Used Hermle C 800 V for sale (124)

Condition: used, Year of construction: 1998, controller manufacturer: Heidenhain, controller model: TNC 430, _____ Description: Year of manuf. : 1998 Control : Heidenhain TNC 430 Speed : 15000 rpm Movement X/Y/Z : 800/600/500 mm Tool holder : SK 40 Spindle: Technology:Motorspindle Speed:15.000 rpm Power (ca.):15 kW Torque (ca.):130 Nm Taper:SK 40 Workingtable: Clampingsurface:1.000 x 560 mm In general: Toolmagazine:30 stations Rapid travers in X/Y/Z:35 m/min Equipment/Accessory: Positionsensor:Direct in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump Workpiecemeasurement:Touchprobe, Renishaw OMP 60 Toolbreakagecontrol:Laser, Renishaw TRS1 Oilmistseparation:Mechanical extraction, Handte OE-DAH Ksdpezng Hdsfx Ap Aolw Setup operations:Electronic handwheel Toolholder:Misc. used toolholder SK40 Further Equipment:Rinsing pistol

Condition: ready for operation (used), Year of construction: 2002, operating hours: 35,816 h, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 16,800 W, number of axes: 3, This 3-axis HERMLE C 800 V was manufactured in 2002. It features a spindle speed range of 20 to 10,000 rpm and a spindle power of 25 kW. The machine has a net weight of 7,000 kg and includes additional equipment such as a cooling unit and a jib crane. If you are looking to get high-quality machining capabilities, consider the HERMLE C 800 V vertical machining centre we have for sale. Contact us for further details. Kjdpfx Apszcylqo Aelw - Control Unit: Heidenhain (Control On: 114,325 hours)- Machine On Time: 111,736 hours- Program Run Time: 40,346 hours- Spindle On Time: 35,816 hours- Drive On Time: 76,783 hours- Axes In Motion: 37,963 hours- Operation Voltage: 400 V / 3 ~- Frequency: 50 Hz- Control Voltage: 24 V =- Total Nominal Current: 63 A- Total Rating: 43 KVA- Spindle Speed Range: 20 to 10,000 rpm- Spindle Diameter at Front Bearing: 70 mm- Tool Taper/Spindle Interface Options: HSK A63 (DIN 69063)- Tool Clamping Retention Force (HSK A63): 18 kN- Spindle Power (40% / 100% ED): 25 / 16.8 kW- Spindle Torque (40% / 100% ED): 159 / 107 Nm- Maximum Spindle Speed with Open Guard Doors: 3,000 rpm- Additional Equipment Included:* Cooling Unit / Chiller (FLKS 170)

Condition: excellent (used), Year of construction: 1996, x-travel 800 mm y-travel 600 mm Kedpfoy Tyznsx Ap Ajlw z-travel 500 mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Manufacturer: HERMLE Model: C 800 V Machine Type: CNC Vertical Machining Center Year of Manufacture: 2002 Control System: Siemens SINUMERIK Configuration: 3-Axis Machining Center Location: France Condition: excellent, can be demonstrated while powered on Origin: technical university / training and research environment Technical Data: Travel Ranges: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle: Tool Interface: HSK-A 63 Max. Spindle Speed: 16,000 rpm Max. Spindle Power: 15 kW Max. Torque: 130 Nm Internal Cooling / Coolant Through Spindle: 40 bar Axes / Feed Rates: Max. Axis Speed: 35 m/min Acceleration: 5 m/s² Tool Changer: Tool Magazine: 30 positions Tool System: HSK-A 63 Equipment: Siemens SINUMERIK CNC control system HERMLE control panel 3-axis configuration Vertical milling spindle HSK-A63 spindle 16,000 rpm spindle speed Internal cooling / High-pressure cooling through the spindle, 40 bar 30-position tool magazine Enclosed work area Fixed machine table with T-slots Machine light Coolant system / Pump unit available External high-pressure pump visible Renishaw system / Measuring probe system visible Ksdpfxjzd Sr Rs Ap Aelw Electronic hand-held device / Handwheel Control cabinet integrated Extraction / Exhaust connection visible Machine vise visible in photos, scope of delivery to be agreed Manuals / technical documentation available Description: For sale is a HERMLE C 800 V CNC vertical machining center, manufactured in 2002, with a Siemens SINUMERIK control system. The machine comes from a technical university or training and research environment in France. It is therefore not a conventional production machine from heavy series production, but a machine from a technically well-maintained environment. The HERMLE C 800 V is a very stable and high-quality 3-axis milling machine with a large working area, HSK-A63 spindle, 16,000 rpm, 30-position tool magazine, and internal cooling / high-pressure cooling through the spindle at 40 bar. The following combination is particularly noteworthy: * HERMLE machine construction quality * Siemens SINUMERIK control system * HSK-A63 tool interface * 16,000 rpm spindle * Internal cooling / High-pressure cooling 40 bar * 30-position tool magazine * Renishaw measuring system visible * Origin from a technical university environment The machine is very well suited for toolmaking, mold making, prototype construction, training, research, single-part production, and precise general CNC milling operations. The machine is currently set up and can be inspected or demonstrated while powered on, by arrangement. Note on peripherals: According to the current photographic documentation, a coolant / pump unit and an external high-pressure pump are available. A large separate KNOLL chip conveyor, KNOLL paper band filter, or a large central KSS filter system is not available. The exact scope of delivery of peripherals, accessories, clamping devices, tool holders, measuring probes, and documentation will be finalized before the sale. Sold as a used machine, as is, without warranty. Technical specifications are subject to change without notice. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, overall weight: 7,000 kg, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Hermle C 800 V vertical machining center was manufactured in 1996. It offers robust construction and precision for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 V machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Operating voltage: 400 v / 3-phase / 50 hz Kedpfx Apeyarzro Aolw • Control voltage: 24 v • Total current: 44 a • Magazine for 30 tools, sk40. Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2000, Two Hermle C 800 V machining centres for sale. Hermle C 800 V Year of manufacture: 2000 Control: Heidenhain TNC 430 Technical specifications: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Table clamping surface: 1000 x 560 mm Max. table load: 1000 kg Distance spindle/table: 100–500 mm Spindle speed: 8000 rpm Ksdpeylkzzsfx Ap Aslw SK40 30 tool changer positions

