CLIREF chiller unit with 2 compressors

CLIREF Occasion

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN 4 standard slide units 1 narrow slide units 1 cam shaft Iodpfstzlzajx Ahvjhw working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: M2019011975, cooling capacity: 430 kW (584.64 HP), Carrier Chiller 30 RBP-430-0095-PE (AquaSnap Series) Type: Air-Cooled Liquid Chiller Model: 30RBP-430-0095-PE Variant: 30RBM/RBP Serial Number: M2019011975 Year of Manufacture & Test: 06/2019 Manufacturer: Carrier SCS, Montluel, France (United Technologies, Carrier Corporation, USA) Technical Specifications: Nominal Cooling Capacity: 430 kW Refrigerant: R-410A Circuit A: 23.50 kg / Circuit B: 26.70 kg Total Charge: 50.2 kg GWP: 2088 Compressors: Danfoss Scroll SH240A4ACE (thermally protected) Power Supply: 400 V / 3 Ph / 50 Hz Maximum Current Draw: 340 A Maximum Starting Current: 210 A Power Input: 210 kW Operating Temperature Range: –20 °C to +52 °C Net Weight: 2760 kg Protection Rating: IP54 Pressure Data Ihsdpfexb D Raox Ahvow Refrigerant: R-410A Allowable Pressure (Min/Max): High side (PS): –1.0 / 44.2 bar (–99.0 / 4420.0 kPa) Low side (PS): –1.0 / 31.1 bar (–99.0 / 3110.0 kPa) Safety Relief Valve Setting: 42 bar Rupture Disc Setting: 45 bar Test Pressure: 15.0 bar (unit leak test) Additional Information: Air-cooled design with axial fans and integrated condensers. Electrical control panel with Carrier management system. Hermetically sealed system, original Carrier service log included. Serviced and maintained by official Carrier service centre.

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Ijdpfx Aovca Izjhvshw Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, workpiece length (max.): 1,000 mm, workpiece weight (max.): 500 kg, number of slots in tool magazine: 120, controller manufacturer: FANUC, total height: 3,138 mm, total length: 2,725 mm, total width: 4,610 mm, overall weight: 12,900 kg, controller model: FS-31IA (MAPPS III), feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (max.): 14,000 rpm, tool length: 500 mm, workpiece diameter (max.): 800 mm, CNC controller: FS-31IA (MAPPS III) Axes X-axis travel mm: 730 Isdovw Sc Topfx Ahvohw Y-axis travel mm: 730 Z-axis travel mm: 850 Rapid traverse m/min: 50 B-axis degrees: 360º (1º) Distance spindle nose - table surface mm: 100 – 830 Acceleration in the axes m/s2: 9.8 (X), 10.8 (Y), 6.9 (Z) Worktable Number of pallets: 2 Table dimensions mm: 500X500 Maximum workpiece size (D x H) mm: 800 X 1000 Max. workpiece weight kg: 500 APC time s: 7 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 22/18.5 Tool holder: No.40 Spindle torque Nm: 220 Tool system Tool holder: BT-40 Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 500 Max tool weight kg: 12 Tool-to-tool time s: 0,9 Chip-to-chip time s: 3,3 Equipment Chip conveyor Workarea light CE conformity Coolant gun TOOL LIFE MANAGEMENT Cooling Tank capacity: 680 Machine running times Rated power kVA: 49 Basic machine dimensions / weight Length mm: 2.725 Width mm: 4.610 Height mm: 3.138 Weight kg: 12.900

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser Ihjdpfsrzq Arsx Ahvew machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Year of construction: 2018, condition: ready for operation (used), Main Drive Spindle speed range 45-6000 rpm Spindle bore Ø62 mm Number of axis 3 Movement X-Axis Movement 260 mm Y-Axis Movement 100 mm (+/-50) Z-Axis Movement 350 mm Tools Number of station 12 Type of tool holder VDI design Media Chip conveyor Yes Additional Equipment SR1453 hydraulic cylinder for chuck operation 1 set V12 VDI design revolver head 1 set Mayfran chip removal preparation 1 set Machining Navi L-g – cutting aid for dampening vibrations during cutting 1 set API library 2 – for Industry 4.0 solution 1 set OKUMA Virus Protection System (OSP-VPS) - Virus protection 1 set 6” chuck Isdpfx Ahjx D Ni Hjvshw This 3-axis OKUMA LB2000 EXII MYC lathe was manufactured in 2018. It features a max machinable diameter of 360mm and a workpiece length of 250mm. The machine offers internal cooling through the spindle, a V12 VDI design revolver head, and a 6” chuck. Equipped with the OSP-P300L CNC Controller and advanced features like the Machining Navi L-g for vibration dampening and OKUMA Virus Protection System. Consider buying the OKUMA LB2000 EXII MYC machine we have for sale. Contact us for further details. Application Types Turning

Condition: new, overall weight: 440 kg, rotational speed (max.): 950 rpm, motor manufacturer: Cummins, Industrial Engine Cummins QSF3.8 97kW It is a complete package with straps and everything, as shown in the picture. Manufactured by Cummins Inc. Engine Serial No. 76501916 Ijdpfov Eabtex Ahvshw Family KCEx103.8AAB Gross Rated kW - 97 kW at 2500 rpm Idle RPM 950 Transport weight - 440 kg Emission Level: Tier 4 Final / Stage IV Configuration: 4-cylinder, turbocharged, high-pressure common rail Cooling: Liquid-cooled Keywords: CM2350 Continental P5317106 1T2350A07192732 T1669 FS109S CB80031.12 BFCEC P5476423 S03068876501946

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 785 kW (1,067.30 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,190 kg, input voltage: 400 V, total width: 2,330 mm, total length: 8,500 mm, total height: 2,640 mm, warranty duration: 6 months, AIRCOOLED CHILLER EMICON ERAH 8120 MC VS HE KE 785 KW Cooling capacity: 785 kW / 223.2 tons (12/7 — 35°C) EER: 3.02 Refrigerant circuit: 2 pcs. Heat exchanger: Shell-and-tube Bitzer SQDS4010214-CE Condenser: Microchannel Type of refrigerant: R513А Compressors: 2 pcs. Bitzer CSVH25-160Y-40A (Inverter screw) Number of fans: 14 psc. Dimensions: 8,5 х 2,33 х 2,64 m. Weight: 6190 kg. Working hours: 0/0 h. Condition: Never used, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Alternative names used in European markets: Kaltwassersatz (DE), Gruppo frigorifero industriale (IT), Isdpfxoukg R Ue Ahvohw Groupe froid industriel (FR), Chiller wody lodowej (PL), Agregat frigorific (RO), Enfriadora industrial (ES). This unit is listed in English for international buyers.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, 2000 kVA high voltage diesel uninterruptible power supply (UPS) system with two output buses for sale Technical data: 2000 kVA, 10 kV, 50 Hz, power factor 0.8, 1500 rpm The system consists of: • Power generation module (PGM) - diesel engine with optimized emissions, induction coil, synchronous generator; • Starter; • Battery (Pb); Isdpoyfprfsfx Ahvjhw • Redundant start panel RSP; • Diesel generator automatic oil lubrication equipment; • Unit control panel UCP with touch screen and diesel reduction start module; • Auxiliary control panel ACP for radiator and fuel tank control; • High voltage unit reactor panel URP, 10 kV; • Generator transformer panel GTP 660V /400V; • Block transformer panel UTP 10 kV/660V; • Bypass control panel BCP and auxiliary panels DCP and ADC, BCP capable of controlling six (6) parallel operating systems with programmable logic controller PLC. DCP for powering auxiliary medium voltage DC circuits, ADC for alternating current supply to UPS control panels 400V, 320A block. Interfaces of high voltage switchgear with diesel UPS control panel via Modbus and I/0 modules. • Monitoring - standard monitoring system for graphical and digital display of current and stored data, alarms; • Main input power cabinet (MPB), which consists of an input input main cabinet and an output main cabinet: • Input main power cabinet (IMPB) - metal enclosure. for medium voltage distribution, 10 kV, 16 kA - 1 sec., 50 Hz. The circuit breakers are fixed. Must be able to connect six systems operating in parallel: 2 x input circuit breakers Q7A and Q7B, l x UPS system circuit breaker 1Ql, 1 x bypass disconnection panel Q3A and a measurement panel. Must be able to transmit data to the UPS system via Modbus interface; • Output main power cabinet (OMPB) - metal closed, for medium voltage distribution, 10 kV, 16 kA - 1 sec. 50 Hz. The circuit breakers are fixed. Must be able to connect six systems operating in parallel: lx bypass circuit breaker panel 1Q3A. 1xUPS output circuit breaker 1Q2A, 1 x UPS output circuit breaker Q4A, l x UPS output disconnection Q4Ad. 2 measuring panels, 1 x output switch Q80A. Modbus interface with UPS system control panel; • Exhaust system with muffler, exhaust manifold, two flexible connections for diesel exhaust outlets; • Cooler with horizontal radiator cooler (directional blade fan) for diesel cooling with six flexible bellows for connecting drying pipes.

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AST2 115 HE - 2200394103, cooling capacity: 315 kW (428.28 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,181 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 53.8 m³/h, pump pressure: 2.99 bar, total width: 2,190 mm, total length: 3,425 mm, total height: 2,537 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-Cooled Chiller Unit Type: Aries TECH AST2 115 HE Manufacturer: MTA S.p.A. The Aries TECH AST2 115 HE is a compact air-cooled chiller designed for outdoor installation (ambient temperatures from -20°C to +48°C), equipped with a shell-and-tube evaporator, four scroll compressors, compressor shut-off valves, crankcase heaters, phase monitoring, P3 double pump, 598-liter tank, electric frost protection heater, condenser filter, and control and switch cabinet. Cooling capacity (kW): 315 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 53.8 Available pump pressure (bar): 2.99 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R410A Number of refrigeration circuits: 2 Number of compressors: 4 Capacity stages (%): 0-25-50-75-100 Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power input (kW): 158 Max. current (A): 262 Starting current per circuit (A): 507 Protection class: IP54 Dimensions: Length (mm): 3,425 Width (mm): 2,190 Height (mm): 2,537 Weight (kg): 2,583 / 3,181 (transport / operating weight) Connection: DN 100 (Vitaulic) Serial No.: 2200394103 Year of manufacture: 2023 Condition: Visually: 2, Technically: OK & tested Ihjdew R A S Aspfx Ahvjw (Used unit) Price: on request in EUR (plus VAT ex works Nettetal) – 3 months warranty MTA offers, upon request and together with the buyer, a functional test of the chiller prior to collection at the Nettetal branch. Used machines may show visual wear due to previous use. (Subject to technical modifications and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal