Used Gas Fired Water Heater for sale (16,349)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 90 kg, total length: 4,900 mm, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, input frequency: 50 Hz, gas tube heater Solaronics TU.E 23 more pieces in stock production year: 2020-22 heat output: 23kw gas burner + exhaust fan pipe length: 2x 4.9 meters G20.1 Nominal connection pressure: 25 mbar Crodpsq Hu Afefx Aiioi Nominal gas consumption: approx. 2.5 m3/h Gas connection: 1/2 " Connection voltage: IP21 AC 230V 50Hz

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Credpfx Aiszc Hkyoioi

Condition: as good as new (ex-display), Year of construction: 2025, PTC CTR-H hot water unit, 95°C, steam 140°C/32 bar, and high-pressure steam 150°C/200 bar (only for the 16 l/min and 350 bar version). Trailer similar but not a Dynajet, Oertzen, Falch, DIBO, etc. - Single-axle trailer with hot-dip galvanized frame, support legs with wheel, parking brake, automatic reverse gear, stand feet, rear lights, and reflectors, drawbar with 50 mm coupling, 13" tires, and ABS. The following hot water models are available: CTR-H 21/200 | 21 l/min at 200 bar | Engine: Kohler KDW702, 12.6 kW CTR-H 20/350 | 20 l/min at 350 bar | Engine: Kohler KDW1003, 19 kW CTR-H 16/350 | 16 l/min at 350 bar | Engine: Kohler KDW1003, 19 kW | High-pressure steam 150°C at 200 bar - Dimensions: 3,045 x 1,390 x 1,190 - Unladen weight: approx. 400 kg - High-pressure pump: Comet RW/TW Premium with integrated gearbox - HD hose reel: manual, max. 60 m 1/2" or 80 m 3/8" hose (included) - Water supply hose reel: manual, 35 m 3/4" hose - Water tank: 200 l - 75 kW heating module - Options such as warning light, automatic hose reel, and accessories available upon request Codpfjfdkaksx Aiiori

Condition: good (used), 100.000L steel tank. Fire / drinking water underground or above-ground Dimensions 16.9 x 3.10m wall thickness: 5mm weight 8mm approx. 12t, weight 5mm approx. 9t. The tanks are sandblasted by us, equipped and then Codpfedbllzex Aiiori painted internally and externally with a corrosion-resistant epoxy resin coating. As standard, the tank has a suction pipe with a suction basket, a breathing chimney, a supply and drain connector, a ladder and a hatch. For an additional fee, we install a float valve and a manhole chimney We can weld additional accessories, e.g. a platform. We have tanks with and without beds. Steel beds for PLN 1800€ net. The tanks have a tightness certificate and a declaration of conformity. We offer delivery to the customer.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 51308589, overall weight: 205 kg, total width: 772 mm, total length: 1,695 mm, total height: 1,090 mm, power: 118.5 kW (161.11 HP), Instruments protected from damage by a special housing. Oil hose connections with quick-release couplings (on both sides). Devices can be stacked and lifted with a crane. Codpfx Aie Ahhppeieri Localized heating for outdoor workplaces and winter construction sites. Heating and ventilation for tents and trade fair events. Heating of workshops, warehouses, craft businesses, and storage rooms. Heating of greenhouses, livestock sheds, and farm buildings. Drying of grain, fruit, etc.

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, trailer coupling, From our immediately available new vehicle inventory, we offer you: TLF 4000 / All-wheel drive on a rugged MAN TGS 18.510 all-wheel drive chassis Here comes our MAN mountain lion! With its 510 hp and the rugged, single-tire all-wheel drive chassis, challenging terrain is its domain. This makes it ideally suited for steep inclines, adverse weather conditions, and areas far from any road. Chassis: • MAN TGS 18.510 4x4 EURO 6 with 510 hp (375 kW) • Automatic transmission • Single tires for maximum off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 PA mountings in the crew compartment Body: • High-quality body construction in a frame design made of rust- and corrosion-free material • 4 flexible and spacious equipment compartments per vehicle side • Swivel walls for maximum storage space • Fold-out steps for each side equipment compartment • Individually customized stainless steel equipment storage according to your requirements • Walkable, non-slip vehicle roof Vehicle pump/fire extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump FPN 4000-10 • PUMP&ROLL capable • Output of more than 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, steplessly adjustable foam mixing system • Water tank 4,500 l with integrated foam tank 450 l • Additional heater in the pump room Firefighting equipment: • High-pressure quick attack system with 50 m of dimensionally stable hose • Remotely controlled foam/water monitor on the vehicle roof • Remotely controlled front monitor • Self-protection system with 4 extinguishing nozzles in front of the tires Cedpfxexl Ab Se Aiiori Safety and lighting • LED light bar on the vehicle roof / 2 LED front flashers • Additional blue light elements on the body • Pneumatic special signal system • Loudspeaker system 100 W with public address unit • Rear view camera • Comprehensive LED lighting in the crew compartment and all equipment compartments • LED ambient lighting on the body and additional spotlights • Pneumatic LED light mast with remote control • Hygiene board on request We would be happy to provide you with a detailed offer and show you the vehicle in detail at our location in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement is not an offer, but rather information. Subject to prior sale!

Condition: used, Reznor UDSA Gas-Fired Air Heater, 54.74 kW, Heating Capacity 5830 m3/h UDSA Gas-Fired Air Heater – Efficient, Even at Peak Performance The most well-known device from REZNOR is the UDSA gas-fired air heater, which ensures uniform air distribution in industrial halls. This air heater, which is easy to install, is available in 14 sizes ranging from 7 to 97 kW and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from the outside or from the hall, as standard. The UDSA gas-fired air heater from REZNOR ensures uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of devices, halls can be heated in a particularly economical way directly – that is, without central heating – using decentralized, modulating gas-fired air heaters. REZNOR UDSA Gas-Fired Air Heater. The advantages: Efficiency of over 92% The device is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust connections, must be carried out by an authorized installation company. The gas-fired air heaters are suitable for: - Natural gas or liquid gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation° control via ECOtronic TN - L° with day-night-week program - Exhaust gas extraction via the roof, version B or C ° - Exhaust gas extraction through the outer wall, version C ° Gas-fired air heater type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural Gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. rated heat input (Hs) QN: 66.04 kW Max. rated heat input (Hi) QN: 59.50 kW Min. rated heat input (Hs) QN: 33.02 kW Min. rated heat input (Hi) QN: 29.75 kW Max. rated heat output: 54.74 kW Min. rated heat output: 26.92 kW Connection voltage: 230V 1N, 50Hz Credpfxewb A Hij Aiisi Air volume flow: 5830 m3/h Protection class: IP20 Part No. 0461BN0677 More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Reznor UDSA Gas-Fired Air Heater UDSA gas-fired air heaters – efficient, even at peak performance. The most well-known product from REZNOR is the UDSA gas-fired air heater, which ensures even air distribution in industrial halls. This easy-to-install air circulation unit is available in 14 performance sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from outside or from the hall, depending on the standard configuration. The UDSA gas-fired air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of equipment, halls can be heated in a particularly economical way – directly, without a central heating system – using decentralized, modulating gas-fired air heaters. Codpfxsx Ihiie Aiisri REZNOR UDSA Gas-fired air heater. The advantages: Efficiency of more than 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust gas connections, may only be carried out by a certified installation company. The gas-fired air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day-night-week program - Exhaust gas extraction via the roof, version B or C * - Exhaust gas extraction through the exterior wall, version C * Gas-fired air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat output (Hs) QN: 17.60 kW Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m3/h Protection class: IP20 You can find more new and used products in our shop! International shipping costs on request!

Condition: used, This pool pellet heating system with hot water tank will be auctioned off online as part of our industrial auction / machinery auction for garden and wellness equipment, trailers, and deposit refund machines. Crsdpfs Adr Hrsx Aiiei You can find this and many other items on our platform.

Condition: excellent (used), mileage: 123,456 km, total length: 5,900 mm, total width: 2,450 mm, total height: 2,160 mm, Water treatment system, 3000 liters Air conditioning Auxiliary heater Deutz engine 20 kW diesel engine Generator 5.90 x 2.45 x 2.16 m Only 100 operating hours Like new! = Further information = Year of manufacture: 1999 Design year: 1999 Credpfx Aiszdryhoiji Model year: 1999 Technical condition: very good Optical condition: very good

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Additional information: Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Current: 16 A Frequency: 50 Hz Cjdpfx Aoy Evirsiijri Number of phases: 3 Motor Full Load Amps (FLA): A Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Minimum heat input: 40,000 Btu/hr

Condition: used, Reznor UDSA Gas-Fired Air Heater UDSA gas-fired air heaters – efficient, even at peak performance The most well-known device from REZNOR is the UDSA gas-fired air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculating air unit is available in 14 output sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from outside or from the hall itself. The UDSA gas-fired air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. With this generation of devices, halls can be heated in a particularly economical way directly – that is, without central heating – using decentralized, modulating gas-fired air heaters. REZNOR UDSA Gas-fired air heater. The advantages: Efficiency of more than 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust connections, may only be carried out by a certified installation company. The gas-fired air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculating air operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage*, controlled via a room thermostat and a heating control switch Cedpfsx Ihg Iox Aiieri - Ventilation, controlled via ECOtronic TN - L with day/night/week program - Exhaust gas discharge via the roof, version B or C - Exhaust gas discharge through the outer wall, version C Gas-fired air heater type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. rated heat input (Hs) QN: 30.08 kW Max. rated heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Auxiliary heater Buderus 2500 kW. Oil + gas. Housed in 20-foot sea container. Crjdpfx Aisx U Eyfsiji

