Used Honer Exact for sale (584)

Condition: as good as new (ex-display), Year of construction: 2011, Used storage tank made of steel according to EN 12285-1 (with test certificate) double-walled, for underground storage of fuel oil and diesel fuels, 1 dome (alternatively 2 domes possible). Capacity: 100,000 liters diameter: 2.900 mm length: approx. 15.750 mm Weight: approx. 18,800 kg Hodpji Enxdefx Adaeh In addition, we can also equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detector - Dome shaft with shaft cover in walkable or traversable drive-over design - Partition walls (as multi-chamber tank) - Interior coatings (e.g. 2-component epoxy resin), partial or full linings - Content and level measuring devices as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Dispensers for diesel, biodiesel and gasoline - with complete tank data acquisition on request - External tank insulation with PU foam Tank is cleaned inside and outside coating is overhauled and checked with 14 kV. A cost-effective delivery with our own truck is possible. Just tell us the delivery place, you will get the exact freight cost immediately. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Hedjvm Urvopfx Adash Contents: 16,000 liters Diameter: 2,000 mm Length: approx. 5,475 mm Weight: approx. 2,500 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 25,000 liters Diameter: 2,000 mm Length: approx. 8,400 mm Weight: approx. 3,500 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. Hjdpfx Aevm Uuwedash A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need any further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): Hsdpfovmz Idsx Adash 40,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 40,000 liters / 40 m³ Length: approx. 8,720 mm Diameter: approx. 2,500 mm Weight approx. 6,600 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick Hodpfxovm Uttj Adaoh - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 20,000 liters Diameter: 2,000 mm Length: approx. 6,860 mm Weight: approx. 3,500 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need any further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure Hodpfovm Uvnsx Adaoh - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 30,000 liters Diameter: 2,000 mm Length: approx. 9,9400 mm Weight: approx. 5,200 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including an operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need any further information, just call us or send us an email. Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate) double-walled, for above ground storage, with saddle feet, 1 dome, optical leakage warning device, limit value transmitter and complete tank fitting consisting of: - Filling pipe 3" with TW-lock - dipstick pipe 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hour) - 1 vent pipe 2" with vent cap. Tank is equipped with the above fittings at the factory and is cleaned on the inside. Capacity: 80.000 liters diameter: 2.900 mm length: approx. 12.780 mm Weight: approx. 15.750 kg The tank can be repainted in the RAL color of your choice and optionally equipped with a ladder incl. operating platform. A cost-effective delivery with our own truck is possible. Just let us know the place of delivery and you will immediately receive the exact freight costs. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us for this. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 100,000 liters. Tank and apparatus Barth Ltd. Werner-von-Siemens-Str. 36 Hodpjhvidgefx Adaoh 76694 Forst Tel: 07251 / 915119 Fax: 07251 / 915175

