Used Heesemann Mfa 6 for sale (36)

Condition: good (used), working width: 1,350 mm, HESEEMANN LSM8 Bcedpsxcg Scjfx Ahvow

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, working width: 1,350 mm, overall weight: 10,000 kg, input current: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Machine Base Conveyor unit with a single transport belt, adjustable feed speed from 3 to 15 m/min by frequency inverter, including transport belt cleaning device. Constant working height of 920 mm. Automatic adjustment for various workpiece thicknesses (3 - 80 mm) via motor-driven movement of the upper machine section. The lifting gear’s toothed belt is dust-protected, and its operation is monitored via the integrated control cabinet. 1. Cross Sanding Unit Belt dimensions: 5,400 x 150 mm Drive power: 13/17 kW Sanding belt with additional blast tube for belt cleaning, wear-resistant brake unit, pressure segment belt system, intermittent belt cleaning system, and belt alignment control. Includes a door with glass window. 2. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Drive power: 13/17 kW Bcodpsxp Hvnjfx Ahvjw Belt with double cleaning nozzles, wear-resistant brake unit, automatic belt length compensation, sanding belt operation counter to feed direction, intermittent belt cleaning, and infrared belt control. The front roller (steel) has an eccentric bearing for light calibrating, controlled from the operator terminal. 3. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Belt speeds: 0.5 – 18 m/s Drive power: 17 kW with frequency inverter Continuously adjustable sanding belt speed, double cleaning nozzle setup, wear-resistant brake unit, automatic belt length compensation, counter-feed direction sanding, intermittent belt cleaning, and infrared belt control. 4. Brush Roller Unit Centrally height adjustable, includes extraction hood and press-on roller. Roller diameter: 150 mm Drive power: 1.5 kW Bristles: fiber 5. Workpiece Suction Device Ensures safe transport of workpieces shorter than 500 mm in the feed direction, with integrated extractor fan. Voltage: 400 V, 50 Hz Belt exchange: left Operator terminal: left 6. Ionization Bar (from above) Removes static electricity, including high-voltage transformer. 7. Workpiece blow-off device with rotating compressed air nozzles inside the frame. The machine is ready for operation at your facility after mechanical and electrical overhaul by an authorized Heesemann service partner. Fitted with a new conveyor belt. Commissioning and training at your site may be arranged subject to negotiation. Transport costs negotiable – loading included in the price. If you have any questions, feel free to contact me. Paweł Szczepański +48 795 517 258

Condition: excellent (used), Year of construction: 1997, total length: 4,400 mm, working width: 1,400 mm, height adjustment type: electric, input frequency: 50 Hz, input voltage: 400 V, Good day, We present for sale Heesemann LSM 8 wide-belt grinding machine in a system of four grinding units: transverse unit / longitudinal unit with calibration roller / longitudinal unit with reverser / longitudinal unit + dust collection brush. Machine after mechanical overhaul and inspection, checked and set up, ready to work. Year of construction: 1997 Feed speed: 5-25 m/min - infinitely adjustable from the control panel Working height: 880 mm Workpieces machined: 3-80 mm Energy demand: 107 kW - at full load Total weight: 10250 kg Control: control panel with physical buttons and display Controls: and side of abrasive belt change: right Single conveyor belts, perforated, perforated table with channel and vakuum fan - for safe transport of short workpieces. Part pressure: rubberized rollers fi 70 mm. Abrasive belt Q aggregate: 5400 mm x 150 mm Motor power: 13/17 kW - two-speed motor - belt speed: 12 m/s / 24 m/s Belt "sergeant": 4850 mm x 141 mm Longitudinal belts L aggregate: 2620 mm x 1450 mm Motor power: 16.5 kW / 21 kW - two-speed motors - 10 m/s / 20 m/s Bcodpfeu Hlzfjx Ahvsw Pressing: Pressure beams with computer-controlled selective pressure control - CSD® system with infinitely variable pressure adjustment of individual pressure elements for trouble-free multi-row loading. Reading control roller distance: 16 mm. The abrasive belts have a cleaning system - blow-off and dust extraction. Workpiece tolerance compensation to a maximum of 2 mm by maintenance-free pressure electromagnets. Working width, as well as the beginning and end of the grinding of the pressure bar electronically controlled. Cleaning of the abrasive belts by means of blow-off tubes, dust extraction by means of integrated exhaust channels, activation of the blow-offs automatic, upon detection of workpieces in the machine. At the end, a cleaning/deblasting brush fi 150 mm with an exhaust duct for dust removal. Additional blow-off rotors at the exit of the machine with an exhaust channel. Commissioning at the new site and initial training in operation - to be agreed. Price negotiable on request, machine available immediately.

