Used Haas Vf 6 for sale (245)

Condition: used, Year of construction: 2010, functionality: limited functionality, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, nominal power (apparent): 22 kVA, controller manufacturer: Haas, controller model: MOCON 17.28, table width: 1,626 mm, table length: 710 mm, overall weight: 12,000 kg, spindle speed (max.): 7,500 rpm, number of spindles: 1, number of slots in tool magazine: 30, type of input current: three-phase, Equipment: chip conveyor, Vertical 3-axis machining center Haas VF6 / 50 HE Linear guideway machine with up to 610 Nm torque (at 500 rpm) Travel paths: X 1626 mm Y 813 mm Z 762 mm Linear position measurement system 2-speed gear spindle SK50 with 7,500 RPM and 22.4 kW Automatic tool changer with 30 +1 positions Internal coolant supply with 1000 psi (approx. 70 bar) Coolant tank 360 liters Spiral chip conveyor Includes: Lsdpfxsw Rbx Uj Afashf Oil mist extraction unit Ethernet interface RENISHAW wireless tool measurement system Additional loading fixture for inserting tools into the machine Macro programming enabled. The machine is only partially functional.

Condition: used, Year of construction: 2015, input voltage: 354 V, type of input current: three-phase, Equipment: chip conveyor, We offer this used Haas VF-6SS vertical machining center, year of manufacture 2015. The machine is in excellent condition, like new, with no collision history. Model: VF-6SS Ledpfxjy D Epfo Afaehf Serial number: 1124558 Production date: 07/2015 Voltage: 354–488 V Phases: 3 Frequency: 50/60 Hz Rated current: 40 A Maximum current: 70 A Short-circuit interrupting capacity: 10000 A Short-circuit current: 5000 A Wiring diagram: 96–0284 If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2014, Main Drive Number of axis 3 Movement X-Axis Movement 1626 mm Z-Axis Movement 762 mm Y-Axis Movement 813 mm This 3-axis HAAS VF-6SS was manufactured in 2014, featuring a robust direct-drive spindle with a 22.4 kW motor and a maximum speed of 12,000 rpm. It supports a table load of 907 kg and includes a side-mount tool changer with a 30 + 1 tool capacity. Ideal for high-precision machining with rapid feed rates up to 30.5 m/min. If you are looking to get high-quality milling capabilities consider the HAAS VF-6SS machine we have for sale. Contact us for more information. Application Types Lhsdsx Hbl Uopfx Afaof Milling

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 40671, travel distance X-axis: 1,650 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 762 mm, table width: 711 mm, table length: 1,626 mm, table load: 1,814 kg, spindle speed (min.): 7,500 rpm, spindle motor power: 15 W, number of slots in tool magazine: 25, "HAAS" VF 6 machining centre Lhsdswutz Ropfx Afasf

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Lhodst Dmmvepfx Afajf Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Condition: used, Year of construction: 2010, functionality: fully functional, HAAS VF6 5 AXIS WHEEL MACHINE CNC MACHINE £45K PLUS VAT Lhedpex U Earjfx Afaof This machine is set up for the five axis machining of automotive wheels. Extra Z height machine to allow full use of 5 axis 2010 machine. 10k spindle side mount tool changer High speed machining enabled Networking enabled. we can set up the machine if required.

Condition: used, Year of construction: 2003, operating hours: 3,718 h, functionality: fully functional, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, rotational speed (min.): 8,000 rpm, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, documentation/manual, HIGH PRESSURE CTS20 BAR Lhodsxb D Aispfx Afasf 4/5 AXIS TABLE

Condition: good (used), Year of construction: 2007, Traverses X Y Z: 1270 x 660 x 635mm, Table 1321 x 584mm, Lodpfxey Eyaue Afashf Spindle Speed 0 – 7500rpm, Spindle taper BT 40, Spindle Motor 20Hp, HAAS Control, 20 Station tool change, coolant