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate) double-walled, for above ground storage, with saddle feet, 1 dome, optical leakage warning device, limit value transmitter and complete tank fitting consisting of: - Filling pipe 3" with TW-lock - dipstick pipe 1" with dipstick - Suction combination suction pipe (1 1/2" or 2") Hsdpfeguzhcsx Adaeh - 1 vent pipe 2" with vent cap Tank is factory equipped with the above fittings and is cleaned inside. Capacity: 100.000 liters diameter: 2.900 mm length: approx. 15.750 mm Weight: approx. 18.800 kg The tank can be repainted in the RAL color of your choice and optionally equipped with a ladder incl. operating platform. A cost-effective delivery with our own truck is possible. Just let us know the place of delivery and you will immediately receive the exact freight costs. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us for this. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters. Tank and apparatus Barth Ltd. Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), 50 m³ / 50,000 l fire water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight approx. 8,000 kg Material: steel material S 235 JRG 2 Underground tank for underground storage, single or double-walled, suitable for walkable and driveable areas (load class SLW 30) with 1 dome (outer diameter 720 mm) with blind cover, seal and screws. New or used, immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The tank complies with the regulations of DIN 14230 (underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire department coupling / fixed coupling A according to DIN 14319 in design form B without dipstick Hjdpfx Adohh Sprjajh - Vent flange nozzle in NWN 100 with cap with a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground - Coated with a bitumen coating on the outside for protection - On request, we can provide the tank with a full internal coating on a bitumen basis or an epoxy resin internal coating (against corrosion) - It is also possible to line the tank with a plastic inner shell A cost-effective delivery with your own truck is possible. Simply let us know the delivery location and you will then receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers of all kinds is possible, just contact us. We always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: Hsdpfx Adovm Uwxeash - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 40,000 liters Diameter: 2,500 mm Length: approx. 8,700 mm Weight: approx. 7,200 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 60,000 liters Diameter: 2,500 mm Length: approx. 12,650 mm Weight: approx. 9,950 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including an operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need any further information, just call us or send us an email. Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time by arrangement! Hodpfx Adsvm Uxijaoh Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 20,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 20,000 liters / 20 m³ Length: approx. 6,840 mm Diameter: approx. 2,000 mm Weight approx. 3,500 kg Hedpfjvmz D Eox Adash Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick nozzle. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. Of course, we always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 30,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 30,000 liters / 30 m³ Length: approx. 9,940 mm Diameter: approx. 2,000 mm Weight approx. 5,000 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick nozzle. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. Hodpfx Adovmz Haeaeh A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 40,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: good (used), Technical Specifications for the Pallet Racking System: Racking System: Mecalux Technical Specifications for Installation: Number of rack rows: 01 unit Length per rack row: 17,625 mm Number of bays per rack row: 09 units Number of levels plus ground level: 02 units Volume Specifications: Pallet spaces per bay: 06 units Number of pallet spaces per row: 54 units Total number of pallet spaces: 54 units Included in scope of delivery: 10x pallet rack uprights, used Material finish: sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Including horizontal and diagonal bracing, base plates Uprights are pre-assembled (bolted lattice work) 2,000 mm high 1,100 mm deep 36x pallet rack beams, new Material color: RAL 2001 orange Beam type: TB-S 100 Box section profile: 100 x 50 mm Clear width: 1,825 mm Max. load per pair of beams: 2,000 kg with evenly distributed load Hjdpfxevzappj Adajh 72x integrated safety pins, new For securing the longitudinal beams against unintentional lifting 40x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 20x leveling plates, used Version: fully galvanized For leveling the rack uprights installed on uneven floors 01x load capacity sign with field and compartment load details, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping is required, this will incur additional costs. Please enquire with us for exact costs, which vary depending on delivery location and scope.

Condition: used, This listing is for 1 of 2 Hamilton Microlab 600 series dual syringe dispenser The units are in full working condition and is ready for immediate use General Description The Hamilton Microlab 600 Series Dual Syringe Dispenser is a semi-automated liquid handling system designed for laboratories requiring high-precision, high-accuracy fluid transfers. Built on Hamilton’s world-renowned syringe technology, it leverages positive-displacement mechanics to ensure consistent performance across a broad range of fluid viscosities and characteristics. Hodpfoxhfztex Adaoh Semi-Automated Liquid Handling With a simple touch of the hand probe button or an optional foot switch, users can actuate the dual precision syringe drives to aspirate or dispense exact fluid volumes. This ergonomic control reduces hand fatigue and enhances repeatability in routine workflows. Precision by Design Microlab 600 diluters and dispensers achieve precise and reproducible results through positive-displacement syringe drives that are independent of fluid viscosity, vapor pressure, or temperature. This makes the instrument highly suitable for complex or sensitive fluid-handling tasks such as: Serial dilutions Titrations Standard preparations Reagent distribution Sample aliquoting

Condition: used, This listing is for the Hirschmann Pipetus in it's original box (Opened) Hedpfjxhgd Ajx Adajh The unit is in full working condition and is ready for immediate use The Hirschmann Pipetus® is a modern, battery-powered pipette controller suitable for volumetric, graduated, and Pasteur pipettes ranging from 0.1 ml to 200 ml. It is designed for ergonomic use, precise liquid handling, and user-friendly operation. It represents the sum of all possibilities when it comes to pipetting – combining decades of experience, innovative technology, and superior-quality materials. Key Features One-button operation for both charging and dispensing of liquid. Fine dispensing valves with ceramic compound valve pins enable exact meniscus configuration. These valves are wear-free and provide maximum chemical resistance. Adjustable speed control: Precisely adjustable pumping and suction speeds for both filling and venting across five finely tuned performance stages. Battery: Rechargeable NiMH battery, up to 40 hours of continuous use. Charging: Inductive (contactless) charging via a microprocessor-controlled station — avoids memory effect. Display: Color display shows pipetting mode, speed settings, and battery status. Compatibility: Works with pipettes from 0.1 ml to 200 ml. Filter: Hydrophobic PTFE membrane filter, 0.2 µm, for contamination protection. Safety: Built-in safety valve prevents liquid ingress into the device. What's Included Pipetus® pipette controller Inductive charging and parking station Wall mount 0.2 µm PTFE membrane filter