Condition: used, Wide belt sander Manufacturer: Heesemann Model: KSM1 Sanding width: 1,300 mm Workpiece thickness: 3-140 mm Bedpfxowv Ta No Ahvecw Feed speed: 4.5-22 m/min Sanding belt dimensions: 2,620 x 1,350 mm Brushing device Brush roller diameter: 150 mm Drive power: 1.5 kW Space requirement (L x W): 1,850 x 2,470 mm

Condition: good (used), Year of construction: 1994, Technical data: - Manufacturer: Heesemann Bdjdmayow Dplws Tmbeh - Type: EA4 - Year of construction: 2002 - Working width: 1,300mm - Working height: 880-920mm - Scooter transport, rubberized rollers - Roll pitch: 65mm - Roll diameter: 60mm - Fine dust filter Arrangement of the dust removal modules seen in the direction of flow: 1) Air blowing channel 1 piece from below 2) Ionization from below 3) Air blowing channel 2 pieces from above (With its own fan, no compressed air required) 4) Ionization bar from below and from above Installation dimensions: - Installation length: 830mm - Width: 2.245mm - Height: 1,470mm Bcsdpfx Ahjxiy Htsvew - Suction nozzle: D 160mm - Height adjustment: motorized - Seperat control panel with hight adjustment included ( see pictures )

Condition: good (used), Year of construction: 2000, Special-purpose machine, not a through-feed machine but a support machine, approximately 150 cm long where the workpiece is clamped. 4 units positioned transversely to the feed direction. It was used for intermediate sanding of polyester lacquer to achieve high-gloss finishes on dashboard panels for luxury cars. The total machine length is 12 m. Bodpoxivbmsfx Ahvocw

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,350 mm, The HSM is the precision surface sanding machine tailored to the needs of small and medium-sized craft and industrial businesses. Whether for effect sanding, cross sanding, lacquer or high-gloss sanding, for panels, solid wood, or veneered workpieces – the Heesemann HSM is the perfect sanding machine for the trade! The surface sanding machine is particularly attractive for joiners and interior fitters. The HSM is available in predefined standard configurations, equipped with two, three, or four units, and can be fitted with a cross belt for cross sanding applications. Units and features can be selected individually. Bcodpfxow Db Dre Ahvew We are happy to provide you with a customized offer.

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,350 mm, The HSM Compact is the universal wide belt sander for workshops. It is perfect for calibrating, intermediate sanding of veneers and lacquer, structuring, and cleaning of panels, solid wood, or veneered workpieces. Thanks to its compact dimensions, it is ideally suited for a wide range of requirements. With the HSM Compact, you get a multifunctional sanding center occupying just 4.5 sqm, making it ideal for producing a variety of surface finishes. It is Heesemann’s smallest machine and comes standard with the patented CSD magnetic pressure beam, allowing you to move from manual sanding to automation. HSM .2 Compact ROLLER/LONGITUDINAL SANDING UNIT Bcjdpfxjw Dbx Ne Ahvjw - Year of manufacture: 2025 - Working width: 1,350 mm - Vacuum clamping system with vacuum extraction table and demand-driven suction - Constant working height (880 mm) - Workpiece thicknesses: 3–200 mm - Automatic workpiece thickness measurement at infeed - Non-driven rollers at machine infeed and outfeed - Electromagnetic pressure beam (CSD) - 15.6″ touch display - LED lighting on abrasive belt support side - Outfeed folding table with wooden surface - Structuring brush unit (Ø 200 mm) incl. 5.5 kW drive via frequency inverter and quick-change system, Anderlon fill material - Cleaning brush unit, horsehair (Ø 120 mm)

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, working width: 2,000 mm, overall weight: 14,000 kg, table height: 900 mm, Equipment: 1 working unit with calibration roller 1 working unit with segmented magnetic CSD pad controlled by CNC Bcedpewy Nxvofx Ahvew 1 working unit with segmented magnetic CSD pad controlled by CNC

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,350 mm, The JSM is an affordable all-round machine for small and medium-sized craft enterprises with high demands on surface quality. It is available in two sanding widths and three equipment packages. Depending on the package, it is ideally suited for solid wood, veneer, and lacquer sanding. - Sanding width: 1,100 or 1,350 mm - Feed unit with profiled conveyor belt - Feed speeds: 3 - 12 m/min - Variable working height via motorized height adjustment (maximum table height 880 mm) - Workpiece thicknesses: 3 - 160 mm - Pressure roller (Ø 50 mm) - Table extensions with non-driven rollers at infeed and outfeed (300 mm each) - 15.6" touch display (integrated) - CSD pressure beam system (magnetic pressure beam) - Remote maintenance program - Sanding belt length: 2,150 mm, sanding belt width: 1,120/1,370 mm - EMS Energy Management System for energy-efficient machine operation - 1 emergency stop switch at the terminal, 2 emergency stop switches at the machine outfeed - LED lighting inside the machine (on the belt support side) Bcodpfswz Ignsx Ahvow - Terminal and belt support side on the left - Electrical version: 400 V, 50 Hz Advanced package additional features: - Vacuum table with pre-drilled holes for connecting the vacuum blower - Vacuum blower integrated within the machine - Workpiece cleaning with oscillating air nozzle - CSD pressure beam system (magnetic pressure beam) instead of the ACP system - Oscillating sanding belt discharge - Belt Manager software

Condition: like new (used), Year of construction: 2018, functionality: fully functional, working width: 1,300 mm, Equipped with: 1 transversal belt with CNC-controlled CSD magnetic pads, 1 longitudinal belt with 1 retractable descending roller + CNC-controlled CSD pad, 1 cleaning brush. Bsdpfxowy Npuo Ahvjcw