Used Heating Coil Water for sale (21,072)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 21FW100020, The FluidWorker® 100 uses UV-C technology to reduce bacteria in machine tool cooling lubricants in an environmentally friendly and efficient way. It is also successfully used for chemical-free control of bacteria in process water systems, e.g. parts washing systems, cleaning baths, hardening coolants, etc. By using a FluidWorker 100 on the machine tank, biocides that are harmful to the environment and health can be significantly reduced. Biocides are the main cause of allergies, respiratory diseases and skin irritation among machine tool workers. The use of a FluidWorker 100 also generally increases the service life of cooling lubricants by at least 30%, thus saving costs for the replacement and disposal of coolants. Njdpfjqvzx Nex Ad Njkt The FluidWorker® 100 works in the bypass on the machine tank. The necessary installation accessories are included in the package.

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted Njdpfx Adjnab Rzs Nskt - pump optionally available - available in 12-16 weeks after order Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: new, Year of construction: 2025, functionality: fully functional, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Nsdpfx Aerivv Eod Nokt Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Nsdpfxew A Iilj Ad Nokt Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) Nodpfx Ajnab Rled Njkt We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: like new (used), functionality: fully functional, machine/vehicle number: Geo Knight Maxi - Press, Year of construction: 2017, Please see PDF for detailed secifications: The Maxi Press AIR is an Automatic large format heat transfer press intended for more automated and Nksdpfjv Dm Udsx Ad Nst higher pressure needs than the Manual version. The Maxi- AIR provides an oversized platen & a better production-oriented press with a single front loading table and high pressure pneumatic lifting system. This pressure system is powered by a dual air-bag, 10-ton, 20,000 lbs max force self leveling mechanism. The press is activated with a push of a button, and automatically releases at the end of the timing cycle. The front console features the Digital Knight control, regulating digital temperature and digital automatic timing control, as well as full air pressure regulation. Ideal applications that the Maxi- AIR has performed flawlessly include: large fabrics & piece goods, full-bleed printed sportswear, banners, fl oor mats, carpets, mouse pads, plastics, sheet metal and much more. Most importantly, the 20,000 lbs of regulated applied force allow for deep embedding of materials such as TILES into nomex padding for full bleed wrap-around printing, as well as larger embossing applications. The Maxi- AIR strongly supports the sublimation transfer process, as well as digitally produced transfers, hot and cold peel plastisol transfers and large format laminating processes.

Year of construction: 2011, operating hours: 8 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S071361/01, USED GODWIN 12 INCH PUMP Nkjdpsxiwawsfx Ad Not MODEL : CD300M SERIAL : S071361/01 ENGING MODEL : CATERPILALR C9 ENGINE SERIAL NO : JSC22260 YEAR : 2011 HOUR : 7.8hrs

Condition: used, machine/vehicle number: LC594, Technical Specifications & Performance Data Nkodpfsydn A Hjx Ad Nst This complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations. Production speed: 13,000–14,000 bottles per hour Containers: PET bottles, neck finish 28 1881 Blow molder: Sidel SBO10, 10 cavities Preform handling: Sidel EBH 2050 preform hopper Air conveyor: Sidel-Alsim Rinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10K Rinser: 48 clamps, 1 water treatment Filler: 60 isobaric valves Capper: 10 heads Premix/Mixer: Sidel-Alsim, 30 m³/h output Bottle dryer: ACI Labeling machine: Krones Contiroll, rotary, 15 stations, PET wrap-around, roll-fed Shrink wrapper: Acmi Fenix, film-only configuration Handle applicator: Smipack HA 35-50-70 Palletizer: Alsim Valiant 1I 1P, fully automatic, push-type Pallet wrapper: PM Pragometal OBS Rotomatic Standard Advanced Automation & Control Systems The line integrates component HMIs and automatic control features at each station to streamline operation and changeovers. The isobaric filling block ensures precise filling for carbonated beverages, while the roll-fed rotary labeling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format components help maintain uptime and reduce setup times in beverage production environments. Production Line Integration Capabilities Designed for inline operation from preform loading through palletizing, the system features smooth bottle transfer via air conveyors and synchronized starwheels in the filling monoblock. It integrates upstream blowing with downstream labeling, shrink wrapping, handle application, and palletizing, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights associated with the 28 1881 neck finish. Machine Condition & Maintenance History This second hand line is available for sale and is presented in ready-for-operation condition. Component years range from 1996 to 2019, reflecting a well-curated selection of bottling equipment. Buyers can arrange inspection to assess performance, equipment condition, and overall line integration prior to deployment in beverage production. Operational Performance & Versatility Optimized for carbonated products, the isobaric filler provides accurate CO₂ retention and foam control. The Sidel blow molder delivers stable bottle quality, while the Krones Contiroll rotary labeler ensures precise PET wrap-around label application at the stated throughput. Downstream packaging includes film-only shrink wrapping and automated handle application for multipacks, with automated palletizing and pallet w...

