Used Heated for sale (15,428)

Year of construction: 1998, condition: excellent (used), table height: 2,250 mm, table width: 4,000 mm, Extra large heat press! Dsdpfowfp R Ajx Ab Towf For sale in excellent technical condition.

Condition: good (used), Used electrically heated pressure vessel with agitator Dwjdpjd Dwi Hjfx Ab Tef Item number: 10256 Last use: Chemistry Volume: 280L Type: Upright on feet Material (wetted parts): 1.4301 stainless steel Bottom: dished bottom Top: dished bottom with flange ring Operating pressure according to type plate: +3Bar Operating temperature: Max. 90°C Tank dimensions: Inner diameter: 560mm Outer diameter: 580mm Height of the feet: 260mm Distance from drain to floor: 365mm Total height: 1540mm Materials: Interior: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Equipment: Double jacket around cylinder and bottom electrically heated Agitator in upper base, speed adjustable Top floor completely removable Various connections Sight glass in cylinder

Year of construction: 2016, condition: new, Gas heated tempering furnace type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C circulation fan: 4,0 kW loading weight: 3.000 kg gross Djdjcdixlopfx Ab Tewf

Condition: good (used), Used pressure vessel / Electrically heated SKU: 10407 Last use: Cosmetics Volume: 695 litres Type: Standing on 3 feet Material (media contact): 1.4404 stainless steel Design: Single-walled / Insulated / Electric Heating Manhole: 345mm Bottom: Curved Upper floor: Curved Operating pressure according to type plate: - 1 / +3 bar Test pressure according to type plate: 8 bar Maximum operating temperature: +152°C Dimensions of containers: Outer diameter: 820mm Cylindrical height: 1220mm Height of feet: 750mm Distance outflow to ground: 800mm Total height: 2040mm Total width: 1000mm Materials: Inside: 1.4404 / AISI316L Exterior parts: 1.4301 / AISI304 Facilities: Dwodpfxod R Hgke Ab Tof Nameplate: yes Outlet: DN 65 Various connections Isolated Electrically heated Actuator

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Superheated water boiler at 152°C, 1 Gcal/h, automatic feed, year of manufacture 2014 – manufacturer Sceat Italia - Heat output: 1,000,000 kcal/h - Pressure: 4 bar - Superheated water temperature: 152°C - Equipped with control thermostat, safety thermostat, thermometer - Working pressure: 4 atm - Fuel: wood waste, sawdust - Flue gas evacuation system: cyclone, forced draft fan, connection ducting - Furnace: lined with high alumina refractory bricks – prepared for wet materials from processing. Special refractory bricks laid with high alumina content cement, suitable for high humidity – optimized for the combustion of sawdust from log cutting Flue gas extraction system - Belt-driven fan Djdpfx Aow Ewafob Towf - Multicyclone separator - Connecting ducts: boiler-multicyclone, multicyclone-fan, fan-chimney - Chimney Included accessories - 2 safety valves - Cast iron discharge valve - Operating thermostat - Safety thermostat - Thermometer - Safety pressure switch - Pressure switch guard - Manometer with 3-way valve - Alfa 10 diameter 50 discharge valve Flue gas removal system - Cyclone for collecting solid combustion particles before flue gases are released into the atmosphere - Smoke extractor/fan to improve combustion by increasing draft in the boiler, essential if a smoke treatment system is present or when significant flow losses occur - Painted carbon steel alloy connection ducts between boiler and multicyclone, and between multicyclone and fan - Electrical panel serving the feed electropump, static level, pressure switches, minimum level probe for the smoke extractor fan, and all devices serving the generator - Chimney made of carbon steel

