Used High Speed Press for sale (53,551)

Condition: used, Year of construction: 1987, machine/vehicle number: 87 / 906, pressure:63 t stroke:8 - 80 mm no. of strokes:60 - 300 Hub/min distance between columns:720 mm table surface area:710 x 700 mm hole in the table:345 x 100 mm column travel -side:320 x 200 mm ram surface:500 x 400 mm Bwjdpocxxpcefx Abbsh ram adjustment:80 mm throat:350 mm dayligth:250 / 275 mm feed length:220 mm table above floor:1000 mm total power requirement:9,2 kW weight of the machine ca.:6,5 t

Condition: excellent (used), Year of construction: 1983, Force: 45 tons Daylight: 205/305mm Bsdpfxegfvnns Abbewh Table: 700x450mm Ram: 700x360mm Ram adjustment: 50mm Stroke: 10 - 50mm Strokes per minute: 80-400 Requested power: 11 kW Weight: 7.200 kos. Height: 3.100mm

Year of construction: 1983, condition: used, Force: 75 tons Table: 630x620mm Ram: 500x450mm Ram adjustment: 80mm Daylight: 370mm Windows: 300mm Stroke: 08-100mm Strokes/Minute: 07-160 Requested power: 11KW Weight: 7 tons Height: 3050mm SIRI electronic servo roll feeder Bodsctl Dtepfx Abbjwh Hydraulic overload protection Hydraulic Ortlinghaus clutch

Condition: used, Year of construction: 1976, Force: 160 tons Bedjcna Hfspfx Abbewh Windows: 600mm Daylight: 420mm Ram adjustment: 80mm Table size: 1100x1100mm Ram size: 1030x800mm Hole in table: 680x250mm Stroke adjustable: 30-100mm Strokes per Minute: 40-1800 Power requested: 18,5KW, weight: 20 tons, height 3950mm Siemens control, ALBA roll feeder material 400x3mm

Condition: used, Year of construction: 1987, functionality: unexamined, pressing force: 20 t, stroke length: 38 mm, overall weight: 3,600 kg, BSTA 20 H press, with BBV 190/85 roll feed on left-hand side, Bwedpfew S E Tljx Abbjh Year of mfg. 1987 Adj. stroke 8 to 38 mm Nominal capacity 20 tons Max. tool loading width 420 mm For spare parts or overhaul/repairs. Sold in "as is" condition. Available immediately ex-stock. Please contact us for more information!

Condition: like new (used), Year of construction: 2024, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: QYKM-1400x2900, total height: 3,200 mm, total width: 4,300 mm, total length: 7,600 mm, overall weight: 2,500 kg, Equipment: documentation/manual, We are selling our as-new pizza box machine due to business closure. The machine was ordered from China. It is nearly new and operates flawlessly. All components are fully functional. Coating can be applied at any time. Bodpexvy Hmsfx Abbswh

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Bjdpfxewz Ukyo Abbswh Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Type: Two chucks Bwodpfxswz Ufws Abboh

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840D solution line, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 630 mm Travel Z-axis: 550 mm Rapid traverse speed: 60 m/min Spindle speed: 12,000 rpm Clamping area: 3,600 x 710 mm T-slots: 5 Number of axes: 3 Tool magazine: 40 positions Traverse path in pendulum mode per work area: 1,250 mm Bwsdpfjyfgf Njx Abbeh MACHINE DETAILS Control: Siemens 840D solution line Machine weight: 9,600 kg EQUIPMENT 24-position tool magazine Coolant system 900 l High-pressure system 30 bar Internal coolant supply tools Chip conveyor Hydraulic unit 200 bar 6 hydraulic connections for 200 bar 2 connector couplings A+B (3 per table side) Variable Chiron clamping logic Prosin Plus tool breakage monitoring for diameters > 3 mm Automatically opening and closing loading door Machine preparation for 1 x NC axis

