Used Hardening Furnace for sale (1,842)

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney Kedpfx Adefz Anps Nowt The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Kwodpfx Adsfy Txyj Nst Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. Ksdpfx Aefzkqmjd Newt History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: reconditioned (used), Melting and casting furnace for aluminum and ZnAl. The furnace is after a general renovation, new lining, specialized painted, functional. The furnace capacity for aluminum is approximately 3,000 kg. Suitable for melting with a gas, oxygen or oil burner. Kwsdpjh Nycaefx Ad Not

Condition: used, Year of construction: 1988, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 20992, Dear Mr. / Mrs., we have opportunity to offer you IPSEN VTTC-324 from 1988. Characteristic of vacuum furnace: Kwsdpfx Adswah R Re Net Sn = 165 kVA Un = 400 V, 50Hz In = 240 A Useful dimension: 450mm x 600mm x 900mm Power of heaters = 120 kW Voltage of heaters = 43V, 50Hz Current of heaters = 1613 A Temperature range = 350 - 1320 C Absolute vacuum = 1 x 10e-5 (diffusion pump) Absolute pressure = 5 bar Also, with furnace is coming lot of spare parts and equipment for thermal heating process (tank for gas, heaters, lot of controllers, chargers and everything). For all information that you need, please contact me.

Year of construction: 2010, condition: refurbished (used), Vacuum furnace for heat treatment of metals with a molybdenum chamber. A high vacuum of 10^-6 mbar is achieved in the furnace. Maximum operating temperature 1300 C. Ksdpfx Aden Snx Hj Njwt Dimensions of the working chamber: 0.35 x 0.42 m diameter x height. Molybdenum heating chamber. Closed circuit cooling system with a buffer tank Pumping system with a mechanical and turbomolecular pump. Ability to perform processes: • Annealing in high vacuum • Stress relief • Vacuum brazing • Vacuum brazing • etc. The stove is 100% functional after modernization. Sales with installation and commissioning at the customer's place. The final price depends on the scope of modernization, agreed individually with the client. If you have any questions, please contact us.

Condition: good (used), Laboratory Tube Furnace Naber R70/9 - Housing made of high quality structural steel. - The diameter of the tube is 70mm - The length of the tube is 1000mm - Tube made of sillimantine, works with two end caps 60 - damaged on one side. - Silent electronic relay Kwsdpody Huyefx Ad Net - Maximum temperature - 1200C - Temperature drop - 10 C / min - Programmable temperature curve

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Kjdpfx Adjqgfbgo Nowt

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Kwedeq Ttz Ejpfx Ad Nst

Year of construction: 2010, condition: ready for operation (used), Heated surface: 1600x2600/ 2000x2000mm, nominal power: 120kW, length: 2600mm, width: 2300mm, with control cabinet and conveyor. Kwjdpfxsifpuao Ad Njt

Year of construction: 1991, condition: ready for operation (used), Working/ nominal temperature: 800/ 850°C, inner dimensions: 1100x500x260mm, heating output: 120kW, connected load: 1.5kW, with documentation, without accessories or spare parts, an inspection is possible. Kwsdpfxopcgzgo Ad Net

Year of construction: 2021, operating hours: 100 h, condition: like new (used), The chamber furnace is best suited for preheating, drying, curing and other thermal treatment processes of various materials in the temperature range from 50⁰C to 150°C. We can highly recommend this furnace as ammunition dryer. Chamber volume: 7392 Chamber dimensions: 2200x1400x2400mm (WxDxH) Outer dimensions: 3050x2700x2720mm (WxDxH) Maximum temperature: 160 Heating power: 54kW Kwsdpfx Adjlk Hiis Nst Total power: 59kW Own weight: 2800kg

Year of construction: 2000, condition: excellent (used), functionality: fully functional, maximum load weight: 7,000 kg, working height: 1,750 mm, The gas nitration vacuum oven is made up of all the steps involved in gas nitration, carburizing, and tempering. Kodeu T N Efspfx Ad Nowt The machine is in very good condition.

Condition: used, Year of construction: 2007, operating hours: 6,383 h, functionality: fully functional, machine/vehicle number: 172, ATV Technologie GmbH Tabletop Quartz Tube Furnace, PEO 601 Model: PEO601 Condition: Used Technical Data: 230/400V AC 50Hz 16A 6.3kW 20-1000°C General Information: Year of manufacture: 2007 Serial number: 172 Kedjw Dbrvopfx Ad Nswt Operating hours: 6,383 Compact tabletop unit for Plasma Electrolytic Oxidation (PEO) or Micro Arc Oxidation (MAO) Equipment for firing or annealing electronic components Designed for surface treatment processes of aluminum, magnesium, and titanium Produces ceramic coatings on metal surfaces that are particularly hard, corrosion-resistant, and temperature-resistant Programmable firing furnace with precise temperature control Maximum temperature range: up to approx. 1,000°C Heating rate: approx. 100°C/min Processing chamber: diameter approx. 112 mm (4½″), suitable for wafers up to 100 mm Application in semiconductor, micro, and nanosystem technology Ideal for research, development, and small series production Microprocessor-based control with adjustable parameters (e.g., voltage, current, time) Integrated control panel with digital displays RS-232 interface for process data monitoring and control Optional connection for process gases (e.g., N₂, H₂) Accessories: Scope of delivery as shown in the photos

Year of construction: 2024, condition: new, functionality: fully functional, Convection baking oven Powder furnace new SLS - 90 / O * D + t Transit oven divisible Memorized 1400 wide x 2000 height x 6500 depth Dimensions 1920 wide x 2810 height x 6800 depth Electric power supply Rated power 90 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on either side - passage oven Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Homogeneity < ± 3 ° C, if 180 ° C Max < ± 3 ° C Temperature of 230 ° C Max Transport: selectable Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Door double two doors on two sides (Durschlaufofen) Divisible Motor 1,1 kW 6480 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Delivery time approximately 12 to 16 weeks after ordering Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta, Peinture en poudre, thermoplastique, Verniciatura a polvere, Poederlakken, Порошковая окраска, Порошкове фарбування gemapulverbeschichtungskabine Powder coating plant Powder coating plant Powder coating cabin for powder coating Kwedocutrlepfx Ad Not Surface technology Powder gun Powder guns Einbren

Year of construction: 2017, condition: like new (used), functionality: fully functional, Fours H&C 2-level oven max 3460 mm x 2200 mm Year: 2024 Kwedpsvyzh Rofx Ad Nst Dimensions of glass supports:- Support 1 = 3260mm x 2200mm - Support 2 = 3460mm x 2200mm Approximate external dimensions of the oven: Width: 4300mm Height: 2710mm Depth: 3260mm + rails Maximum temperature: 160°C Power: S-LTD-298

Year of construction: 2012, condition: ready for operation (used), System type: Kwedpewbt N Ujfx Ad Not - Pressing station with subsequent continuous furnace (curing) and sorting station - Year of manufacture: 2012 - Condition: Fully functional Process description: - Ceramic slabs are manually placed on a buffer belt - Transport of the slabs under the pressing station - Pressing under pressure and heat - Further transport of the slabs into the continuous furnace - Curing at constant temperature Temperatures: - Pressing station: 120 °C - Continuous oven: 120 °C Oven length: 4m

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: Seriennr.: 4046, Equipment: documentation/manual, Ingot casting belt 600 Zinc melting furnace ZSO 600 / 700 B Kedpfju S N Ahex Ad Nowt

Condition: used, El. heated pit furnace, make Borel Kwsdpfx Asvv Tk Aod Not type: 6-72 temperature: max. 1050°C connected load: 90 kW clear ø: 850 mm clear height: approx. 2150 mm without lid and control cabinet

Condition: good (used), Year of construction: 2002, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. Kwodpfxswg Hlaj Ad Net No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), High temperature debinding furnace, make GERO type: HBO 50/13-3 2G heating: electrical Ksdpfx Adjhgiz Ij Nswt useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Condition: excellent (used), Walking beam-forging furnace, make Ruppmann Ksdpfxeid Im Eo Ad Nowt max. temperature: 1.250°C useable dimensions (l x w x h): 3.400 x 1350 x 120 mm throughput: 1 ton/h heating: natural gas Heating thru 4 hot air radiant ceiling Bloom burners, with flame monitoring by Kromschröder burners. Temperature measurement by thermocouples, as well as automatic and stepless temperature control. Heat exchanger, combustion air fan.

Condition: excellent (used), TECHNICAL DATA This furnace system is for recrystallization, normalization, soft annealing, stress relief, annealing and conditionally suitable for soldering. belt width: 1000 mm working height: 300 mm (over belt) heated length: 4250 mm electrical heating power: 300 kW heating zones: 4 heating temperature: 900 – 1120°C belt speed: 6 – 60 m/h (continuously adjustable) Kwodpfsgi Dv Dex Ad Njt nominal connected load: 310 kW natural gas consumption: 50 Nm3/h natural gas pressure: 30 – 50 mbar nitrogen consumption: 70 Nm3/h – on purging nitrogen pressure: 100 mbar emergency cooling water pressure: 4-6 bar furnace length: 25298 mm furnace width: 2200 mm furnace height: 2800 mm exhaust gas quantity: 1200 m3 / h

Condition: as good as new (ex-display), vacuum drying oven Inside: 700 x 700 x 600mm deep Heating capacity: 3 KW Kwsdpfxjfbl T Nj Ad Net Temperature range 1-120°C Outer dimensions: 1280 x 950 x 1280 Pressure range: Atmosphere - 0 Bar (Not suitable for overpressure) A suitable vacuum pump is provided depending on the application. Supply line: 3ph , N, PE 400V, 50Hz CEE plug The interior installation can of course be completely removed!

Condition: used, El. heated pit furnace, make Borel with air circulator Kedpfx Aovv Sw Iod Newt type: 11.85 temperature: max. 550°C connected load: 5 kW clear ø: 300 mm clear height: approx. 570 mm without control cabinet