English
German German German English English French French Spanish Spanish Italian Polish Russian Belarusian Dutch Ukrainian Estonian Turkish English English English Czech Danish Finnish Swedish Norwegian Bokmål Maltese Luxembourgish Greek Lithuanian Latvian Kazakh Icelandic Portuguese Portuguese Spanish Spanish Hungarian Slovak Romanian Romanian Slovenian Serbian Serbian Albanian Croatian Bulgarian Macedonian Bosnian Hebrew Arabic Hindi English Indonesian Korean Japanese Thai Malay Vietnamese Chinese Chinese Persian Bengali Pashto Urdu

Hermle fw 801 for sale

Your location was not identified (Edit)
Universal milling machine, vertical / horizontal from a training workshop Manufacturer Hermle Type FW801 Chuck SK40 automatic feed in all three axes Digital display in three axes Machine technically in very good condition under current demonstration ready Technical data: Procedures x = 350 y = 150 z = 220 mm Spindle speeds from 50 to 3,150 rpm infinitely variable Vorschubgeschwindigkeite continuously about Rotary by 10 mm to 5,000 mm / min Spindle retainer: SK40 Without the Vice o... more
4
Berlin, Germany Germany
dealership location
17594 km
1979
ready for operation (used)
Including tool cones and clamping devices. Beq2vw0jf7 more
Universal milling machine, vertical / horizontal from a training workshop Manufacturer Hermle Type FW801 Chuck SK40 automatic feed in all three axes Digital display in three axes Machine technically in very good condition under current demonstration ready Technical data: Bdkustydj3 Procedures x = 350 y = 150 z = 220 mm Spindle speeds from 50 to 3,150 rpm infinitely variable Vorschubgeschwindigkeite continuously about Rotary by 10 mm to 5,000 mm / min Spindle retainer: SK40 more
Univ. tool room milling machine HERMLE UWF 801 type Masch. No. 5089 built in 1981 Routes x 500 mm, Y: 430 mm, Z: 400 mm Table size 800 x 395 mm ISO 40 spindle adaptor Spindle speed 63 up to 2800 RPM 12 steps Feed X and Y 4 up 1600 mm/min.-stepless Feed Z 4 up to 1000 mm/min stepless Rapid traverse X and Y 1.6 m / min. N0qwavg2 Rapid traverse Z 1 m / min. Spindle motor 3 kW Power supply 400 Volt, 50 Hz Table load of 250 kg -3-axis digital display HEIDENHAIN ND 750 -Vertical milling... more
For sale is this well maintained quality machine from Hermle with a lot of accessories such as vice, cutter holders, drill chuck, pads, etc. Ideal for the small workshop, because very little space is required. Inspection is possible in Romanshorn on the river.x-path 500 mmy-path 430 mmz-path 400 mmCNC-control TNC 135 HEIDENHAIN Spindle ISO 40 Spindle speeds 50 - 2500 rpmTable size 800 x 390 mmfeed rates X-axis 2 - 1600 mm/minfeed rates Y-axis 2 - 1600 mm/minfeed rates Z-axis 2 - 1600 mm/minquino... more
Hermle UWF 801 tool milling machine with Heidenhain 3-axis digital display. Machine is in good operational condition, ready to be demonstrated under power. Bfimrker3d more
Control Unit TNC 135 Longitudinal movement 500/510 mm Transverse movement 430/450 mm Vertical movement 400/410 mm Milling spindle: Spindle head (mounting SK40) according to DIN 2079 Steep taper no. 40 Insert exchangeable M 16 for S 20x2 Be0x8jdvxe Vertical clamping table: Clamping surface 800x220 mm T-slots: number 4, width 12 (H7) mm distance 45 mm Remove Top edge Clamping Table vertical for the 1st T-groove 45 mm Remove clamping Table vertical 205 mm (see ... more
Hermle UWF 801 universal milling machine with Heidenhain digital display and manual tilting swivel table Technical data: Bzumexb Spindle speed: 50-2,800 min Recording: SK 40 Travel axles: X-axis: 500mm Y-axis: 430mm Z-axis: 400mm Manual tilting pantable more
Condition is not checked. Technical data: Brand: Hermle Type: UWF 801 Routes X: 500 mm, Y: 430 mm, Z: 400 mm Table size 800 x 395 mm Spindle holder ISO 40 Spindle speed 63 to 2800 rpm 12 steps Feed X and Y 4 to 1600 mm/min. infinitely variable Feed Z 4 to 1000 mm/min. infinitely variable Rapid speed X and Y 1.6 m/min. Pifjznoa Rapid response Z 1 m/min. Spindle drive 3 kW Mains connection 400 volts, 50 Hz Table load max. 250 kg more

New machines via email!