Condition: used, Year of construction: 2004, operating hours: 77,374 h, machine/vehicle number: IntNr231477, Vertical CNC Machining Center CHIRON MILL 6000 high speed with NC swivel head Year of manufacture: 2004 – major overhaul by manufacturer CHIRON in 2013 The machine underwent a complete factory overhaul by CHIRON in 2013. Operating hours: approx. 80,374 h Spindle replacement: March 2021 – spindle hours: approx. 8,000 h Maintenance performed: January 2024 Technical Specifications: Bwodpfoyg Nqwsx Abbjh Control: Siemens 840D (PCU50, NCU572.4) NC swivel head High-speed package: Motor spindle 12,000 rpm, 140 Nm Axis travels: X 6,000 mm / Y 630 mm / Z 550 mm Rapid traverse in X / Y / Z: 60 m/min Chip-to-chip time: 3.0 sec (3.3 sec DIN) vertical / 4.7 sec (5.0 sec DIN) horizontal Production package: - Scraper belt conveyor, discharge height 1,050 mm - Preparation for internal coolant supply (IKZ) - Vacuum rotary filter KNOLL VRF250 (suitable for steel, cast iron, aluminum, plastic, brass) - High pressure 70 bar with HP pump and variable valve - Automatic loading doors - Central partition for pendulum machining - 92 tool positions HSK-A63 (rear magazine) - 5-axis milling package - Air blast - Tool life monitoring - Additional V24 RS232 interface in electrical cabinet - BDE/MDE interface (states: machine on, machine running, piece counter) - Marposs (Brankamp) collision monitoring CMS100 - 3D machine model for kinematic simulation in CAM programming system - Hydraulic unit 210 bar, 2 clamping circuits, separate system clamping pressure per pendulum field, clamping pressure monitoring Linear clamping system KOHN 8 hydraulic clamping vises KOHN Multi 2000 MFS 125/680 HD Two-part operator platform (tread grid) across the full 6,000 mm operating width Dimensions and Weight: Machine height: approx. 3,000 mm Total weight: approx. 20,000 kg The machine can be inspected under power by appointment. Technical data and details are subject to change or error, subject to prior sale.

Condition: used, Comprehensively tested, used WINKWORTH model RT80 stainless steel jacketed high speed mixer. Manufacturer: Winkworth Model: RT80 Material: Stainless Steel Capacity: 120 litre, working capacity 80 litre Bwedpfx Abjygvfzobsh Agitation: Shaft equipped with 4 mixing blades driven by 7.5 kw, Hp 10, Rpm 30/150, 380 volt motor. Stainless steel chopper driven by 5.7/4.7 kW, 50Hz, 2900/1450 rpm, 380-415 V Also includes: Stainless steel jacket rated 3.5 bar at 200 DegC, 2000 watt hot water heating skid. Local controls. Specifications: Bowl Volume: 31.7 gal Motor Power: 7.5 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 4.7 - 5.7 kW RPM Of Choppers: 1450 - 2900 HP Of Unit: 7.5kW Revolutions Per Minute: 30 - 150 Vacuum Internal (Y/N): N Jacket (Y/N): Y Jacket Pressure: 3.5 Bar Jacket Temperature: 200 Deg.C.

Condition: used, Comprehensively tested and refurbished, Used Winkworth model RT200 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless Steel Capacity: Approximately 200 Litre Capacity Mixing chamber: Approximately 1,000mm x 650mm Diameter Discharge Type: Centre Bottom with Discharge Valve Type Of Mixer: T-Arm Blades Motor: 11kW SEW Geared Motor Also includes: Stainless Steel Side Entry Chopper Driven by 4kW Motor. Tote lifter (Max 150 kg) and 2 off stainless steel totes. Click on the link below to see a video of the machine running. Specifications: Bowl Volume: 52.8 gal Motor Power: 14.8 hp Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Bjdpfx Aboygvd Djbowh Horsepower Of Choppers: 5.362 HP Of Unit: 14.751 Weight: 150 Dimensions: 1000mm x 650mm Diameter

