Used Hammon Construction Elevator for sale (18,370)

Condition: ready for operation (used), A vertical upward clamping jaw elevator and a vertical downward clamping jaw elevator in stainless steel design are available. This is a conveyor system for overcoming height differences in production lines. Bottles, jars, cans and also cartons etc. can be conveyed upwards and downwards. (1) Upward elevator, output: 14,000 cans/h (empty containers open), speed: 25m/min, format diameter: 100mm, format height: 50-80mm (400g), total length with infeed and outfeed section: 2500mm, frame width: 1050mm, infeed height: 900mm, outfeed height: 2600mm, height difference: 1700mm, drives: frequency-controllable, motor power: 1.1kW. (2) Downward elevator, output: 14,000 cans/h (empty cans open), speed: 25m/min, format diameter: 100mm, format height: 80mm (400g), total length with infeed and outfeed section: 2500mm, frame width: 1050mm, infeed height: 900mm, outfeed height: 2600mm, height difference: 1700mm, drives: frequency-controllable, motor power: 1.1kW. On-site inspection is possible, were completely overhauled in the past. Fedpfsu Av Egsx Adpsfw

Condition: ready for operation (used), Year of construction: 2022, An external lift Büter Hebetechnik GmbH is available. Payload: 2000kg, lifting height: 8160mm, lifting time: approx. 45s, lowering time: approx. 45s, drive power: 6.2kW, stops: 3, ground floor height: 0mm, 1st floor height: 4450mm, 2nd floor height: 8355mm, internal dimensions X/Y: 1500mm/1260mm, largest pallet: CP2. Documentation available. An on-site inspection is possible. Ffsdpfx Aew Ext Hsdpew

Year of construction: 2016, condition: ready for operation (used), A Wiese pendulum bucket elevator in Z-shape for gentle vertical and horizontal conveying of sensitive, light bulk materials (potato chips) is available. Particle size range: 50mm-60mm, max. conveying material temperature: 30°C, moisture: dry, bulk density: 0.07t/m³, conveying capacity: approx. 14.3m³/h, belt speed: 0.22m/s, max. bucket filling: 60%, belt material: EPDM, bucket width: 476mm, support roller diameter: 95mm. Lower edge discharge: 4960mm, feed vertical shaft center: 3490mm, vertical shaft center last discharge: 1675mm. Documentation available. An on-site inspection is possible. Fjdjx H S N Djpfx Adpefw

Condition: ready for operation (used), Year of construction: 2023, A mobile diesel screw compressor unit CompAir, suitable for construction site use, is available. Volume flow: 20m³/min, max. operating pressure: 24bar, motor power: 224kW, engine: Cummins QSB6.7, chassis: height-adjustable, fuel tank capacity: 350l. Machine dimensions: approx. 5500mm/2000mm/2700mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Fjdpfoxu I Ddsx Adpsfw

Year of construction: 2007, condition: ready for operation (used), A glass and carbon roving production line (reinforcement mesh) Wilhelm Kneitz for the construction industry is available. 1) 3D production system consisting of two combined knitting machines Karl Mayer DG 6-30 2HS ELS, year of manufacture: 2007, working width: 2133.6mm, production capacity: approx. 800m²/8h, dimensions X/Y: approx. 8000mm/15000mm, weight: approx. 2600kg. 2) 2D production system consisting of one knitting machine Karl Mayer Cop HS 2-ST HG, gauge: 1/6inch, year of manufacture: 2012, working width: 2540mm, max. possible working width: 3505.2mm, dimensions X/Y: approx. 5500mm/8000mm, installation area X/Y: approx. 14000mm/18000mm. 3) Sample unit Karl Mayer Malimo 14022/PS-S2, year of manufacture: 1998, gauge: 1/6inch, optional gauge: 1/12inch, max. working width: 1270mm, installation area X/Y: 4000mm/6000mm, speed: approx. 800rpm. Documentation available. An on-site inspection is possible. Fjdpfexpw Tdox Adpofw

Condition: ready for operation (used), Year of construction: 2021, A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible. Fsdpoxu I A Tefx Adpefw