Yes, send news from this list to my inbox!
Stay updated!
You can create a label.
How often do you want to be notified about new listings?
3
Gorxheimertal, Germany Germany
dealership location
18015 km
1981
unexamined (used)
Nr. 2179: 1 gebr. Universal Werkzeugfraesmaschine Fabr. HERMLE Typ UWF-801, Bauj. 1980 / Modernisierung in 1999 mit Heidenhain TNC-124 Arb.-Ber.: 500 x 430 x 400 mm Antriebsleistung: 3 kW Zubehoer: Starrtisch 800 x 350 mm Spaenewanne, automatische Werkzeugklemmung, Etv8aj2 Kuehlmitteleinrichtung, Bedienungsanleitung, elektronisches Handrad im Bedienpult. Sonstiges: Spindel ISO-40, Drehzahlbereich 45-2000 U/min, Vorschubbereich 4-1600 (1000) mm/min Eilgang 1,6 (... more
6
Langenargen, Germany Germany
18025 km
1977
excellent (used)
Table size 710 x 190 mm X-crossway 150 mm Y-Longitudinal path 390 mm X-Vertical route 280 mm Engine power 1.1/1.8 KW Engin heat. 700/1400 U/min Tool recording SK 30 Vertical head SK 30 Various milling thorns Coolant device Eqb8fq2 more
4
Staufenberg, Germany Germany
dealership location
17876 km
used
Milling machine Fabr. HERMLE type FWH 630 Fabr.# 2289 Technical data: Table size 630 x 175 mm Tischlaengsweg manual 288 mm Tischlaengsweg motor 283 mm Table cross travel d. hand wheel 125 mm Table way vertical d. handle 92 mm Spindle speed 100-1300 RPM. Bf2iyb0q Spindle mount MT 3 Drive power 1.1 / 1.8 kW Feed motor 0,25 kW Weight approx. 550 kg Dimensions 1000 x 1000 x 1300 mm high with -Cooling device -mot. Tischlaengsvorschub -Vertical milling head MK 3, Tiltable -all 3 a... more
Description Head 90 ° swiveling Accessories: Digital display, vise, 4 shots, support for horizontal machining. Meaki Technical data: Table 175 x 600 mm x way 280 mm y-way 125 mm z-WEG 225 mm RPM 100-1300 RPM Feed 11-320 mm / min Recording ISO 30 Machine weight approx. 500 kg more
A used very well-preserved tool room milling machine with break-in control HEIDENHAIN TNC 114 B Hydraulic tool clamping Coolant system Machine vise Tool cart tools T0l88mkt More tech. Data see PDF document. more
6
Hövelhof, Germany Germany
dealership location
17911 km
1969
used
Manufacturer: Hermle Model: FW 800 Machine no.: 304 Year of construction: 1969 weight: 1000 KG General information / technical data: well-preserved used horizontal Fraesmaschinemit of hydraulic program control (cam control bar) for automatic production process Recording: SK 30 Traverse paths: X 400 mm Y Z 370 mm 165 mm Speeds: 18 piece mechanically switched 2 engine levels 85, 120, 145, 180, 205, 280, 300, 400, 470, 590, 680, 840, 100, 1210, 1420, 1780, 2030, and 3050 RPM feeds: in the... more
Indramat CSB01. 1N-PB-ENS-NNN-NN-S-NN-FW interface R911305275, serial number according to the photo, used, low wear, 100% functional, included with com. photos Bff7p9zog3 more
Shunt wound motor, three-phase motor, electric motor, motor for Stitchers, collect staplers, Drehzahlgesteuert, between, Slipring motors, slip ring motor Iwjcxya3q Power 28 kW Speed- Shaft ø 38 mm Type B5 Protection class IP54 Dimensions 900/480/H390 mm Weight 240 kg more