Condition: used, Motan DH-1 N-A/B – Portable Continuous Flow Water Heater You are purchasing a fully functional continuous flow water heater from Motan. This unit comes from Bundeswehr (German Armed Forces) stocks and is in very good condition. Versatile for various applications, e.g., as a pool heater. It’s the perfect solution for quickly heating swimming pools. A 100 m³ swimming pool can be heated to 30°C in just 3 hours. You won't find a faster way to heat the water. Perfect for use anywhere where there is no electricity available. Camping sites, weekend houses, construction sites, and camping. Its effective output is continuously adjustable from 40.5 kW to 128 kW. Despite its high output, the unit is still portable, weighing only 130 kg. Since the water temperature can be set freely within the range of 30°C to 90°C, the unit can be used in many ways, e.g., as a hot water generator for camping shower facilities, for hot water production. Also perfect for Koi ponds. Technical data: Output: 35,000 kcal/h to 110,000 kcal/h, continuously adjustable (40.5 kW to 128 kW) Maximum water flow rate: approx. 3600 l/h Water at maximum heating output. Cedpfxjulgh No Aiiori With maximum water flow, the temperature increase is approximately 30°C, i.e., with a water inlet temperature of 10°C and a 30°C increase. Increase = 40°C final temperature Drive: Two-stroke engine, Fichtel & Sachs, Stamo 75, displacement: 75 cc Output: 2.5 HP at 4500 rpm Consumption: approx. 1.8 l/h, mixture 1:25 (for the engine!) For the burner, depending on the water flow, max.: 24 l/h gasoline at a maximum flow of 3600 l/h Tank capacity: 5 liters Dimensions: Width: 500 mm, Length: 1040 mm, Height: 850 mm Weight: approx. 130 kg Manufacturer's price: €8,000 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 30,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 30,000 liters / 30 m³ Length: approx. 9,940 mm Diameter: approx. 2,000 mm Weight approx. 5,000 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick nozzle. Csdpsvmz Hajfx Aiiori The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 40,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 40,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 40,000 liters / 40 m³ Length: approx. 8,720 mm Diameter: approx. 2,500 mm Weight approx. 6,600 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Crsdpfx Aevmz Idsiisi Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 20,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 20,000 liters / 20 m³ Length: approx. 6,840 mm Diameter: approx. 2,000 mm Weight approx. 3,500 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick nozzle. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. Csdpevmz D Eefx Aiiori The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. Of course, we always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: used, Year of construction: 2015, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 210054, tank capacity: 225 l, usable tank capacity: 200 l, total length: 800 mm, total width: 1,600 mm, total height: 1,020 mm, inner diameter: 1,498 mm, overall weight: 315 kg, wall material: stainless steel, wall thickness: 10 mm, wall structure: double-walled, number of chambers: 1, manhole diameter: 50 mm, manhole location: front, reception height: 250 mm, discharge height: 250 mm, operating temperature: 300 °C, operating pressure: 20 bar, input voltage: 230 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, The Firex Easybratt 200L Gas Variant (BM1G200I) is a heavy-duty industrial tilting bratt pan engineered for bulk cooking, braising, shallow frying, and boiling. While marketed in the 200-liter chassis tier, its precise volumetric breakdown consists of a 225-liter total geometric capacity with a 170-to-200-liter usable working capacity. The comprehensive breakdown of dimensions, weight, and utilities sourced from the manufacturer's technical specifications includes: 📐 Physical Dimensions & Cooking Vessel Overall Width: 1600 mm Overall Depth: 900 mm Overall Unit Height: 1020 mm (with lid closed) Vessel Internal Width: 1498 mm Vessel Internal Depth: 564 mm Vessel Internal Height: 250 mm Cooking Surface Area: 84 dm² 🏋️ Weight & Construction Details: Net Weight: 315 kg. Pan Base Thickness: 10 mm to 15 mm high-thickness compound steel for balanced heat distribution. Chassis & Tank Material: High-grade AISI 304 stainless steel throughout. Tilting Mechanism: This is a motorized model; the suffix is BM1G200I. Lid: Double-skinned, counterbalanced lid with spring loading to reduce heat loss and enable hands-free opening. 🔥 Gas & Burner Specifications: Total Gas Power: 40 kW. Burner Type: High-efficiency stainless steel multi-tube gas burners. Gas Connection Size: 1/2" inlet. Thermostatic Control: Micro-adjustable range between 45°C and 300°C Safety Features: Automated pilot valve safety shut-off; when the tank is tilted/lifted, burners drop down to a pilot-only mode and automatically re-ignite when lowered back into place. Cedpfx Ajz Ad Stjiiori 🚰 Water & Electrical Supply Requirements Water Connection Size: 1/2" cold water inlet Water Supply Pressure: 50 to 300 kPa Water System: Integrated swivel water fill tap built into the top surface for automated pot filling and seamless cleaning. Electrical Feed: Requires a basic 230V / 1-phase supply solely to power the easy-light electronic ignition and internal control array.

Condition: excellent (used), Several 150 m³ steel storage tanks (firewater tanks) installed underground Volume: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted into underground firewater tanks according to DIN 14230: The tank has a firewater suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a gauging port. Furthermore, the tank has a ventilation flange with a cap in a total length of approx. 1,300 mm, suitable for 800 mm of soil cover and 500 mm above ground. - The tank has been emptied, cleaned, and coated with a bitumen exterior coating at the factory. - If required, we can equip the tank with an internal full coating based on bitumen (for corrosion protection) or an epoxy resin internal coating. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will receive the exact freight costs immediately. An inspection is possible at any time by prior appointment. If you require any further information, please call us or send us an email to b.barth (a) barth-tank.de. Codjfnh Tgspfx Aiijri

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Crsdpfxjxhfl Eo Aiioi Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: excellent (used), functionality: fully functional, Electric water heater Maximum power - 18kW Codjvbfvhepfx Aiijri

Condition: used, Year of construction: 2017 Supply voltage: 220 V Serial number: 40390353 2017 Weishaupt WM-G30/3A Industrial Gas Burner – 600–5,700 kW Industrial gas burner mounted on a horizontal cylindrical heating assembly, with blower motor and gas pipework as pictured. Manufacturer: Max Weishaupt GmbH, Germany Model: WM-G30/3A Surface area LxWxH: 8000x2400x2400mm Year: 2017 Serial number: 40390353 Thermal output: 600–5,700 kW Gas connection pressure: 16–500 mbar Electrical supply: 380 V, three-phase, 50 Hz *The factory is still in production, with operations due to cease shortly. The site will be cleaned before collections begin. Control voltage: 220 V, 50 Hz Electrical power: 16.79 kW NOx class: 2 Online auction of detergent processing equipment, soap and powder manufacturing (e.g. SAGAFLUID mixer, AIRJET bag filters, paddle mixers, SIEMENS Milltronics weighing, VEGA level measuring etc.), many s/s storage tanks 5x 100m3, 3x 75m3 etc., workshop and spare parts, logistics, laboratory and offices due to partial relocation and plant closure of the renowned Lagarto Euroquimica at Zaragoza in Spain. The online auction opens Tuesday 3 November and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Tuesday 10 November - Monday 23 November Credpfxe Ahyhhs Aiioi Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: new, functionality: fully functional, empty load weight: 105 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, Technical Data: Condition: NEW Catalog Number: 1.030-500.0 Power Type (Ph/V/Hz): 1 / 230 / 50 Connected Load (kW): 0.3 Inlet Temperature (max.): 50°C Inlet Flow Rate (min.): 400 l/h Water Flow Rate (l/h): 400-1000 Safety Valve Operating Pressure (max.): 200 bar Hot Water Operating Temperature (max.): 95°C Burner Output: 43 kW Heating Oil Consumption (max.): 3.5 kg/h Fuel Tank: 20 L Fuel: Heating Oil EL or Diesel Operating Weight: 105 kg Length x Width x Height (mm): 880 x 680 x 860 Cjdpfx Aisxtc Rceiori Scope of Delivery: Classic Hand Spray Gun - M22 Thread Spray Lance: 1050 mm Hose: 10 m - DN8 - 250 bar - 100°C - M22/M22 Hose (connection between high-pressure cleaner and hot water generator) - 3 m - DN8 - 315 bar - 60°C Durable unit: - The robust frame provides protection during continuous and intensive use. - All parts requiring maintenance are easily accessible. - Integrated fuel filter and the option to remove the fuel tank for cleaning.

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request Cedpfx Aijxk T Efoiori We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: excellent (used), mileage: 41,056 km, first registration: 07/1993, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: mechanical, suspension: steel, total length: 8,000 mm, total width: 2,400 mm, total height: 3,070 mm, = Additional Options and Accessories = - PTO = Notes = WATER TANK AND WATER PUMP PUMP: 1089 OPERATING HOURS READY FOR WORK = Further Information = General Information Year of construction: 1993 Cab: double Technical Information Number of cylinders: 6 Axle Configuration Crjdpfxeyi H Rts Aiioi Suspension: leaf spring Front axle: steered Rear axle: dual tires; reduction: outer planetary axles Weights Unladen weight: 7,550 kg Payload: 5,450 kg GVW: 13,000 kg Condition Technical condition: very good Optical condition: very good Further Information Please contact Thierry Leemans for more information.