Used Hermle U 740 for sale (123)

Condition: used, Year of construction: 2007, x-travel 740 (915) mm y-travel 500 mm z-travel 500 mm Control Heidenhain iTNC 530 turning speeds 20-12.000 U/min Lasdszkl Ekepfx Afted feed 0-15.000 mm/min tool change unit 16-fach rapid power traverse in X-and Z direction 30/20 m/min tool taper SK 40 table surface area 900 x 528 mm max. table load 700 kg spindle hours 8.961 h total power requirement 32,5/17,5 kW weight of the machine ca. 7,3 t dimensions of the machine ca. 2,8 x 2,4 x 2,4 m Machining Center HERMLE U 740, built in 2007 Accessories: Tool holders, see pictures

Condition: good (used), Year of construction: 2006, Vertical machining center Machine type: Hermle U 740 Control: Heidenhain iTNC 530 Year: 2006 SPECIFICATIONS Travel X-Axis: 740 (915) mm Y-Axis: 500 mm Z-Axis: 500 mm Rapid motion: (X/Y/Z): 30 / 30 / 20 m/min. Spindle speeds: 12.000 rpm Spindle power: 32,5 / 17,5 kW Torque: 200/108 Nm Tool: SK 40 Toolchanger Tool capacity: 16 Table size: 900 x 500 mm Max. Table Load: 700 kg Machine weight: 7300 kg Equipment Cooling tank: 200 l Chip tray Ljdpfx Asziy Nzsftsad Caliper: TS 640 Electronical handwheel Chip conveyor Chip rinsing pistol

Condition: ready for operation (used), Year of construction: 2003, operating hours: 27,804 h, functionality: fully functional, machine/vehicle number: 16165, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 915 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Number of axes: 5 Maximum spindle speed: 12,000 rpm Table length: 900 mm Table width: 500 mm Number of T-slots: 8 T-slot spacing: 65 mm Ljdoyhnudjpfx Aftoad T-slot width: 14 mm Maximum workpiece weight on table: 700 kg Maximum workpiece length: 900 mm Maximum workpiece width: 500 mm Maximum workpiece height: 500 mm Number of tools: 16 Maximum tool diameter: 125 mm Diameter with adjacent pockets empty: 180 mm Maximum tool length: 300 mm Maximum tool weight: 6 kg Tool holder: SK 40 Milling head swiveling range: -5° to +95° Rapid traverse: Longitudinal: 30 m/min Cross: 30 m/min Vertical: 20 m/min MACHINE SPECIFICATIONS Compressed air connection: 6 bar Electrical connection: 50 Hz, 3 x 400 Volt Spindle drive power: 32 kW Total power requirement: 26 kVA Noise level: 78 dB (A) Dimensions & Weight Dimensions (L x W x H): 2,760 x 2,390 x 2,370 mm Machine weight: approx. 7,300 kg Operating Hours Power-on time: 86,672 h Operating time: 34,362 h Spindle run time: 27,804 h EQUIPMENT 3-jaw chuck Ø 200 mm Workpiece probe HEIDENHAIN TS 640 Rotary table 4th axis HOFMANN type RW/NC-160 Rinsing gun RS 232 interface Ethernet interface Electrical cabinet air conditioning unit

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE Lsdpfsup Hw Esx Aftead - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 48894 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Year of construction: 2004, condition: excellent (used), used machining center Brand: Hermle Model: U740 Ledjktkdbjpfx Aftoad Year: 2004 Serial No.: 16716 Weight: 7300kg Power: 26KVA CNC: Heidenhain iTNC 530 Type: 4 + 1 axis (Spirsin model 8117CF/225) 16 tool charger. General technical data: Fast forwards: - X axis: 30m/min. - Y axis: 30m/min. - Z axis: 20m/min. - Axis B: 15 rpm. Tours: - X axis: 915mm / 895 to 915mm (Tool holder head -5º to 90º / Tool holder head > 50º to 95º) - Y axis: 500mm (In all positions of the tool holder head) - Z axis: 500mm / 470mm (Tool holder head 90º-95º) Positioning precision in the 3 axes 0.010mm (Temperature at 20º) Maximum load on table: 700kg Table measures: 900x500mm Spindle rpm: 12,000rpm Hollow Shaft Water Cooled Spindle Motor Milling head with automatic degree rotation from -5º to +95º sk 40 tool clamping system 16 tool magazine - Maximum tool diameter: 80mm - In case of adjacent free posts maximum tool diameter 100mm - Maximum tool length: 250mm - Maximum tool weight 6kg Cooling system by coolant with a 210L tank and a flow rate of 30Ltrs./min. It has an electronic control for manual handling of the machine. Chip collector: - Brand: BMF - Model: SPE 63/12-300 Z600 - Year: 2004

Condition: good (used), Year of construction: 2005, operating hours: 108,310 h, functionality: fully functional, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Year of manufacture: 2005 Heidenhain iTNC 530 Machine ON: 108,310 h, Spindle ON: 34,700 h - Milling head manual swivel/clamp - Main spindle 18,000 rpm - SK 40 - 16 tool positions - Rotary/angle table - Standard coolant system - Chip tray Ljdpfxsyhv Eqe Aftjad - Observation windows - German documentation - Heidenhain measuring probe - Electronic hand control module - Chip flushing gun - Air blow-off device - Central blow air - U 740 with fixed table

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller manufacturer: Heidenhain, table width: 480 mm, table length: 900 mm, overall weight: 7,300 kg, Equipment: documentation/manual, TECHNICAL DETAILS Fixed table: 900 x 480 mm Ledpfxjxl Suns Aftead MACHINE DETAILS Control: HEIDENHAIN Electrical Data Net weight: 7,300 kg Operating voltage: 400 V / 3~ Mains frequency: 50 Hz Control voltage: 24 V Total power: 26 kVA Total rated current: 37 A Weight: 6,300 kg EQUIPMENT Tool changer

Condition: used, Year of construction: 2010, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2010 Ljdjzng Hwopfx Aftoad Control : Heidenhain iTNC 530 Speed : 15000 rpm Movement X/Y/Z : 800/600/500 mm Tool holder : SK 40 Spindle: Technology:Motorspindle Speed:15.000 rpm Power (max.):15 kW Torque (max.):130 Nm Taper:SK 40 NC-Swivelroundtable: Technology:Swivelroundtable with Clamping plates A-Axis:-/+ 110° C-Axis:360° Clampingsurface:ø280 mm Tableloading (max.):250 kg In general: Toolmagazine:30 Stations Rapid travers in X/Y/Z:30 m/min Equipment/Accessory: Positionsensor:Direct Scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 bar Workpiecemeasurement:Touch probe, Renishaw OMP 40 Oilmistseparation:Mechanical extraction, Handte OE-DAH Setup operations:Electronic Handwheel Kinematicmeasuring:KinematicOpt Toolholder:Misc. used toolholder SK40 Further Equipment:Rinsing pistol

Condition: used, Year of construction: 2000, controller manufacturer: Heidenhain, controller model: TNC 430, _____ Description: Year of manuf. : 2000 Control : Heidenhain TNC 430 Speed : 16000 rpm Movement X/Y/Z : 800/600/500 mm Tool holder : SK 40 Spindle: Technology:Motorspindle Speed:16.000 rpm Power (ca.):15 kW Torque (ca.):130 Nm Taper:SK 40 Laedpszng Hqjfx Aftsd NC-Swievelroundtable: Technology:Swivelroundtable with Clamping plates A-Axis:+/- 110° C-Axis:360° Clampingsurface:ø280 mm Tableloading (max.):250 kg In general: Toolmagazine:30 stations Rapid travers in X/Y/Z:35 m/min Equipment/Accessory: Positionsensor:Direct in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling with Highpressure Workpiecemeasurement:Touchprobe, Renishaw OMP 60 Workpiececlamping:Zeroclampsystem, Stark Toolbreakagecontrol:Laser, Renishaw TRS1 Oilmistseparation:Mechanical extraction, Handte OE-DAH Setup operations:Electronic handwheel Toolholder:Misc. used toolholder SK40 Further Equipment:Rinsing pistol Further Accessory:Misc. used clampingrails with jaws, HEMO

Condition: used, Year of construction: 2011, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 18.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The machine has only 13.924 H spindle hours. The machine is in a well-maintained condition. Lajdpfezczhaox Aftsd Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: used, Year of construction: 2007, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min Lodpjzaf Husfx Aftoad NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: excellent (used), Year of construction: 1998, x-travel 800 mm y-travel 600 mm z-travel 500 mm Ljdpfxjx Dndcs Aftsad

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 700 mm, Vertical machining center Manufacturer: Hermle Type: C 50 U Machine No.: 19670 Year of manufacture: 2009 Control system: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travel distances X: 1000 mm Y: 1100 mm Z: 700 mm Tool changer: 60 positions + 41 (HSK 63) Spindle speed: 18,000 rpm Weight approx.: 21,500 kg - NC rotary table Ø 1150x900 mm - Chip conveyor - Compressed air supply through spindle center - Automatic enclosure roof - Electrical thermal compensation ITNC - IKZ 80 bar paper band filter Lsdpfszl Ahlsx Aftoad - Heidenhain measuring probe - Blum tool breakage detection/measurement Milling spindle replaced after 1900 operating hours, new Y-axis replaced after 1900 operating hours, new Subject to errors and prior sale.

Condition: good (used), Year of construction: 2001, Vertical machining center Machine type: Hermle U 630 T Control: Heidenhain TNC 426 Year: 2001 SPECIFICATIONS Travel X-Axis: 875 mm Y-Axis: 500 mm Z-Axis: 500 mm Panning head: 90° quill range: 75 mm Spindle speeds: 7.000 rpm Laodpfsziy Nuox Aftjd Tool: SK 40 Tool capacity: 16 Table size: 900 x 528 mm Equipment

Condition: used, Year of construction: 1999, x-travel 630 (875) mm Lodpfx Afszh N T Hjtead y-travel 500 mm z-travel 500 mm Control Heidenhain TNC 430 turning speeds 20-7.000 U/min feed 0-15.000 mm/min tool change unit 16-fach rapid power traverse in X-and Z direction 15 m/min tool taper SK 40 table surface area 900 x 528 mm max. table load 400 kg spindle diameter in front bearing 55 mm swivellable 0-90 ° quill stroke 75 mm spindle hours 9.546 h total power requirement 12/7,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 4 x 3,6 x 2,2 m HERMLE U 630T 3-axis machining centre, built in 1999 The X-axis, with a stroke of 630 mm, can be extended to 875 mm by swivelling the tool changer out of the way. Accessories: Tool holders, see pictures

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, maximum workpiece height 355mm, Maximum table load 300Kg, A axis -/+ 115 degrees, spindle taper HSK 63, spindle speed 15,000rpm, Laedpfjzghngsx Afted 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant.

Condition: good (used), Year of construction: 2011, Control system: Siemens 840 D pl X-axis 650 mm – Y-axis 600 mm – Z-axis 500 mm A-axis +- 115° - C-axis 360° Spindle 18,000 rpm, power 13 / 10 kW, tool holder HSK-A63 Tool changer 32 tool positions - additional magazine 87 positions Lsdpfx Aozint Ieftoad NC rotary table ø280 PW160 with pallet clamping system, automatic cabinet doors, hydraulic and pneumatic extension, pallet changer PW 160-400x400 mm, pallet storage system control 3D tool radius correction, A-axis standard version, A-axis position offset Internal coolant supply 80 bar, includes: KNOLL paper band filter, KNOLL chip conveyor, standard coolant system, clean air supply for measuring probes, machine bed flushing, scraper conveyor Air blast through the spindle center, manual cabinet roof, laminated safety glass, rotating clear window, electric thermal compensation, electric manual control module, measuring probe Renishaw incl. BLUM tool breakage/measurement, chip flushing gun 7 pallets 400/STM190 with thread drilling grid Oil mist extraction system LTA, technical documentation (German) Total spindle hours: 18,667 h, new spindle in 2025 at 16,560 h.

Condition: used, Year of construction: 2007, operating hours: 33,122 h, Hermle simultaneous 5-axis CNC machining center Type/Model: U 1130 Condition: Used Laedpfx Afozfg U Notjd Year of manufacture: 2007 Operating hours: 33,122 h Spindle hours: 12,054 h Technical data: Travel range X/Y/Z: 1130 (1300) mm x 720 mm x 630 mm Feed rate: Manual / setup mode: 1 - 2000 mm/min Programmable X-Y axis: 1 - 30000 mm/min Programmable Z axis: 1 - 20000 mm/min Rotary table: Tool interface: SK 40 Total connected load: 32 kW Space requirement (L/W/H) approx.: 3.66 m x 4.38 m x 2.57 m Weight approx.: approx. 10 tons Equipment: - Heidenhain iTNC 530 control system - Heidenhain TS 640 infrared measuring probe - 16-position tool changer - incl. SK 40 tool interface plus various tools - Machine vise - IKZ (internal coolant supply) - Paper band filter - Oil cooler - Chip conveyor - Control cabinet air conditioning - RS 232 interface - LAN interface Costs for delivery by freight forwarder to the curb, see shopping cart or individual offer for inquiry items.