Vehicle data - make: people - type: DFW2D AL / / 503 hours -Drive type: diesel - carrying capacity: 2000 kg - load Centre of gravity:-lifting height: 0 mm - range: 0 mm - year: 2004 - operating hours: 0 - internal No.: E0521 _ Beilcski2h Mast data - mast type:-lifting height: 0 mm - height: 2100 mm - free lift: 0 mm - carriage: 0 mm - forks: 0 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2100 mm - weight: 2170 kg _ Battery & charger - battery voltage: 0 V - batte... more
Universal milling machine Hermle UWF 802M with HS 401 line control Super CONDITION !!Technical data: ᐳᐳ Year of construction approx. 1994 Machine no.10546ᐳᐳ Rigid angular table ᐳᐳ Speed: 17 to 3550 U/minᐳᐳ Feed infinitely variable in 3 axes from 0 to 1600 mm/min ᐳᐳ Drive power .:6 KW ᐳᐳ Travels X/Y/Z: 500/430/400 mm ᐳᐳ Vertical quill and horizontal quill - SK40ᐳᐳ Hydraulic tightening system ᐳᐳ Weight approx 1800 Kgᐳᐳ Dimensions Length 1.8 m , Width 1.8 m , Height 1.9 m Accessories and equipment:... more
10
Göppingen, Germany Germany
dealership location
17982 km
2004
used
x-travel 850 mm Itgh9rd y-travel 700 mm z-travel 500 mm total power requirement kW weight of the machine ca. 10500 t dimensions of the machine ca. m more
In good technical condition, year 1983. Table length: 1130 mm. Table width: 1250 mm. Longitudinal feed: 820/850 mm. Transverse movement: 300/330 mm. Engine power: 4 kW. Machine dimensions: 1670 x 2500 x 1700 mm. Benkzvpolf Machine weight: 1.850 kg. Accessories: Slotting head. more
5
Kaiserslautern, Germany Germany
dealership location
18085 km
2000
ready for operation (used)
General Data Machine weight 6000 kg Control Unit Brand HEIDENHAIN Model TNC 426 Main Drive Spindle speed range 20 – 7000 Spindle motor power 12 kW Movement X-Axis Movement 1275 mm X-Axis Working Feed 20000 mm/min X-Axis Rapid Traverse 15/20 m/min Y-Axis Movement 630 mm Y-Axis Working Feed 20000 mm/min Bt7tiixh Y-Axis Rapid Traverse 15/20 m/min Z-Axis Movement 550 mm Z-Axis Working Feed 20000 mm/min Z-Axis Rapid Traverse 15/20 m/min Tools Type of tool holder SK 40 This HERMLE U 1000 S Unive... more
Snow shovel, snow thrower with roles Ptg7ke Ejection adjustable Working width 390 mm 1130/460/H950 dimensions mm Weight 15 kg more
3
Hochheim am Main, Germany Germany
dealership location
18019 km
1992
used
Machine Built: 1992 Cutting length 4300 mm Cutting width 4300 mm Cutting height 100 mm Engine 11 kW Prescribing motor power 1.5 kW Saw blade diameter 400 mm Scribble 200 mm Feed speed backwards 0-40 m/min Space requirement 6950 x 7485 mm Availability: short-term Place of storage: Röllbach Bfesyceo9o more
Universal milling machine Hermle UWF 802M with HS 401 line control Super CONDITION !!Technical data: ᐳᐳ Year of construction approx. 1994 Machine no.10545ᐳᐳ Rigid angular table ᐳᐳ Speed: 17 to 3550 U/minᐳᐳ Feed infinitely variable in 3 axes from 0 to 1600 mm/min ᐳᐳ Drive power .:6 KW ᐳᐳ Travels X/Y/Z: 500/430/400 mm ᐳᐳ Vertical quill and horizontal quill - SK40ᐳᐳ Hydraulic tightening system ᐳᐳ Weight approx 1800 Kgᐳᐳ Dimensions Length 1.8 m , Width 1.8 m , Height 1.9 m Accessories and equipment:... more
5
St. Ingbert, Germany Germany
dealership location
18132 km
used
max. grinding diameter:200 mm Ptvbo3 grinding length:600 mm workpiece length:800 mm total power requirement:2,8 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1400 x 1300 x 1940 mm more
6
Brno, Czech Republic Czech Republic
17479 km
1972
good (used)
Table dimensions: 265 x 1250 mm Clamping surface: 250 x 1125 mm Longitudinal movement of table: 650 mm Lateral movement of table: 200 mm Vertical movement of table: 320 mm Max. distance from spindle axis to table: 340 mm Power: 6,1kW Machine dimensions: 1850 x 2500 mm 33vllpvv Machine weight: 2100 kg more
3
Kaiserslautern, Germany Germany
dealership location
18085 km
1999
ready for operation (used)
General Data Machine weight 4800 kg Control Unit Brand HEIDENHAIN Model TNC 410 Main Drive Spindle motor power 7.5 kW Movement X-Axis Movement 875 mm Y-Axis Movement 500 mm Z-Axis Movement 500 mm Table Outer length 900 mm Outer width 520 mm Table load 400 kg 8xihdsli Tools Type of tool holder SK 40 This HERMLE U 630 S Milling Machine from Germany was manufactured in 1999. This machine is equipped with a HEIDENHAIN TNC 410 Control unit and a manually swivelling vertical milling head. Appl... more
Electric motor, three-phase motor power 0,55 kW speed 1395 1/min shaft Ø 19 mm design B3 Protection type IP44 -2 x available Lzzmkbpv Price per piece Dimensions 280/165/H205 mm Weight 13 kg more
9
Langenfeld, Germany Germany
dealership location
18057 km
2015
used
x-travel 850 mm y-travel 700 mm z-travel 500 mm Control HEIDENHAIN TNC 640 turning speeds 18.000 U/min tool taper HSK 63 total power requirement - kW weight of the machine ca. 10,5 t dimensions of the machine ca. 2,7 x 2,2 x 2,9 m Nnevb more
3
Bühl, Germany Germany
dealership location
18088 km
1991
used
pressure 80 t chamfer lenght 1000 mm distance between columns 600 mm stroke 250 mm control CYBELEC DNC 34 PS-CM table length 1000 mm table width 280 mm column arm 320 mm Cdgu8xjq feed down 110 mm/sec feed up 100 mm/sec working feed 11 mm/sec oil volume 200 l total power requirement kW weight of the machine ca. 5 t Accessories: back gauge, table extensions, various prism bloc segments (2 x 150 mm long, 1 x 500 mm long) more
x-travel 800 mm y-travel 500 mm z-travel 500 mm Bfl7zsptme control Heidenhain TNC 430 surface area 800 x 500 mm Number of working hours 34600 h spindle hours 14900 h weight of the machine ca. 8 t dimensions of the machine ca. L 5 x B 3,5 x H 2,95 m The machine is in good condition. Supplied with a chip conveyor. The clamping devices are not included. A tour of the machine under power is possible by appointment. *** Changes and errors in the technical data and information as well Subject... more
Make brabender technologie, Type "sackschütte mit fw80 /3plus", No 03035306900, New 2004, Material Stainless steel, Metering screw , Screw diameter 80mm, Screw length 500mm +/-, Hopper sizes +/- 600x500mm x1000mm, Inlet dia. 210mm, Outlet dia. 160mm, With motor 0,55kW 230/400 Volt, with knocker, Hopper with flexible wall , Mounted on frame , Floorspace 1,6x0,7m, Total height 1,5m, Weight 180kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price comp... more
1
Babberich, Netherlands Netherlands
dealership location
18058 km
ready for operation (used)
Make Yop Bfj9epixz3 more
