Used Hermle C 40 U for sale (114)

Condition: excellent (used), Year of construction: 2015, operating hours: 22,387 h, Manufacturer: Hermle | Type: C 400 U | Serial number: 23589 | Year of manufacture: 2015 | Operating hours: approx. 8939 | Control system: Heidenhain TNC 530; Travel ranges (X/Y/Z): 850 / 700 / 500 mm; Swivel/rotating table: Ø 630 mm, integrated, C- and B-axis. Tool magazine: 38 positions; Spindle speed: up to 18,000 rpm; Drive power: approx. 20 kW; Machine weight: approx. 8,000 kg; Cooling system: Knoll 850 K-1 with high-pressure unit; Coolant system; Central filter with return conveyor and heat exchanger; NC swivel rotary table; The operating hours refer to spindle operation. | Dimensions: approx. 4000 mm x 3400 mm x 2700 mm (W x H x L) | Approx. 10,500 kg | The specified dimensions are approximate values. All other information is provided without guarantee. | Grey | Steel Category: Machines and technical equipment Nsdszq Dkxopfx Ahkjwk

Condition: used, Year of construction: 2012, x-travel 850 mm y-travel 700 mm z-travel 500 mm Control Siemens 840 D rotary table 800 mm c-axis 0.001º ( ±360º) 0 Nwedpfjyxy E Rsx Ahksk B-axis (table) º mm number of spindle speeds 18.000 U/min/rpm tool taper HSK 63 Tools changer 38 fach/tools Internal cooling system 80 bar total power requirement 43 kVA weight of the machine ca. 10,6 t Equipment- Paper belt filter – 200 l tank- Active control cabinet cooling- Infrared probe M&H (Heidenhain)- Laser tool measuring system Blum- Chip conveyor- Cleaning pistol with pump 2 bar / 40 l min- 3D Quick Set- Electronic handwheel

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Nwjdpfezv Syfjx Ahkek Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: good (used), Year of construction: 2010, 2010 Hermle C50 U MT Dynamic 5 Axis Vertical Machining Centre With Turning Capability & Dual Siemens 840D Controls Table Dimension Ø1,000mm (16 16mm H7 'T' Slots). Maximum Table Load 2,000kg (1,000kg Turning). Maximum Component Dimension Ø1,000 x 810mm High. Axis Travel 'X'=1,000mm, 'Y'=1,100mm, 'Z'=750mm , 'A'=+100°/-130°, 'C'=360°. Rapid Traverse 'X'60m/min, 'Y'=60m/min, 'Z'=65m/min. Maximum Spindle Speed 12,000rpm (56kW Motor). Maximum Turning Spindle Speed 500rpm. Spindle Taper HSK A100. 84 Position ATC (Additional ZM 42 Magazine). Maximum Tool Ø250mm, Maximum Tool Length 430mm, Maximum Tool Weight 30kg. Chip To Chip Tool Change Time 7s. S/No. 19871 (2010). Machine Hours 89,860.9 , Drive Hours = 74,916.2, Spindle Hours 10,585.7, Work Spindle Hours 566.0 (New Spindle Installed 2023). Nedpfxjzt Nyws Ahkswk With Knoll KF 400 Through Coolant Paper Filtration System, Knoll S-1 Chip Conveyor, Swarf Bin, Handte Mist Extraction Unit, Hyfra Pedia VWK70-DE-S Chiller Unit, Brand New Blum Laser Toolsetter, Quantity Of Tooling In ATC, Renishaw MP40-2 Spindle Probe, Visiport TK2 Spin Window, Blum Reference Tool In Carry Case, Heidenhain Calibration Kit In Carry Case, Automatic Doors, Retractable roof For Loading & Technical Manuals. Weight 21,500kg. Technical Agreement/Specifications Are Located In A Folder Inside Control Panel. Machine Is A Clean & Very Good Condition, Only Issues Are Internal Lights Not Working (No Faults As They Were Repaired Last Month Through Kingsbury). We Run Fusion 360 Through The Machine.

Condition: good (used), Year of construction: 2007, Year of manufacture: 2007 Spindle hours approx. 14,000 (replaced 11/2017) Drive operating hours approx. 68,500 Traverse paths: 850x700x500 mm Rapid traverse: 45 m/min Speed: 18,000 rpm HSK 63 Tool changer with 38 stations Laser tool measurement/breakage monitoring NC tilting rotary table D=420 mm Control: Siemens 840D Internal coolant supply 80 bar Paper band filter Chip conveyor Njdpfx Asy Er Ukshkowk Electronic handwheel module Oil mist extraction Chip flushing gun Thermal compensation Heidenhain probing system

Condition: used, Year of construction: 2007, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U Nwsdpfx Ahjzaf Hujkok

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, maximum workpiece height 355mm, Nwjdezghngjpfx Ahkjk Maximum table load 300Kg, A axis -/+ 115 degrees, spindle taper HSK 63, spindle speed 15,000rpm, 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant.

Condition: excellent (used), HERMLE C 42 U is a 2 x 5‑axis machining centres with loading robot, engineered for high precision and reliability. Table 400×400 mm, table load 450 kg, travels X800 Y800 Z550 mm, A ±130°. Spindle HSK‑A63 0–18,000 rpm, 42 kW, 148 Nm; rapid 45/45/40 m/min. Tool magazines 42+160, 54 pallets, KUKA robot, coolant 80 bar, Renishaw/BLUM. Suited for tight tolerances in automotive, aerospace, watchmaking, medical. Nedpfeyxn Dnjx Ahkowk

Condition: used, Year of construction: 2004, x-travel 650 mm y-travel 600 mm z-travel 500 mm control Sinumerik 840 D pl Siemens turning speed range - main spindle 20 - 28.000 min/-1 power capacity - main spindel 23 / 18 kW max. Torque 79 Nm tool taper HSK-A63 table surface area Ø 630 mm Swivel range A: +30° / -115 ° rotatable C: 360 ° max. table load 500 kg max. workpiece sizes Ø 630 x 313 mm table speed A:25 / C:65 min/-1 number of toolpositions 117 pos. max. tool diameter 90 (125) mm max. tool length 300 mm rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8,5 kN total power requirement 43 kVA weight of the machine ca. 10,5 t dimensions of the machine ca. 6,5 x 4,5 x 3,0 m 5 Axis CNC - Machining Center Universal HERMLE - C 30 U Dynamic Nwjdpfx Ahozd E Tbekjk - Tool-Magazine 117 pos. - ca. 9.000h Spindle-hrs. after change - OPTIONALLY available with a pallet changer (extra cost)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,167 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 500 mm Spindle speed: 18,000 rpm Tool holder: HSK-A63 Table type: NC-SRT 420 mm Table specification: Pallet clamping system Pallet changer: PW160, 400 x 400 mm MACHINE DETAILS Control: Heidenhain iTNC 530 Internal coolant supply: 80 bar Frequency: 50 Hz Operating hours: 27,167 h EQUIPMENT - Heidenhain DNC - DXF import - Kinematic Opt iTNC - Automatic cabin door - Additional magazine: ZM43 - Linear guides: Dynamic version - Rotary table axis: A-axis (not centered) - Manual cabin roof - Laminated safety glass window - Pallet storage - External MQL (minimum quantity lubrication) Nwsdpfx Aheyzyttjkek - Tool breakage monitoring A2 Blum - Heidenhain touch probe - Preparation for additional touch probe - Event Messenger - Tool identification HSK - Machine license TCS-Soflex - Electronic thermal compensation - Electronic hand control module - Oil mist extraction (prepared & with after-filter) - Flange for oil mist extraction - Sealing air for measuring units - Chip flushing pistol - Machine bed flushing - Internal & external air blast - Signal light - Coolant filter type: Paper band filter for coolant system - Scraper belt conveyor - Test protocol: C 40 iTNC 530 PW160

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² Nwedozwv N Tjpfx Ahkjk - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2009, travel -x axis 600 mm travel -y axis 450 mm travel -z axis 450 mm control HEIDENHAIN - TNC 530 number of spindle speeds 18.000 U/min tool taper HSK-A63 numbers of positions in the tool changer 120 5-axis simultaneous machining center | HERMLE - C 20 U equipped with ITC (80 bar), NC swivel rotary table, 120-way tool changer & pallet changer. The machine is in a well-maintained condition. Nwodjyy A N Uopfx Ahkjk The machine videos from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 20 | C20 | C-20 | C20U

Condition: good (used), Year of construction: 2015, C 22 U + IH 30 handling system + ZM 192 additional magazine Machine parameters: Nsdpfx Ahoy Rgfzjkowk Travel in X, Y, Z axes: 450, 600, 330 mm Max. spindle speed: 18000 HSK-A63 rpm Description: The machine is in good technical condition, test operation is possible by prior arrangement. Equipped with Hardware KinematicOpt, centre cooling 80 bar, BLUM LC 50 TL200, Renishaw TNC 640. Original price was approx. €570,000. Comprehensive specification of supplied components and options available – will be provided upon request.