Condition: used, This listing is for the Hirshmann Pipette Pipette Filler The unit is in full working condition and is ready for immediate use Enables exact meniscus configuration through fine dispensing valves with valve pins made of ceramic compound. Hirschmann Instruments™ Pipetus™ Pipet Filler charges and dispenses medium at the press of a button. An exact and continuously adjustable pumping and suctioning speed can be selected for both filling and venting within five precisely harmonised performance stages. Hodpfx Ajxv Dqcedash

Condition: used, This listing is for The Molecular Devices VERSAmax microplate reader Hodpfx Adjxwc Rdjaeh The unit is in full working condition and is ready for immediate release. The Molecular Devices VERSAmax microplate reade is a versatile instrument designed for precise absorbance measurements across a wavelength range of 340 to 850 nm. Utilizing a grating monochromator, it allows users to select exact wavelengths without the need for filters, offering flexibility for various assays. The reader supports dual-wavelength readings and accommodates different plate types, including round-bottom, flat-bottom, and half-area well plates. Temperature control up to 45°C enables kinetic assays under controlled condition

Condition: used, This listing is for a IKA RCT RET B C Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The IKA RCT RET B C Heating Magnetic Stirrer is a reliable laboratory device designed for precise heating and stirring tasks. Combining a robust heating plate and magnetic stirrer, it ensures accurate temperature control and efficient sample processing. Key Features: Durable Heating Plate: Made of aluminium alloy, the plate ensures optimal and uniform heat transfer for consistent sample heating. Temperature Control: Offers a maximum temperature of 310°C with a temperature control mode for faster and precise medium heating. Versatile Magnetic Stirrer: Features a speed range of 50-1500 rpm, capable of handling up to 20 L stirring volume. Suitable for a wide range of laboratory applications. Safety Features: Includes a fixed safety circuit that shuts off the unit at 370°C and a hot surface warning to prevent accidental burns. Digital Display: Allows exact temperature and speed settings, even when the device is switched off, ensuring ease of use and precision. Advanced Connectivity: Equipped with USB and RS232 interfaces for remote control and documentation of test parameters via a PC. Compatible with labworldsoft laboratory software for enhanced functionality. Technical Specifications: Motor Rating Output: 9 W Heat Output: 600 W Hedpfx Ajxxz T Tsdajh Temperature Range: Room temperature + device self-heating to 310°C Speed Range: 50-1500 rpm Stirring Bar Length: 20-80 mm Set-up Plate Material: Aluminium alloy Set-up Plate Dimensions: Ø 135 mm Dimensions: 160 x 85 x 270 mm Weight: 2.5 kg

Condition: used, This listing is for a Varian Autosampler Model 410 unit on it's own. The Varian ProStar 410 HPLC Autosampler has variable injection volumes and automixing/autodiluting. The ProStar 410 is perfect for laboratories with changing needs. It provides flexible operation without sacrificing reliability or performance. Multiple injection modes for flexibility, ease of use, and precision. Full loop filloverfills the sample loop for maximum precision. Partial loop fill allows easily programmed variable injection volumes. Microliter pickup withdraws the exact amount to be injected without sample loss. The Varian ProStar 410 AutoSampler offers the best of both worlds. It is intelligent for research applications yet rugged enough for routine quality control work. With Pressure Assisted Sampling Aspiration (PASA), the Varian 410 ProStar AutoSampler applies pressure within the vial while the sample is withdrawn by a high-resolution syringe. Air bubbles and in-vial vacuum problems are eliminated resulting in excellent reproducibility. Flexibility with multiple injection modes Optimal performance with integrated column oven Biocompatible and sample cooling options available Specifications: Standard sample tray 84 x 1.5 mL vials with 3 x 10 mL vials Optional sample trays 96 x 2.5 mL vials or 24 x 10 mL vials Dispenser unit 50 µL syringe standard; 1000 µL or 2500 µL syringes, optional Injection volume 1 to 5000 µL with preparative option up to 10 mL Injection methods nine methods in memory Needle wash integrated, programmable large reservoir Vial detection Yes Reproducibility Full Loop: < 0.3% RSD Partial Loop: < 0.5% RSD Microliter Pickup: < 1.0% RSD Carryover < 0.05% Optional sample cooling 4°C to 15°C programmable Can be refurbished on request, refurbishment not included in price. Hsdexzh Amopfx Adaeh

