Used Hermle C 800 U for sale (159)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,249 h, functionality: fully functional, machine/vehicle number: 15137, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, table width: 800 mm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 28, Well-maintained machine with a spindle from 2022 TECHNICAL DETAILS Longitudinal travel (X): 1,000 mm Transverse travel (Y, slide): 630 mm Vertical travel (Z, milling head): 550 mm Control: Heidenhain TNC 430 C-axis: Full-featured A-head: Manually swivelable to 0° and 90° Spindle Spindle speed (max.): 7,000 rpm Spindle type: Geared spindle with high torque in the lower speed range Special feature: Suitable for M30 synchronous thread cutting Spindle head swivel (manual): ±90° Milling spindle diameter in the front bearing horizontal/vertical: 80 / 55 mm Tool changer: 28-station Working area Milling spindle vertical - Distance from milling spindle to top edge of rotary table: 130 - 680 mm Milling spindle horizontal - Milling spindle to the rotary axis of the milling head, rotary table: 140 - 690 mm Milling spindle vertical/horizontal - Distance from the milling spindle axis to the rotary axis of the milling head: 120/110 mm NC rotary table 4th axis: Ø 800 mm Condition & Maintenance Spindle: renewed 2022 Maintenance: carried out regularly Geometry: laser measured 2022 Tool changer: lifting unit recently replaced Maintenance reports: available MACHINE DETAILS Control on: 35,165 h Machine on: 21,574 h Program run: 11,750 h Spindle on: 10,249 h Axes in motion: 10,285 h Weight: 6,500 kg Rated power (apparent power): 17 kVA Input current: three-phase Iisdpfx Aewmm D Nsfioh EQUIPMENT - Documentation and manual - Chip conveyor - A-head with manual tilt function to 0° and 90° - Tool changer with new lifting unit - Spindle with high performance in the lower speed range, suitable for M30 synchronous threads - Maintenance and geometry reports available

Condition: good (used), Year of construction: 1999, Hermle U 1000 T, Built in 1999, Heidenhain TNC 426 control, X/Y/Z travel 1000/630/550 mm, 16-station tool changer, SK 40 tool holder, Spindle speed up to 7,000 rpm, Vertical spindle quill stroke 75 mm, Universal milling head 0-90°, Direct measuring systems, Table size 1200 x 630 mm, Heidenhain TS 632 touch probe, Electronic handwheel, Iiedpfx Aswlqimofijh

Condition: used, Hermle C 600 U 5-axis CNC universal machining center Milling machine Spindle on : 28383 h Isdpjuqap Rsfx Afisih Control on: 64298 h X-axis: 600mm Y-axis: 450mm Z-axis: 450mm Spindle holder: HSK A 63 Feed range: 1-30000mm/min Speed: 35m/min rotational speed: Ø turntable: 280mm Rotation range: A-axis: +20 / - 90° Rotation range C-axis: 360 Control: Heidenhain iTNC 530 Year of manufacture: 2002 Weight: approx. 6500 kg You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 1969, condition: used, machine/vehicle number: 304, Manufacturer: Hermle Model : FW 800 Machine No. : 304 Year of manufacture: 1969 Weight: approx. 1000 KG General / technical data: well preserved used horizontal milling machine with hydraulic program control (cam control bar) for automatic production process. admission: SK 30 travel: X 400mm Y 370mm Z 165mm Speed: 18 pieces mechanically switched in 2 motor steps 85, 120, 145, 180, 205, 280, 300, 400, 470, 590, 680, 840, 100, 1210, 1420, 1780, 2030, and 3050 rpm feeds: in X and y axis stepless hydraulic in z ( horizontal milling spindle) manual table dimensions (rigid table): 800mm x 220mm power supply / spindle motor power: 380Volt 50 HZ / 1,5 KW approx. space requirement of the machine: 1900mm x 1100mm x 1700mm (bxtxh) Accessories / special equipment: - Rigid fraestable - Item various tool holders - spittoon - cooling device - Machine documentation with program instructions Remarks The machine is in a very good condition according to its age. The machine is preferably designed for the production of small and medium series. The machine has a simple hydraulic program control controlled by a cam switch. Iodpfx Afsdgrwdeijih

Condition: ready for operation (used), Year of construction: 2000, operating hours: 14,430 h, functionality: fully functional, machine/vehicle number: 13479, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 300 kg, rotary table diameter: 500 mm, spindle speed (max.): 7,000 rpm, Machine can be shipped free of charge for €1,850 net! TECHNICAL DETAILS Control: Heidenhain TNC 410 Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table NC rotary table: 500 mm C-axis: 360° B-axis: ± 30° Speed: 11 rpm Resolution: 0.001° Part accuracy: ±15'' Table load: 300 kg Drive Drive power (100% / 40% duty cycle): 7.5 / 11 kW Torque (100% / 40% duty cycle): 266 / 390 Nm Speed: 20 - 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Swivel range: 0 - 90° Feed drives Feed forces X, Y and Z: 8,000 N Rapid traverse: 15 m/min Diameter and pitch of the feed spindles: 32 / 10 mm Measuring system Direct position measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z axis according to VDI/DGQ 3441: 0.010 mm Tool system Spindle cone: SK 40 (similar to DIN 2079, for tool holders according to DIN 69871 A) Number of tool positions: 16 pieces Tool diameter: 80 mm Tool diameter with free adjacent positions: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Operating voltage: 400 V / 50 Hz Iiedpfxevn Si Io Afieh Total power: 14 kVA Weight: 4,800 kg Dimensions: 3.0 x 2.3 x 2.2 m Control switch-on time: 50,052 h Program run: 15,142 h Spindle switch-on time: 14,430 h Coolant system Tank capacity: 120 l Flow rate at a flow pressure of 3 bar: 24 l/min

Condition: excellent (used), Year of construction: 2017, operating hours: 16,193 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, A similar machine was recently successfully auctioned! Bidding obliges the buyer to pick it up on time by March 31, 2025! TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Centering hole: Ø 32 H7 Swivel range: +91° / -139° Drive type C axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load One-sided drive: 600 kg Iodpov Hmdqofx Afisih Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Cooling lubricant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 24,403 h Machine switch-on time: 23,349 h Program run: 16,193 h Spindle time: 13,916 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: good (used), Year of construction: 2003, operating hours: 27,804 h, functionality: fully functional, machine/vehicle number: 16165, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Machine type: Machining center Manufacturer: HERMLE Type: U 740 Iodpfxsu Dnito Afieih Control: HEIDENHAIN iTNC 530 Serial number: 16165 Year of manufacture: 2003 Production times Switch-on time: 86,672 hours Working time: 34,362 hours Spindle running time: 27,804 hours Axes and table Total number of axes: 5 Table length: 900 mm Table width: 500 mm Number of T-slots: 8 Distance between T-slots: 65 mm T-slot width: 14 mm Max. Workpiece weight on the table: 700 kg Longitudinal travel (X-axis): 915 mm Transverse travel (Y-axis): 500 mm Vertical travel (Z-axis): 500 mm Workpiece size max. Length: 900 mm Width: 500 mm Height: 500 mm Tool changer Number of tools: 16 Tool diameter max.: 125 mm Diameter with free secondary positions: 180 mm Maximum tool length: 300 mm Maximum tool weight: 6 kg Milling head Swivel range: -5° to +95° Tool holder: SK 40 Spindle Speed infinitely variable from: 20 rpm to: 12,000 rpm Feed rates Rapid traverse lengthwise: 30 m/min Rapid traverse: 30 m/min Vertical rapid traverse: 20 m/min Connections and power Compressed air connection: 6 bar Electrical connection: 400 V, 50 Hz, 3-phase Spindle power: 32 kW Total power requirement: 26 kVA Noise level: 78 dB(A) Dimensions and weight Machine weight approx.: 7,300 kg Dimensions (L x W x H): 2,760 mm x 2,390 mm x 2,370 mm EQUIPMENT Three-jaw chuck Ø 200 mm Workpiece probe: HEIDENHAIN TS 640 Dividing head 4th axis: HOFMANN, type RW/NC-160 Rinsing gun RS 232 interface Ethernet interface Control cabinet Air conditioning unit Machine can be inspected assembled and energized for inspection after consultation.

Condition: excellent (used), Year of construction: 2019, operating hours: 11,832 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Swivel range: +91° / -139° Ijdpfx Aevw Sdqsfijih Drive type C-axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load one-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 20,178 h Machine switch-on time: 19,094 h Spindle time: 11,832 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 5,000 h, General Data Measurements width 2210 mm Measurements depth 2700 mm Measurements height 2930 m Machine weight 7200 kg Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Feed Force 8000 N X-Axis Rapid Traverse 35 m/min Y-Axis Movement 600 mm Y-Axis Feed Force 8000 N Y-Axis Rapid Traverse 35 m/min Z-Axis Movement 500 mm Z-Axis Feed Force 8000 N Z-Axis Rapid Traverse 35 m/min Table Table load 1000 kg Tools Number of index 30 This 3-axis HERMLE C800V vertical machining center was manufactured in 1999. It features a robust SIEMENS Sinumerik 840D control, a large work surface of 1,000 mm x 560 mm, and a maximum table load of 1,000 kg. The machine offers rapid traverse rates up to 35m/min and includes 30 tool places. Ideal for demanding machining tasks. Contact us for more information about this machine. Isdpfxjxpkraj Afieih Application Types Milling

Condition: excellent (used), HEIDENHAIN TNC430 with B + C axis Working travels 800 x 600 x 500 mm Table size Ø 280 mm Table swivelling +/-110° Table rotating 360° Iijdpfx Aok Dz Ngefieh Spindle taper HSK63 Spindle speeds -15'000 rpm tool changer 30 pos. Coolant through spindle 3D tracer Renishaw MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 1,000 mm, table length: 560 mm, TECHNICAL DETAILS Travel distances x-axis travel: 800 mm y-axis travel: 600 mm z-axis travel: 500 mm Table Clamping surface: 1,000 × 560 mm Spindle Milling spindle speed: 10,000 rpm Tool holder – diameter: SK40 mm Control CNC control: TNC430 Tool magazine Number of tools: 30 MACHINE DETAILS Electrical data Total power requirement: 35 kW Weight and dimensions Machine weight: approx. 8.50 t Space requirement: approx. 2.90 × 3.50 × 3.00 m Iiedpfewynucox Afish EQUIPMENT Swivel vice integrated into the left side panel with counter bearing (controlled 4th axis) Centre height 160 mm / centre width 500 mm Wireless measuring probe MP10 Chip tray with coolant pump

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 11721, Description: Control: Heidenhain TNC 430 Working range: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Tool holder: HSK40 Iijdpfx Astq H Sqofish Spindle speed Max 8,000 rpm Tool magazine: 30 places Max. Tool diameter: Ø 80 mm; with adjacent free spaces Ø125 mm. Max. Tool length: 300 mm. Max. Table load: 1,500 kg Dimensions and weight: Machine weight: approx. 7,200 kg Machine dimensions approx. : Width: 3.7 m; Depth: 4.3 m; Height: 3.0 m.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 5,000 h, General Data Measurements width 2020 mm Measurements depth 2500 mm Measurements height 2750 mm Machine weight 6700 kg Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Number of axis 3 Movement X-Axis Movement 600 mm X-Axis Feed Force 6000 N Iisdpexpkrmjfx Afish X-Axis Rapid Traverse 35 m/min Y-Axis Movement 450 mm Y-Axis Feed Force 6000 N Y-Axis Rapid Traverse 35 m/min Z-Axis Movement 450 mm Z-Axis Feed Force 6000 N Z-Axis Rapid Traverse 35 m/min Table Table load 500 kg This 3-axis HERMLE C600V vertical machining centre was manufactured in 2001. It features a Siemens Sinumerik 840D control, a rapid traverse of 35m/min, and a coolant system with a 200-liter tank. With a table size of 800 mm x 465 mm and a maximum load of 500 kg, it's ideal for diverse milling tasks. If you are looking to get high-quality milling capabilities consider the HERMLE C600V machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Iedpfx Ajxpil Ssfijih Siemens 840D Control 5 Axis Simultaneous XYZ: 450 x 600 x 330mm 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Maximum table load 300Kg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Swarf Conveyor Coolant Tool Setter Spindle Probe

Condition: used, Year of construction: 1990, travel distance X-axis: 850 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, This Hermle UWF 1200 H - CNC universal milling machine is being auctioned online in our industrial auction/machinery auction for mechanical engineering companies—machine park clearance and restructuring. Iisdpexpcumefx Afijh

Year of construction: 1989, condition: good (used), Machine: Control Heidenhain TNC 355 Built in 1989 Travel: X 600 mm method path Y 450 mm process path Z 400 mm method Spindle speed 20 – 4000 min-1 Angular size 850 x 440 mm Swivel cull 650 x 395 mm Ijdpfxod I Uwms Afijih Electronic hand wheel The machine is still under power and is in good condition.

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 S Year of Manufacture: 1995 Operating Hours: 65,071 Control: HEIDENHAIN TNC 426 Working Area X/Y/Z: 600 x 450 x 500 mm Spindle Speed Range: 20 - 6,300 rpm Tool Holder: SK 40 M & H 3D Probe (for workpiece measurement) Vertical-Horizontal Milling Attachment Quill Coolant System Swivel Table: 900 x 458 mm Weight: 4,000 kg Machine Dimensions (LxWxH): approx. 3,900 x 2,000 x 2,000 mm Iedpfev Rxa Ssx Afieih 151025

