Used Heated for sale (15,529)

Year of construction: 2009, condition: ready for operation (used), HRS UNICUS dynamic heat exchanger, manufactured from AISI 304 stainless steel. Equipped with an internal scraping system to increase the heat transfer coefficient and prevent fouling in viscous products. Particularly suitable for: Dedpfxszdkcze Ac Hoci • Fruit purees. • Vegetable purees. • Sauces. • Processed tomatoes. • Vegetable creams. • High-viscosity products. From an industrial production line for purees, in operation until it was dismantled. Additional documentation and photographs available.

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm Dcjdpoykvdljfx Ac Hji (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: reconditioned (used), functionality: fully functional, operating pressure: 140 bar, empty load weight: 94 kg, input voltage: 230 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 558 C Eco HOT WATER PRESSURE WASHER NEW HEATING COIL The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient single-phase motor ensures stable operation even during prolonged use. With operating parameters of 140 bar and 550 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model: HDS 558 C Eco Power supply (V): 230 Capacity (l/h): 290-550 Pressure (bar): 30-140 Max. temperature (°C): 80/155 Connected power (kW): 3.2 Fuel tank (l): 16 Fuel consumption (kg/h): 3 Weight (kg): 94 Dimensions (L x W x H) (mm): 940 x 600 x 740 EQUIPMENT: NEW HEATING COIL Dedszgd Ezspfx Ac Hoci NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and Good access to individual components under the housing makes the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: used, Rittal air/water heat exchanger for the climate control of control cabinets and automation technology. Manufacturer: Rittal Series: TopTherm Type: SK 3210100 Device type: Air/water heat exchanger Condition: used Supply voltage: 230 V AC Frequency: 50/60 Hz Phases: 1~ Rated current: 0.44 A at 50 Hz Rated current: 0.50 A at 60 Hz Power consumption: 0.100 kW at 50 Hz Power consumption: 0.120 kW at 60 Hz Useful cooling capacity: 4.00 kW Measuring point for cooling capacity: L35 / W10 Flow rate of cooling medium: 400 l/h Operating temperature range: 1 °C to 70 °C Cooling medium: Water Maximum cooling medium temperature: 30 °C Operating pressure: 0.1 to 1.0 MPa Operating pressure: 14.5 to 145 psi Protection class: IP55 Weight: 25.5 kg Djdpfx Aezdafmjc Hjci Location: Kusel

Condition: used, Rittal TopTherm Air/Water Heat Exchanger SK 3209500 Rittal air/water heat exchanger for switchgear cabinet climate control. Unit manufactured in 2019. A total of 3 units are available. Dsdpfezdafgox Ac Hsci Manufacturer: Rittal Series: TopTherm Type: SK 3209500 Device type: Air/water heat exchanger Condition: used Supply voltage: 230 V AC Frequency: 50/60 Hz Phases: 1~ Rated current: 0.40 A at 50 Hz Rated current: 0.48 A at 60 Hz Power consumption: 0.095 kW at 50 Hz Power consumption: 0.110 kW at 60 Hz Useful cooling capacity: 2.50 kW Cooling capacity measurement point: L35 / W10 Coolant flow rate: 400 l/h Operating temperature range: 1 °C to 70 °C Coolant: Water Maximum coolant temperature: 30 °C Operating pressure: 0.1 to 1.0 MPa Operating pressure: 14.5 to 145 psi Protection class: IP55 Weight: 23.5 kg

Year of construction: 2021, condition: excellent (used), The SMIPACK BP802 AR 350P is a fully automatic monoblock bundle shrink wrapper with a 90° infeed conveyor and pneumatic sealing bar. It is designed to collate and package bulk products (such as bottles, cans, and cartons) into film only, or pad + film configurations, operating at speeds of up to 20 packs per minute Specifications Djdpfx Acszf Inks Heci Machine Type: Fully automatic monoblock shrink wrapper (90° infeed)Maximum Output: Up to 20 packs/minute Sealing Bar Length: 760 mm Maximum Product Height: 380 mm Maximum Film Reel Size: 750 mm (width) × ∅ 350 mm (diameter) Installed Power: Dependent on region; supports 220-240 V or 380-415 V Machine Dimensions: 3675 mm (L) × 2500 mm (H) × 2105–2265 mm (adjustable H)

