Used Messersi Tch 1500 for sale (5,484)

Year of construction: 2025, operating hours: 1 h, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. Bledpfx Aoyaal Sjafoc A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: used, functionality: fully functional, Vertical strapping machine Blsdpsxqfbrofx Aafsc

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: new – warehouse stored (old stock), no signs of operation. Factory-prepared, secured, complete with warning plates. Identification details (nameplate): • Manufacturer: Copeland • Type: D9RS/1500/EWM7000 • Part number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration system / air conditioning • Configuration: Block 1 • Start-up: U. Direct start (Direktanlauf) • Equipment: crankcase heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz Bodoyga Utepfx Aafslc • Speed: 1450 rpm • Displacement: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max operating current (MRA): 28.8 A • Max working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Protection class: IP54 • Year: 1996 Recommended oil: • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new spare part, for modernization of refrigeration or air conditioning installations. Sale as shown in the pictures.

Condition: excellent (used), Year of construction: 2000, Planetary mixer Oru 2250/1500 - year 2000 - 1.5cmb ready concrete - 75cbm/h - 5 aggregate bins with weighting belt - Siemens 7 control - construction of the mixer - skip - cement weight Bljdpfx Aaoyf Dywefsc - water weight - additive weight - 2 cement screws included

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, HESS RH 1500 2.1 SVA Year of manufacture: 2008 Start: 2009 Bedpjyb Rvkofx Aafslc Very good technical condition. Operating until the end of January. In 2022 a new roller for the upper hopper was installed by Topwerk - Hess. Vibrating table completely overhauled Siemens S7 control 3 molds included Price 195000euro Machine is located in Slovenia

Condition: used, functionality: fully functional, Year of construction: 2008, Automatic Vertical Strapping Machine VR 88 Year of manufacture: 2008 Machine type: VR88 Machine number: 3177 The automatic vertical strapping machine VR 88 is ideally suited for strapping pallets. It is suitable for integration into both powered and non-powered conveyor systems. The lower lance enables the strap to be fed through the pallet. During tensioning, the strapping head moves horizontally to compensate for tolerances, ensuring consistent strap tension and high stability. The system control program allows for single or multiple strapping cycles, depending on the specific packaging requirements of the customer. The machine has been fully overhauled by us and is in fully functional condition. Technical Data Power supply: 230 V / 400 V / 3 Ph / 50 Hz Power consumption: 3 kW Strap types: PP or PET Strap width: 12 mm Strap thickness: 0.6 – 1.0 mm Strap tension: up to 200 kg (optionally up to 500 kg) Seal type: Hot-wedge welding Sealing time: approx. 1 – 3 s, depending on strap type Strap feed speed: 2.5 – 5.5 m/s Strap retraction speed: 2.5 – 5.5 m/s Strap tensioning speed: approx. 0.25 m/s Blodpfx Aex Ta Saeafjc Strap dispenser: 405 mm core Strap frame: 1,200 × 1,600 mm (can be rebuilt for a clearance height of 2500 mm) When installed at the customer site, a 6-month warranty is available.

Condition: excellent (used), approx. 1500 m² 1-storey steel construction platformUsed goods, good condition, see picturesManufacturer STOWLength approx. 58.5 mWidth approx. 54.6 mHeight Lower edge 3.4 mHeight Upper edge 3.7 mUp load 500 kg/m²C-profiles and Sigma-profiles and Sigma-profiles fastenedwith screws and nutsRaster distances adjustable in lengthFloor structure is 38 mm chipboard, highly compacted, groove and tongue underside white, upper side grey coatedNegotiation price: Offer on request!Partial sale possible!disassembled and loadedWare in stock.transport costs possible on request.inspection possible at any time by appointment.further information on request.over 5000 linear metres of pallet racks from numerous manufacturers in stock. (Changes and mistakes in the technical data, data and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT ex stock) Purchase / sale We are looking for, or constantly offer numerous items from various areas broom-clean business clearance business closures quick - flexible - ready for action! We also clear and or dispose of for liquidators. Write to us with some keywords and we will get back to you as soon as possible. To get to our site, please click on our logo! Bljdpfxed S S N Rj Aafjc

