready for prompt collection. Inspection is possible by appointment at our facility in Heerhugowaard, NL. If you have any questions, please do not hesitate to contact us.

Year of construction: 2015, condition: ready for operation (used), Two plasma machines Plasma Technology for surface cleaning and pretreatment are available. Vacuum chamber internal dimensions X/Y/Z: 190mm/190mm/320mm, vacuum chamber volume: 11.5l, plasma generator power: 400W, working pressure range: 0.05mbar-0.6mbar, max. process gas prepressure: 2bar, machine dimensions X/Y/Z: approx. 500mm/300mm/600mm. Documentation available. An on site inspection is possible. Nwsdpfx Aeyrg Hmjhved

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 1 x Fortress Technology Phantom metal detector / Driver Southall DS300 checkweigher combi unit with air-blast reject into lockable bins. Fitted with the following fail-safes - Reject confirmation, Bin-full monitoring and Low-air monitoring. Fortress Phantom serial number - EM1384. Driver Southall serial number - F4330. Date of manufacture - 2012. Metal detector aperture - 350mm W x 200mm H (133mm H useable). Weigh platform - 500mm L x 250mm W Loadcell - 5 kg (up to 3000g maximum weight). Nwjdpoynkpwofx Ahvjd Belt dimensions - 3250mm long x 245mm wide. Operating height - 890mm high. Medium frequency - 153 kHz. Overall dimensions - 3250mm long x 1100mm wide x 1930mm high. Electrical requirements - 230 V / 50-60 hz / 1 phase. Notes - can be fitted with spacing / metering conveyor which measures an additional 400mm long.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2412178161400128, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 200 mm, total length: 3,800 mm, total width: 1,900 mm, total height: 1,790 mm, rotational speed (max.): 40,000 rpm, The following machine is for sale: Pfeiffer Gantry Milling Machine SkyCNC WL2412 Ready to use! Complete package > Set up, connect, start working Condition: used, very good condition, fully functional Original price was: €98,000 The machine can be viewed under power at our premises. Nedpfx Ahoymznzsvewd Further detailed photos can be provided upon request. Affordable shipping (with suitable forklift on truck) can be arranged. TECHNICAL DATA: Vacuum table working area: 2500 x 1250 mm (medium format) Spindle: HSD 4.5 kW, 40,000 rpm, HSK E25 interface, liquid-cooled Z-axis: 200 mm Minimum quantity lubrication system All axes with ball screw drives Including electronic handwheel control Including automatic tool length measurement (automatic data transfer to the control system) External dimensions / footprint: 3800 x 1900 x 1790 mm Weight: 2150 kg Year of manufacture: 2015 Tool changer: 10-position + 8 manual tool tray slots (programmable for automatic changeover) Power connection: 3-phase 400V/AC, 63A fuse recommended (plug and cable included) High rigidity steel frame on 4 adjustable feet with stable linear guides. Suitable for processing non-ferrous metals, plastics, and wood. Cooling unit with pump (active cool 1500): 230V, 3.8A, max. 900W power consumption, 1500 W cooling capacity Weight: 41 kg, dimensions: L 450 x W 330 x H 600 mm Vacuum pump (Becker Germany) KVT 3.100 3.4 kW, designed for continuous operation, maintenance-free, 100 mbar vacuum, Weight approx. 100 kg Soundproof enclosure with insulation Dimensions: L 1050 x W 700 x H 570 mm Computer with control software: Fanuc ISO programming language, CAD system, machine setup program, extensive manuals on CD Further accessories included: 10x HSK E25 collet chucks, 6x CentroGrip® MR16 Mini HSK collet chucks, CentroGrip® collet set Ø1 – Ø10 (8 pieces), 2x CentroGrip® collet Ø8, 3x CentroGrip® collet Ø6, 2x CentroGrip® collet Ø10, MR16 Mini collets: 1x Ø1, 1x Ø2, 1x Ø2.5, 1x Ø3, 1x Ø4, 1x Ø5, 3x Ø6, 1x Ø7, 1x Ø8, 1x Ø8.5, 1x Ø10, 2 toolholder wrenches, 1 MR16 wrench, sealing gasket for vacuum table, vacuum felt support pads, 3 acrylic safety screens, 3D dial indicator Terms and Conditions: We guarantee that the machine is currently functional. No further guarantee is provided. Statutory warranty is excluded. Risk passes to the buyer upon loading. Payment must be made 100% in advance before loading. An invoice including VAT will be prepared and sent electronically (PDF) in advance. Any future costs, losses, or warranty claims arising from the customer’s use or non-use of the machine are excluded.