Condition: used, Comprehensively tested and refurbished, used Winkworth model RT400 316 stainless steel high speed ploughshare mixer. Material: Stainless steel Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter Discharge Type: Centre bottom pneumatically operated flap discharge value Type Of Blades: Ploughshare blades Motor: 11kw, 380-415 volt, 3/50, 1450-1460rpm motor through Custom Power Transmission gearbox type MO820 Revolutions Per Minute: 99rpm Also includes: (1) stainless steel side entry chopper driven by 4kw, 380-415volt, 2840-2870rpm, 3/50 motor. A video of this mixer is available below. Bsdpfx Ajygvdwsbbswh Specifications: Bowl Volume: 105 gal Motor Power: 11 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 4kW RPM Of Choppers: 2840 - 2870 HP Of Unit: 11kW Revolutions Per Minute: 1450 - 1460 Vacuum Internal (Y/N): N Jacket (Y/N): N Jacket Pressure: N/A Jacket Temperature: N/A Weight: N/A Dimensions: 1,300mm long x 800mm diameter

Condition: used, Year of construction: 2011, machine/vehicle number: 4, Elektrische Hochleistungs-Schneidemaschine / High Speed Wire Cutting Machine RENZ HSC-EBaujahr / Year 12/2011 - Serial-No. 460007150.50107 Schneideleistung bis / Cutting capacity max. 3000 Stück/h Schneidelänge 3 - 99 Schlaufen, variabel einstellbar Cutting length 3 – 99 loops, variable adjustable Stückzahlzähler ja / Piece counter yes Verarbeitbare Durchmesser / Possible wire diameters 3/16" - 1 1/4" ( 5,5 - 32 mm ) Bedpfxeiit Ifs Abbowh Teilung / Pitch 2:1, 3:1, 4:1 Umrüstzeit von Durchmesser zu Durchmesser / Time required for diameter change 2 - 10 Min. Spannung Power supply / 230 V / 50 Hz Maße / Machine L110 x W82 x H100 cm Gewicht / Weight gross 74kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2007, machine/vehicle number: 1369, Einbrenn-System Kodak TSO-850 High-Speed Thermo-System / Baking-System Kodak-TSO-850 High-Speed Thermo-SystemYear 2007 - Serial-No. 1369 Bwsdpjh Aya Isfx Abbeh Arbeitsbreite / Working width max. 850mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 40A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2022, High frequency panel Press Orma Model LS ECO 25/13 Year of production: 2022 Technical condition: very good Manufacturer: Orma Macchine – Italy Work Table and Feed System: • Work dimensions: 2500x1300 mm, 3.25 m² • Mechanical pusher: length 2500 mm, used for advancing pieces into the press; fixed pushing speed; pushing bars operated by a chain system • Limit switch for stopping the press at the end of the work table • 1 foot pedal for moving pieces on the work table • 1 emergency stop button _____ Hydraulic Press Model LS/ECO: • High-frequency platens, dimensions: 2500x1300 mm • Mobile lower platen • Vertical pressing system: Bodpfx Absv Ayftebswh o 4 vertical pressing pistons with a diameter of 70 mm, maximum total force of 40 tons, stroke/opening: 150 mm • Horizontal pressing unit: o Consists of 5 double-acting pistons with a diameter of 40/25 mm that operate 5 steel pressing plates; stroke/opening: 150 mm o Maximum total force: 7.5 tons o Pistons can be activated via a special device to reduce the pressing area • Rear vertical pressing unit: o Used to fix the last pieces and contrast the lateral horizontal pressing unit, consisting of a steel bar (2500x150 mm) o Actuated by 3 vertical pistons with a 70 mm diameter, total maximum force: 30 tons, stroke: 150 mm • Side pressing unit and rear clamping device: o Allows the production of pieces with unlimited length • Two working cycles: o Manual or automatic, selected by pressing a button o Special cycle for adjusting after pressing • Independent pressing units: o Each of the three hydraulic units has an independent pressure setting • Single hydraulic circuit: o Uses the same oil reservoir o Total power: 5 HP • Main control panel equipped with all command options (PLC included) for press operation • Press structure made of welded steel bars and profiles _____ Evacuation System: • Working dimensions: 2500x1300 mm • Mounted at the rear of the press on the mobile pressing unit • Gravity unloading system with triangular profile elements _____ INCLUDED: a. High-Frequency Generator • 20 kW high-frequency generator • Adjustable to five frequency positions, allowing the generator to be used based on the type of operation • Silicon diode bridge for constant efficiency • Fully equipped with all components for connection to the press • Press platens made of insulating materials, covered with aluminum plates to allow high-frequency transmission o Aluminum coating functions as positive and negative poles (upper and lower platen) b. Stainless steel platen coating c. Height adjustment for side steel pressing plates d. Additional thickness for the side pressing plates We offer professional dismantling, loading, installation, commissioning, and training on machine operation. We also provide ongoing maintenance services and access to spare parts.