Condition: excellent (used), Year of construction: 1998, x-travel 800 mm y-travel 600 mm z-travel 500 mm Nwjdpox Dndcsfx Ahkok

Condition: ready for operation (used), Year of construction: 2003, Make: HERMLE Type of machine: C 800 U Year of manufacture: 2003 Control system: Siemens 840D Machine's weight: 9.000,- Tool holder: SK40 Nodotmtxmepfx Ahkswk x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 16.000 min-1 Number of tools in the magazine: 80 Pl.

Condition: used, Year of construction: 1988, Tool CNC Milling Machine HERMLE type UWF 1000 CNC Year of construction: 1988 Travel X: 700 mm Travel Y: 550 mm Travel Z: 500 mm Numerical Command: HEIDENHAIN TNC 155 Spindle ISO 40 Spindle: Ø 70 mm Spindle speed: from 25 to 3150 RPM Table size: 1000 x 500 mm Njdpfszm Sphsx Ahkowk Vertical sleeve travel: 100 mm Swivel head Spindle motor: 6,9 kW Weight: 3,3 T

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control Nwsdpfxjygx Hne Ahkek - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: excellent (used), Year of construction: 2015, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, overall weight: 12,500 kg, We offer in perfect condition Hermle C42U Dynamic with Heidenhain 640 control. Machine has 12.000 spindle hours. X-Axis travel: 800 mm Y-Axis travel: 800 mm Z-Axis travel: 550 mm Dynamic package torque axis, table Ø440 with secondary claming plates 920 x 490 mm Spindle: HSK-A63 18.000 RPM Nwsdpfx Ahjzpfg Eskok Machine will be in stock in 2 weeks

Year of construction: 2002, condition: excellent (used), HERMLE C 800 U CNC machining center Accessories incl.: among others: 3D touch probe, tool holder set, various clamping devices, chip tray, hydr. aggregate, double back-up Nwedsmqk E Tepfx Ahkok Technical Data speed: 0- 18`000 rpm spindle nose: HSK-A63 Feeding speed: 1-35 m/min feed force: 8000 N X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm dimensions of the machine: 2700 x 2210 x 2930 mm Weight: 8500 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: good (used), Year of construction: 2004, operating hours: 38,930 h, functionality: fully functional, machine/vehicle number: 16495, spindle speed (max.): 18,000 rpm, Make: HERMLE Type: C600U Control: HeidenHain iTNC 530 Year: 2004 X - Travel 600 mm Y - Travel 450 mm Z - Travel 400 mm A - Axis 110 ° Nwjdpfxjzwt Hpj Ahkjk B - Axis 360 ° Table Ø 280 mm Feed rate X-Axis 35000 mm/min. Feed rate Y-Axis 35000 mm/min. Feed rate Z-Axis 35000 mm/min. Feed rate A-Axis 10 Degrees/min Feed rate B-Axis 15 Degrees/min Spindle Taper 40 ISO/Bt/Mk Power on spindle 15 kW Speeds / ranges 18000 Rpm ATC / revolver 30 Chip conveyor No

Condition: excellent (used), functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 550 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, HERMLE UWF 1001 CNC milling machine With CNC control, HEIDENHAIN / Type: TNC 155 Measuring probe / Coolant system / Chip conveyor Enclosure / Cabin / Control cabinet: 1260 x 500 x 1700 mm Travel paths: 700 x 550 x 550 mm / Clamping table area: 1000 x 490 mm Nwodpfx Ahozcmz Eskek

Condition: good (used), Year of construction: 2005, operating hours: 108,310 h, functionality: fully functional, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Year of manufacture: 2005 Heidenhain iTNC 530 Machine ON: 108,310 h, Spindle ON: 34,700 h Njdpfsyhv Eqsx Ahkewk - Milling head manual swivel/clamp - Main spindle 18,000 rpm - SK 40 - 16 tool positions - Rotary/angle table - Standard coolant system - Chip tray - Observation windows - German documentation - Heidenhain measuring probe - Electronic hand control module - Chip flushing gun - Air blow-off device - Central blow air - U 740 with fixed table

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. The machine comes as standard including: Nwodpfx Ahexgukbekjk - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe - Spindle and emulsion cooler - Lockable roof (harmonica style) The machine can be inspected under power by appointment.

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 330 mm z-travel 350 mm total power requirement 6,3 kW Nsdpfx Aet Hxbwehkewk weight of the machine ca. 2 t dimensions of the machine ca. 736 m

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Nedpfx Aheinh Rqjkjwk Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis