Used Merlin Gerin for sale (17)

Condition: new, functionality: fully functional, Year of construction: 2013, The part number 0685763C (often listed as 685763) corresponds to the Merlin Gerin MCH-M Spring Charging Motor Mechanism. This industrial electrical operator is designed specifically to automate the charging of stored-energy springs within heavy-duty circuit breakers. Core Technical Specifications Parameter Specification Details Manufacturer Merlin Gerin (Legacy brand of Schneider Electric) Model Type / Component MCH-M Gear Motor / Electric Operator (Spring Charging Motor) Catalog / Part Number 685763 (Variant suffix C denotes technical revision level) Rated Control Voltage (U s) 200/240 V AC (at 50/60 Hz) or 200/240 V DC Power Consumption 180 VA Built-in Limit Switch Rating 10 A at 240 V AC (Integrated limit switch/spring charged switch) Technical Level No. 01 Net Weight Approx. 1.78 kg to 1.97 kg (3.92 lbs to 4.34 lbs) Crodsz Ezv Sspfx Aiisi System Compatibility This motor mechanism is specifically designed as a plug-in breaker accessory for legacy, high-amperage Schneider Electric / Merlin Gerin Air Circuit Breakers (ACB) and Insulated Case Circuit Breakers (ICCB): Masterpact M series frames (M08 through M63) Masterpact MP series frames Masterpact MC series frames Functional Description The MCH-M mechanism acts as a motorized remote control interface. When electrical power is applied to the circuit, the motor runs automatically to compress the high-tension closing springs inside the Masterpact breaker. Once fully compressed, the integrated 10A Spring Charged Switch trips mechanically. This cuts power to the motor and readies the breaker mechanism for an instantaneous remote close or automated system reclosure command.

Condition: used, Auxiliary switch, automatic circuit breaker, fuse, line switch, line circuit breaker, switch disconnector, terminal plate, switch disconnector -Manufacturer: Merlin Gerin, switch disconnector type Selpact -Current strength: 1600 A -Voltage: 660 V/50/60 Hz Crjdpefubw Sefx Aiisi -Dimensions: 395/340/H435 mm -Weight. 54 kg

Condition: used, Auxiliary switch, automatic circuit breaker, fuse, line switch, line circuit breaker, switch disconnector, terminal plate, switch disconnector, circuit breaker, circuit breaker -Manufacturer: Merlin Gerin, circuit breaker type compact C630NI -Drive: 230 V/AC -Triggering: MX triggering via a relay or button with 24 VDC -Current strength: 630 A Credpsfubxasfx Aiiji -Dimensions: 290/155/H250 mm -Weight: 10.4 kg

Year of construction: 2018, condition: excellent (used), Type: Low Voltage Distribution Board / MCCB Panel Installed equipment 1 × Schneider Electric Compact NSX400NA main incomer Main incomer rating: 400 A 3-pole configuration 4 × Schneider Electric Compact NSX160F outgoing MCCBs 4 × Schneider TM125D thermal-magnetic trip units Outgoing MCCB rating: 125 A each Breaking capacity: approximately 36 kA at 415 V 1 × additional Schneider / Merlin Gerin outgoing device rated 125 A 1 × additional Schneider / Merlin Gerin outgoing device rated 63 A Three-phase L1/L2/L3 distribution Internal busbar system Labelled outgoing circuits Codpfszlii Nsx Aiiori Spare internal capacity / blanked positions Heavy-duty floor-standing steel enclosure Lockable double front doors The board appears complete and is in good visual condition. Operational testing and final electrical inspection should be carried out by the purchaser before installation. Available for inspection. Additional photographs and technical information can be provided.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 1,100 mm, measuring range Y-axis: 1,100 mm, measuring range Z-axis: 750 mm, table load: 2,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Measuring range, X-axis: 1,100 mm Measuring range, Y-axis: 1,100 mm Measuring range, Z-axis: 750 mm Travel length, X-axis: 1,100 mm Travel length, Y-axis: 1,100 mm Travel length, Z-axis: 750 mm Max. traverse speed: 350 mm/min Crsdjzy Ezdopfx Aiisi Table length: 2,050 mm Table width: 1,100 mm Max. workpiece weight: 2,000 kg Table load: 2,000 kg Distance between columns: 1,100 mm MACHINE DETAILS Input current type: Alternating current (AC) Input voltage: 400 V Compressed air connection: 6 bar Operating pressure: 6 bar Operating temperature: 22 °C Ambient temperature: 16–30 °C Dimensions & Weight Dimensions (L x W x H): 2,050 x 1,890 x 2,700 mm Total weight: 2,800 kg Year of last overhaul: 2013 EQUIPMENT Virtual DMIS Software V7.0 OnMotion Upgrade Kit with Servo Tower, Joystick Box, and interface cables PC with OnMotion hardware and Virtual DMIS V7.0 5 used TP20 measuring probes Documentation / Manual Nameplate Note: Due to age, the cables between the machine and the controller are stiff and brittle. Disconnecting and transporting them may result in the need to replace individual connection cables or connectors. However, this can be done easily with some knowledge.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, High speed Flow wrapping machine direct from closed Scotch Egg factory, commonly used for wrapping pies, Scotch Eggs and other bakery products. Rare to find a recent manufactured machine, this is the newest one we have seen. Cjdpozmy Avefx Aiieri

Condition: new, Schneider Electric / Merlin Gerin Isolation Transformer: * Type: ABL 615250U * Power: 2500 VA (2.5 kVA) * Input: 230/400 V * Output: 230 V * Current: 10 A * Standard: EN 61558-2-4 (Safety Isolation Transformer) Crjdezathgopfx Aiioi

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, input voltage: 240 V, input frequency: 50 Hz, Kodak Magnus 800 Quantum Platesetter (CTP) — Complete System for Sale Manufactured: March 2009 | Fully Functional | Status: Ready System Overview Offered here is a complete Kodak Magnus 800 Quantum thermal CTP (Computer-to-Plate) line, sold as a full working system including the platesetter, automatic processor, multi-cassette autoloader, chiller, and punch/bender unit. This setup has been in production use and is shown powered on and reporting "Ready" status on its native control software. Crodpfx Aozzpwrsiiji System Components 1. Kodak Magnus 800 Quantum Platesetter Serial No.: M8G0967 | Manufactured: March 2009 Cat No: 010-00663A Electrical: 200–240V, 50Hz, 15A Pneumatics: 8 Bar Class 1 laser product, CE / CSA (C/US) certified 2. Magnus 800 Multi Cassette Unit (autoloader) Serial No.: M8M0488 | Manufactured: March 2009 Cat No: 010-00313A Electrical: Mains 200–240V 50Hz 5A + Platesetter 200–240V 50Hz 5A Pneumatics: 8 Bar CE / CSA (C/US) certified 3. Automatic Plate Processor — Mercury T-HD 1250 (made for Kodak by Heights UK Ltd.) Serial No.: ME10408 | Year: 2009 Electrical: 200–230V, 16A, 50/60Hz, 2W+GND CE, FCC, ETL certified 4. Recirculation Chiller — Neslab Merlin M75 Maintains stable processing temperature for consistent plate output (unit shown active, set to 16°C). 5. Plate Punch/Bender — hu.q CSG-125 Serial No.: 080872092016 | Manufactured: Aug 2008 Electrical: 200–240Vac, 1A, 50/60Hz CE, cUL/US Listed 6. Control Workstation Lenovo ThinkVision display + keyboard running native Magnus 800 controller software (Status / Tools / Miniview / Queue / Cassettes / Messages / Safety). Cassette bays loaded and configured with plate size TP-U 968x651x0.3. Highlights Complete, matched Kodak Magnus 800 line — platesetter, processor, autoloader, chiller, and finishing unit sold together All units date from the same production year (2008–2009), consistent with a single original installation System actively powered up and shown in "Ready" operating state Automatic cassette loading with multiple plate bays configured and stocked Includes integral roller conveyor/output section for plate handling Notes for Buyer Voltage/phase requirements: platesetter and processor both require 200–240V industrial supply (verify local phase configuration — processor listed as 2W+GND) Compressed air supply required (8 bar) for platesetter and cassette unit Buyer should arrange inspection/live demonstration and professional disconnection, rigging, and transport, as with any large-format CTP installation Sold as-is; recommend a functional test run with actual plate material prior to purchase

Year of construction: 2003, condition: used, Wort pan for fast, energy-efficient, and gentle wort boiling in the Merlin© system. The wort is distributed in a thin film across several horizontal plates via a distribution system. Codozi Atijpfx Aiisri Additional title: steam-heated stainless steel brewing vessel. Thin-film wort boiler Capacity: 15000 l Material: stainless steel Features: insulation; heating Zones

Condition: used, Steam-heated 4-vessel brewhouse with stainless steel brewing vessels. The system is suitable for infusion and decoction methods as well as high-gravity brewing and comprises the following components: - Mash tun (Huppmann, 2004) with a capacity of 150 hl, steam-heated, insulated, with a bottom-entry agitator and pre-mash screen - Lauter tun (Huppmann, 2004), insulated, with a drop floor, grist cutter and spent grain discharge screw - First run-off vessel for wort (Steinecker, 2003), insulated tank - Wort kettle (Steinecker ‘Merlin’, 2003), steam-heated, insulated - Wort condenser - Whirlpool, insulated, with hop dosing vessel (manual flap) and top-entry spent grain discharge - Spent grain tank with a capacity of 15 hl, conical - Hop dosing unit with 3 stainless steel vessels and hop chutes on a shared stainless steel frame - Wort cooler (API, 2006), two-stage plate heat exchanger for cooling 180 hl/h of hot wort to fermentation temperature - 3 centrifugal pumps for wort transfer - Various pipework, valves, fittings and sensors Additional title: Brewing system with steam-heated stainless steel vessels; built between 2003 and Cast wort capacity up to: 18000 l ; 15,500–16,000 litres for full beer, 12,000 for bock beer Malt bill: 2500 kg/batch Cjdpfjzizb Ssx Aiieri Operation / Control: Simatic S7-400 Material: Stainless steel Features: Mash tun; lauter tun; wort transfer tank; hop dosing; wort kettle (Merlin); whirlpool; spent grain tank; wort cooling; 3 x wort pumps

Condition: used, Year of construction: 1990, Equipment: all wheel drive, * O&K crawler excavator Cjdpfx Aiowpptloiori * Year of manufacture 1990 * Window defect * Needs repair * Work lights * Bucket ----Internal vehicle number: 10119-----Subject to errors and prior sale

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2013, Equipment: ABS, * Air suspension * SAF axles * Stanchions * Twist-locks for containers * Unladen weight: 8,390 kg -----Internal vehicle number: 11009----Errors & prior sale excepted. Crjdpfx Aswtaz Isiisi WhatsApp support available! If you have questions about the vehicle or need further information, please feel free to contact us via WhatsApp. WhatsApp: German, English -- WhatsApp: German, English, Arabic.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1,175 h, load capacity: 3,500 kg, lifting height: 5,500 mm, free lift: 1,801 mm, fuel type: diesel, mast type: triplex, construction height: 2,570 mm, fork carriage width: 1,120 mm, fork length: 1,800 mm, empty load weight: 5,573 kg, total length: 2,783 mm, drive type: Diesel, construction width: 1,320 mm, Electric 4-wheel forklift Load center: 500 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tire type: Superelastic Front tire size: 27x10-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 6.5-10 Rear tire condition: 60 - 80% Description: Inspection and safety check recently completed Side shifter, 3rd valve, 4th valve, rear work light, front work light, roof cover, windshield, half cab, heater, load guard, soot filter, compliant with STVZO (German Road Traffic Licensing Regulations), full cab, full free lift, safety light, safety pilot, interior mirror, joystick, single-pedal operation, LED, Cedpfo Ahuxljx Aiieri 1-pedal operation, joystick (Solo Pilot), comfort seat, multi-color display, panoramic rearview mirror, reversing warning, flashing beacon, engine: 43.2 kW Kubota

Condition: used, first registration: 05/2020, overall weight: 2,700 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, color: grey, gearing type: mechanical, suspension: other, Trailer Data: TPV boat trailer, first registered 27.05.2020, 2 axles, permissible total weight 2,700 kg. Draco 2100 SC V8 cabin boat data: Year of manufacture 1979; 147 kW; 660 operating hours (petrol). Material: GRP, engine: Volvo Penta AQ200 V8. Length: 6.20 m, width: 2.12 m. Equipped with all extras, including weather canopy and full cover. FOR US, CONDITION AND OVERALL IMPRESSION ARE MOST IMPORTANT; PRICE IS SECONDARY. The boat trailer can only be purchased together with the boat for EUR 12,999.00. The boat description and pictures can be found on our website under 'Commercial Vehicles'. Perfectly maintained condition and immediately ready for use. Regarding the specified 660 operating hours: this figure is read from the meter; the total operating hours unfortunately cannot be verified. *Trade-in, part-exchange, or financing of your vehicle possible! All information is provided without guarantee.* More offers can be found on our website. Crsdpswtfn Tjfx Aiioi The description and data provided do not constitute a binding representation and are not guaranteed. The only binding agreement is the purchase contract concluded at our dealership. Subject to errors and prior sale!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler underwent maintenance three months ago. During this service, the slew ring bolts were replaced among other tasks, and both the engine and hydraulic oils were serviced. TECHNICAL DATA Crodpex Dmgvofx Aiisi Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Capacity at max. lifting height: 1,500 kg Capacity at max. reach: 150 kg Slew tower rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine output: 107 kW / 145 hp Fuel tank capacity: 150 l Performance Speed in 1st gear: 16 km/h Speed in 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrical system On-board voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent all-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS certification Electronic joystick control Merlin control system Tac-Lock tool carrier Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent all-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch directional control Hydrostatic transmission Air suspension seat Note: The winch (€4,000) and work platform (€1,000) can be purchased separately if required. A translated version of the maintenance report is attached as a document.

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data Csdpfx Aijxcybkeieri - 1 gas recuperator burner - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Condition: new, INA ZARF2575-TV-A roller bearing > unused < in opened original packaging, 100% functional. Csdpei Eba Eefx Aiiori