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91132846, Year of construction: 2018, operating hours: 8,616 h, Collection of the forklift is possible from 06/01/2026. The mast will be dismantled by the manufacturer prior to transport. The technical data is taken from the original offer document. The seller cannot accept any liability for this information. TECHNICAL DETAILS Load capacity: 1,600 kg Load centre distance: 600 mm Mast type: DZ-V mast Lift height: 10,700 mm Mast height, retracted: 4,100 mm Free lift: 3,456 mm Mast height, extended: 11,344 mm Fork tilt forward: 2° Fork tilt backward: 5° Fork length: 1,150 mm Fork dimensions: 40 x 120 x 1,150 mm Width between support arms/loading area: 940 mm MACHINE DETAILS Overhead guard (cabin) height: 2,263 mm Overall width: 1,282 mm Battery voltage: 51.2 V Tyres: Ø 343 x 114 Operating hours: 8,616 h EQUIPMENT ISM Online ETV 216i Drive & liftPLUS equipment package Drive wheel, 140 mm wide Load wheel cover Panoramic driver’s overhead guard Dwedpfexywitjx Ab Tjf Panoramic rear-view mirror Blue floorSPOT lighting M-Device; including 2 adapters Video; video pre-installation Seat: leather MSG20 with 3-stage heating Voltage converter; 125 W, 48/24 V Battery: Li-ion 51.2 V, 360 Ah, type IM Charger: SLH300 D400 48 V 150 A

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, empty load weight: 13,200 kg, working width: 1,100 mm, workpiece height (max.): 35 mm, working length: 2,350 mm, machine/vehicle number: 8081.02, TECHNICAL DETAILS Working length: 2,350 mm Working width: 1,100 mm Max. machinable thickness: 35 mm Part dimensions max. Max. panel size: 1,100 mm × 2,350 mm Film width min. Min. film width: 1,300 mm MACHINE DETAILS Dedoxyi Rpjpfx Ab Towf Installed power: 38 kW Dimensions & weight Heating plate dimensions (W × L): 1,400 mm × 2,600 mm Usable surface (W × L): 1,180 mm × 2,430 mm Weight: 13,200 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,650 bar, ejector force: 61,000 N, Injection moulding machine, function-tested and immediately ready for operation by an Engel specialist technician! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 1,300 kN Screw diameter: 55 mm Shot volume: 510 cm³ Injection pressure: 1,650 bar Ejector force: 61,000 N Ejector stroke: 150 mm Platen length: 750 mm Platen width: 750 mm Opening stroke: 600 mm Screw length: 20 l/d Minimum mould installation height: 300 mm Maximum platen distance: 900 mm Daylight: 900 mm MACHINE DETAILS Control system: CC200 Power supply type: Three-phase current Input frequency: 50 Hz Input voltage: 400 V Dimensions & Weight Dwsdpfoxzfkbjx Ab Tjf Machine dimensions (L x W x H): 5.8 m x 1.7 m x 2.3 m Total weight: 9,500 kg Operating hours: 24,896 h EQUIPMENT Documentation/manual Display language: German CEE socket 16A Hydraulic core pull 1x Water manifold Levelling elements EUROMAP 67 interface Interface for ejector plate monitoring Schuko socket 10A Mould heating 8x Note: The machine is sold without material hopper and safety guarding.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, empty load weight: 1,500 kg, workpiece weight (max.): 750 kg, machine/vehicle number: F101, TECHNICAL DETAILS Pump output: 5.5 kW Dwedpfx Absxztt Ds Tef Heating element output: 4.2 kW Rotary basket load capacity: max. 750 kg Compressed air connection: max. 10 bar MACHINE DETAILS Unladen weight: approx. 1,500 kg Electrical connection Connection: 400 V Current consumption: 63 A Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 130 mm, displacement volume: 6,172 cm³, injection pressure: 1.296 bar, plate width: 1,700 mm, plate height: 1,704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Tool opening force, max.: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate (h x v): 1,704 x 1,700 mm Clear width (h x v): 930 x 930 mm Tool opening stroke: 1,150 mm Tool installation height, min.: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force forward/backward: 226 kN Injection unit Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Displacement: 6,172 cc Shot weight (PS): 5,617 g Injection flow: 1,540 cc/s Screw speed: 138 rpm Plasticizing flow: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment Nominal pump motor power: 132 kW Dedpfx Abox Dbtws Tswf Installed heating power: 70 kW Cylinder heating control zones: 7 MACHINE DETAILS Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg EQUIPMENT - Oscillating elements - 1 x air valve - 2 x hydraulic core pull on BFAP - 2 x hydraulic core pull on FFAP - 8 x hot runner control points - Robot interface according to Euromap 67

Condition: like new (used), Year of construction: 2015, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Transmatic 7360 Sport, input voltage: 400 V, type of input current: three-phase, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, MAKE: TRANSMATIC MODEL: 7360 SPORT CONDITION: VERY GOOD YEAR: 2014 POWER SUPPLY: 400v 3PH AIR SUPPLY: YES NOTES: *3 MODES * ROLL TO ROLL FABRIC *ROLL PRINT TO PIECE FABRIC Dwsdpfjv Dpyvjx Ab Tjf *ROLL FABRIC TO PIECE PRINT Designed for digital printing on cut pieces, placed prints, traditional roll-to-roll printing. This application is especially suitable in the sports T-shirt printing industry. A new oil heating system ensures uniform temperature distribution over the entire length of the cylinder with minimal energy consumption. Transmatic’s oil heating systems consume 50% less energy than electric machines.nThis calender has 3 different ways of operation. 1)Transfer papers are placed with the design facing upward on the table. Cut fabrics (fronts, backs, arms, necks, etc.) are placed on top of the pattern. The printed fabric pieces and paper leave the machine via a rear conveyor belt. 2)Use of roll transfer paper with the ability to place cut pieces of fabric. 3)Traditional printing of both transfer paper and fabrics in continuous. Electro-pneumatic felt guide control. No.6 3″ quick-connect shafts. Three friction-driven and three friction-driven and motorized rewinders. Reversing safety bar. n One outfeed conveyor belt cools and carries the printed pieces to the back of the machine to detach them. Automatic machine shut-off system after felt cooling Digital adjustable speed control. Requires compressed air.

Year of construction: 2017, condition: ready for operation (used), Additional Equipment Mold temperature control Automatic activation lamp Automatic last rotating Dedpfxex D Scve Ab Tjwf Automatic mold slider closing Measurement & quality control tools This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: Dodpfx Ajwka Nyeb Towf - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: ready for operation (used), Year of construction: 2005, operating hours: 64,218 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, TECHNICAL DETAILS Clamping force: 2,000 kN Screw diameter: 50 mm Tie bar distance: 520 mm Shot volume: 392 cm³ Injection pressure: 2,000 bar Mould height (h x v): 520 x 520 mm Platen size (h x v): 728 x 728 mm Minimum installation height: 250 mm Maximum platen opening: 900 mm Opening stroke: 650 mm MACHINE DETAILS Control system: Selogica Dimensions & Weight Dsdpfx Ajxzfh Tjb Tswf Machine dimensions (L x W x H): 5.45 m x 1.95 m x 2.1 m Total weight: 7,300 kg Operating hours: 64,218 h EQUIPMENT Screen language: German CEE socket 16A Hydraulic core pull 1x Pneumatic core pull 1x Air valve 1x Water battery Levelling elements EUROMAP 12 interface Interface for handling Schuko socket 10A Mould heating 12x Note: Machine is sold without material hopper.

Condition: good (used), mileage: 637,245 km, power: 309 kW (420.12 HP), first registration: 10/2008, fuel type: diesel, color: white, axle configuration: 6x2, tire size: 385/65R22,5, fuel: diesel, wheelbase: 49,000 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro5, suspension: steel-air, Year of construction: 2008, Equipment: crane, cruise control, navigation system, trailer coupling, - Aluminum fuel tank - Rear work lights - Brake booster - Electric windows - Electronic Braking System (EBS) - Electronic Stability Program (ESP) - Leather interior - Leather upholstery - Fog lights - Beacon light - Reversing camera - Seat heating - Sun visor - Stability control - Toolbox Dedpfx Asx Emnxeb Tswf - Xenon lighting - Power Take-Off (PTO) - Central locking 1x Scania P420LB6X2*4HNA, Euro 5, Opticruise, 637,245 km, Incl. Palfinger 23 T/m, Year of manufacture 2008, air conditioning, reversing camera, electric windows and mirrors, first registration, Webasto (auxiliary heater), Suspension: steel/air, ABS, total length: 9,200 mm, total width: 2,520 mm, wheelbase: 4,900 mm, tires: 385/65/22.5 (50%) at the front and 315/80/22.5 (80%) rear, radio/CD player, aluminum fuel tank (350 liters), TÜV inspection at 627,500 km (15.08.2025), the truck is clean and fully operational! Crane: Palfinger PK23002 (5 hydraulic extensions), incl. jib, year 2008, remote control, ... all in excellent condition! Valid TÜV inspection until 03/2026. Price: €42,500, Stockholm, Sweden. For more information and photos, please contact us by phone or email. We are also available via WhatsApp and Viber. • We speak English * Vi talar svenska * Mówimy po polsku * Hablamos español * • We speak Ukrainian * We speak Russian * Vorbim în limba română * We speak German * ----- * Shipping costs for this truck to various destinations * ----- * Stockholm (Sweden) – Gdansk (Poland) €450.00 * Stockholm (Sweden) – Antwerp (Belgium) €1,450.00 * Gothenburg (Sweden) – Kiel (Germany) €450.00 * Gothenburg (Sweden) – Ghent (Belgium) €590.00 * Gothenburg (Sweden) – Zeebrugge (Belgium) €590.00 * Gothenburg (Sweden) – Antwerp (Belgium) €850.00 * Gothenburg (Sweden) – Naples (Italy) €4,000.00 * Gothenburg (Sweden) – Bilbao (Spain) €3,500.00 * Gothenburg (Sweden) – Barcelona (Spain) €4,000.00 * Gothenburg (Sweden) – Leixøs (Portugal) €2,500.00 * Gothenburg (Sweden) – Piraeus (Greece) €3,000.00 * Gothenburg (Sweden) – Iquique (Chile) €4,000.00 * Gothenburg (Sweden) – Jebel Ali (UAE) €4,000.00 * Gothenburg (Sweden) – Sohar (Oman) €4,000.00 * Gothenburg (Sweden) – Jeddah (Saudi Arabia) €4,000.00 ----- * These rates apply exclusively to the purchase of this truck. * ----- _____ _____ Driveline AdBlue system: Yes Fuel tank: 350 liters Axle configuration Brakes: Disc brakes Front axle: Tire size 385/65R22.5; Max. axle load: 9,000 kg; Steered; tire tread left: 50%; tire tread right: 50%; suspension: leaf spring Rear axle 1: Tire size 315/80R22.5; Double tires; Max. axle load: 11,500 kg; inner left tire tread: 80%; outer left tire tread: 80%; inner right tire tread: 80%; outer right tire tread: 80%; suspension: air suspension Rear axle 2:...

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1170x2280 mm Weight 500 kg Total power requirement 1 kw Dwsdpfx Abovz Hq Te Tef

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: Geo Knight Maxi - Press, Please see PDF for detailed secifications: The Maxi Press AIR is an Automatic large format heat transfer press intended for more automated and higher pressure needs than the Manual version. The Maxi- AIR provides an oversized platen & a better production-oriented press with a single front loading table and high pressure pneumatic lifting system. This pressure system is powered by a dual air-bag, 10-ton, 20,000 lbs max force self leveling mechanism. The press is activated with a push of a button, and automatically releases at the end of the timing cycle. The front console features the Digital Knight control, regulating digital temperature and digital automatic timing control, as well as full air pressure regulation. Ideal applications that the Maxi- AIR has performed flawlessly include: large fabrics & piece Djdpfxsv Dm Ude Ab Tswf goods, full-bleed printed sportswear, banners, fl oor mats, carpets, mouse pads, plastics, sheet metal and much more. Most importantly, the 20,000 lbs of regulated applied force allow for deep embedding of materials such as TILES into nomex padding for full bleed wrap-around printing, as well as larger embossing applications. The Maxi- AIR strongly supports the sublimation transfer process, as well as digitally produced transfers, hot and cold peel plastisol transfers and large format laminating processes.

Condition: ready for operation (used), Year of construction: 2017, This FORMAT4 Tempora 60.08 edgebander was manufactured in 2017. It features a feed speed of 12 m/min with a chain feed system and can handle edge thicknesses from 0.4 to 8 mm. Designed for professional furniture manufacturing, it includes milling and scraper units for precise edge finishing and a heated glue pot for consistent adhesive application. Ideal for high-quality, reliable edgebanding performance. Contact us for more information. Dwjdpfx Asx Eniwjb Tof Application Types Edge Banding

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Condition: very well maintained; low operating hours Equipment and technical data: - With PLC control including touchscreen - With joint milling unit with DIA tool up to 2 mm milling depth (maximum joint thickness 1 mm for special materials such as multiplex) - With extendable workpiece support - With quick-heating glue pot with glue change device - With cross-cut saw - With combination milling cutter r = 2 mm with separate pneumatic adjustment - With corner copying unit r = 2 mm - With surface scraper - Maximum edge thickness: 2 mm - Minimum - maximum workpiece thickness: 10 - 40 mm - Minimum workpiece length: 180 mm - Feed speed: approx. 7 m/min - Ready for operation: approx. 3.5 min - Power consumption: approx. 7.4 kW - With undercarriage - Extraction port: 1 x 140 mm Dsdpfx Abjx Enqho Tjwf Dimensions: approx. 4,200 x 1,300 x 1,400 mm Weight: approx. 750 kg Availability: approx. end of January 2026 Location: Hesse

Condition: ready for operation (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, TECHNICAL DETAILS Clamping force: 1,600 kN Screw diameter: 55 mm Tie bar spacing: 520 mm Injection pressure: 1,904 bar Mold dimensions (h x v): 520 x 470 mm Platen size (h x v): 710 x 660 mm Shot volume: 523 cm³ Ejector force: 33,000 N Ejector stroke: 150 mm Minimum mold height: 200 mm Maximum mold height: 600 mm Opening stroke: 1,050 mm MACHINE DETAILS Djdexzd Nvjpfx Ab Tjwf Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,600 x 2,300 mm Total weight: 10,900 kg Power supply type: Three-phase current Operating hours: 9,585 h EQUIPMENT Display language German CEE socket 16 A CEE socket 32 A Accumulator for increased injection performance 3 freely programmable inputs and outputs each Core pull pneumatic 2x Water manifold Levelling elements Interface for dosing unit Interface for temperature control unit USB interface Schuko socket 10 A Low-wear plasticizing unit Tool heating 24x Note: Machine is sold without material hopper.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 720x1000x1900 mm Weight 300 kg Dodpfx Abevz Hq Hs Towf Total power requirement 1,2 kw

Condition: ready for operation (used), Year of construction: 2008, operating hours: 49,673 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, ejector force: 22,000 N, ejector stroke: 100 mm, Function-tested and immediately ready for operation by service for Krauss Maffei injection moulding machines! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 800 kN Screw diameter: 35 mm Tie bar spacing: 520 mm Shot volume: 154 cm³ Injection pressure: 2,429 bar Ejector force: 22,000 N Ejector stroke: 100 mm Dwjdpfsxzd Ixex Ab Tof Platen length: 740 mm Platen width: 640 mm Mould mounting height: 300 mm Max. platen distance: 790 mm Tie bar dimensions (h x v): 520 x 420 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,350 x 1,700 x 2,000 mm Total weight: 6,500 kg Supply power type: three-phase current Input frequency: 50 Hz Operating hours: 49,673 h EQUIPMENT Documentation/Manual On-screen text in German CEE socket 16A 1x air valve Material hopper Water manifold Levelling elements EUROMAP 67 interface USB interface Schuko socket 10A Tool heating 24x

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x2000x2550 mm Dwedpfx Aevz Hqyob Tsf Weight 1400 kg Total power requirement 4,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 600x800x1900 mm Dwedpfx Ajvz Hqtob Tsf Weight 230 kg Total power requirement 0,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0,5 kw Dodjvz Hqmjpfx Ab Tswf