Condition: used, This listing is for a Thermo Scientific Orion AQUAfast Colorimeter. The unit is in full working condition and is ready for immediate release. The Thermo Scientific Orion AQUAfast Colorimeter is a robust and versatile multi-parameter instrument designed for efficient water and wastewater analysis. With over 90 pre-programmed methods, including tests for key nutrients such as total nitrogen and total phosphate, this colorimeter offers precise and reliable results for a wide range of testing needs. Ideal for both laboratory and field use, the AQUAfast colorimeter features automatic wavelength selection, a waterproof design, and user-friendly features to simplify and enhance the testing process. Hjdpfx Adjxx Acpjaoh Key Features: Rugged Waterproof Design: With an IP67 rating, this colorimeter is built for durable performance in challenging environments, making it perfect for both field and laboratory applications. Extensive Preprogrammed Methods: Includes over 90 preprogrammed methods for common water and wastewater parameters, such as total nitrogen and total phosphate, ensuring easy and accurate testing for a variety of needs. Automatic Wavelength Selection: The colorimeter automatically selects from 6 LED wavelengths (430, 530, 560, 580, 610, and 660 nm) to match the optimal wavelength for each test parameter, improving efficiency and accuracy. Countdown Timer: The built-in countdown timer ensures precise and consistent timing for all tests, helping users achieve repeatable results with ease. Data Storage: Capable of storing up to 1000 test results with a date and time stamp for easy data management and review. Long Battery Life: Enjoy extended operation with up to 26 hours of continuous use or 3500 tests, making it ideal for long fieldwork sessions. Multilingual User Interface: The interface supports multiple languages, including English, French, German, Italian, Polish, Portuguese, and Spanish, making it accessible for a wide range of users. Compatible with Thermo Scientific Orion Reagents: Use with Thermo Scientific Orion reagents ensures high accuracy and consistency in test results. Specifications: Wavelengths: 6 LED wavelengths (430, 530, 560, 580, 610, and 660 nm) Preprogrammed Methods: Over 90 methods for common water/wastewater analysis Data Storage: 1000 readings with date/time stamp Battery Life: Up to 26 hours continuous use or 3500 tests User Interface: Multilingual (English, French, German, Italian, Polish, Portuguese, Spanish) Waterproof Rating: IP67 Countdown Timer: Yes, for precise test control Dimensions: Portable and lightweight for field use (exact dimensions available on request)

Condition: used, This listing is for a Sartorius YCW653 5KG / F1 Weight. The unit is in full working condition and is ready for immediate release. The Sartorius YCW653 5KG / F1 Calibration Weight is a high-precision weight designed for the accurate calibration of balances and scales. Manufactured to meet stringent F1 accuracy class standards, this weight is ideal for laboratories, industrial settings, and quality control environments where exact measurements are critical. Sartorius calibration weights are crafted from premium stainless steel, ensuring long-term durability and resistance to corrosion. This 5KG weight provides consistent and reliable calibration, maintaining the accuracy of your measuring instruments. Key Features: F1 Accuracy Class: This calibration weight complies with OIML F1 standards, ensuring a high level of precision suitable for high-accuracy balance calibration. Premium Stainless Steel Construction: The weight is made from high-quality stainless steel, providing exceptional durability and corrosion resistance for long-lasting performance. Polished Finish: The smooth, polished surface minimizes contamination risk and makes cleaning easy, ensuring the weight remains free from dirt or residue that could affect accuracy. Precision Manufacturing: Sartorius weights are precision-machined to offer superior consistency, making them ideal for calibrating sensitive laboratory equipment. Protective Case Included: The YCW653 comes with a secure protective case for safe storage and transportation, preventing damage during handling. Specifications: Hjdpexx Accofx Adajh Weight Class: F1 (OIML) Nominal Weight: 5 kg Material: Stainless steel Surface Finish: Polished Calibration Tolerance: In line with F1 class standards Storage Case: Included for secure protection Applications: Suitable for use in laboratory, industrial, and quality assurance settings.