Condition: new, NEW machine, end-of-series Pit Stop D2H HIGH SPEED double-head creasing and perforating machine, equipped with 2 standard creasing kits (for Head A and Head B) and mobile wheels. Bwjdpfx Ajxmhfljbbsh The second head, unlike the first, operates from bottom to top. All creasing and perforating tools can be installed on this second head. This allows creasing and perforating to be performed in a single pass; or, by fitting two creasing tools, it is possible to perform creases from both the top and the bottom in one pass, ensuring the correct crease orientation for zig-zag folding. High-performance creasing machine with a maximum output of up to 14,000 sheets per hour. Easy-to-use controls allow for up to 100 creases or perforations per sheet and a memory capacity of up to 200 jobs. The machine can crease, perforate, and punch, making it ideal for WIRE-O binding and calendar production. This end-of-series machine can be equipped with the following optional tools: - Digital creasing kit (for both Head A and Head B) - Perforation kit 2/1-3/1-4/1 (for both Head A and Head B) - Micro-perforation kit (for both Head A and Head B) - 100 cm extension - Punching kit in various sizes Technical data: Min./max. sheet size: 8×10 cm / 50×70 cm (with optional extension 50×100 cm) Paper weight: 80 to 600 g/m² Programming: 200 programs (100 operations per program) Minimum crease distance: 0.1 mm Production speed in A4: 14,000 sheets/hour (with 1 crease) Power supply: 400 Volt three-phase + neutral, 50 Hz

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Revamped and upgraded 2018 for aluminium. Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn N° of straightening rolls: 19 rolls Bwjdpfx Aovtpdgebbjh Diameter of leveling rolls: 45 mm

Condition: ready for operation (used), Year of construction: 2002, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: fanuc, controller model: 16i MA, table width: 1,000 mm, table height: 500 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, overall weight: 9,300 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 8,000 h, spindle nose: HSK 63A, number of slots in tool magazine: 25, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, High-speed, high-precision vertical machining centre of Japanese manufacture. Furthermore, equipped with the following OPTIONS: MARPOSS wireless 3D workpiece measuring probe, swarf/chip conveyor, high-pressure coolant through the spindle, extended coolant system: 12 nozzles, 100 l/min capacity, electrospindle: 20,000 rpm, 22 kW, HSK 63A taper, with dedicated chiller, tool magazine expanded to 25 positions, FANUC high-dynamic drives (Alpha 22 and Alpha 30), ballscrews cooled by a dedicated chiller, linear optical scales, tool setter (length and breakage detection), Bwedpfxjxryb Ns Abbjh active tool load monitoring, ROTOCLEAR on the main door, FANUC SUPER GI option (Geometric Intelligent Control), FANUC RISC option (Reduced Instruction Set Computer), FANUC NURBS option (Non Uniform B-Spline), FANUC DATA SERVER option (160Mb), FANUC ETHERNET network port option, serial RS 232 output.