Condition: like new (used), 1500 m² storage platform Schäfer R3000 3-story used, top condition, as new, see pictures Bledpfjhzw Hiex Aafec Ground floor storage platform steel construction, above 2 floor shelf system Schäfer Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTX26200912, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Bodpjyap Shofx Aafelc Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: ready for operation (used), Year of construction: 1983, operating hours: 6,348 h, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, drill diameter: 50 mm, The machine was overhauled in 2009! TECHNICAL DETAILS Drilling depth: 1,500 mm Drill diameter: 5 - 50 mm Travel X-axis: 1,250 mm Travel Y-axis: 900 mm Travel Z-axis: 900 mm Table length: 1,000 mm Table width: 1,000 mm Max. table load: 3,000 kg Spindle speed: 100 - 6,000 rpm Spindle taper: SK 40 MACHINE DETAILS Control: Siemens 802 D Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,600 x 2,000 mm Weight: 6,000 kg Operating hours: 6,348 h Bedpjyfhciofx Aafjlc

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor Blsdpfx Ajyg I Ihoafec • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration Bsdpfxjyg I Ege Aafjlc • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,500 mm, travel distance Y-axis: 680 mm, travel distance Z-axis: 670 mm, total height: 2,700 mm, overall weight: 5,350 kg, spindle speed (max.): 8,000 rpm, product length (max.): 5,440 mm, number of axes: 3, This 3-axis MICROCUT Challenger VM-1500 was manufactured in 2007. It features a table size of 1,500 x 660 mm, capable of handling a maximum weight of 1,000 Kg. The machine offers X, Y, and Z travels of 1,500 mm, 680 mm, and 670 mm respectively, with a rapid traverse rate of 20 m/min. It includes a BT 40 spindle taper and a spindle speed up to 8,000 rpm. Contact us for more information about this machine. • Table dimensions: 1.500 x 660 mm • Max. table weight: 1.000 kg • X/Y/Z rapid traverse: 20 m/min • Tools station: 24 positions • Max. tool diameter: 80 mm (150 mm) • Max. tool length: 300 mm Technical Specification Blsdpfx Asyg Hapoafec Taper Size BT 40

Condition: new, PRICE: 1500 EUR Automatic slicer Ital Form Bsdpfx Aaeuu H Dpefjlc Dimensions: 480x650x530mm Electric power: 0.37 kW Voltage: 220V 50Hz Cutting thickness: 0-6mm Blade diameter: 300mm Weight: 65 kg

Condition: new, The RSM 1500 C, a precision cylindrical grinder from KNUTH, is designed for long and heavier workpieces within the Conventional Cylindrical Grinders category. This robust machine features a large machine bed that supports workpieces up to 2000 mm in length and 320 mm in diameter, ensuring maximum accuracy and stability. Wide, precision-ground guideways contribute to reliable performance, while the grinding spindle with hydrostatic bearings guarantees high precision and surface quality. The powerful motor allows for continuous operation, making it ideal for both individual parts and small series production. Operators can benefit from adjustable dwell times and precise micro-feed control, enhancing the grinding process. With an integrated internal grinding device, the RSM 1500 C offers exceptional flexibility. If you're looking for a reliable solution for cylindrical grinding, request a quote or buy now to experience the efficiency of this powerful Conventional Cylindrical Grinder from KNUTH. Bjdsu E N Dnopfx Aafslc

Condition: ready for operation (used), total height: 2,110 mm, total width: 2,240 mm, total length: 900 mm, passage width: 1,500 mm, power: 2.2 kW (2.99 HP), empty load weight: 1,250 kg, load capacity: 125,000 kg, width of table: 420 mm movable cylinder electro hydraulic two speed: fast slow Bodpfx Aajygyyisfjlc Max ram adjustment: 400 mm Drawningspeed: fast 9mm/sec - slow 2,5 mm/sec Returningspeed: 12 mm/sec Max distance between table - ram: 925 mm Courant needed: 380/400V

Condition: new, Distance between centers 1500 mm Max. swing over bed 560 mm Max. swing over carriage 350 mm Max. swing in gap 788 mm spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Travel cross slide 326 mm Travel top slide 130 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Bsdpfxjygxb Ej Aafjlc

Condition: new, overall weight: 1,970 kg, total height: 1,700 mm, total width: 1,080 mm, total length: 2,700 mm, Distance between centers 1500 mm Max. swing over bed 460 mm Max. swing over carriage 270 mm Max. swing in gap 690 mm spindle bore 80 mm Bledpfx Aeygw T Heafoc Spindle Taper Camlock D1-6 Spindle speed 25 - 1700 1/min Travel cross slide 290 mm Travel top slide 120 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2024, total height: 2,500 mm, overall weight: 3,700 kg, This laminating press was manufactured in 2024. It features a robust servo-hydraulic drive system and operates at pressures between 6-8 bar. With a substantial footprint of 1000 × 2500 mm and a working table size of 1500 × 1000 mm, it is ideal for panel processing and interior components. Consider the opportunity to buy this Other COMAG MPM 1500-1000 T6-E laminating press. Contact us for more information. • Pneumatics and hydraulics: • Operating pressure: 6–8 bar • Drive system: Servo-hydraulic drive Bljdpfx Asyglkmsafec • Electrical data: • Electrical connection: 3 × 400 V / 50 Hz • Number of phases: 3L • Maximum power: 30 kW • Maximum current: 100 A • Applications: • Laminating, punching, and edge folding of panels • Trimming and edge foiling of panels • Processing of armrests and central armrests • Production of railings, handles, back covers, and door handles • Typical use: Ideal for panel processing interior components; also suitable for the furniture industry Dimensions Machine Depth 2500 mm

Condition: used, Year of construction: 2010, operating hours: 15,000 h, machine/vehicle number: M312, Technical Specifications and Performance Data This pre-owned monoblock is manufactured by Omar and integrates drying, capsule application, and self-adhesive labeling functions into a compact rotary system designed for professional beverage production. The machine is equipped with a double capsule applicator with rotating heads for precise capsule application and three self-adhesive labeling units for front, back, and neck labels. It is ideal for presenting high-quality wines and can be integrated into a used bottling line or as a stand-alone module in an industrial packaging environment. Manufacturer: Omar Model: Simphony Washer-Dryer Year: 2010 Configuration: Drying module + double capsuling unit with rolling heads + 3 self-adhesive labeling stations (front/back/neck) Bottle Formats: Compatible with Bordeaux and Burgundy bottles Label Application: Pressure-sensitive (self-adhesive) for front, back, and neck Container Type: Glass bottles Format Examples: Reference capacity 0.5 L Application: Suitable for integration into beverage production lines and industrial filling Advanced Automation and Control Systems The monoblock is designed for synchronized operation of the drying, capsuling, and labeling units. The self-adhesive labeling stations ensure precise application with fine adjustment for front, back, and neck labels. The double capsuling stations with rolling heads ensure consistent finishing quality on wine capsuling units. Rapid mechanical adjustments support the changeover from Bordeaux to Burgundy bottles, improving production flexibility in existing bottling lines. Production Line Integration Capability Designed for in-line operation, the unit interfaces upstream with fillers and capping/closing machines and downstream with inspection and packaging equipment. It adapts to standard conveyor logistics, enabling smooth transfer of glass bottles. Format changes between compatible wine bottle geometries are supported, making the machine suitable for multi-SKU beverage production. Machine Condition and Maintenance History The machine has undergone a thorough restoration, which included purchase, transport, and recommissioning, resulting in a fully functional and reliable second-hand asset. It is ready for use in a production setting, suitable for rapid integration into an existing bottling line. Operational Performance and Versatility Optimized for glass wine bottles, the monoblock combines drying, precise capsule application with rolling heads, and three-point self-adhesive labeling. This configuration supports premium packaging standards and is suitable for wineries and beverage producers seeking consistent presentation quality in an industrial packaging environment. Installation Requirements and Site Preparation The rotary machine’s compact footprint allows for easy placement within typical bottling rooms. Connection to existing conveyor belts and utilities is recommended for optimal integration. The site layout must allow for safe operator access around the guards and clear spaces for format changeovers and routine maintenance. Certification of Conformity and Safety Standards Bjdpfx Aaoygh I Usfjlc The monoblock includes protective guards around the moving units, with standard operator guards and emergency stop functions typical of modern bottling...

Condition: excellent (used), Year of construction: 2014, ARBURG A 1500 T 1600-400 rotary table (29.279 h) (S&P 3786) Manufacture year: 2014 Operating hours: 29,379 Stunden Screw: 35 mm Injection pressure: 2500 bar Bodpfx Ajyg Ivxjafolc Stroke volume: 154 cm³ Clamping Force: 150 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4600 x 1900 x 2300 mm Eeight: 11000 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 4 x Corepuller, Airvalve, Interface Colorizing, Interface Robot etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, functionality: fully functional, The screw separator is available for sale Bjdpfx Ajyg Hp Reafslc Length: 900 mm Profile: 6 mm high Roller diameter: 100 mm Speed: adjustable Mobile design

Condition: as good as new (ex-display), The Numturn 500/1500 FA is a precision CNC Flat Bed Lathe designed for a wide range of applications, making it an excellent choice for the CNC Flat Bed Lathes category. With a robust construction featuring heavy ribbing of the machine frame and wide hardened V-guides, this lathe is engineered for heavy-duty machining. The Fagor 8055i control enhances your workshop programming experience, while the automatic 8-station servo-driven tool turret significantly increases productivity and flexibility for both single part and small batch production of larger workpieces. Its hydraulic power chuck offers adjustable holding force, and the heavy-duty tailstock provides high clamping force for secure machining. The completely lockable enclosure and smart central lubrication system contribute to a low-maintenance operation, allowing for more efficient workflows. KNUTH leads the way in reliability and performance, so if you're looking for a CNC Flat Bed Lathe that delivers robust construction and precise functionalities, you can request a quote today. Bjdpfx Aom E Ty Njafslc

Condition: used, Year of construction: 2018, control CELOS / F31iB5 / Mapps 4S max. turning diameter 670 mm turning length 1.538 mm bar passage max. 81 mm x1 axis 675 mm y-axis mm z1 axis 1.562 + 164 mm b-axis ° a-axis 1.542 mm x2-axis 200 mm y2-axis + / - 40 mm z2-axis 1.542 mm max. turning speeds 4.000 U/min power capacity 26 / 22 kW spindle passage Ø 91 mm max. turning speeds 5.000 U/min power capacity 22 / 18,5 kW spindle passage Ø 73 mm turning speed range 0 – 12.000 U/min power capacity 28/ 23 kW tool taper Capto C6 number of tool places 76 Pos. max. tool diameter Ø 70/ Ø 130 mm max. tool length 400 mm max. tool weight 8 kg Number of tool holders 10 pos. Shank length for square tool 20 mm Shank diameter for boring bars Ø 32 mm power capacity 5,5/ 5,5/ 3,7 kW torque 16,9/ 13,1/ 8 Nm Bjdpfxsyfh R Hj Aafolc x-axis 50 m/min y-axis 40 m/min z-axis 50 m/min A-axis 36 m/min x2-axis 25 m/min y2-axis 18 m/min z2-axis 40 m/min b-axis 100 U/min Hollow clamping device Ø 67 mm Number of working hours ca. 23.250 h spindle hours ca. 8. h Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. Technische Merkmale & Zubehör: - Kitagawa- Hohlspannfutter an Haupt- und Gegenspindel - Fußschalter (doppelt) für Spindel 1 und Spindel 2 - Vollindexierung der Werkzeugspindel - Revolver- Reitstockfunktion - Geeignete Kühlmittelart: Wasserlösliches Kühlmittel - Späneförderer - Kühlmittelsystem 70 bar, Fabr. Hydrajet - Blasluft an der Spindel 1 und Spindel 2 - Automatischer Messarm an der Hauptspindel - Werkstückauswurf an der Spindel - Teileentlader - Vorbereitung für Stangenlader - Schnittstelle für Nebelabscheider - 2 Stk. RotorClear - Signalleuchte 4 Farben - Multi-Dry-Filter - Automatisches Antasten und Werkzeugkorrektur - Speichererweiterung - Zyklus für Ebenentransformation - Kühlmittelspritzpistole Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Condition: new, pressure 200 t stroke 400 mm daylight longitudinal/sideways 1490 /400 mm dayligth 900 mm Blsdpjygxz Esfx Aafjc liter capacity 22 l Motor output 7,5 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,67 x 1,0 x 2,5 m Presses can be operated both by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking 2 year guarantee