Condition: used, This listing is for a Grant QBA1 Heat Block . The unit is in full working condition and is ready for immediate release. The Grant QBA1 Heat Block is a specialized component of the Grant Instruments QB Series Dry Block Heating Systems, designed for optimal temperature management and versatility in laboratory applications. This heat block is particularly beneficial for users needing reliable and precise heating for various biochemical and molecular biology experiments. Key Features: Hjdpsxxz Rrefx Adash Interchangeable Blocks: The QBA1 Heat Block is designed to fit seamlessly into the Grant QB Series Dry Block Heating Systems. This interchangeability allows for quick transitions between different blocks depending on the specific requirements of each application, enhancing workflow efficiency. Precision Temperature Control: One of the standout characteristics of the Grant QB Series is its ability to deliver excellent temperature control and uniformity across the heating surface. This precision is critical for experiments that require exact temperature settings, such as enzyme reactions and temperature-sensitive processes. Wide Range of Applications: Enzyme Digestions: The QBA1 Heat Block is ideal for applications requiring consistent and controlled heating for enzyme activity, facilitating reactions at optimal temperatures. Enzyme Activity Studies: It provides a stable platform for studying enzyme kinetics and other parameters, ensuring accurate and reproducible results. Nucleic Acid Hybridizations: The heat block is suitable for heating samples needed in nucleic acid studies, making it useful for hybridization assays and PCR preparations. High-Quality Design: The Grant QB Series Dry Block Heating Systems, including the QBA1 Heat Block, are constructed from robust materials that ensure durability and reliability. This quality design withstands the rigors of laboratory use, making it suitable for demanding environments where consistency is crucial.

Condition: used, This listing is for a IKA RCT B S002 Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The IKA RCT Basic Magnetic Stirrer is a highly versatile and reliable laboratory device, combining precision stirring with integrated heating capabilities. Designed for various lab applications, it ensures consistent performance, safety, and ease of use. Key Features: Wide Speed and Temperature Range: Powered by a strong motor, it supports a high range of stirring speeds and operates with adjustable heating plate temperatures between 50°C and 310°C. Integrated Temperature Control: Includes a PT 1000 temperature sensor for precise and real-time temperature monitoring, enabling efficient heating of the medium. Digital Display for Accuracy: Allows exact setting of temperature and speed, even when the unit is turned off, with a safety temperature limit displayed digitally. Hot Surface Warning: The Hot Top indicator alerts users when the heating plate remains hot, reducing the risk of burns. Automatic Safety Features: Switches off automatically if the connected external temperature sensor is not properly immersed, with timeout duration adjustable. Hsdpfxjxxz Uks Adaeh Bushing for Contact Thermometer: Compatible with contact thermometers like ETS-D5, ensuring precise external temperature control for sensitive applications. Aluminum Heating Plate: Optimized for superior heat transfer and fast heating of samples. Enhanced Durability and Design: The enclosed assembly (IP 42) protects the unit against splashes and contaminants, extending its service life. Improved Magnetic Adhesion: Ensures stable stirring, even at higher speeds. Error Code Display: Provides digital error codes for straightforward troubleshooting.

Condition: used, This listing is for a Schott Halogen HT2 Stirrer Hotplate The unit is in full working condition and is ready for immediate release. Key Features & Specifications While exact values for the “HT2” designation are not widely published, the listed SLR Halogen model gives a very good indication of typical performance: Heating surface: glass/ceramic top plate (≈16 cm diameter in one listing). Maximum plate surface temperature: up to ~500 °C. Stirring range: approximately 10 – 1,100 rpm (in one listing). Compact dimensions: one listing shows ~24 × 37 × 9 cm (W×D×H). k Suitable for use with a retort rod. Hjdpsxv Aa Nofx Adaoh