Used Himoinsa Hiw 100 for sale (23,702)

Condition: used, Year of construction: 2025, Dimensions (L/W/H) 6400x1500x1780 mm Total power requirement 19 kW Weight 1800 kg Kledpfx Ahewt Ua Eo Njl Arbeits- und Platzersparnis, sicherer binierbar mit einer Hochgeschwindigkeits-Vierseitenfräse zu einer effizienten, automatischen Produktionslinie.

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Ksdpfxefbt Huo Ah Nell Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment Kodpohik Ezsfx Ah Nell - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition

Year of construction: 2018, condition: good (used), Mould turner 10Ton Kodow Dtp Hepfx Ah Nell Year : 2018

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, number of axes: 5, This 5-axis DMG DMC 100 H was manufactured in 2006. It features a Siemens 840D powerline control with Shopmill, and robust traverse paths of 1000 mm in X, Y, and Z axes. Equipped with a high-speed range up to 8000 rpm, dual gear stages, and an HSK 100 tool holder with up to 360 positions. Includes two 800x800 mm pallets and a B-axis at 0.001° precision. Contact us for more information about this machine. Additional equipment • Electronic handwheel • Operating mode 4 • Oil mist extraction • Internal cooling (IKZ): 40 bar • Paper band filter • Measuring probe Renishaw OMP 60 • Chip flushing gun Machine Benefits Technical Machine Benefits • Tool holder: hsk 100 Ksdoyaau Tepfx Ah Noll • Tool positions: 270 / 360 • Number of pallets: 2 • Pallet size: 800 x 800 mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D powerline + Shopmill, number of axes: 5, This 5-axis DMG DMC 100 H was manufactured in 2005. It features a Siemens 840D powerline control with Shopmill, a 1,000 mm travel in X, Y, and Z axes, and a speed range up to 8,000 rpm. The machine includes a HSK 100 tool holder, 270/360 tool positions, and two 800 x 800 mm pallets. Consider the opportunity to buy this DMG DMC 100 H horizontal machining centre. Contact us for more information. Additional equipment • Electronic handwheel • Operating mode 4 • Oil mist extraction • Internal cooling (IKZ): 40 bar • Paper band filter • Chip flushing gun Machine Benefits Technical Machine Benefits • Number of pallets: 2 • Pallet size: 800 x 800 mm • Tool positions: 270 / 360 • Measuring probe: renishaw omp 60 Extra Information Kljdpfx Aoyaaugsh Njl Machine still under power

Condition: used, mileage: 316,423 km, power: 120 kW (163.15 HP), first registration: 05/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, number of seats: 2, Year of construction: 2010, Equipment: ABS, central locking, electronic stability program (ESP), had accident, soot filter, + RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #543 Mercedes Benz Sprinter 516 CDI 5.0t with Rockstroh Drain Jet 100-2 High-Pressure Flushing Unit Installation: Rockstroh Drain Jet 100-2 * PTO from Sprinter * Pratissoli KF3 high-pressure pump * Pressure control automatic * Pressure control and safety valve * 1st hydraulic HP hose reel for approx. 120m DN13 * 2nd hydraulic HP hose reel for approx. 80m DN19 * Filling hose reel with approx. 40m DN20 * approx. 1,000-litre water tank * Bypass control * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED rotating beacons * Various storage options * Vice * Wooden floor with coating, side panels clad in aluminium chequer plate Klsdpfx Ahexc S Ate Nsl Special equipment: 13-pin trailer socket, 100 Ah battery, additional (reinforced) battery, digital tachograph, 180 A alternator, transmission lock for PTO, rear door (opening angle 270 degrees), PTO 2B with output shaft, parameterisable special module, radio pre-installation, spare wheel with road tyres, spare wheel holder under rear frame including jack, cab seats: comfort suspension seat, driver side, reinforced rear stabiliser, reinforced front stabiliser, sender for auxiliary heating, separation relay for additional battery, preparation for additional heat exchanger, provision for transmission oil cooling, booster heater Additional features: 3rd brake light, adaptive brake light, driver airbag, washer fluid level indicator, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated indicator, brake assist, braking system with ABS+ASR, roof lining in cab, lockable glove compartment, body/superstructure: standard high roof panel van, child safety lock, fuel tank: main tank 75 Ltrs., continuous bulkhead, load securing/lashing points, headlamp range adjustment, engine 2.1 l - 120 kW CDI CAT, wheelbase 3,665 mm, smoker package, low emissions according to Euro 5 emissions standard, sliding right-side cargo/passenger door, seat cover/upholstery: Lima fabric, cab seats: adjustable passenger seat, Assyst maintenance interval display, heat-insulating glazing, permissible GVW 5.00 t, twin tyres on 2nd/rear axle For further detailed information and/or pictures, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to alterations, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our Terms and Conditions and with exclusion of any warranty.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Double spindle CNC lathe with 2 spindles, 3 turrets and 3 Y axes each turret with 15 stations, BMT 44 driven tool holder 2x C-axis 3x Y axis Ksdpfovxu Eaex Ah Noll Fanuc 32i -TB control Bar passage 65 mm Left spindle 15/11 KW, Hainbuch Spanntop mini Axle pull size 65 Right spindle 11/7.5 KW, Kitagawa three-jaw chuck Finished part gripper Conveyor belt Bar loader interface Coolant system, separate tank 200 l Cooling unit High pressure on turrets 1-3 via M function 15 bar/40 l/min 2x Brinkmann pump Renishaw tool measurement for all turrets Tool monitoring for spindle and AGW Spindle flushing through the counter spindle IKZ, Deublin Rotary distributor Hinged belt conveyor Transformer available immediately

Condition: reconditioned (used), > Cut-off saw TS 100 c, with conveyor belt, suction belt, extraction, adjustable treadmill and saw blade. > 4 hold-down devices, new wheels and new bearings. > Machine completely overhauled and new painted. Kledpfsfua Drex Ah Njl > Passage width of 600mm > Further details on request.

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates Klodpfx Aewf Dvaoh Nol - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Optional retrofit for roll processing: - Cross cutter and feeding rollers in feed area - RO 800 roll stand

Condition: reconditioned (used), > Upper heating with small individual radiators via toggle switch > Lower heating with large radiators > Upper stamping system > Protective grille > 4 cooling fans D05 > Automatic pre-blowing and demoulding Ksdpfx Aefug Anoh Nell

Condition: excellent (used), Year of construction: 2018, plate thickness 2.0 mm throat max. 400 mm Roller center distance min/max 100/120 mm piston stroke max. 20.0 mm turning speeds 3.0 - 15.0 U/min voltage 400 V total power requirement 2.95 kW weight of the machine ca. 385 kg range L-W-H 1200 x 800 x 1200 mm very good condition (almost like new) !!! Equipment: - heavy / robust electro-motorized beading machine - electro-motor drive - infinitely variable speed adjustment - internal gear brake motor - electro-hydraulic infeed of the top roller Kedpox U El Uefx Ah Nell - 1x adjustable stop plate - 1x freely movable double foot switch - 2x set of beading/conveyor rollers - original operating instructions

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication Kledpfx Ahex U Eias Nsl - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: good (used), Year of construction: 2007, functionality: fully functional, clamping force: 800 kN, For sale is an injection molding machine from the manufacturer Arburg, model 370 C 800-100. Unfortunately, the injection unit is no longer available. Overall, the machine is in good condition. Technical Data: Year of manufacture: 2007 Clamping force: 800 kN Tie bar spacing: 370 x 370 mm Max. daylight: 750 mm Mold installation height: 250 mm Kljdpfsx U Dnuox Ah Nol Injection unit: 100 (not included) Transport and loading can be organized Europe-wide upon request for an additional charge. Prices include VAT. Inspection by appointment possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production line? Or would you like to sell your own? For more information or contact options, please visit our website.

Condition: good (used), Mobile extraction system Suction pipe 100 mm Ø Filter cleaned H2 dust-tested 720 m³/h 1.1 kW Kedjx U Dbhopfx Ah Noll

Condition: used, mileage: 10 km, power: 75 kW (101.97 HP), first registration: 06/2025, fuel type: diesel, empty load weight: 1,471 kg, next inspection (TÜV): 06/2028, fuel: diesel, energy efficiency: A, color: white, gearing type: mechanical, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, soot filter, Passenger airbag, side airbag, heated exterior mirrors, radio/tuner, electric windows, adjustable steering column, multifunction steering wheel, rear parking aid (PDC) sensors, body-coloured bumpers, partition wall without window, load compartment with wooden flooring, electric exterior mirrors, hands-free system, Bluetooth hands-free system, height-adjustable driver’s seat, USB port, hill start assist, start-stop system, traction control (ASR), third brake light, outside temperature display, rear view camera, daytime running lights, rear head airbags, front head airbags, remote central locking, DAB+ digital radio, emergency brake assist, driver drowsiness detection, voice control, traffic sign recognition, steel wheels, high beam assistant, summer tyres, right sliding door, speed limiter, Android Auto, Apple CarPlay, spare wheel, stock vehicle----Errors and prior sale excepted. Stock number 347 Kedpfxewr Emyj Ah Nsll