Condition: excellent (used), Year of construction: 2020, Traverses X Y Z 3048 x 1016 x 762mm, Table size 3048 x 711 mm, Ljdpfjy Emyuox Afajhf Maximum workpiece weight 1814 kgs Spindle speed 8,100rpm, Spindle taper BT40, Motor 30HP, Haas control, 30 station ATC

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 760 mm, controller manufacturer: HAAS, table load: 1,800 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 22,000 W, number of axes: 3, This 3-axis HAAS VF-10/50HE vertical machining centre was manufactured in 2009. It features a generous X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 760 mm. The machine is equipped with a robust table size of 3000 x 800 mm and a maximum load capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50HE machine we have for sale. Contact us for further details. Lhedpfx Aoy Duhdsfajf • Control: Haas, 15" LCD display • Max. torque: 460 Nm • Tool changer: 30 stations, SK50 • Tool change time: 4.2 s • Table size: 3000 x 800 mm • Options on machine: • Through-spindle coolant, 20 bar • Spindle oil cooling • Handwheel Additional equipment • Chip conveyor Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, This 4 axis HAAS VF 2 SS YT vertical machining center was manufactured in 2020. Ideal for precision machining, it offers robust construction and advanced control technology. If you are looking to get high-quality milling capabilities, consider the HAAS VF 2 SS YT machine we have for sale. Contact us for more information. Standard equipment • 12,000 rpm spindle • High-speed 30+1 side-mount tool changer • Window air blast • 55-gallon coolant tank • Control system (Haas Control) • Ethernet interface • WiFi connection • Power failure detection module • Advanced tool management • Media display (M130) • HaasConnect (remote monitoring) • Safe Run • HaasDrop • Rigid tapping Lhjdjyaix Uopfx Afaef • Standard program memory (1 GB) • Stainless steel way covers • Phone charging station Included equipment • 4th + 5th axis preparation (pre-wiring) • High-speed machining option • Export packaging • Rotary table HRT210 • Direct control by mill CNC • Programmable coolant pump • Chip auger • Chip tray filter kit • Through-spindle coolant (300 psi / 21 bar)

Condition: excellent (used), Year of construction: 2006, Haas VF-2SS vertical machining center, with 4/5 axis trunnion table Year: 2006 CNC Control Haas CNC Table size 914 x 356 mm Table load 680 kg Movement X-axis 762 mm Movement Y-axis 406 mm Movement Z-axis 508 mm Spindle taper SK40 Spindle speed 12000 rpm Spindle motor 22,4kW Tool magazin capacity 24 + 1 Accessories/options: - swarf spiral Lhsdjy Av Ehopfx Afaof - 4/5 axis trunnion table, SRT160H type - Renishaw system - coolan tank - tool holders, SK40

Condition: excellent (used), Year of construction: 2003, HAAS VF1 machining center Year 2003 In very good condition. The machine was used in a training school. Lhjdpjy D S Twjfx Afajf Very little used.

Condition: excellent (used), Year of construction: 2017, x-travel 1016 mm y-travel 508 mm z-travel 635 mm Control HAAS spindle turning speed range 8000 U/min spindle taper 40 table-size 1219 x 457 mm table load 1,588 t Working speed 16,5 m/min tool piece magazine with 24 total power requirement 22,4 kW weight of the machine ca. 6,3 t dimensions of the machine ca. TBH 2,48 x3,15 x2,5 (2,9) m Well-maintained machine with only 1,603 operating hours - Includes 4th axis HAAS HRT310 - Includes tailstock for 4th axis - Includes Renishaw HAAS WIPS Wireless Intuitive Probing System Ledpoy Aphisfx Afajhf - Includes 48 tool holders, some with tools - Includes chip conveyor - Includes internal spindle coolant - Includes programmable coolant nozzle - Includes USB interface - Includes network connection

Condition: used, Year of construction: 2007, machine/vehicle number: 1060532, Table dimensions: 800x3100 mm Ledpfey Alfdjx Afaehf 7500 rpm

Condition: ready for operation (used), Year of construction: 2010, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 8,000 rpm, Haas VF5/40XT milling machine from late 2010. The machine is connected and operational—ready for work, following the replacement of the X-axis ballscrew. Plexiglass door guards and side covers have been replaced with new ones. Calibration was performed using a Renishaw Ballbar; with further leveling and configuration, even higher precision can be achieved. The machine can be inspected, tested, etc. Purchase including transport, installation, training, leveling, and configuration is possible for an additional fee. Loading for transport is included in the machine price. Spindle taper: ISO40 Tool magazine: 40 tools Through-spindle coolant Rigid tapping Macros Lsdpoy D Enhsfx Afaohf Auger chip conveyor Spindle orientation X 1524 mm, Y 660 mm, Z 635 mm—the X-axis is extended in the XT series.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis HAAS VF-8 vertical machining center was manufactured in 2003. It features a 1626 x 1016 x 762 mm travel range, a 15.4 kW spindle power, and a maximum spindle speed of 7500 rpm. Equipped with a BT-40 tool holder, a 24+1 position tool changer, and a screw-type chip conveyor. If you are looking to get high-quality milling capabilities consider the HAAS VF-8 machine we have for sale. Contact us for more information. Lhodpfjx D H Ruox Afajf • Distance spindle–table: 102 mm • Max cutting feed: 12 m/min • Rapid feed (X/Y/Z): 18 m/min • Tool changer type: Random vertical • Tool magazine capacity: 24 + 1 positions • CNC memory: 1 MB • Monitor: 15" color • Data interface: RS232 • Rigid tapping: Yes • Options/features included: • 2-speed gearbox spindle • 4th axis drive and wiring • Intuitive programming system • Coordinate rotation system • Macro variables and scaling functions • Programmable coolant nozzle • Internal work light Additional equipment • Screw-type chip conveyor Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. • Distance spindle–table: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max cutting feed: 20.5 m/min • Rapid feed (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system Lhjdpfex D Irmsx Afasf • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment • Screw-type chip conveyor • Auxiliary high-pressure filtration system

Condition: used, Year of construction: 2004, Machine Type: Vertical Machining Center (VMC) Ledpfsyfmttjx Afaehf Travels X-axis: 1,270 mm (50") Y-axis: 508 mm (20") Z-axis: 635 mm (25") Table Table size: 1,321 × 495 mm (52" × 19.5") Max table load: 1,587 kg (3,500 lbs) T-slots: 5 slots, 16 mm Spindle Spindle taper: CAT 40 / BT40 Spindle speed: 8,100 rpm (optional 12,000 rpm) Spindle motor: 30 hp (22.4 kW) vector drive Drive type: Inline direct-drive Coolant Through Spindle (TSC): 300 psi (21 bar) standard for TSC version Tool Changer Automatic Tool Changer: 40 tools (side-mount ATC) Tool change time: ~2.8 sec (tool-to-tool) Max tool weight: 5.4 kg (12 lbs) Feedrates Rapid traverse: 25.4 m/min (1,000 ipm) Cutting feed: up to 16.5 m/min (650 ipm) Accuracy Positioning accuracy: ±0.005 mm Repeatability: ±0.0025 mm Control Control system: Haas CNC Control Memory: 1 GB Networking: Ethernet / USB Dimensions & Weight Machine weight: approx. 7,100 kg Footprint: approx. 4.1 × 2.8 m Height: approx. 3.1 m Electrical Power requirement: 208–240 / 360–480 V, 3-phase Air requirement: 6.9 bar (100 psi)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 8,960 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2014. It features impressive travels of 1270 mm in the X-axis, 508 mm in the Y-axis, and 635 mm in the Z-axis. The machine is equipped with a powerful 30 hp spindle, capable of reaching speeds up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details. • Spindle drive: Inline direct-drive • Tool changer: 24+1 side-mount, high-speed • Rapid traverse: 35.6 m/min (1400 ipm) • Program memory: 1 MB • Control display: 15" color LCD • Connectivity: USB port • Functions: Rigid tapping • Coolant system: 208 L flood coolant system Technical Specification Taper Size SK 40 Lodpfx Asyzqraofaehf

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, In 02/2026 new cooling threw spindle. Including 4th axe and probes. Table mm 914 x 356 Axes: (X) mm 762 Lhjdpfx Ajyzpwujfajf (Y) mm 406 (Z) mm 508 max. table loading kg 1361 Tool changer 24 Taper in spindle ISO 40 Spindle revolutions 10000 rpm Machine weight kg 3311

Condition: used, Year of construction: 2018, Vertical Multi-Operation Machine 40-kona type VF-4-EU Machine travel X 1270 mm Y 508 mm Z 635 mm - Direct-driven spindle 8100 rpm (22.4 kW) - Tool magazine 20 pockets - 15" LCD screen - Media Display (Documents/Images via screen) - Haas-Connect (Machine status via mobile app) - USB port - 32GB memory - Wifi - Ethernet - Synchronized threading - Coolant system 208 liters - Key memory lock - Power outage detection module Chip conveyor screw type Automatic air blowing Lhodsyybmlopfx Afasf Prepared for coolant through the spindle Programmable coolant nozzle BT-40 option

Condition: good (used), Year of construction: 2014, functionality: fully functional, HAAS VF-3SS Super Speed – 2014 The machine is in good working condition and can be inspected under power. Please note: The rotary table shown in the photos is part of the current production setup and is not included in the sale. Manufacturer: HAAS Model: VF-3SS Year of manufacture: 2014 Travels: X-axis: 1016 mm Y-axis: 508 mm Z-axis: 635 mm Table size: 1219 × 457 mm Maximum table load: 794 kg Spindle: Speed: 12,000 rpm Spindle taper: CT40 / BT40 Ljdpfjyzzfksx Afashf Motor power: 22.4 kW Tool changer: Side-mount tool changer (SMTC) Capacity: 24 + 1 tools Rapid traverse rates: X/Y/Z: 35.6 m/min Machine weight: approx. 5,670 kg Excellent opportunity – attractive price for a HAAS Super Speed machine. Machine available immediately.

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: HAAS, table width: 1,219 mm, table length: 547 mm, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is set up in our warehouse and can be inspected under power! The machine is equipped with: chip conveyor, internal cooling, programmable coolant nozzle, 21-position tool changer, coolant tank, and original documentation. Ledpfx Afjyybimsaohf

Condition: used, Year of construction: 2007, operating hours: 14,500 h, machine/vehicle number: IntNr231533, Haas VF-3 (2007) – 3-Axis Vertical Machining Center Operating hours: approx. 14,500 Power-on hours: approx. 33,000 Machine type: CNC Vertical Machining Center Year of manufacture: 2007 Control: Haas Drive type: High-speed spindle (High Efficiency) Axis configuration: 3-axis machining Technical Data Travel distances: X-axis: 1,010 mm Y-axis: 660 mm Z-axis: 608 mm Spindle speed: up to 10,000 rpm Axis Drives X/Y/Z axes: Ball screws, precision linear guides 3rd axis: Integrated tilting/rotary table, CNC controlled Tool Changer Capacity: 40 tool stations Taper: SK40 Spindle gearbox replaced in 2024 Lodpfxeyxncwo Afajhf Equipment Chip conveyor Installation dimensions: approx. 3,870 x 2,510 x 2,690 mm (W x D x H) Machine weight: approx. 6,260 kg Condition The machine is fully functional both electrically and mechanically. Technical documentation included. The machine can be inspected under power by appointment. All technical data and details are subject to change and prior sale. Errors and omissions excepted.