Condition: good (used), mileage: 397,247 km, power: 353 kW (479.95 HP), first registration: 05/2007, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro4, suspension: steel-air, total length: 9,800 mm, total width: 2,550 mm, total height: 3,860 mm, Year of construction: 2007, Equipment: ABS, air conditioning, cruise control, parking heater, retarder, traction control, trailer coupling, = Additional Options and Accessories = - Digital tachograph - Recording tachograph (control device) - Power take-off (PTO) - Auxiliary braking system = Notes = Number of axles: 3, Configuration: 6x4, Unladen weight: 12,090 kg, Gross weight: 26,000 kg, Total tank capacity: 350 liters, Trailer coupling, King pin diameter: 40 DIN, Number of locks: 2, Suspension type: air suspension, Cruise control, Recording tachograph (control device), Digital tachograph, Air conditioning, Parking heater, Color: White, Maintenance manual, Reversing camera, Engine output: 353 kW (473 Hp), Euro: 4, Transmission type: Opti-cruise, Gears: 12, Clutch pedal, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Power take-off (PTO), PTO type: 1, Body year: 2007, Drum volume: 18,600, Drum volume in: liters, Number of compartments: 3, Type of load: Fuel = Further Information = Axle configuration Tire size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steered; left tire tread: 14 mm; right tire tread: 11 mm; Suspension: leaf spring Axle 2: Twin tires; inner left tread: 6 mm; outer left tread: 6 mm; inner right tread: 7 mm; outer right tread: 7 mm; Suspension: air suspension Axle 3: Twin tires; inner left tread: 5 mm; outer left tread: 5 mm; inner right tread: 5 mm; outer right tread: 4 mm; Suspension: air suspension Weights Curb weight: 12,090 kg Payload: 13,910 kg Gross vehicle weight: 26,000 kg Functional Number of compartments: 3 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Professional conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more…. Please visit our website for special offers and the full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Nkjdpfjwargpex Ad Not Ask directly about our European warranty package.

Condition: new, Year of construction: 1988, For sale: mobile industrial fan from the former GDR, manufactured by VEB MAW Armaturenwerk Wehrsorf (Zittau), powered by a 0.75 kW motor from the USSR. Sturdy steel construction on castors – ideal for dust extraction, air supply, local ventilation, or machine cooling. Technical data: • Airflow: 1020 m³/h • Total pressure: 834 N/m² • Static pressure: 681 N/m² • Density: 1.20 kg/m³ • Speed: 2800 rpm • Power consumption: 0.5 kW • Max operating temperature: 35°C • Year of manufacture: not fully specified – likely 1980–1990 Nedpfoud R Iijx Ad Nskt Motor: • Type: АИР71А2УЗ • Power: 0.75 kW • Speed: 2820 rpm • Voltage: 220/380 V • Protection class: IP54 • Manufactured in the USSR Advantages: • Compact and mobile design • Operational drive, ready for use • Suitable for workshops, paint shops, ventilation, burners

