Used Hermle C 800 U for sale (122)

Condition: good (used), Year of construction: 1996, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 500 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, mount diameter: 40 mm, table length: 1,000 mm, table width: 500 mm, overall weight: 3,500 kg, X-axis / longitudinal 700 mm Y-axis / transverse 550 mm Z-axis / vertical 500 mm Table dimensions 1000 x 500 mm Spindle speed range stepless in 3 gear steps 25 - 4200 rpm Tool holder SK 40 Feed range X-Y-Z 1 - 10000 mm/min Rapid traverse X-Y-Z 10000 mm/min Weight approx. 3500 kg Control: Heidenhain TNC 407 - TNC 415 Nsdpfx Aoxg Rxbjd Sjwh

Condition: excellent (used), Year of construction: 1998, Hermle UWF 802 M Hermle UWF 802 M with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Travel distances X: 500 mm, Y: 430 mm, Z: 400 mm Table size 800 x 390 mm Spindle connection ISO 40 Spindle speed 71 to 3550 rpm, 18 steps Feed rate X and Y 2 to 1600 mm/min, stepless Feed rate Z 2 to 1000 mm/min, stepless Rapid traverse X and Y 1.6 m/min Rapid traverse Z 1 m/min Spindle drive 3 kW Mains connection 400 volts, 50 Hz - Spindle speed via 18 gear stages - Vertical milling head, swiveling to the right and left - Hydro-mechanical tool clamping, vertical and horizontal Nsdpfx Adozbrz Io Sswh - Automatic central lubrication - Coolant system located next to the machine - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Space requirement L x W x H 2000 x 1800 x 1950 mm Weight approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good condition. The machine is fully functional, of course. All slides move very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see for yourself what condition it is in.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 20,132 h, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, table width: 465 mm, table length: 800 mm, table load: 200 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HERMLE C600V was manufactured in 1999. It features a fully enclosed design with dual front sliding doors and an ergonomic tool changer system. The machine is equipped with a HEIDENHAIN control unit, ensuring precision and reliability. If you are looking to get high-quality machining capabilities, consider the HERMLE C600V vertical machining centre we have for sale. Contact us for further details. Nwjdpfx Aey T Htksd Soh - Control On: 48,840 hours- Machine On: 48,303 hours- Program Run: 19,244 hours- Drive On: 42,175 hours- Axes in Motion: 19,519 hours- Tool Magazine 1-10: 58 hours- Tool Magazine 11-20: 622 hours- Tool Magazine 21-30: 40,269 hours- Current Axis Coordinates: X = -236.820, Y = +421.759, Z = +186.835- Enclosure Style: Fully enclosed with dual front sliding doors and red ergonomic handles- Electrical Supply Connection: Overhead industrial power sockets (METEENCE units visible: 2x blue 230V outlets, 3x red 400V CEE industrial outlets)- Tool Changer System: Chain/pocket style automatic tool changer visible via top rear access panel

Condition: used, Year of construction: 1986, x-travel 390/410 mm y-travel 290/310 mm z-travel 380/400 mm total power requirement 4 kW weight of the machine ca. 1,25 t dimensions of the machine ca. 2100x2100x1700 m Nedpfx Aovylkcjd Sjwh technical data please see attachment!

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 355 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW Nwodstqmm Aspfx Ad Soh transmission ratio 3 tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min total power requirement 13 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Tool Room Milling Machine - Universal HERMLE - UWF 900 E - Spindle-Head swivable +/- 90°

Condition: used, Year of construction: 1986, x-travel 500 mm y-travel 360 mm z-travel 400 mm Control Siemens 810 tool taper SK 40 table surface area 800x390 mm T-slot - width 14H7 mm number of T-slots 6 T-slot - distance 63 mm turning speeds 20-4000 U/min transmission ratio 4 Feed 1-2000 mm/min rapid traverse 5 m/min total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,5x2,9x1,9 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Nwedpeyt R Eiofx Ad Soh If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1994, x-travel 850 mm y-travel 630 mm z-travel 550 mm table surface area 1200 x 550 mm spindle taper SK 40 spindle turning speed range 20 - 4200 U/min spindle drive 11,5 kW quill stroke 95 mm feeds longditudinal/cross/vertical 1 - 10.000 mm/min rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min control HEIDENHAIN, TNC 426 total power requirement 21 kW weight of the machine ca. 6 t Nwodpfx Asy Nnxaod Sjh Accessories: NC-dividing unit (= 4th axis) with tailstock, make HOFMANN, model RWNC-160; vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant

Condition: used, Year of construction: 1989, x-travel 600 mm y-travel 450 mm z-travel 400 mm table-size 850 x 440 mm spindle taper SK 40 Nedpfx Adsy Nnw Nj Sewh control HEIDENHAIN TNC 355 ATC 32 Pos spindle turning speed range 20 - 4000 U/min spindle drive 5,9 kW quill stroke 80 mm feeds longditudinal/cross/vertical 1 - 2000 mm/min power feed x/y/z 7200 N rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min total power requirement 12 kW weight of the machine ca. 3 t Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant

Condition: good (used), Year of construction: 1995, Control: HEIDENHAIN TNC 415 B Travel: X= 600, Y= 400, Z= 420 mm Speed range: 20 – 4000 rpm Gear stages: 3 Spindle taper: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Nedpfxow Uin Se Ad Sewh Rapid traverse z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electronic handwheel, various tools (without cabinet)

Year of construction: 1993, operating hours: 13,924 h, condition: excellent (used), x-400,y-330,z-350,Winkeltisch 630x335,SK 40, 40-6.000 U/min,Meßtaster , Nwjdpfofgz Rkox Ad Sjh Steuerung Heidenhain TNC 425

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, overall weight: 12,500 kg, controller model: iTNC 530, rotational speed (max.): 18,000 rpm, General Data Measurements width 3970 mm Measurements depth 4629 mm Dqmcjh Measurements height 3050 mm Machine weight 12700 kg Main Drive Number of spindles 1 Spindle speed range 16000 rpm Spindle motor power 10 kW Tool taper SK 40 Number of axis 3 Movement X-Axis Movement 1200 mm Y-Axis Movement 900 mm Z-Axis Movement 500 mm Table Outer length 1400 mm Outer width 900 mm This 3-axis HERMLE C 1200 V vertical machining centre was manufactured in 2003. It features a robust clamping table measuring 1400 x 900 mm and a high-performance milling spindle with a maximum power of 10 kW, torque up to 87 Nm, and speeds up to 16,000 RPM. Ideal for complex machining tasks, the HERMLE C 1200 V machine we have for sale offers precision and durability. Tool magazine can be dismantled so the width can be reduced to 2450 mm. Contact us for more information. Nwsdpfx Ajvambied Ssh Application Types Milling

Condition: used, Year of construction: 2005, 5-Axis Simultaneous Hermle U740 Travel: X-915 mm, Y-500 mm, Z-500 mm Control: Heidenhain iTNC530 Spindle speed: 18.000 U/min Spindle mount: SK40 Nodpoyxh Sfjfx Ad Sewh tool magazine: 16 seats B-axis: hydraulic clamping –5°/+95° NC rotary table: 630 mm max. table load: 500 kg probe: Heidenhain electric handwheel: Heidenhain table size: 1000 mm x 560 mm Spänewanne: .

Condition: not inspected (used), Tool Milling Machine HERMLE UWF 802 M - Travel Control HS 401 - Travel X/Y/Z: 500x430x400 mm - Spindle speed range: 18–3550 rpm - Stepless feed on all three axes - Rapid traverse 0–1.6 m/min on all three axes - Vertical and horizontal milling device - Tool holder ISO 40 - Hydraulic tool clamping - Central lubrication - Drive power: 6 kW - Work lamp - Chip tray - Documentation Dimensions (LxWxH): 1.9x1.8x1.9 m / Weight: 1900 kg Nwsdpfoy Ddz Hjx Ad Sjh Errors and omissions excepted.

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm table movement y: 150 mm table movement z: 280 mm spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm Nsdoflrg Tepfx Ad Sswh weight: ca. 680 kg

Year of construction: 2004, condition: excellent (used), used machining center Brand: Hermle Model: U740 Year: 2004 Serial No.: 16716 Weight: 7300kg Power: 26KVA CNC: Heidenhain iTNC 530 Type: 4 + 1 axis (Spirsin model 8117CF/225) 16 tool charger. General technical data: Fast forwards: - X axis: 30m/min. - Y axis: 30m/min. - Z axis: 20m/min. - Axis B: 15 rpm. Nwedpfoktkdbsx Ad Ssh Tours: - X axis: 915mm / 895 to 915mm (Tool holder head -5º to 90º / Tool holder head > 50º to 95º) - Y axis: 500mm (In all positions of the tool holder head) - Z axis: 500mm / 470mm (Tool holder head 90º-95º) Positioning precision in the 3 axes 0.010mm (Temperature at 20º) Maximum load on table: 700kg Table measures: 900x500mm Spindle rpm: 12,000rpm Hollow Shaft Water Cooled Spindle Motor Milling head with automatic degree rotation from -5º to +95º sk 40 tool clamping system 16 tool magazine - Maximum tool diameter: 80mm - In case of adjacent free posts maximum tool diameter 100mm - Maximum tool length: 250mm - Maximum tool weight 6kg Cooling system by coolant with a 210L tank and a flow rate of 30Ltrs./min. It has an electronic control for manual handling of the machine. Chip collector: - Brand: BMF - Model: SPE 63/12-300 Z600 - Year: 2004

Year of construction: 1991, condition: good (used), Hermle UWF 802 M machining center with Hermle HS control system. The machine is in good working order and ready for demonstration. Njdedubmkjpfx Ad Sjwh

Condition: used, Year of construction: 1988, x-travel 700 mm y-travel 550 mm z-travel 500 mm spindle taper ISO 40 control Heidenhain type TNC 155 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Nwsdpfx Adoyuttlj Seh possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, mount diameter: 40 mm, total height: 1,800 mm, total width: 1,500 mm, total length: 1,600 mm, table width: 800 mm, table length: 395 mm, For sale is a conventional milling machine from the Hermle brand and the type UWF 801 The machine is fully functional, easy to use and yet efficient, which makes it ideal for the DIY enthusiast but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° ° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 steples mm/min Feed: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Nwjdsvtpl Repfx Ad Ssh Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: repair required (used), Year of construction: 1989, functionality: limited functionality, !!! SPECIAL OFFER!!! For sale are 2 active milling machines of the brand Hermle and the type UWF 801 Nwodpfx Aet Ifm Ned Sjh Price for both machines in a package One machine has an error when moving in Y, the 2nd machine is missing relays. The idea would be to make one machine out of 2. The value of a functional machine would be approx. 10,000 € What makes the machine special is its active control, which allows it to set feeds that stop at a predetermined level. The machine is easy to operate and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle holder ISO: SK40 Control: TNC 114 Spindle head swivels left and right: right/left = 90° ° Vertical quill stroke: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed rate:: X+Y: 4 - 1600 steples mm/min Feed rate:: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 iand Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, feed length X-axis: 500 mm, feed length Y-axis: 430 mm, feed length Z-axis: 400 mm, For sale is a package of four identical Hermle UWF 801 milling machines. Two of the machines have minor defects that require repair, while the other two are fully functional. This package is offered, but individual machines are also available for sale at the regular price. Technical specifications: X-travel: 500 mm Y-travel: 430 mm Z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 step mm/min Feed: Z: 4 - 1000 step mm/min Rapid traverse: X+Y: 1.6 m/min and Z: 1 m/min Nwedjv Tc Apjpfx Ad Seh Table size: 800 x 395 mm Spindle drive: 3 kW Approx. weight: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Tool holders, tools, and vice are not included in the package. However, they can be offered individually. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Condition: repair required (used), functionality: limited functionality, travel distance X-axis: 500 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, mount diameter: 40 mm, total height: 1,800 mm, total width: 1,500 mm, total length: 1,600 mm, table width: 800 mm, table length: 395 mm, For sale is a conventional milling machine with active control from Hermle and type UWF 801 A hydraulic hose is defective and has already been removed and replaced. After installation, the machine is fully functional and ready for use (we can do this for you) The machine is easy to use and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° ° Njdovtpm Ujpfx Ad Sewh Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 steples mm/min Feed: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 430 mm, feed length Z-axis: 400 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 17 rpm, For sale is a CNC / conventional milling machine of the Hermle brand and type UWF 802 M The machine is in good - very good condition and ready for immediate use Technical data Year of construction: 1994 Control: Heidenhein TNC 124 Clamping: Rigid angle table Speed: 17 to 3550 rpm Feed: Stepless Drive power: 6 KW Travel X 500 mm Travel Y: 430 mm Z travel: 400 mm Tool holder SK40 Dimensions: L*W*H: 1800*1800*1900 mm Weight: 1.8 t On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Nwsdpfx Adsrvitle Sjh For further information or contact options, please visit our website

Condition: good (used), CNC - Universal Milling Machine HERMLE UWF 902-S - Heidenhain 426 control - Year of manufacture: 1997 - Travel X/Y/Z: 600-450-500 mm - Tool holder: SK 40 - Vertical - horizontal milling unit - Boring quill - Coolant system - Swivel/angle table - Machine enclosure - Documentation Dimensions (LxWxH): 3.9x2x2 meters / Weight: 4000 kg Nodpfx Adjytnpxo Sewh Subject to errors and omissions.

Condition: not inspected (used), x-travel 850 mm y-travel 440 mm Nwsdpfx Adeud Ille Seh z-travel / mm Control TNC 355C

Condition: excellent (used), functionality: fully functional, Universal milling machine Hermle UWF 802M with HS 401 path control GREAT CONDITION!! Technical data: >> Year of manufacture approx. 1995 Machine no. 10212 >> Rigid angle table >> Speed: 17 to 3550 rpm >> Feed continuously variable in 3 axes from 0 to 1600 mm/min >> Drive power: 6 KW >> Travels X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Dimensions length 1.8 m, width 1.8 m, height 1.9 m Accessories and equipment: >> HS 401 line control >> Hydraulic tension vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions for the control and programming examples About the machine : A Hermle UWF 802M tool milling machine with HS401 path control is on offer. This universal milling machine is in very good condition. A very easy-to-use path control. Length and radius corrections are possible in the program. No major CNC knowledge is required for this. Of course, the Hermle can also be operated manually without a control. The machine also has hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle was mechanically and electrically tested by us. Take the opportunity to view and try out the Hermle on site under power. Nwodpfxjv Ed U Do Ad Seh