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: HEIDENHAIN, controller model: iTNC640, spindle speed (max.): 42,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 32, This 5-axis OPS INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain Control TNC 640, a high-frequency spindle with a speed range up to 42,000 rpm, and a 32-slot HSK-E40 tool changer. The machine offers a traversing speed of 30m/min and traversing paths of 550x400x400 mm. If you are looking to get high-quality milling capabilities consider the OPS INGERSOLL High Speed Eagle V5 machine we have for sale. Contact us for more information. Bwsdpjx D Ektefx Abbeh • Max. acceleration: 15 m/s² • Max. traversing speed: 30 m/min • Control cabinet ambient temperature: up to 33 °C (with heat exchanger) • Traversing paths (X/Y/Z): 550 x 400 x 400 mm • Drive system: Ball screw spindles with directly coupled AC servo motors • Measurement system: Absolute glass scales on all axes • Torque (S6 60%): 6.7 Nm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,269 h, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640 HSCI, total height: 2,450 mm, table load: 250 kg, overall weight: 7,200 kg, spindle speed (max.): 42,000 rpm, number of axes: 5, This 5-axis OPS INGERSOLL Eagle V5 was manufactured in 2017, featuring a robust vertical machining center design. It boasts a high-speed Fisher HSK E40 spindle with speeds up to 42,000 rpm and a 32-tool magazine. The machine includes a 4/5-axis tilting rotary table, enhancing its versatility for complex machining tasks. Consider the opportunity to buy this OPS INGERSOLL Eagle V5 vertical machining center. Contact us for more information about this machine. Additional equipment • 4/5-axis Tilting Rotary Table prepared for Pallet System Bsdpfxjyaqf Ne Abbewh • B-axis Tilting Range: −120° to +60° • C-axis Rotation: 360° • B-axis Speed: 25 rpm • C-axis Speed: 20 rpm • Keller Dust Extraction System • EROWA UPC Production Chuck Clamping System • Tool Length and Diameter Laser Measurement, Broken Tool Detection • Touch Probe (Renishaw) • Precision Pack III – 5-axis Thermal Compensation Machine Benefits Technical Machine Benefits • Spindle-to-table distance (min/max): 50–450 mm • Table design: fixed dimensions: 650 × 500 mm • T-slots: 5 × 14h12 • Torque (s1/s6 - 60%): 5. 9 nm / 6. 7 nm • Tool magazine capacity: 32 • Max. Workpiece size: Ø400 × 380 mm Extra Information ECOTEC Energy-saving Function Table Adapter for 4th and 5th Axes HR410 Wireless Remote Control EROWA UPC Basic Chuck with EROWA ITS100 Adapter Dimensions Machine Depth 2800 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 200900838, overall weight: 1,220 kg, For sale: Spiral dough mixer with a capacity of 340l/220kg dough, in very good condition, Pietroberto brand, with three bowls. Year of manufacture: 2009. Equipped with electronic thermometer, 2 speeds plus reverse. Hydraulic bowl lock to the machine. I also have bowl tippers for this mixer available from this offer. I have more bakery machinery for sale—please see my other listings. The stated price is net. Bwodpfx Aeyc N E Hobbjh For more information, please call 504 030 291

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Bedpfxjx U U Hbj Abbjwh Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] More information available upon request.

Condition: used, Year of construction: 1978, 40 1008 rated current 20 A Bsdpfswg Hunex Abbowh voltage 24 V weight of the machine ca. 3,5 t

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MK 4) • Infinitely variable speed control • Infinitely variable quill feed Bwedpsx Uwpxefx Abbeh • Thread cutting attachment • Two 18 mm T-slots each on rear and left of machine base • 3-axis digital readout • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose - table top min 40 mm, max 710 mm Distance spindle nose - base plate min 840 mm, max 1510 mm Drilling radius min 540 mm, max 1590 mm Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Tapping St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2,800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic system diagram Electrical wiring diagram