Condition: good (used), 37 Machine Tools • Years of manufacture 1970–2000 • Well-maintained condition For sale is an extensive selection of machines from a locksmith’s workshop or metalworking company, specializing in special-purpose machine construction. The total lot includes over 40 predominantly conventional machine tools, solid industrial quality, all well maintained and in full working order. Many machines have been repainted in red/blue for company identification, but are technically in good original condition. The package includes, among others: CNC Vertical Machining Center Alzmetall BAZ 15 CNC Universal Milling Machine Wemas WM3 Universal Milling Machine Deckel FP3A Guillotine Shear BRZESKA FABRYKA 2000/3 Mini Excavator / Multi-purpose device “BOBCAT” FAI 336 Two Band Saws Mössner Rekord (large and small) Cold Circular Saw Kaltenbach Mitre Saw with Table K180 Surface Grinders ABA and ST 30/50 Cylindrical Grinder MSO EDM Machine AEG-Elotherm Elbomat 400 Eccentric Press Helmerding TP8 Hydraulic Press FMA Pokorny 60080-01-5 Spindle Press 10 t Grinder Knuth Belt & Disk Sander 102800 Sandblasting Unit Tremor S.A. Vevey Column Jib Crane 500 kg Four Welding Machines TransMIG 400 Pillar Drill Siegfried Franzen Jungheinrich Pallet Stackers (electric high-lift truck) And numerous other machines, workshop equipment, and accessories. Condition: Consistently well-maintained workshop equipment, all machines functionally tested Some machines repainted in company colors (red/blue) Sturdy machines of high-quality German and European manufacture Terms & Logistics Purchase of individual items possible; removal to be handled by the buyer Ideally sold as a complete lot, available immediately, For full lot purchase, we can arrange transport and loading logistics. Viewing by appointment possible Interested? A complete machine list, technical data, photos, and pricing available on request. If you have questions or would like to arrange a viewing, please contact us. Fjdpfx Adoxx Tl Ijpjfw

Condition: used, plastic belt with flights height of the flights 15 mm distance between the flights 100 mm Fodpoyfd Smsfx Adpofw belt width 400 mm outfeed height ± 1.250 mm infeed height : ± 900 mm total dimensions : ± 1900 x 1250 x 1550 mm mobile

Condition: excellent (used), Length 5600 mmTransport height: 1800 mmSpeed: 5-25m/min Fodpfod Ti T Esx Adpsfw

Year of construction: 2019, operating hours: 2,351 h, condition: used, Transmission: Automatic Power: 218 kW (296 HP) Fsdjx R T Najpfx Adpjfw Empty weight: 36.500 kg Please contact Emal Jaweed for more information

Year of construction: 2007, condition: good (used), Oriented feeders GASSNER Dynasort DH 600 + Gassner Dynasort designed max: 36.000./h Working width 600 mm Ffedodwhr Dopfx Adpsw geared electric motor 3-4kw, 400v 50 Hz Height: 4800 mm approx If you need more information. We are here to help! Please contact us via the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2014, condition: excellent (used), 4 different sizes, from stock. Details on the photos. Manufacturer: INTERNOVI Type: PB350 Fjdpfx Adeif Uglepjfw Year of manufacture: 2014 Capacity: 12 m3 Goblet: 350mm - 7.4 liters One with discharge. Explosion-proof, stainless, low noise level. The price refers to 1 complete equipment. Current status: ready for delivery. The equipment is modular. It can also be used and assembled in other ways. Its dimensions can be changed, tailored to the task.

Condition: good (used), functionality: fully functional, empty load weight: 5,500 kg, maximum load weight: 8,500 kg, axle configuration: 2 axles, first registration: 12/2026, loading space length: 8,400 mm, Year of construction: 2006, GFÖLLNER tandem low-loader with ramps! First registration: 12/2006 Unladen weight: 5.5 tonnes! Fjdpfsydn Ddsx Adpsfw Payload: 8.5 tonnes! Load length: 8.4 metres! Austrian registration! Excellent condition! Sale price: €10,900 net Affordable delivery available! Additional photos upon request!