Condition: ready for operation (used), Year of construction: 1999, Make: HERMLE Type of machine: C 800 V Year of manufacture: 1999 Kjdpsyfgtasfx Ap Aslw Control system: Heidenhain 430 Machine's weight: 7000 kg Tool holder: SK 40 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 8 000 min⁻¹ Table dimensions: 1000 × 560 mm Number of tools in the magazine: 30 Pl.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 20,222 h, functionality: fully functional, machine/vehicle number: 14631, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, spindle diameter: 70 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel distances Travel range X-axis: 800 mm Travel range Y-axis: 600 mm Travel range Z-axis: 500 mm Rapid traverse in X, Y, and Z axes: 35 m/min Max. spindle speed: 16,000 rpm Klsdpfx Aoxnkwgep Aew Clamping table surface: 1,000 x 560 mm Spindle taper: HSK A63 (DIN 69063) Spindle diameter at front bearing: 70 mm MACHINE DETAILS Control: HEIDENHAIN TNC 430 Dimensions & Weight Dimensions (L x W x H): 3,300 x 2,400 x 3,000 mm Weight: 7,000 kg Coolant tank capacity: 300 l Operating hours Spindle hours: 20,222 h Power-on hours: 49,977 h EQUIPMENT 3D probing system Technical documentation Note: The mounting plate currently fixed on the worktable, as well as tool holders and tools, are not included in the scope of delivery or sale.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 2,466 h, functionality: fully functional, machine/vehicle number: 13147, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 560 mm, table length: 1,000 mm, TECHNICAL DETAILS Travel X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle Speed range: 20 – 12,000 rpm Tool holder: SK40 Table Dimensions: 1,000 x 560 mm Tool magazine: 30 positions MACHINE DETAILS Kjdpsw Nqh Aefx Ap Ajlw Weight: 7,000 kg Spindle hours: 2,466 h Machine operating hours: 34,485 h Power: 15 kW (at 40% duty cycle) Frequency: 50 Hz Operating voltage: 400 V Control voltage: 24 V Total rated current: 44 A EQUIPMENT Chip tray Heidenhain TNC430 control Heidenhain touch probe system Extraction unit Electronic handwheel

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 15744, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, table load: 1,500 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 600 mm Kledpjzcymzsfx Ap Ajw Travel range, Z-axis: 600 mm Table length: 1,000 mm Table width: 560 mm Table load capacity: max. 1,500 kg Spindle mount: HSK63 Spindle speed: 10,000 rpm Tool changer: 30 positions Rapid traverse: 35 m/min Acceleration: 5 m/s² MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,500 x 2,800 mm Weight: 7,200 kg Total connected load (including coolant pump): 42 kVA

Condition: used, Year of construction: 2000, controller manufacturer: Heidenhain, controller model: TNC 430, _____ Description: Year of manuf. : 2000 Control : Heidenhain TNC 430 Speed : 16000 rpm Movement X/Y/Z : 800/600/500 mm Tool holder : SK 40 Spindle: Technology:Motorspindle Speed:16.000 rpm Power (ca.):15 kW Torque (ca.):130 Nm Taper:SK 40 NC-Swievelroundtable: Klodpfxszng Hqs Ap Ajw Technology:Swivelroundtable with Clamping plates A-Axis:+/- 110° C-Axis:360° Clampingsurface:ø280 mm Tableloading (max.):250 kg In general: Toolmagazine:30 stations Rapid travers in X/Y/Z:35 m/min Equipment/Accessory: Positionsensor:Direct in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling with Highpressure Workpiecemeasurement:Touchprobe, Renishaw OMP 60 Workpiececlamping:Zeroclampsystem, Stark Toolbreakagecontrol:Laser, Renishaw TRS1 Oilmistseparation:Mechanical extraction, Handte OE-DAH Setup operations:Electronic handwheel Toolholder:Misc. used toolholder SK40 Further Equipment:Rinsing pistol Further Accessory:Misc. used clampingrails with jaws, HEMO

Condition: excellent (used), Year of construction: 1998, x-travel 800 mm y-travel 600 mm Kledpfx Apjx Dndcj Aew z-travel 500 mm

Condition: used, Year of construction: 2002, operating hours: 138,929 h, functionality: fully functional, machine/vehicle number: 15233, feed length X-axis: 900 mm, feed length Y-axis: 630 mm, feed length Z-axis: 500 mm, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, table width: 465 mm, table length: 800 mm, type of input current: three-phase, rotational speed (max.): 16,000 rpm, rotational speed (min.): 20 rpm, table load: 1,000 kg, overall weight: 6,000 kg, input voltage: 400 V, controller manufacturer: Heidenhain, controller model: iTNC 530, torque: 16,000 Nm, workpiece length (max.): 3,177 mm, workpiece width (max.): 2,490 mm, workpiece height (max.): 2,750 mm, spindle motor power: 15,000 W, nominal power (apparent): 30 kVA, number of spindles: 1, spindle nose: SK 40, tool diameter: 80 mm, tool length: 250 mm, tool weight: 6,000 g, operating hours of spindle: 30,484 h, number of slots in tool magazine: 30, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this used HERMLE C 600 V, manufactured in 2002, for sale. Manufacturer: HERMLE Model: C 600 V Kedezldknjpfx Ap Aelw Year of manufacture: 2002 Condition: used If you have any questions or require further information, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16065, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 16,000 rpm, The seller can handle the disassembly and loading for €1,250! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 500 mm Spindle speed: 16,000 rpm Tool holder: SK 40 Milling spindle diameter at the front bearing: 70 mm Klsdpfx Apezdttpj Aow Table clamping surface: 1,400 x 900 mm MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 EQUIPMENT Tool changer

Condition: used, Year of construction: 2002, total height: 2,700 mm, total length: 3,000 mm, total width: 2,300 mm, overall weight: 6,000 kg, table load: 200 kg, Hermle C 600 V vertical CNC machining centre, manufactured in 2002, with a Heidenhain TNC 430 control system. The machine has travel ranges of approx. 600 x 450 x 450 mm and is equipped with an SK40 spindle and a tool changer. A chip conveyor and a complete coolant system are included, meaning the machine is ready for immediate use. The machine is in used but fully functional condition and can be demonstrated whilst powered up. Table diameter: 280 mm Travel X-axis: 600 - mm Table load max.: 200 kg Dimensions (LxWxH) approx.: 3000 x 2300 x 2700 mm Travel Y-axis: 450 - mm Weight approx.: 6,000 kg Travel Z-axis: 450 - mm Year of construction: 2,002 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes Klsdpfx Apey S Nire Asw

Condition: used, HERMLE C 600 V is a 3-axis machining center, engineered for precision, high accuracy and reliability. Table 800×465 mm, travels X 600 / Y 450 / Z 450 mm, table load max 200 kg; tool changer 30 stations, spindle taper HSK‑A63. Spindle 20–16,000 min⁻¹, spindle power 15 / 10 kW; feed 1–30,000 mm/min, rapid 35 m/min, max feed force 6000 N. Supply 3×400 V 50 Hz, total power 35 kVA, weight ≈6800 kg, size 2500×2020×2750 mm, noise 78 dB(A). Coolant through spindle 40 bar. Achieves tight tolerances; typical sectors: automotive, aerospace, medical, watchmaking, tooling. Kodjy S Dddspfx Ap Ajlw

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Hermle C 250 V, Year of manufacture: 2025, Control system: Heidenhain 7, Travel range X/Y/Z: 600/550/450 mm, Tool changer: 30-position, Kedpoy Uwhujfx Ap Aelw Tool holder: HSK 63, Spindle speed: up to 16,000 rpm, Fixed table, Table size: 800 x 616 mm, High-pressure coolant system: 40 bar, Paper band filter system, 3D measuring probe: Blum TC, Blum LG 53 WZ for measuring / breakage detection, Chip conveyor, Enclosure roof: manual.

Year of construction: 2002, condition: excellent (used), HERMLE C 800 U CNC machining center Accessories incl.: among others: 3D touch probe, tool holder set, various clamping devices, chip tray, hydr. aggregate, double back-up Technical Data speed: 0- 18`000 rpm spindle nose: HSK-A63 Feeding speed: 1-35 m/min feed force: 8000 N Klsdpfxemqk E To Ap Ajw X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm dimensions of the machine: 2700 x 2210 x 2930 mm Weight: 8500 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC Kjdpfowbi A Dex Ap Aelw tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Spindle hours: 13,465 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: excellent (used), Year of construction: 2010, Heidenhain iTNC 530 control Travel paths X/Y/Z: 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Tool magazine for 30 tools + additional magazine for 57 tools, HSK-A 63 Internal coolant supply 40 bar Chip conveyor Heidenhain measuring probe Blum laser system Kedpfx Asynw Erjp Aslw

Condition: ready for operation (used), Year of construction: 2003, Make: HERMLE Type of machine: C 800 U Year of manufacture: 2003 Control system: Siemens 840D Machine's weight: 9.000,- Tool holder: SK40 Klsdpfjtmtxmox Ap Aew x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 16.000 min-1 Number of tools in the magazine: 80 Pl.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 26,863 h, functionality: fully functional, machine/vehicle number: 12803, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: HEIDENHAIN TNC 430, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding constitutes an obligation for timely collection between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Travels Travel X: 600 mm Travel Y: 450 mm Travel Z: 450 mm Feed range in X: 1–2,000/3,0000 mm/min Feed range in Y: 1–2,000/3,0000 mm/min Feed range in Z: 1–2,000/3,0000 mm/min Rapid traverse in X axis: 35 m/min Rapid traverse in Y axis: 35 m/min Rapid traverse in Z axis: 35 m/min Clamping table surface: 800 x 465 mm Max. spindle speed: 12,000 rpm Measuring system resolution: 0.1 µm Input unit measuring system: 0.1 µm Display increment measuring system: 0.1 µm MACHINE DETAILS CNC control: HEIDENHAIN TNC 430 Dimensions & Weight Dimensions (L x W x H): 2800 x 2100 x 2700 mm Weight: 6,700 kg Operating hours Spindle hours: 26,863 h CNC controller operation hours: 81,084 h Kedexnkfkepfx Ap Ajlw EQUIPMENT Individual feed motors for each axis – three-phase (brushless) Note: The clamping devices (vices, chucks, etc.) mounted on the worktable are not included in the scope of sale or delivery. The machine is offered without tool holders and tools.

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 12644, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Bids are binding and require timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel distances Travel distance X-axis: 1,200 mm Travel distance Y-axis: 900 mm Travel distance Z-axis: 500 mm Spindle Minimum distance from working spindle to top edge of table: 180 mm Maximum distance from working spindle to top edge of table: 680 mm Milling spindle diameter at front bearing: 70 mm Ksdpfx Aoxqfzrop Aelw Spindle speed: 15,000 rpm Tool holder: HSK A63 Feed Feed rate X-axis: 1 – 3,000 mm/min Feed rate Y-axis: 1 – 3,000 mm/min Feed rate Z-axis: 1 – 3,000 mm/min Work table Table dimensions: 1,400 x 900 mm Number of T-slots: 14 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Electrical data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 31 A Connected load: 45 kVA Dimensions & weight Dimensions (L x W x H): 6,000 x 3,200 x 2,900 mm Weight: 12,000 kg EQUIPMENT 30-position tool changer Measuring probe Tool holders in the tool changer Note: Transport can be carried out on a truck up to 3,000 mm width.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 11879, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain TNC430, overall weight: 7,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, 3-axis Hermle C 800 V vertical machining center Robust construction and precision for complex machining tasks Equipped with a tool changer with 30 positions. Kledpfx Aezmqhcop Ajw The machine has already been disassembled and is available immediately. The machine operated flawlessly until its last day of use.

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, table width: 560 mm, table length: 1,000 mm, spindle speed (max.): 15,000 rpm, number of axes: 3, This 3-axis Hermle C800V was manufactured in 1996. It features a SK40 spindle, capable of reaching up to 15,000 RPM, and includes tool length measuring. Ideal for precise vertical machining tasks. Contact us for more information about this machine. Kledpox D Izzefx Ap Aew • Tool length measuring • Coolant pressure: 30 bar Technical Specification Through-spindle Coolant Yes