Year of construction: 2015, condition: repair required (used), For sale is an industrial water-to-water heat pump from CTA, model OptiHeat 1-65e Duo, with a capacity of 77 kW. Manufacturer: CTA Capacity: 77 kW Year of manufacture: 2015 Dcjdpfx Aexxlwvjc Hji Origin: Switzerland Note: One of the two compressors needs to be replaced. We have the correct replacement compressor available (brand new and unused): Type: Copeland Scroll ZP137KCE-TFD-455 Refrigerant: R410A Voltage: 380–420 V If you are interested or have any questions, we are at your disposal.

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Dcjdjxgdrbepfx Ac Hoi

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, As-new drying chamber, fully functional, immediately available Dcodoy Ny U Tjpfx Ac Hsi

Condition: like new (used), 230V AC / 400W H 19M Dcjdpfx Acozfyylo Hji Application: Machines manufactured by Lenhardt, Bystronic, etc. Length: 60 mm Diameter: 16 mm Weight: 168 g Condition: Like new

Year of construction: 2017, condition: used, machine/vehicle number: AT108, Used COMTEC heating tunnel - year 2017Technical Specifications & Performance DataThis COMTEC bottle heating tunnel is engineered to stabilize bottle temperature immediately after filling by showering containers with warm water. By reducing thermal shock, it helps protect both product integrity and container quality across a wide range of beverage applications. Manufactured in 2017, this second hand unit offers reliable performance for industrial packaging and beverage production environments, and can be integrated within a used bottling line or operate as a standalone temperature-conditioning module.Manufacturer: COMTECYear: 2017Model: 4MQProcess function: Post-filling warm-water spray (rain/shower) bottle heatingPrimary purpose: Temperature stabilization to reduce thermal shock and prevent bottle damageContainer compatibility: Designed for PET and Glass bottlesApplication stage: Downstream of filler, upstream of labeling/packagingOperating mode: Inline continuous tunnel with warm-water recirculation and spray distributionAdvanced Automation & Control SystemsThe tunnel utilizes controlled warm-water distribution to ensure even coverage and consistent temperature conditioning. Standard industrial controls enable operators to manage process parameters, monitor spray performance, and coordinate with upstream and downstream equipment. Integrated safeguards and interlocks support stable operation within modern bottling equipment setups.Centralized operator controls for process managementConsistent spray pattern for uniform bottle surface wettingDesigned for integration with line PLC/HMI architecturesOperator protections with standard industrial safety interlocksProduction Line Integration CapabilitiesEngineered for seamless integration into existing production lines, the heating tunnel connects easily to conveyors and synchronizes with fillers, rinsers, labelers, and downstream packaging machinery. Its post-filling placement makes it suitable for a wide range of formats and production speeds in beverage production and industrial packaging environments.Inline or standalone operationCompatible with typical bottle conveyors and accumulation systemsSupports multi-format operations common to used bottling line upgradesMachine Condition & Maintenance HistoryThis 2017 COMTEC tunnel is presented as a second hand solution in working condition, ready for operation within a modern packaging line. Its warm-water shower process helps extend container handling reliability, providing a practical enhancement to quality and throughput.Operational status: Ready for operationCommercial use: Suitable for integration into a used bottling line or industrial packaging cellOperational Performance & VersatilityThe tunnel’s warm-water shower process supports beverage producers seeking to minimize thermal stress following cold or ambient filling. It is well-suited to a variety of bottle sizes and shapes typical of... Dedjzc Hqgopfx Ac Hjci

Condition: new, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018w25-000298, overall weight: 3 kg, total length: 180 mm, volume flow: 2.5 m³/h, operating pressure: 10 bar, final pressure: 10 bar, power: 6 kW (8.16 HP), input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, Unused stock item: KSB Calio S 25-40. Highly efficient heating and drinking water pump for energy-saving use in heating and drinking water systems. Its compact design and high efficiency ensure a durable and cost-effective solution. Type: Calio S 25-40 Machine number: 29134756 Product number: 2018w25.000298 Nominal diameter: DN 25 Maximum head: 4.9 m Dodpfx Acjv Tm Hfo Hoci Voltage: 230 V Efficient, variable-speed circulation pump Integrated control system for optimized performance

Condition: used, Year of construction: 2008, functionality: fully functional, tank capacity: 35,568 l, usable tank capacity: 35,000 l, total length: 8,100 mm, total width: 2,800 mm, total height: 3,200 mm, inner diameter: 2,500 mm, outer diameter: 2,800 mm, Double-walled steel storage tank with two manholes and insulation, leak detection system. Dodezfqcdjpfx Ac Hsci

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. Dcodsy Nkqxepfx Ac Hji The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Hour counters (heating rods / lamps) Drying phase counter Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Main switch Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit The unit was used in an industrial environment. If you are interested or need more details, please send me a message.

Condition: new, GEA WTT GBS 700M-U-86 Plate Heat Exchanger New, unused plate heat exchanger from stock. Suitable for industrial refrigeration, heat transfer, and process applications. Manufacturer: GEA WTT GmbH Type: GBS 700M-U-86 Part Number: 12509184 Serial Number: 10-120106888-0001 Design: Brazed plate heat exchanger Number of plates: 86 Version: G1, G2, G3, G4 Temperature range: -200 °C to +200 °C Max. operating pressure side 1: 30 bar Max. operating pressure side 2: 30 bar Volume side 1: 9.66 l Volume side 2: 9.89 l Volume side 3: 0.00 l Refrigerant: All refrigerants except ammonia Country of manufacture: Germany Condition: NOS (New Old Stock) Dcjdpfx Aozb Nvijc Hji Location: Kusel

Year of construction: 2014, operating hours: 59,436 h, condition: ready for operation (used), functionality: fully functional, Buderus Loganova EN20 CHP unit – 19 kW electrical / 38 kW thermal – Year of manufacture 2014 For sale is a combined heat and power (CHP) unit from the manufacturer Buderus, type Loganova EN20, from a commercial property in Stuttgart. The unit will be decommissioned as part of an upgrade to the energy supply. Technical data: * Manufacturer: Buderus * Type: Loganova EN20 * Year of manufacture: 2014 * Electrical output: 19 kW * Thermal output: 38 kW * Operating hours: 59,436 h * Start cycles: 6,031 * Maintenance: Premium maintenance contract since commissioning Condition of the unit: The unit starts and runs up properly. Currently, there is a fault in the heat exchanger. According to initial assessment, the heating water pump is defective. The CHP unit is currently out of service. Location & Availability: Location: 70567 Stuttgart Planned decommissioning / dismantling: June–July 2026 Note: Dodpozd Uhhofx Ac Hoci Regularly maintained unit with documented service history. Sale due to a unit upgrade. Inspection possible by appointment. If you are interested, we will gladly send you further information and photos.

Condition: used, Year of construction: 2006, operating hours: 5,126 h, functionality: unexamined, power: 3,500 kW (4,758.67 HP), overall weight: 43,200 kg, Complete oil-fat-fuelled cogeneration unit. ABC 16VDZC-1000 electric engine, AVK DIG150L-6 alternator. Complete system including supervisory management and all peripherals. The entire installation is still assembled as originally configured and can be inspected. Please contact via email. Dodpfx Acoy Hiuqe Hsci

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: Dsdpoy D Hy Esfx Ac Heci • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) • HP steam flow: t/h 40.8 • LP steam flow: t/h 17.3 • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip heating plant with 50 kW heating output, already dismantled. Djdpfxov Ngq Ae Ac Hoci Complete with boiler and chip storage unit, but without chip discharge system.

Year of construction: 2007, condition: used, Circulation pump: Manufacturer Flaco Geräte GmbH, DE-33334 Gütersloh FZPII/D, Art. No. 4020 5780, Mfg. No. 01056 Dsdpfx Aohq Ricsc Heci Performance: Pressure: 9.0 bar, Flow rate: 10 l/min 1-phase, 0.55 kW, 230 V/50 Hz 3.50 A, 1320 rpm, IP 55 Expansion tank: Manufacturer Reflex Winkelmann GmbH & Co. KG, DE-59227 Ahlen Reflex No. / Mfg./Serial No.: 06G05194002, prEN 13831 2000 Permissible operating temperature: -10/120°C, Max. continuous operating temperature of the diaphragm: -10/70°C, 1.5 bar initial pressure (factory setting/site setting), 3.0 bar permissible Operating overpressure, 18 liters nominal volume.

Condition: new, XPLAN is the result of nearly 50 years of Incoplan’s experience in providing a highly efficient and energy-saving method for drying wood, worldwide, in all climate conditions. Compared to conventional air exchange systems, condensation drying with XPLAN requires approximately 60% less electrical energy. This is a gentle drying method, particularly suitable for hardwoods and softwoods, allowing their characteristics to be preserved. XPLAN is available in 3 versions: LITE, up to 10 m³ STANDARD, with additional fans for tunnel structures PRO, up to 20 m³ of wood. Dsdew Ug Atspfx Ac Hoci Build or purchase your own structure, install and connect XPLAN, and start your drying process. We provide a complete design for the ideal chamber to be built, material suggestions, and all the information you need. The images show the three versions, with suggestions for the homemade chamber structure and walls. The electrical cabinet is always included and connected to the machine. The software is automatic, touchscreen-operated, and contains several preloaded drying programs. TECHNICAL DATA SPECIFICATION COMPRESSOR NOMINAL HP 1.5 kW SHIPPING WEIGHT 154 kg AUXILIARY HEAT 4 kW INTERNAL BLOWER MOTORS 0.25 kW motor; airflow 3,060 m³/h HEAT TREATING CAPABILITIES Yes, up to 71° C (only with Heat booster) CIRCULATING FANS 2 included: 400 mm fans, 0.25 kW, 3,060 m³/h each POWER REQUIREMENTS 5.8 kW (28A) - 400 V 50 Hz (1-phase) DIMENSIONS (H X L X W) 94 × 83 × 52 cm (base unit only) 1 power vent system included (includes exhaust and intake) DRYING TIME 25mm Green Pine - 80% to 8% in approximately 12 days. 25mm Green Oak - 65% to 8% in approximately 35 days. LOAD CAPACITY For softwoods and fast-drying hardwoods (Pine or Poplar) 3-5 m³ For slow-drying hardwoods (Oak) 10 m³ NOMINAL WATER REMOVAL RATE 114 kg per 24 hours - 5 l/h

Condition: new, Year of construction: 2023, Due to a planning error, I am selling a new, originally packed cantilever discharge system for a Fröhling heating system Dedpfxeuq Iy Re Ac Hoci for 6 m room size with 1 m auger extension with separate drive for screw and turntable as 2 motors, ideal for 2 boilers Photo is from another system as mine is still packed

Condition: used, Year of construction: 2001, Mawera wood chip heating system FU 350 RIA, underfeed firing system, output 350 kW, year of manufacture 2001, including feed screw with flashback protection, including control system, including dust collector with flue gas fan. System is fully functional; hopper discharge system is not included! Dsdpfxsvyrwps Ac Hsci

Condition: used, Year of construction: 2004, Wood chip heating system Mawera FSR 1100, output 1000 kW, max. operating temperature 110°C, year of manufacture 2004, including hydraulic connection unit, including multi-cyclone separator, including ash removal to the basement, including control system, photos of the pneumatic cleaning system show the condition as new. Dcjdpfx Aovgf Iboc Hji Dismantling must be carried out by the buyer; a forklift is available, and the system can be rolled out as a single unit.

Year of construction: 2026, condition: as good as new (ex-display), Vacuum membrane press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive, thereby increasing performance. Possible applications: Veneering / Form gluing / Covering... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of curved and laminated components The heating system is equipped with temperature control Rubber membrane 2.5 mm Tabletop is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump flow rate: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Available from stock in 54634 Bitburg Dedpjdvltyefx Ac Hjci - free loading -