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm Nwsdpfxslatz De Ahvjd

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Njdjk Eakvepfx Ahvjwd Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: -230 V -0,7 A -50 Hz -IP 65

Condition: excellent (used), Year of construction: 2017, CNC RS 89.01 Nwsdpokuzzmjfx Ahvjd Glass thickness: 3 mm - 19 mm Technology: Precise CNC rail feed. Each disc can be used multiple times with different tool radius compensations for glass processing.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, We offer for sale a Bonded Panel Technology LTD (Duemas) Lamella Cutting System for mineral wool boards, complete with extraction unit, manufactured in 2014 and in very good technical condition. This equipment is engineered for precise cutting of mineral wool boards into lamellas with adjustable thicknesses from 40 mm to 200 mm, making it ideal for sandwich panel and insulation material producers. The system comprises: - Lamella saw with 35 Ø550 mm blades (15 new blades in original packaging) - Two 3-meter gravity conveyors - Additional main shaft (2 shafts in total) - Complete set of spacers and top boards for 40, 50, 60, 80, 100, 120, 150, and 200 mm - Complete dust extraction system with 15 kW Auto Shaker filter - Full ductwork and connection components Main technical data: - Maximum slab width: 1010 mm Nedpfx Aheyk Dmnsvewd - Maximum slab thickness: 200 mm - Main motor: 15 kW - Power supply: 415V, three-phase - Approx. 3,000 operating hours (2014–2019) This equipment has been well maintained and is in very good working condition. Immediate availability.

Condition: new, Year of construction: 2025, Turbo mill MTR-800 The turbo mill is designed for grinding, knocking out, granulating of materials in order to improve the quality of final separation in further recycling processes. Technical date: Nwjdov I S Ukspfx Ahvod - Installed power –75kW - Chamber width – approx. 910mm - Chamber diameter – approx. 620mm - Number of abrasive knives – approx. 89 pcs. - Number of abrasive counterknives – 18 pcs. - Structure placed on adjustable vibration isolators - Dimensions – 2200 x 1600 x 1550mm - Chamber opening by means of a manual hydraulic pump - Engine base with a rocker tensioner - Weight – approx. 1950kg- -Discharge ended with an orifice fi-150 -Electrical installation with inverter included in the price.

Year of construction: 2023, condition: new, machine/vehicle number: 001, The Stainless Steel Molasses Mixer is an advanced machine designed for homogeneous mixing of raw materials with liquids such as molasses and steam. With its two shafts and high-quality stainless steel construction, this machine offers durability and efficiency in one. The strength of this molasses mixer lies in its ability to deliver a continuous mixing process with an impressive capacity of 60 tons per hour. This makes it ideal for industrial applications where consistent and even mixing of materials is crucial to the production process. Nwodpfx Aherk Ipnsvod The machine's stainless steel construction ensures not only durability but also hygiene, making it suitable for applications in the food industry and other sectors where strict standards apply to materials in contact with products. Whether in the production of animal feed, chemical mixtures or other industrial processes, the stainless steel molasses mixer guarantees reliability and consistency in the mixing process, making it a valuable asset for modern production environments. Power:2 x 22 kW Speed:1500 rpm 2. volume: 600 liters 3. capacity:60 Tons/Hour 4. weight: 2500 kg

Year of construction: 1999, condition: used, power capacity 1,5 kW feed pressure 11 bar liter capacity 160 l weight of the machine ca. 0,15 t Nwodpfxsu Sbd Tj Ahvjd dimensions of the machine ca. 1,5x0,5x0,8 m 380 V, 50 Hz with plug and cable colour: light grey 2 cylinder, boiler 90 l compressor has been checked in our workshop, electr. testing report included!

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Nwsdpfjwb E Sbox Ahved