Condition: used, Used Sondex model SF229-IS stainless steel plate heat exchanger. Transmission surface approximately 360 m2. Hot side is rated min/max allowable pressure -1/10 bar at min/max allowable temperature -20/165°C. Cold side is rated min/max allowable pressure -1/10 bar at min/max allowable temperature -20/165°C. Nksdpfx Asyc Tqmsd Net

Condition: used, Used GEMS approximately 56.8sqmt 316L stainless steel horizontall shell and tube heat exchanger. Unit has (260) 316L stainless steel tubes which measure approximately 19mm diameter X 3,650mm long 300 litre capacity, rated 9 bar design pressure at 80 deg.c. 316L stainless steel shell which measures approximately 500mm diameter X 3650mm long 420 litre capacity rated 2 bar/full vacuum design pressure at 120 deg.c. Unit has 316L stainless steel heads. Has bottom mounted support lugs. Last used as a shell condenser. Nkjdpfx Aeyc Tnljd Njt

Year of construction: 2004, condition: good (used), ATMOSPHERIC HEAT TREATMENT LINE (NITROGEN/METHANOL) comprising 3 high-temperature furnaces, 2 tempering furnaces at 450 °C, 1 industrial washer, 1 automatic loader, electrical cabinets, and a storage magazine. Nkjdeyc Sm Tepfx Ad Njt

Condition: used, Year of construction: 2014, Overview The water softener is a double unit with 2x3 bottles. The plant was manufactured in 2014 by the German manufacturer Grünbeck and is free because the owner invests in a new, larger plant. The plant is still in operation and can be inspected. Technical details Capacity: 2x 8 m3/h Softening from approx. 15°dH to approx. 3°dH with flow admixture Last maintenance: 21.3.2022 Incl. 2x salt tank à 210 l Nodpfx Ael Hx Raed Nekt

Condition: new, Year of construction: 2026, neu 2026 070153 prompt, Zwischenverkauf v Türkei Nsdpfx Aowirz Sod Nekt 4800 € 1 500 kg 1200 mm 400 mm 550 mm 300 mm 50 mm 80 mm 0.55 kW 1400 mm 1200 mm 1550 mm 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control

Condition: new, Year of construction: 2026, neu 2026 070155 prompt, Zwischenverkauf v Türkei 6900 € 133.17 € Nkjdpfowirmuox Ad Nst 1 500 kg 1200 mm 400 mm 550 mm 300 mm 80 mm 1450 mm 1200 mm 1640 mm 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC DOWN HOLDER SUPPORT ARM

Condition: used, tank capacity: 3,120 l, GENERAL Design: suspended Remarks: 1 reflux condenser included in the scope of delivery (total height specified incl. reflux condenser); support lugs made of Fe; cut-off connections in the cylinder (see photos) Speed: 13 - 72 rpm Outer diameter: 1,460 mm Inner diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 5,400 mm Heating/cooling: available Power: 7.5 kW Agitator: beam agitator Location: Bremen Technical documentation: Drawing Cylinder temperature control: double jacket Volume: 3,120 liters Double jacket volume: 122.0 liters Cylinder wall thickness: 4 mm Double jacket material: V2A 1.4541 (AISI 304) Product contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 1,610 mm Nkodexqblgopfx Ad Nst Last used for: adhesive production VESSEL Support type: lugs HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole / access port: in top head (DN 400) Outlet: flange DN80 Note: slight residues/adherences AGITATOR Voltage: 380/660 Volt Agitator arrangement: central, in the top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Top head wall thickness: 6 mm

Condition: excellent (used), Year of construction: 2022, For sale: industrial chiller unit from the reputable manufacturer HYFRA, designed for cooling water or process fluids in industrial installations. The unit is in very good visual condition and was manufactured in 2022. It has been professionally dismantled, is complete, and ready for recommissioning after connection. Technical data (from the nameplate): • Model: SIGMA7-S-P • Cooling capacity: 6.9 kW (conditions: 32°C / 20°C) • Year of manufacture: 2022 • Refrigerant: R410A (GWP 2088) • Refrigerant quantity: 1.0 kg (CO₂ eq. 2.1 t) • Power supply: 3 / PE, 380–415 V ±10%, 50 Hz • Rated current: 8.20 A • Rated power: 4.70 kW • Max. ambient temperature: +42°C • Max. pressure (HP): 42 bar • Protection: 16 A • Weight: - dry: approx. 180 kg - filled with water: approx. 300 kg Features / equipment: • Integrated air-cooled condenser Nksdsyc H Iropfx Ad Not • Comprehensive safeguards (pressure, flow, temperature, antifreeze protection) • Clear error code list on housing • Robust, industrial-grade construction • Connection stubs – visible in the photos • European manufacture, CE certification Applications: • CNC machines • Injection molding machines, extruders • Production lines • Process cooling • Plastics, metal, chemical industries

Year of construction: 2026, condition: used, functionality: fully functional, total length: 1,500 mm, load capacity: 18,000 kg, Tragedorn Load Center: 1200 ISO Class: Terminal West Njdsycm Hbepfx Ad Nskt Condition: As new Technical Condition: New Description: 254 mm diameter for steel coil handling

Year of construction: 2026, condition: used, functionality: fully functional, total length: 1,500 mm, load capacity: 18,000 kg, Tragedorn Load center: 1200 Nksdpfxsycm E Rs Ad Njt ISO Class: Terminal West Condition: As new Technical condition: New Description: 254 mm diameter for steel coil handling

Condition: excellent (used), Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, Bosch CHP Complete System (1 Set) – CHP CE 140 N (Year 2016) including Cabero Heat Exchanger/Dry Cooler (Year 2017) For sale is 1 complete, homogenous CHP unit consisting of 1× Bosch CHP Module CE 140 N (gas-powered CHP) including the corresponding peripherals as well as 1× Cabero heat exchanger/dry cooler. The unit is operational and in very good condition. Sale only as a complete package. 1) CHP / CHP Module Manufacturer: Bosch KWK Systeme GmbH Model: CHP CE 140 N Year of manufacture: 2016 Engine: MAN 2867 E 218 (gas-powered Otto engine) Performance data (CE 140 NA / typical as per datasheet series): Electrical output (nominal, 90/70°C): 70 – 140 kWel Thermal output (nominal, 90/70°C): 106 – 212 kWth Gas input: 192 – 384 kW Modulation range: 50 – 100 % Net efficiency: electrical 36.5 %, thermal 55.2 %, total 91.7 % Power supply: 400 V / 50 Hz, 3-phase Own energy consumption (electrical): 2,500 W Max. operating pressure (heating circuit): 6 bar Acoustics / emissions (CE series): Module noise level: 71 dB(A) NOx (dry, 5% O₂): ≤ 0.250 g/Nm³ CO (dry, 5% O₂): ≤ 0.300 g/Nm³ Dimensions (CE 140 NA – indicative values): Width W ≈ 1,160 mm Length L ≈ 3,850 mm Required room height min. ≈ 2,900 mm Nedoycl Abepfx Ad Nokt Wall clearance A > 900 mm 2) Cabero Heat Exchanger / Dry Cooler (1 unit) Manufacturer: Cabero Designation / Item No.: GCDD099MB-2X7-64-S D (EB) EC AXI A Version / Standard: PED / DIN EN 14276-2:2011 Year of manufacture: 2017 Heating surface: 2,742.65 m² Medium: Ethylene glycol 34% / Water 66% Fluid Group: 2 Max. allowable pressure (PS): 12 bar Test pressure (PT): 17.16 bar Permitted temperature range (TS): −40 / +60 °C Volume: 439.5 L Pressure test date: 03./04.07.2017

Condition: like new (used), Year of construction: 2023, x-travel 4216,0 mm y-travel 2007,0 mm z-travel 305,0 mm control CNC table-size 4902,0 x 2134,0 mm max. workpiece weight 1465 kg / m² machine weight ab. 2500 kg Nedpfjyclvnox Ad Nekt total power requirement 30 kW dimensions of the machine ca. 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX Intelli-MAX PC control software for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the A-Jet 5-axis angular cutting head - Height sensor for the A-Jet 5-axis angle cutting head - Laser pointer as a positioning aid - Automatic desludging system MBM ASAS-ME - Compressed air injection for the MBM ASAS-ME automatic desludging system - Clamping and fastening set for sheet material and material holders - Collecting grid in the cutting basin - Sensors for automatic monitoring of the cutting process - Water treatment through water conditioning incl. water analysis - Omni-Start drilling aid (Vacuum Assist) for brittle and laminated materials

Condition: used, tank capacity: 9,140 l, GENERAL Equipment: Crane lugs Construction type: Suspended Remarks: Maximum operating pressure heating coil 35 bar; 3 legs, steel; Manhole diameter approx. 490 mm; several external components made of steel, e.g. manhole cover flange and insulation rings around the cylinder Internal diameter: 1,990 mm Total height: 3,750 mm Heating/Cooling: available Max. permitted operating temperature: 242 °C Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 9,140 liters Double jacket volume: 219.0 liters Cylinder wall thickness: 6.3 mm Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 2,400 mm Last application: Processing of wool grease VESSEL Max. permitted operating temperature: 200 °C Base type: On support legs HEATING/COOLING JACKET Internal temperature control: Full pipe coil EQUIPMENT Manway/Hatch: In the cylinder Outlet: 160 mm Remark: Outlet pipe cut off MATERIAL SPECIFICATION Temperature control system material: Stainless steel Nedpfx Aoyck Ddod Njkt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Top wall thickness: 6.3 mm

Condition: used, tank capacity: 565 l, GENERAL Equipment: Ventilation/air outlet, ball valve Design: Container Remarks: Frame, Fe (galvanized); External diameter: 1,080 mm Internal diameter: 1,077 mm Total width: 1,121 mm Total height: 1,041 mm Total length: 1,121 mm Heating/Cooling: present Location: Outdoor storage Technical documentation: Drawing Nameplate: Volume: 565 liters Cylinder wall thickness: 1.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: unused Cylindrical height: 500 mm TANK Base design: Frame HEATING/COOLING JACKET Internal temperature control: Immersion heater EQUIPMENT Manhole / dome: in the top head (DN 400) Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Feet material: steel Nkodpjyck Agjfx Ad Net

Condition: used, tank capacity: 32,000 l, GENERAL Design: vertical Notes: Electric heating cables around parts of the tank; manway diameter (cylinder) 600 mm; insulation with large cut-outs in insulation and insulation jacket; tank is currently fitted with transport bracing; 1 pipeline inside the tank (see photos) External diameter: 2,480 mm Internal diameter: 2,300 mm Total height: 9,150 mm Heating/Cooling: available Insulation: available Location: Bremen Technical documentation: drawing, static calculations Volume: 32,000 litres Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 7,250 mm Last application: Chemical industry Nksdpfxoyckwwe Ad Nst TANK Support type: legs Number of legs: 3 pieces INSULATION Insulation jacket: bolted Insulation material: mineral wool Insulation jacket material: aluminium EQUIPMENT Manway / access port: in cylinder, in top head (DN 600) Outlet: available Note: Manway cover plated MATERIAL SPECIFICATION Foot material: steel TECHNICAL DATA / DIMENSIONS Top head wall thickness: 6 mm