Condition: good (used), machine/vehicle number: 5387, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, mount diameter: 40 mm, total height: 1,900 mm, total width: 1,200 mm, total length: 1,500 mm, table width: 280 mm, table length: 700 mm, overall weight: 1,000 kg, Including three-axis digital readout Isdpfswxpx Hox Afijih

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 18000 rpm Tool taper SK 40 Additional Equipment Tool Magazine: Additional magazine ZM157 Tool Breakage/Measurement: BLUM tool breakage/measurement Measuring Probe: Heidenhain Event Messenger: Available Electrical Heat Compensation: Provided External Blowing Air: Provided / Oil Mist Extraction: Provided / Chip Trolley: 450 liters Rotating Transparent Window: Available Additional Accessories: Manual control module, flange for extraction 1, bed flushing, sealing air for scales, machine license TCS-Soflex Iijdpfx Afexn U Ayeieh This 5-axis HERMLE C30U + RS Automation was manufactured in 2006, offering advanced capabilities for precision machining. Ideal for complex geometries, this vertical machining centre represents a significant asset for enhancing your production efficiency. Consider the opportunity to buy this HERMLE C30U vertical machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 1991, functionality: fully functional, CNC milling machine HERMLE UWF 900 W year of construction 1991 Control: Heidenhain TNC 360 x-path: 600 mm y-path: 400 mm z-path: 420 mm Spindle holder ISO: SK 40 Vertical quill stroke: 75 mm Speed range: 20 ... 4000 rpm Spindle head swivels left and right: 90° left / right ° Feed rate:: X/Y/Z: 1...6000 mm/min. Feed rate:: X/Y: 7 m/min. + Z: 6 m/min. Table size: 900 x 460 mm Iodpexhcu Defx Afieih Table load: 400 kg Total power requirement: 13 kW Machine dimensions approx. LxWxH: 4.0 x 3.8 x 2.0 m Weight approx.: 2300 kg Equipment: - Separate production cell - Coolant device - Control panel with swivel arm - SK 40 Heidenhain touch probe - handwheel

Condition: good (used), Year of construction: 1996, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 500 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, mount diameter: 40 mm, table length: 1,000 mm, table width: 500 mm, overall weight: 3,500 kg, X-axis / longitudinal 700 mm Y-axis / transverse 550 mm Z-axis / vertical 500 mm Table dimensions 1000 x 500 mm Spindle speed range stepless in 3 gear steps 25 - 4200 rpm Tool holder SK 40 Feed range X-Y-Z 1 - 10000 mm/min Rapid traverse X-Y-Z 10000 mm/min Weight approx. 3500 kg Control: Heidenhain TNC 407 - TNC 415 Isdoxg Rxbepfx Afieih

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, table width: 520 mm, table length: 900 mm, overall weight: 4,500 kg, controller manufacturer: Heidenhain, TECHNICAL DETAILS Table size: 900 x 520 mm MACHINE DETAILS Control: Heidenhain Installation dimensions LxWxH: 3.16 x 3.62 x 2.37 m Weight: 6,000 kg Electrical data Operating voltage: 400 V / 3~ Mains frequency: 50 Hz Control voltage: 24 V Total rated current: 23 A Total power: 16 kVA Weight: 4,500 kg Iodpfsxl Sy Djx Afijih

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control system: HEIDENHAIN TNC 426 Travel range X/Y/Z: 600 x 450 x 500 mm Iiodpfx Asv Rpr Sefioh Swiveling table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm 151025

Condition: ready for operation (used), Year of construction: 2007, operating hours: 21,007 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 18000 Spindle motor power 15 kW Number of axis 5 Isdpfoxnd Tzsx Afijih Movement X-Axis Movement 600 mm Y-Axis Movement 450 mm Z-Axis Movement 450 mm Table Table load 300 kg Additional Equipment Through spindle cooling 80 bar: -Renishaw workpiece probec/ -Blum laser This 5-axis HERMLE C20U was manufactured in 2007, featuring a robust vertical machining center design. It boasts a spindle speed of up to 18000 rpm and a spindle power of 15 kW. The machine includes a 250mm table capable of handling loads up to 300 kg and a versatile 30-position tool changer. Ideal for piece or small batch production. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller manufacturer: Heidenhain, table width: 480 mm, table length: 900 mm, overall weight: 7,300 kg, Equipment: documentation/manual, TECHNICAL DETAILS Isdoxl Sunjpfx Afijih Fixed table: 900 x 480 mm MACHINE DETAILS Control: HEIDENHAIN Electrical Data Net weight: 7,300 kg Operating voltage: 400 V / 3~ Mains frequency: 50 Hz Control voltage: 24 V Total power: 26 kVA Total rated current: 37 A Weight: 6,300 kg EQUIPMENT Tool changer