Used Heat Exchanger for sale (13,967)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 24063, overall weight: 5,500 kg, power: 350 kW (475.87 HP), heating capacity: 350 kW (475.87 HP), MAwera FU350RIA-B automatic wood chip heating system, output: 350 kW Fuel: wood chips, with automatic underfeed combustion Flow temperature: max. 95 °C System type: hot water system Plant components: boiler body, combustion chamber and heat exchanger, screw conveyor for fuel feed, ash separator and multicyclone, flue pipes for chimney connection, flue gas fan, chimney, control unit incl. switch cabinet, operating manual and machinery logbook. Easy to maintain and reliable On-site inspection in Austria possible Dismantling: in calendar week 23. Gjdpfx Ajy Rfn Ujb Djit

Condition: used, machine/vehicle number: Model TS170, power: 50 kW (67.98 HP), input voltage: 240 V, heating capacity: 50 kW (67.98 HP), L.B. WHITE PREMIER 170 INDUSTRIAL HEATER – INDIRECT FIRED – 49kW L.B. White Premier 170 industrial heater (Model TS170). High-output indirect-fired unit producing clean, dry heated air – ideal for construction sites, workshops, drying, or temporary heating. Specs: Approx. 50kW output (170,000 BTU) Propane gas 240V single phase High airflow unit (industrial capacity) Condition: Good used condition Sold as seen Uses: Site heating Drying plaster / concrete Warehouse heating Marquees / temporary structures Gsdpfxey Rfd Ns Ab Djit Message for more details or video of it running.

Year of construction: 2022, condition: like new (used), SencorpWhite CeraTek TA12-P/2 heat sealer Make: SencorpWhite Type: CeraTek TA12-P/2 Function: Heat sealer / For sealing medical pouches / Pouch sealing machine Year of manufacture: 2022 Condition: As good as new (hardly used) Product Description The CeraTek P/2 Series Precision Rotary Sealer is a versatile precision benchtop sealer designed for sealing medical pouches and other precision sealing applications The TA12-P/2 is a 12″ model - Maximum seal width 11.5" (approx. 30 cm) Standard features Top heat PLC with touch screen HMI Temperature control with closed loop control Short cycle alarm Electronic pressure control High/low temperature alarm High/low pressure alarm Resettable cycle counter External output connections CE and ISO 11607 compliant Cat. 3 safety reset 115 Volt +/- 10% Gsdpfx Abjvdp N Dj Djit Scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace - As good as new: hardly used Gjdpfx Aeiryyasb Dsit - Documentation available (both electronic and physical) - Pallet with spare parts incl. TECHNICAL DATA Plant type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Control voltage: 230 VAC / 24 VDC Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Installation area: 900 x 1900 x 3000 mm Total plant weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: refurbished (used), functionality: fully functional, Equipment: CE marking, Electric car-bottom furnace for heat treatments on steels (normalizing, annealing, tempering, preheating, etc.) by Pagnotta Termomeccanica srl, Deruta, Italy. Gsdsyt Iz Ujpfx Ab Doit Maximum temperature: 1,100°C Usable loading dimensions: 1,250x800xh1,000 mm Capacity: 1,000 liters CE Declaration of Conformity Used and refurbished machine with new electric heating elements The listed specifications are for informational purposes only; the photos depict similar machines. The furnace can be customized according to your specific heat treatment process.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 30531-L-05/13, overall weight: 2,000 kg, power: 45 kW (61.18 HP), heating capacity: 45 kW (61.18 HP), smoke pipe connection diameter: 300 mm, nominal heat output: 45 kW (61.18 HP), space requirement length: 3,000 mm, space requirement height: 2,500 mm, space requirement width: 1,800 mm, temperature: 50 °C, total height: 2,200 mm, total length: 2,400 mm, total width: 1,000 mm, type of input current: three-phase, input voltage: 230 V, filling opening width: 600 mm, filling opening length: 400 mm, control cabinet width: 400 mm, control cabinet length: 200 mm, control cabinet height: 900 mm, nominal power: 45 kW (61.18 HP), This heating system was able to heat up our not optimally insulated workshop of approx. 300 m² within a maximum of 25 minutes. Included are approx. 30 m of air ducts with closable outlets, an additional pump for the most remote room, as well as a heat exchanger with an extra circulation pump, which also supplied our showroom (office) with heat. A high-quality stainless steel chimney is also provided, which we are including additionally. This heating system is being sold due to the closure of our workshop. Collection requested by mid-June 2026. Gijdoy N Tf Sepfx Ab Djt

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, We offer a complete heating system for sale. The set includes the following equipment: 1. UNICAL Bahr 12 800 boiler from 2020, 2. Riello RL70 burner, 3. Control cabinet with automation, 4. Accessories and water treatment station, 5. Double-walled tanks 2x5000L. Full documentation for the set is available. The entire system is in very good technical condition. All devices are operational and ready for use. The system is suitable for heating a large house or another building. Sale with 23% VAT invoice. If you have any questions or need additional information, please contact us by message or phone. Gedpfxey N Sq Hj Ab Dsit

Condition: used, Year of construction: 2012, Complete Power Plant, Full CHP Plant Wood Chip Heating / Thermal Oil System VAS 6MW Thermal + 1.1MW Electrical Output The plant was originally built in 2003 & 2004. Major components such as the thermal oil heater and hot water ECO were entirely replaced in 2012. Components: - Walking floor - Hydraulic feed - VAS combustion chamber - VAS thermal oil heater - Hot water ECO - Dedusting (coarse and fine dust removal) - Ash removal by chain conveyor - Exhaust gas path incl. fans and chimney system - Turboden ORC module with 1.1MW electrical output - Complete plant control with visualization Including units, pumps, and valves Including thermal oil pumps Including thermal oil Including all accessories required for operation Giedpfxjvytfuj Ab Dot The plant is being sold because a larger plant with significantly higher capacity has been built nearby. The walls and roof of the boiler house can also be included if required. Remaining thermal output in operation with Turboden ORC module: 5MW Electrical output ORC module: 1.1MW Fuel consumption approx. 9 loose cubic meters per hour (depending on fuel) Dismantling must be carried out by the buyer. Further information on request.

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, input voltage: 230 V, input current: 15 A, input frequency: 50 Hz, Equipment: documentation/manual, Used Secabo TS7 Transfer Press Manufacturer: Secabo Model: TS7 Voltage: 230-250V (50Hz) Gsdpfx Absy Nztdo Djit Includes manual and extra parts

Year of construction: 2005, condition: excellent (used), Name: Vertical heating cooling mixer Manufacturer: Lödige Type: TSHK160 / KGU400 Year built: 2005 Gisdpfx Aeiup H Tjb Det Speed: 104 / 300-1500 rpm Hours of operation: Very few operating hours Material: Stainless steel Driving force: 11 / 45 kW Model: ATEX version / Explosion proof Total content: Heating mixer: 210 liters / cooling mixer: 391 liters Parts in contact with product: 1.4541 Gear box: Bevel gear motor/ motor frequency controlled Dimensions: L 4605 x W 4225 x H 3550 mm Technical doc.: Yes Message: Technical center operation. Wood chips / melanin wood additives Accessories: Platform with stairs, 30 kW temperature control unit, control panel, control cabinet, dust filter

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, As-new drying chamber, fully functional, immediately available Gsdpfey Ny U Tex Ab Dsit

Condition: new, power: 14 kW (19.03 HP), inner dimension length: 1,000 mm, inner dimension width: 1,000 mm, inner dimension height: 1,000 mm, total length: 1,395 mm, total width: 1,600 mm, total height: 2,045 mm, overall weight: 400 kg, control type: NC control, actuation type: electric, fuel type: electric, continuous power: 14 kW (19.03 HP), Equipment: CE marking, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately according to the delivery address. Please contact us for an individual transport quote. ✅ Made to order ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment Please also inquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Oven with Electric Heating – MATOVENB-101010 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Compact ☘️ Efficient ☘️ Professional Curing ✅ Electrically heated powder oven ✅ Compact design for small and medium-sized workpieces ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Automatic exhaust fan function adjustable ✅ Acoustic signal at the end of curing time ✅ Insulated door with special locking system ✅ Robust sandwich panel construction ✅ Excellent heat retention through strong insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shut-off after process completion ✅ Can be used with a mobile workpiece trolley ✅ Optional insert shelving system for small series ➖➖➖➖➖ ♨️ Also available with upgrade for up to 500 °C for high-temperature processes (optional) ➖➖➖➖➖ Technical Specifications: ✔️ Electric heating power: 12 kW ✔️ Blower output: 1,500 m³/h ✔️ Circulation fan: 0.75 kW ✔️ Total output: approx. 14 kW ±10% ✔️ Digital temperature control ✔️ Stepless temperature adjustment up to 220°C ✔️ Interior: 1.2 mm galvanized steel ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm rock wool + 100 mm glass fiber ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Acoustic signal after process end ✔️ Control panel: 1 piece ➖➖➖➖➖ ⚙️ Optional Control Functions ✅ PID control for precise temperature management ✅ Touchscreen control panel and smartphone operation ✅ Ramp heating mode for defined temperature curves ✅ Storage of process parameters ✅ Weekly & monthly reports at the push of a button ➖➖➖➖➖ ⚙️ Safety and Process Control Gjdpfxowfpp Ee Ab Doit Safety sensor for overheating prevention Automatic shut-off in case of fault Acoustic warning signals for errors Fume extraction via automatic ventilation ➖➖➖➖➖ ♨️ Ramp-Heating Mode (optional) Control temperature profile and holding times precisely, e.g.: • Reach target temperature in defined time • Hold at set temperature for desired period • Controlled cool-down to target temperature • Automatic notifications for process events ➖➖➖➖➖ ✅ No repeated settings required! The oven stores your process parameters – batch after batch. This saves you time and prevents errors. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models so you can flexibly plan your investment. Please contact us for information about leasing, hire purchase, or installment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and secure the advantage of professional service and guaranteed quality! ✨ Custom dimensions or individual configurations are available on request. We are happy to design a suitable solution for your workshop. Inquire now – make your business ready for professional powder coating!

Condition: used, Year of construction: 2001, Wood chip boiler Heizomat HSK RA 500, output 500kW, year of manufacture 2001, incl. cleaning unit, ash removal system in container, feed auger, and control system. Dismantling must be carried out by the buyer! System is fully operational and in use, incl. full documentation! A wall opening to the outside will be created by the customer to allow the system to be rolled outside in one piece. Bunker system is set up for pellets, Heizomat unit is suitable for wood chips. Gisdpfx Abjvyrwpe Dot

Condition: used, Year of construction: 2008, machine/vehicle number: 972, temperature: 600 °C, inner dimension length: 2,500 mm, inner dimension width: 2,500 mm, inner dimension height: 3,500 mm, overall weight: 20,000 kg, number of chambers: 2, fuel type: gas, Part 1: WQ-98.98.138/35E Shipping weight: 20,000 kg Furnace Data Max. temperature: 600 °C Gedoy H I Szspfx Ab Dsit Temperature uniformity: Continuous process: ±5 °C Maturation process: ±3 °C Usable chamber dimensions Width: 2500 mm Length: 2500 mm Height: 3500 mm Load capacity Max. permissible load (gross): 2200 kg Performance data Heating power (gas): 1000 kW Installed power: 48 kW Technical data Supply voltage: 3 × 400 V / 50 Hz External dimensions Length: 4443 mm Width: 8395 mm Height: 7355 mm

Condition: used, Year of construction: 2006, Gilles wood chip heating system, output 145 kW, year 2006, incl. feed auger with back-burn protection, incl. fuel transport auger, incl. control unit, good condition. Dismantling must be carried out by the buyer. The system is at ground level and can be rolled out in one piece. Forklift available! Giodpfxsvgcwme Ab Det Not included: - Bunker discharge - Chimney

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Gisdsy Nkqxjpfx Ab Dst Hour counters (heating rods / lamps) Drying phase counter Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Main switch Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit The unit was used in an industrial environment. If you are interested or need more details, please send me a message.

Condition: new, functionality: fully functional, power: 14 kW (19.03 HP), gearing type: automatic, fuel type: diesel, color: orange, operation weight: 2,500 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.07 m³, Year of construction: 2025, operating hours: 20 h, Equipment: adjustable boom, adjustable chassis, air conditioning, cabin, hydraulics, parking heater, quick-change device, steel tracks, SPECIAL PRICE – CLEARANCE SALE – ONLY 2 UNITS AVAILABLE! HT25 PRO Mini Excavator with 2.5 t operating weight, equipped for professional applications in construction, civil engineering, landscaping, and municipal sectors. ➡️ Special price due to stock clearance / B-grade equipment ➡️ Technically fully operational, ready for immediate use ➡️ Machine with up to 20 operating hours ➡️ Includes hydraulic quick coupler and 3 buckets (25 / 50 / 100 cm) ➡️ Cosmetic defects, storage marks, or transport damage possible The machine features a robust specification and is designed for demanding tasks. Standard steel tracks ensure high stability, excellent traction, and long service life, even in tough operating conditions. Get in, start, and work – this excavator is ready to operate immediately and works flawlessly. EQUIPMENT & BENEFITS: • Kubota D1105 diesel engine (original) • 14 kW continuous power / up to 18.4 kW peak • Water-cooled diesel engine • Standard steel tracks • Load-sensing hydraulics • Hydraulic flow rate: 61.6 l/min • Hydraulic pressure up to 25 MPa • Side-swing boom • Enclosed comfort cab • Heating and air conditioning • Ergonomic joystick controls • LED work lighting • Hydraulic quick coupler • Includes 3 buckets: 25 cm, 50 cm, and 100 cm TECHNICAL DATA: Gsdpfxox Hhu Nj Ab Dsit • Operating weight: approx. 2,500 kg • Digging depth: up to 2,370 mm • Dump height: up to 3,500 mm • Transport width: approx. 1,500 mm • Travel speed: approx. 2–4 km/h • Climbing ability: approx. 30° Price €15,000 net plus VAT Sales Notice: Sold as B-grade / special clearance item. The machine is fully functional, immediately operational, and is sold with a hydraulic quick coupler and a set of 3 buckets (25 / 50 / 100 cm). Cosmetic defects, storage, or transport damage may be present. Operating hours up to 20 hours. Location / Delivery 📍 Location: Rheda-Wiedenbrück 🚚 Delivery throughout Germany and Europe available at extra cost 🔧 Inspection available by appointment Only 2 machines left – while stocks last. Contact us now to secure the special price and start working immediately.

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, overall weight: 1,800 kg, operation weight: 1,800 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable boom, adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Immediately available – Get in & start working! Are you looking for a reliable, modern, and ready-to-use mini excavator in the 2.0-ton class? The LT-20 PRO from Tec-Point GmbH impresses with high performance, premium build quality, and maximum operator comfort – perfect for construction, landscaping, and municipal applications. Thanks to its compact design and state-of-the-art load-sensing hydraulics, this machine is ideal for confined jobsites and powerful enough for demanding earthmoving and foundation work. The enclosed cab with heating makes the LT-20 PRO a true all-season professional machine! Giedpfx Absx Hg D Ao Dot ⭐ Your advantages at a glance ✅ Swing boom – ideal for work in tight spaces ✅ Telescopic undercarriage 990–1,300 mm – maximum stability ✅ Load-sensing hydraulics – precise and energy-efficient control ✅ Axial piston pump with variable displacement ✅ Travel motors with high/low speed ✅ Double cast counterweights – increased stability ✅ Robust 230 mm rubber tracks – durable and wear-resistant ⚙️ TECHNICAL DATA Operating weight: approx. 1,800 kg Engine: Kubota D902 | 3-cylinder diesel Power: 11.8 kW / 16.1 HP Digging depth: up to 2,270 mm Reach: up to 3,910 mm Travel speed: 2.2 / 4.5 km/h Gradeability: 30° ️ COMFORT & FEATURES ✔ Enclosed comfort cab incl. heating ✔ Ergonomic joystick controls ✔ LED work lights ✔ Comfort seat for long operating hours ✔ Dozer blade ✔ Hydraulic safety valves ✔ Reinforced steel construction for maximum durability INCLUDED IN THE PACKAGE: 3 BUCKETS The scope of delivery includes 3 professional buckets: ✅ 25 cm trenching bucket ✅ 50 cm digging bucket ✅ 100 cm grading bucket ➡️ Ready for any jobsite out of the box! ➕ OPTIONAL EXTRAS AVAILABLE Hydraulic quick coupler ➡️ Note: The quick coupler shown in the images is not included in the standard set and can be ordered as an option. Hydraulic tilt quick coupler (tilting function) ➡️ Note: The tilt quick coupler shown in the images is not included in the standard set and can be ordered as an option. Hydraulic auger set up to Ø 300 mm ️ SERVICE & WARRANTY Maintenance every 250 operating hours or annually 12-month warranty throughout Europe Spare parts & service directly from our warehouse in Rheda-Wiedenbrück IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Europe-wide delivery organized on request Location: Rheda-Wiedenbrück Our machines are available immediately and ready for operation. We invite you to inspect and test any of our machines on site. SPECIAL PRICE €17,500 net (RRP) Special offer available – contact us! Request more information now & secure your advantage! Demand is high – secure your LT-20 PRO today. ➡️ Contact us directly via Machineseeker or give us a call – we are happy to advise you personally!

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 4384059, power: 6.5 kW (8.84 HP), overall weight: 30 kg, input voltage: 400 V, For sale used Weishaupt burner electric motor D132/120-2A Nr. 4384059 6.5kW 380-400V 13,5A 2900rpm Gijdpfx Abey Nh Uuj Dot

Condition: used, Year of construction: 2006, functionality: fully functional, power: 2,300 kW (3,127.13 HP), For sale used gas burner Cib Unigas P73A 320-2300kW Giedpfx Ajy Nbtqob Dot

Condition: used, Year of construction: 1998, machine/vehicle number: 16510010, power: 738 kW (1,003.40 HP), overall weight: 100 kg, input voltage: 400 V, fuel: domestic gas H, For sale used gas burner Baltur BGN 60 P 248-738kW. 1998. Ser.Nr. 4073817. Gjdpfxey Nbqce Ab Dsit

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 185 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 200 mm, total height: 850 mm, total width: 780 mm, wire diameter (max.): 0.3 mm, overall weight: 250 kg, product length (max.): 800 mm, number of axes: 3, wire diameter (min.): 0.1 mm, This 5-axis Makino U6 HEAT was manufactured in 2016. It features an impressive X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 420 mm. The machine has a maximum workpiece size of 1,000 x 800 x 400 mm and can handle a maximum workpiece weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Makino U6 HEAT wire EDM machine we have for sale. Contact us for further details. Godpjy Hi T Tofx Ab Doit • Spindle speed: 150–2000 rpm • Spindle drive power: 0.75 kW (at 100% duty cycle) • Tool changer: Automatic, 10 stations • Tool holder: SK 30 (DIN 2080 / DIN 69871) • Feed rate (X/Y/Z): 5–500 mm/min • Rapid traverse: 500 mm/min • Clamping area: 420 x 125 mm • Max. workpiece weight: 10 kg • Power supply: 230 V / 50 Hz • Availability: Not specified

Condition: used, This listing is for the Grant T100 12L Heating Circulating Bath The unit is in full working condition and is ready for immediate use Grant T100 12L Heating Circulating Bath – Stainless Steel Tank Gedpfx Absxhfyio Doit The Grant T100 12L Heating Circulating Bath is a robust, precise temperature control system combining the T100 Optima circulator with a 12-litre stainless steel tank. Ideal for laboratories requiring high stability and reliability for routine heating applications, it’s designed for use across many scientific disciplines. Key Features Temperature Range: +5 °C to 99 °C (cooling via immersion coil available) Capacities: 12 L Stainless Steel Tank: Durable, easy to clean, resistant to corrosion Temperature Stability: ±0.05 °C Temperature Uniformity: ±0.1 °C Heating Power: ~1.3 kW Controller: Grant T100 Optima circulator

Condition: used, This listing is for the Thermo Scientific Precision CIR19 Heated Circulating Bath The unit is in full working condition and is ready for immediate use The Precision CIR‑19 is a robust and reliable lab tool tailored for high-precision temperature-sensitive workflows. Its strengths include excellent uniformity, precise digital control, safe operation features, and ease of maintenance. Whether you're incubating samples or performing delicate assays, it’s built to deliver consistent, reproducible results Overview & Applications The Precision CIR‑19 is a high-performance 19 L (5 gal) circulating water bath engineered for applications demanding strict temperature uniformity and control—think enzyme reactions, serological assays, or any sensitive method where thermal consistency matters. Key Features Perimeter-directed water flow for superior temperature uniformity. Coil-free internal design, making cleaning and maintenance a breeze. Gjdpsxhfpwofx Ab Deit Microprocessor-based digital control, displayed via a monochrome LCD. Auto-on/auto-off timers and audible alarms, enhancing scheduling and safety. Low-fluid (dry-run) protection, guarding against overheating or damage. Hinged lid with extended height, ideal for accommodating taller labware. Supplied with a stainless steel gable cover, diffuser tray, and the quirky but useful rubber duck.

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, total height: 2,600 mm, total length: 12,200 mm, total width: 2,500 mm, overall weight: 13,000 kg, Combined Heat and Power Plant (CHP), Manufacturer: STIEGELE, housed in soundproof special containers, 800 kVA Manufacturer: Stiegele Year of manufacture: 2007 Operating hours: approx. 12,000 per engine Engines: Make: 2 x Scania DC 12-54, Variant A03P Engine speed approx. 1,500 rpm each Electric drive: EMK type KS160L-4-PTC Feed pump: Elektra type DD0705 Mode of operation: Palm oil (primary), Diesel / Heating oil. The CHP was designed for operation with vegetable oil (palm oil) and has been converted accordingly. For continuous operation with heating oil or diesel, technical modifications may be required. Giedey Iu Hnspfx Ab Dot Generators: Make: 2x Marelli Type: MJB315MA4 Output: 880 kVA Touch control: Manufacturer Woodward, Type GCP-30 Dimensions (per container): Length: approx. 12,200 mm Width: approx. 2,500 mm Height: approx. 2,600 mm Weight: approx. 13,000 kg The CHP system is modularly installed in two 40" soundproof containers and has been out of operation for some time. The sale includes the containers, control system, and heating oil tank. Viewing and inspection of the system is expressly encouraged. Sale exclusively to commercial customers. Any and all liability for material defects and warranties is excluded. The machine is sold used and as inspected, with no guarantee or assurance of specific properties. Claims for damages are only possible in cases of intent, gross negligence, or injury to life, body, or health.