Gear motor, electric motor Bcag3pvc0h Power 0,6 kW protection IP22 Price per piece -2 x available Dimensions 340/260/H240 mm Weight 7.6 kg more
3
Tönisvorst, Germany Germany
dealership location
18073 km
used
power capacity 11,22 kW volt 460 V ampere 24 A Nllxf weight of the machine ca. 74, 158 kg 2 brandnew motors available. 1. UD 0801/1128322-001-1 2. UD 0712/70851527-2 details see photo of type plate. price for both motors. more
9
İstanbul, Turkey Turkey
16480 km
1985
good (used)
ZFWZ 800/10 WMW GEAR HOBBING MACHINE Bd2lmrmb3 more
control Heidenhain TNC 430 x-travel 800 mm y-travel 500 mm z-travel 500 mm surface area 800x500 mm Number of working hours 42335 h spindle hours 19630 h weight of the machine ca. 8 t dimensions of the machine ca. L 5 x B 3,5 x H 2,95 m The machine is in good condition. The scope of supply includes an oil mist suction, a chip conveyor a 4th B-axis and a replacement pump KKS included. Bekcbguxxu A tour of the machine under power is possible by appointment. Bfl7zi8nyd Further technical inform... more
6
CIFER, Slovakia Slovakia
dealership location
17428 km
1987
good (used)
Main drive - spindle motor at 2450 RPM power - 4,5 kW Spindle speed within four gears - infinitely variable Speed range 20-4000, tool holder horizontal and vertical ISO 40 TOOL CLAMPING hydromechanisch 1200 daN, vertical spindle stroke 80 mm FEED drive - single DC motors fur each axis 1-2000 mm / min Feed force in all axis 5400 N, rapid traverse in all axes 5 m / mon Workspace - along x axis 500 mm, Y-axis cross 360 mm, vertical Z axis 400 mm MEASUREMENT - measurement of X, Y, Z - dir... more
6
Brno - Slatina , Czech Republic Czech Republic
17472 km
2014
excellent (used)
Machining centre vertical C 60 U MT Producer: Hermle AG YP: 2014 Control Heidenhain ... TNC 640 Clamping table surface ... 1200mm Axis X ... 1200mm Axis Y ... 1300mm Axis Z ... 900mm Spindle speed ... 10-12000 / min. controlled axes ... 5 cooling... 80bar HSK-T100 Max. Workpiece weight ... 2500kg Bfp882s8br Magazine places ... 50 Rapid traverse ... 50m / min Machine weight ... 30000kg The machine is in good condition, possible to test under power. more
Lagernummer 1105-02752 Maschinenart Bearbeitungszentrum - Universal Fabrikat HERMLE Typ C 600 U Baujahr 2003 Steuerungsart CNC Lagerort FRANKREICH Ursprungsland Deutschland Lieferzeit AUF ANFRAGE Frachtbasis ab Standort Technische Details x-Weg 600 mm y-Weg 450 mm z-Weg 450 mm Steuerung TNC 530 Heidenhain Drehzahlbereich - Hauptspindel 16000 min/-1 Antriebsleistung - Hauptspindel 7 / 9 kW Werkzeugaufnahme HSK 63 Bfpatjzzlv Spindellagerdurchmesser 70 mm We... more
5
Tönisvorst, Germany Germany
dealership location
18073 km
1976
used
max. wheel diameter 1250 mm gear width 600 mm max. module 16 min. module 2 diameter of hob 240 mm turning speed range 28-200 U/min feeds - axial 0,28-8 mm/min feeds - radial 0,1 - 2 mm/min feeds - tangential 0,16 - 4 mm/min swivelling of milling head +/-45 Grad electrics - voltage/frequency 380/50 V/Hz total power requirement 25 kW weight of the machine ca. 16 t dimensions of the machine ca. 4,5 x 2,1 x 3,3 m Beveocda change gears chip conveyor milling arbors Machine is not ready for... more
Universal tool milling and boring machine Hermle UWF 900ECNC Heidenhain TNC 355x : 600 mmy : 400 mmz : 420 mmPinhole stroke vertical : 75 mmMain drive 20 - 4000 rpm. - 3 steps (stepless)Power at 100D : 5.9 kW Feeds stepless x/y/z : 1 - 5000 mm/min.Rapid traverse x/y/z : 7000/7000/6000 mm/min.Work spindles/ Tool holder : SK 40Vertical milling head /- 90° swiveling rigid angular table Table clamping surface : 900 x 458 mm (7 T-slots)Attachment kit measuring probe TNC355 direct measuring system x/y... more
7
Bad Oeynhausen, Germany Germany
17883 km
1995
unexamined (used)
Adhesive medium:Glue thread Stgxcs more
Water slot milling, water slot milling Three spindle Iw0qcnka8 -electro-pneumatic circuit pneumatic workpiece clamping-Feineinstellung spindles and hand wheels Weight 172 kg more
10
Brno - Slatina , Czech Republic Czech Republic
17472 km
2014
excellent (used)
Machining centre vertical C 50 U MT Producer: Hermle AG YP: 2014 Control Heidenhain ... TNC 640 Clamping table surface ... 1000mm Axis X ... 1000mm Bd0bvmynq Axis Y ... 1100mm Axis Z ... 750mm Spindle speed ... 10-12000 / min. controlled axes ... 5 cooling through spindle ... 80bar HSK-T100 Max. Workpiece weight ... 2000kg Magazine places ... 42 Machine weight ... 21500kg The machine is in very good condition, possible to test under power. more
Make Brabender Technologie, Type DDW-MD5-FW40 / 3plus-50, No 03035306899, New 2004, Material Stainless steel, Metering screw , Screw diameter dia. 40mm, Inlet dia. 195mm, DN200 WAREX DKZ 103, Outlet dia. 100mm, With motor 0,55 KW 230 Volt (Ex), Hopper with flexible wall , Mounted on frame , With switch , Floorspace 1,2x0,5 M, Total height 1,3 M, Weight 200kg, Extra Specifications ATEX II 1/2D T135 What you can expect from Foeth: all our machines are in working condition, and at a reduced price c... more
3
Krefeld, Germany Germany
dealership location
18060 km
1986
used
x-travel 400 mm y-travel 290 mm z-travel 380 mm table-size 700 x 285 mm control Heidenhain TNC 135 Beny8vkv0v tool adaptor ISO 40 turning speed range 40- 2.000 U/min rapid speed 1,5 m/min feed speeds 1500 mm/min power requirement 2.2 kW quill stroke 63 mm dimensions 2,4 x 2,6 x 1,7 m weight 1,3 t total power requirement kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,8 x1,8 x 1,8 m - hydraulic tool clamping - cooling system more
Veneer splicing machine Kuper FWJ 900, ready for use (second-hand), year of construction 1985, technical data: column projection 920mm feed approx. 15m/min. total connection value 0;45 KW space requirement approx. 1350 x 580 x 1600 mm (L-B-H)weight 185 kg machine number 2505 7770This is a private sale. Ycg3a8y more

New machines via email!

Yes, send news from this list to my inbox!
Stay updated!
You can create a label.
How often do you want to be notified about new listings?
HERMLE FW 801
SELL IMMEDIATELY

with the worldwide market leader from 0,99 EUR per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately

Machineseeker.nz is official sponsor of:
Flag gb
+44 (0) 20 806 810 84
Flag de
+49 (0) 201 857 86 10
Flag nl
+49 (0) 201 857 86 180
Flag pl
+48 (0) 223 076 958
Flag it
+39 800 12 58 38
Flag es
+34 911 433 456
Flag fr
+33 9 80 09 19 36
Flag us
+1 312 94 04 581