Condition: used, Year of construction: 2004, x-travel 650 mm y-travel 600 mm z-travel 500 mm control Sinumerik 840 D pl Siemens turning speed range - main spindle 20 - 28.000 min/-1 power capacity - main spindel 23 / 18 kW max. Torque 79 Nm tool taper HSK-A63 table surface area Ø 630 mm Swivel range A: +30° / -115 ° rotatable C: 360 ° max. table load 500 kg max. workpiece sizes Ø 630 x 313 mm table speed A:25 / C:65 min/-1 number of toolpositions 117 pos. Lodpfjzd E Tbjx Aftead max. tool diameter 90 (125) mm max. tool length 300 mm rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8,5 kN total power requirement 43 kVA weight of the machine ca. 10,5 t dimensions of the machine ca. 6,5 x 4,5 x 3,0 m 5 Axis CNC - Machining Center Universal HERMLE - C 30 U Dynamic - Tool-Magazine 117 pos. - ca. 9.000h Spindle-hrs. after change - OPTIONALLY available with a pallet changer (extra cost)

Condition: used, Year of construction: 2009, travel -x axis 600 mm travel -y axis 450 mm travel -z axis 450 mm control HEIDENHAIN - TNC 530 number of spindle speeds 18.000 U/min tool taper HSK-A63 numbers of positions in the tool changer 120 5-axis simultaneous machining center | HERMLE - C 20 U equipped with ITC (80 bar), NC swivel rotary table, 120-way tool changer & pallet changer. The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. Laedpfjyy A N Uox Afted Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 20 | C20 | C-20 | C20U

Condition: used, Year of construction: 1997, Hermle 3-axis universal CNC milling machine Type/Model U 630 T Condition: Used Year of manufacture: 1997 Technical data: Ledpfxozdf Hps Aftead Tool holder: SK 40 Tool changer: 16-position Travel distances X/Y/Z: 630 mm x 500 mm x 500 mm Spindle speed range: max. 7000 rpm Quill stroke: 75 mm Work table Clamping surface: 900 x 528 mm Max. load: 400 kg Total connected load: 14 kW Control system: Heidenhain TNC 430 Dimensions L/W/H approx. 2.30 m x 2.10 m x 2.10 m Weight approx. 4,800 kg Equipment: - Drilling quill - 3 + 1 axis, swiveling head - Machine vise - 16-position tool holder including tools

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 7,000 rpm, travel distance X-axis: 630 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 415, number of axes: 3, This 3-axis HERMLE U 630 T was manufactured in 1999. It features a Heidenhain TNC 415 control system, ensuring precision and reliability in operation. The machine is in very good condition and fully operational. If you are looking to get high-quality milling capabilities, consider the HERMLE U 630 T universal milling machine we have for sale. Contact us for further details. • Machine Type: Universal Milling Machine Lajdpfxozbu I De Aftsd • Condition: Very good / Fully operational • Control System: Heidenhain TNC 415

Year of construction: 2002, condition: excellent (used), HERMLE C 800 U CNC machining center Accessories incl.: among others: 3D touch probe, tool holder set, various clamping devices, chip tray, hydr. aggregate, double back-up Technical Data speed: 0- 18`000 rpm spindle nose: HSK-A63 Feeding speed: 1-35 m/min feed force: 8000 N X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm dimensions of the machine: 2700 x 2210 x 2930 mm Ljdpfx Asmqk E Teftjad Weight: 8500 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,572 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, table width: 528 mm, table length: 900 mm, table load: 400 kg, overall weight: 4,800 kg, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 40, number of axes: 3, This 3-axis HERMLE U 630 T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a table size of 900 x 528 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE U 630 T vertical machining centre we have for sale. Contact us for further details. • Table dimensions: 900 x 528 mm • Tool changer capacity: 16 stations • Working hours (from display): • Control on (Steuerung ein): 68,311 h • Machine on (Maschine ein): 65,234 h Lsdsy H Irbjpfx Aftead • Program run (Programmlauf): 13,572 h Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 1997, machine/vehicle number: 11968, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, Used HERMLE universal milling machine model U 630 S, year of manufacture 1997, equipped with Heidenhain TNC 410 control and full safety enclosure. Travels: X = 630 mm, Y = 500 mm, Z = 500 mm Table size: 900 x 528 mm, 7x T-slots 14 mm, spindle taper SK40 DIN 69871 Speeds: Gear stage 1 = 20–1,428.6 rpm, gear stage 2 = 1,428.6–7,000 rpm. Separate coolant tank 120 litres, Heidenhain electronic handwheel HS410, Heidenhain measuring probe TS 220 Includes mobile tool trolley for SK40 tool holders with approx. 80 tool holders included. Ljdjygwz Repfx Aftoad The machine is located at our premises in 71334 Waiblingen-Beinstein and can be inspected by appointment.