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Double feed vibropress Hess RH 1500, year of manufacture 2008/2009, hydraulics – 2 moulds, control unit. Hess product packaging machine, year of manufacture 2008/2009, hydraulics. Ffjdexzal Hjpfx Adpew

Condition: ready for operation (used), functionality: fully functional, Kawasaki K5V80DTP-173R-9K0E-1 main pump for Hitachi Zaxis 130W, Hitachi part no. 4601510. Service exchange unit. When we exchange the regulators with those from your old unit, the pump is also suitable for Hitachi Zaxis 160W. Ffedeyg Nwkspfx Adpow

Condition: refurbished (used), functionality: fully functional, Year of construction: 2026, machine/vehicle number: K5V80DTP, Rebuilt Kawasaki K5V80DTP main pump for 14T excavator Service exchange unit New parts: - Bearings - Cylinder blocks and valve plates Fedpfx Asyg Ntxedpjfw - Valve block - Swash plates + mounts - Drive shafts - Seal kit This pump is suitable for Hyundai Robex 140W-9, Hyundai part no. 31Q4-15020 When we exchange the regulators with those from your old unit, the pump is also suitable for (among others): Hyundai R170W-7, R150W-9, R140LC-9, R160LC-9, R180LC-9 Doosan Develon DX140LC-5, DX160LC-5 JCB JS175W Kobelco SK200SR

Condition: new, empty load weight: 860 kg, maximum load weight: 2,640 kg, overall weight: 3,500 kg, loading space length: 3,550 mm, loading space width: 200 mm, loading space height: 1,690 mm, tire size: 195/50r13c, *Low loader *construction machinery transporter tandem *for construction machinery, excavators, platforms, scissor lifts and many other vehicles. Hapert builds extremely stable *car trailers* such as this INDIGO LF-2 355x169cm. The *construction machinery trailer* is easy to load via a very stable lattice access flap. An absolute *universal trailer* not only for construction equipment but also for transporting lawn mowers, tractors, bulk goods and small vehicles. Ffedpfxen E Rm Eo Adpjw Full-length and accessible wheel arches make it easier to get out of a wheel loader. Here, the driver no longer damages the mudguard of the *car trailer*. The *machine transporter* is equipped with a stable lattice flap, parabolic suspension, automatic support wheel, accessible wheel arches, extremely stable welded and hot-dip galvanized frame and V-drawbar. We also offer accessories for machine transport trailers such as bucket storage, aluminum floor, tarpaulin with frame, lashing straps and anti-theft devices at a reasonable price.

Condition: good (used), The scope of delivery includes: 01x wooden beam, used Wood type: spruce / fir Cross-section: approx. 200 x 100mm Total length: approx. 2,800 mm Weight | piece: approx. 25.67 kg The price stated corresponds to the pick-up price for a wooden beam in the specified dimensions. Your contact person in our company: Mr.: Andre Evering Ffodevu Rq Djpfx Adpow Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for pick-up. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2020, Three-storey system construction platform from BITO The three-storey system construction platform from BITO impresses with its modular design. It enables flexible use, as it can also be set up and operated as a single-storey platform if required. Features and benefits Goods elevator: Optionally available, depending on your individual requirements. Optimum use of space: The multi-storey system (MGA) increases the degree of space utilization by up to 100 % and maximizes the usable storage area by utilizing the full height of the warehouse. Efficient storage and order picking: Direct access to all unit loads thanks to integrated shelving racks, even with a large and growing product range. Process-oriented warehouse structure: fast-moving items can be placed on the lower levels, while slow-moving items are stored at the top, increasing efficiency and speed. Technical data Manufacturer: BITO Type: C-hole profile Fjdpfx Adjvi Hxaepefw Year of construction: 2020 Total area: 684.27 m² (per floor: 228.09 m²) Levels: Floor + 2 storage levels (ground floor/1st floor/2nd floor) Floor area: 7,624 x 29,917 mm Flooring: 38 mm chipboard (white/grey) Load capacity: 500 kg/m² Floor height: 2,540 mm Clearance height: 2,250 mm Equipment: Sprinkler piping with connection to the main system Lighting on all levels (ground floor/1st floor/2nd floor) This system is ideal for companies looking for an efficient storage solution with high flexibility and optimum space utilization. Notes Stairs, elevator and staircases are not included in the scope of delivery. the lighting is also not included in the scope of delivery Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: used, 5328 - BUCKET CONVEYOR , BUCKET ELEVATOR , VERTICAL CONVEYOR , BUCKET ELEVATOR , BUCKET BELT Fjdpfxeh D R Ddo Adpofw Run-up height: 18 m Diameter of treck: 310 x 220 mm Overall size: 1050 x 350 mm x Full height: 26 m Voltage: 380 V

Condition: good (used), Year of construction: 2012, Exposé for Hall Rental Production and assembly hall ready for occupancy Fully equipped - 850 m² - Compressor system available - 40.0 t overhead crane (2 x 20 t rotating cranes) - 10.0 t overhead crane - 5.0 t gantry crane - 20.0 t overhead crane - 12.5 t overhead crane - Millutensil MIL303 spotting press - Crane hook height: 7 m - Truck entrance gate height: 4.5 x 5 meters - Workshop trolley with tools and lifting gear available - Foreman’s office and meeting room with air conditioning - Ladies and gents restroom - Lathe and grinding machine available - Fiber optic connection available (contract with Telekom possible) Available for immediate rent Location: 35232 Dautphetal, Industriestr. 9 Viewings by appointment possible Ffedpfxeygkino Adpow

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total length: 3,690 mm, total height: 8,350 mm, For sale: A robust industrial steel platform staircase with four levels, suitable for use in production halls, factories, and technical installations. The structure consists of multiple landings with fixed stairs and is made of steel, equipped with safety railings (yellow) around the platforms. The staircase is designed for intensive industrial use and provides safe access to higher installations or machinery. The construction is freestanding, stable, and suitable for fixed installation on a concrete floor. Specifications: Type: Industrial platform staircase / work platform Fjdpsyf Un Sefx Adpsfw Material: Steel Number of levels: 4 Total height: approx. 8.35 meters Landing heights: 1st level: approx. 1.81 m 2nd level: approx. 3.60 m 3rd level: approx. 5.40 m 4th level: approx. 7.22 m Width: 200 cm Length: 396 cm Staircase length (diagonal): approx. 3.96 m Design: fixed stairs with intermediate landings Safety features: railings around the platforms

Condition: excellent (used), functionality: fully functional, empty load weight: 9,800 kg, maximum load weight: 30,200 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 07/2022, next inspection (TÜV): 02/2026, loading space length: 13,800 mm, loading space width: 2,550 mm, loading space height: 870 mm, total length: 13,700 mm, suspension: air, tire size: 245.70 R 17.5, color: red, trailer brake: trailer braked, Year of construction: 2022, Equipment: ABS, tail-lift, Used Komodo low loader semi-trailer with ramps, year 2022, 3 axles with lowered gooseneck platform, 1st axle liftable and 3rd steering, EBS, 10m low deck with ground clearance 87cm, double grating ramps 4.0m long, width adjustable, side extensions, RUD side and floor hooks 8t, removable side boards on neck, air suspension, deck in wood and steel, side toolbox, large neck box, dual speed landing legs, excellent condition, inspected until 28.02.2026 – DEALER INTERDRIVE SRL-PARMA Fedpfx Asyfwdiodpsfw

Year of construction: 2006, operating hours: 704 h, condition: used, Hako Hakomatic B1100 scrubber-dryer, year of manufacture: 2006, operating hours: only 704h, previous owner: Bundeswehr, incl. charger, battery from 2006 in good condition, immediately ready for use. Ffedpfsyfvxxox Adpjw We are happy to provide you with a leasing or financing offer upon request. Mr. Mihm (tel.) will gladly assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible. = Further information = Please contact Tobias Ebert for more information.

Condition: used, Gierkink GMT 050 Felling Head Maximum Gripper Opening: 122cm Maximum Cutting Diameter: 50cm Minimum Cutting Diameter: 8cm Weight of Felling Gripper: 395kg Maximum Gripping Load: 2,500kg Recommended Hydraulic Flow: 45-80 liters/minute Maximum Operating Pressure: 250 bar Saw Blade Length: 64cm Effective Saw Blade Length: 50cm Saw Motor: 10cc piston motor Optional: We are happy to install the felling gripper to your carrier vehicle in our vehicle workshop—simply inquire. Fedpfx Adeyfvwujpefw We are an official distribution and service partner for GMT, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete GMT product range! Subject to errors and prior sale! Rental possible = More information = New: Yes Please contact Marius Herden for further information.