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 30 mm, overall weight: 9,280 kg, ENGEL e-insert 310V/100 rotary, equipped with RD 1.600 rotary table and ENGEL easix articulated robot, as well as CC300 microcomputer for centralized control of the machine and robot. Standard mold installation specifications: minimum mold height 250 mm, opening stroke 350 mm, maximum platen distance 600 mm. Hydraulic drive option ECODRIVE - SHV2. Materials to be processed: POM 30–40% GF, Hostaform C9021. Kedpfx Ahjyb Smks Njll ENGEL e-insert: The vertical machine for specialized tasks requiring increased precision. This machine concept offers optimal conditions for overmolding or assembling pre-fabricated components (metal, glass, electronic modules, plastics), ensuring part retention in the mold and reducing cycle times. Included in the package: highest injection process precision due to the servo-electric injection unit, as well as outstanding energy efficiency from ENGEL ecodrive.

Condition: new, Year of construction: 2026, Interbake V-MIX 100 planetary mixer 100 liter with 2 bowls. The very solid construction of the device allows you to work with cakes and masses in the baking and confectionery industry. Thanks to the mechanical system of lifting and lowering the bowl, it is possible to work continuously without removing the tool. The innovative solution of the gearbox allowed for multiplication of the torque, which translates into higher efficiency with lower energy consumption. A very precise arrangement between the tool and the cauldron allows you to knead small amounts of masses, creams, cakes. Kledpfeu S Eqbjx Ah Nol Available in 60,80,100 and 120 liter digital control panel stepless regulation - frequency inverter control programming 20 mix recipes programming the time of mixing automatic lifting of the bowl 3 tools included: dough hook wire whip flat beater

Condition: new, Year of construction: 2024, machine/vehicle number: 30065973-10, Unused 100-liter Ekato Twin Motion Vacuum Mixer, model UniMix, type SRC 100, with 316L stainless steel product contact surfaces. It has a 100-liter maximum working capacity and a 5-liter minimum working capacity, rated for -1/+2 bar (29 psi and full vacuum) at 133°C, and jacketed for -1/+4 bar (58 psi and full vacuum) at 151°C. Features include a top-mounted Ekato Paravisc axial Z-type mixer with bottom and sidewall scrapers, driven by a 3 kW motor. It also has a bottom-mounted Ekato S-Jet 500 high-performance rotor/stator homogenizer powered by a kW motor, 480 volts, and a control panel with PLC and VFD controllers, as well as an operator HMI. The vessel is ASME-rated, with Ekato project# 30065973-10, built in 2024. The system is unused, still on its original shipping skids from Ekato, with FAT performed. Kedpsyba Szsfx Ah Njll

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 0119-2207-0001-7, load capacity: 100 kg, total height: 1,500 mm, total length: 1,200 mm, total width: 600 mm, type of input current: AC, rotary table diameter: 300 mm, overall weight: 300 kg, height adjustment type: mechanical, table load: 100 kg, pivoting range: 90 °, disc diameter: 300 mm, product height (max.): 1,500 mm, welding current (max.): 400 A, Equipment: documentation/manual, see images in the attachment Kodpfeya Urgjx Ah Nsll

Year of construction: 2019, operating hours: 6,483 h, condition: like new (used), functionality: fully functional, Refurbished Comandulli OMEGA 100, year 2019, 6483 working hours. All bearings changed, new belt. Machine like new. Tested. Guarantee 1 year. Klodpfx Ahexudl De Njl

Condition: new, pressure: 100Oil tank capacity: 120Bending capacity: (Flaches Material) 320 x 24Bending capacity: (Runde Rohre) 114 x 10pressure: 285working speed: 10Return speed: 10motor: 10table area: 750 x 1425working height: 930length: 1430width: 750heigth: 1450weight approx.: 1700stroke: 285 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  Kodsr I H Axepfx Ah Noll - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: used, Year of construction: 2022, operating hours: 45 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel Kodpfxsv R Suie Ah Nell Mast: articulated arm Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2019, operating hours: 285 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel Kodpjv R Supefx Ah Noll Mast: articulated arm Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: new, neu Kjdpfx Ahjx Urqwj Nell ca. 2 - 4 Wochen ab Auftr Türkei 5010 € 96.69 € 100 kg 150 mm 150 mm 360 ° 120 kgm 230 / 50 V / Hz 0.25 kW 0.25 kW 0.1 - 3 U/min 30 s 350 mm M12x6 mm 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement