Used Elevators for sale (707)

Condition: new, 🔹 Quick Description of the 7 Elevators for Sale • Manufacturer: ThyssenKrupp (TK Elevator) • Models: Evolution Blue (L1–L2) and BO61 (L3–L7) • Quantity: 7 passenger elevators Hedpfx Aow R H Saofiefn L1 – Evolution Blue • 1600 kg, 2.5 m/s, 28 stops, 104 m travel • Machine-room-less, high-capacity L2 – Evolution Blue • 1100 kg, 1.75 m/s, 6 stops, 17 m travel • Compact machine-room-less unit L3–L6 – BO61 (x4 units) • 900 kg each, 3 m/s, 26 stops, 104 m travel • Rope-driven with machine room • High-speed mid-capacity models L7 – BO61 • 900 kg, 3 m/s, 26 stops, 104 m travel • Same system as L3–L6, with slightly different car dimensions ⸻ ✅ In total: • 2 Evolution Blue elevators (1100–1600 kg) • 5 BO61 elevators (900 kg each) • All modern, rope-driven passenger lifts designed for mid/high-rise use.

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit -Engine: 11.1 kW 2760 rpm -Individual components: see photos Hfedpfxowbqawj Afijn -Dimensions: 1010/480/H1050 mm -Weight: 263 kg

Condition: excellent (used), DTS Elevator screw conveyor Hfjdpfx Afopta S Hsisn Stainless elevator screw conveyor, elevates from 400mm to 1900mm, screw diameter 280mm, overall length 5000mm, top mounted water spray jets, 3Ph

Condition: good (used), Year of construction: 1985, Technical Data – Bridgeport Series I Table Size / Work Area 9″ × 49″ (approx. 299 mm × 1245 mm) T-Slots 3 slots, spacing 2.5″ (approx. 64 mm), slot width 0.625″ (approx. 16 mm) Travel Paths X (Longitudinal) without power feed: 36″ (approx. 914 mm) with power feed: 33″ (approx. 838 mm) Traverse Y (Cross Travel) 12″ (approx. 306 mm) Quill Stroke (Quill Travel) 5″ (approx. 127 mm) Knee Travel (Z-Axis/Table Elevation) 16″ (approx. 406 mm) Ram Travel (Headstock Fore/Aft on Ram) 12″ (approx. 306 mm) Min./Max. Distance Spindle Axis to Table Top (Spindle to Table Surface) min: 2.5″ (approx. 64 mm) max: 18.25″ (approx. 463 mm) Min./Max. Distance Spindle to Column Front (Min./Max. Throat) min: 6.75″ (approx. 171 mm) max: 18.75″ (approx. 476 mm) Spindle / Quill Spindle diameter: 1.875″ (approx. 48 mm) Quill diameter: 3.375″ (approx. 86 mm) Spindle taper (standard): R-8 Spindle Motor / Power 30 min. rating: 3 HP (approx. 2.2 kW) Continuous duty: 2 HP (approx. 1.5 kW) Spindle Speed Range (variable, two speed ranges) Low: 60 – 500 rpm High: 500 – 4200 rpm Hsdpfx Aoxl R N Djfisfn Drilling Capacity (Power Quill Feed, mild steel) approx. 3/8″ (approx. 9.5 mm) Milling Capacity (mild steel, cutting) approx. 2 CI/min (Cutting Inches per Minute) Drilling Radius (mild steel) up to Ø 6″ (approx. 152 mm) Traverse Speeds (X/Y) manual / automatic up to 100 ipm (approx. 2540 mm/min) in CNC models Machine Footprint & Height Floor space: 84″ × 120″ (approx. 2140 mm × 3048 mm) Overall height: 87″ (approx. 2210 mm) Net Weight / Shipping Weight Net weight: approx. 1930 lbs (approx. 875 kg) Maximum Workpiece Weight (on table) approx. 750 lbs (approx. 340 kg)

Condition: excellent (used), CATALOGUE NUMBER 7172 TECHNICAL SPECIFICATIONS - shaft width: 640 mm - max workpiece thickness: 230 mm - 4-knife shaft from above: - anti-kickback pawls - toothed, driven infeed shaft - pressure bar - planing shaft - pressure bar - smooth, driven, metal outfeed shaft Hfsdpfjp T Sx Tox Afijn - below: 2 adjustable sliding rollers set into the table - motor: 5.5 kW - electric table elevation approx. 0.25 kW - 2 feed speeds: 0.75 kW - extraction port diameter: 160 mm - dimensions L/W/H: 1320x1270x1380 mm - weight: 903 kg ADVANTAGES – German manufacture – used thickness planer, in very good condition Net price: 21,900 PLN Net price: 5,160 EUR Net price calculated at exchange rate 4.25 PLN/EUR (in case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2016, Type: Crumb breader Serial number: 3028-123044 Year of construction: 2014 Belt width outfeed: 400 mm Dimensions: 4400 x 1450 x 1800 mm Hedpjxnyprofx Afiofn Infeed belt elevator Serial number: 5083-130134-A Year of construction: 2016 Belt width: 300 mm With crumb feading screw

Condition: new, The Servomill® FPK 600 is a state-of-the-art Conventional Vertical Milling Machine designed for precision and versatility, making it an indispensable tool in mechanical manufacturing, particularly for tools and molds. This machine features a compact design that enhances flexibility and ease of operation, blending modern technology with traditional milling techniques. Equipped with advanced electronics, including electronic stops and handwheels, the Servomill® FPK 600 allows users to experience the benefits of CNC technology without the need for programming. This ensures not only high precision but also efficiency in production and education settings. With robust ball screws in all axes and powerful servomotors, the machine delivers smooth, precise movements and rapid traversing. Operators will appreciate features like the easily accessible control panel, automatic feed with programmable limit stops, and comprehensive standard equipment, including a coolant system, LED work light, and an extensive tool package. Trust in KNUTH's commitment to quality and reliability, and elevate your machining capabilities with the Servomill® FPK 600. Explore the advantages of this Conventional Vertical Milling Machine by requesting a quote today! Hfjdpfxjxb Dwgo Afijn

Condition: new, Year of construction: 2025, NIVEAU - Lift table HS 300 midi incl. swivelmax Description: ᐳ Mobile scissor lift table with platform base frame and 4 holes for holding pins; 4 swivel castors, 2 of which have brakes; wheel Ø 125 mm; operated via foot pump Load capacity in kg: 300 Weight in kg: 85 Effective stroke in mm: 610 Overall height in mm: 400 Hfsdpfx Astgychjfijn Overall height in mm: 1010 Platform size in mm: 1200 x 740 Inclusive ! Swivelmax - platform swivel frame with 2-position locking (vertical/horizontal) for panel weights up to approx. 120 kg. The swivel frame can be mounted on the platform base frame of the HS 300 midi in just a few simple steps. Even large-format panels can be swiveled from the vertical to the horizontal position by one person without any effort using this accessory. Size of the panel pivoting frame 1800 x 1480 mm Location: ex stock 54634 Bitburg - available immediately -

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Table size 800 x 400mm Max. Grinding surface 800 x 400mm Max. distance centre of spindle to table 500 mm Table speed 5 ~ 25 m/min Table guideway V & Flat way Auto. Cross feed increment approx. 0.5 ~ 20 mm Rapid power cross feed approx.900 mm/min Cross feed on hand wheel 1 rev 5mm Hedpfx Aouyk Drofiefn 1 gra 0.02 mm Rapid power head elevation 450 mm/min Vertical feed with MPG 1 rev 2 mm 1 gra 0.01 mm Auto down feed (Option) 0.001 ~ 0.999 mm/time Wheel speed 1450 rpm Wheel dimensions 406 x 50 x 127 mm Spindle motor 3,75 kW Weight 3250 kgs Dimensions LxWxH = 3205 x 2050 x 1900 mm Accessories - 800 x 400 mm magnetic table mounted - Grinding wheel mounted - Integrated dressing unit - Coolant tank - Hydraulic unit - Manuals

Condition: used, continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating net length ± 11 m width 3.100 mm all stainless steel adjustable speed variable dwell adjustment suitable for steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with outfeed conveyor belt for unloading with elevating spiral screw for loading Applications : • Blanching of vegetables and potato products • Pasteurising and/or after-pasteurising of vacuum-packed products • Cooking of sausages in natural or artificial casings • Cooking of heads and tongues • Cooking of poultry • Continuous soup production • total height 3,4 m Hedpjxnmmdsfx Afijfn

Condition: used, mileage: 755,767 km, power: 240 kW (326.31 HP), first registration: 12/2015, fuel type: diesel, number of seats: 38, gearing type: automatic, emission class: euro6, color: white, Equipment: ABS, air conditioning, parking heater, +++6 units available+++ +++Electric roof-mounted air conditioning+++ General Information Engine: DAF Emission standard: EURO 6 Total seats: 38 Seating configuration: 35+2+1 (elevated/fixed) Standing places: 55 Transmission: Automatic Safety * ABS, EBS * Fog lights * Xenon headlights * Reversing camera Passenger Compartment * Auxiliary heater * Air conditioning * Driver's microphone * Space for stroller * Wheelchair ramp * Wheelchair space * Stop request button Exterior * Matrix/destination display system * Double-width doors: 2 * Lifting/lowering system * Power steering * Tachograph card Hfodpfx Ajxngirofien * Sun visor * Electrically adjustable exterior mirrors * Roof hatches * Roof fans * Roof ventilators Miscellaneous * German registration certificate * Twin rear tyres * Vehicle length: 12.00 m * Vehicle width: 2.55 m * Vehicle height: 3.20 m * Tyre tread (front axle): approx. 20% * Tyre tread (rear axle): approx. 60% Our internal vehicle number: 11735 Subject to errors and amendments. Pictures and text may differ from the actual vehicle. Always over 300 vehicles available in our inventory.

Condition: used, Year of construction: 2006, Works number: 84.825, jib length: 20 m, current hook height: approx. 29 m (tower sections: 2x12 m / 1x4 m), ATTENTION: the 4 m tower section is not included in the scope of sale, it is third-party property. Tower system: 63 LC, max. lifting capacity: 5,000 kg. Comprising: slewing platform, jib, counter-jib, counter-jib platform, tower platforms, 4x counterweight ballast, radio remote control. Emergency stop function on the remote control is inoperative, wind-off function inactive. Crane is installed on foundation anchors within the elevator shaft. No inspection log book or further documentation available. Dismantling and removal only by qualified personnel or specialist company. Proof of qualification must be provided before collection! Construction site is located in the city center. Permit from local authorities must be applied for prior to collection. The current lessee can assist with the exchange of contact details. Viewing possible by arrangement with the current lessee. The crane is expected to be in use until January 2026. Collection by arrangement only! Hodpfx Afsxnab Uoiefn

Condition: used, Year of construction: 2009, operating hours: 17,600 h, Drive: Wheel Serial number: WLHZ1007CZK04xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21539 Hfsdpfx Asxm Th Eefien   Specifications: Model year: 2009 Certified until: 12/2025 17,600 hours (subject to slight increase) Tires (see photos) 4 support legs Pendulum undercarriage Long boom Grab attachment Elevating cab Long reach Air conditioning Radio Work lights Ready for delivery   Description: We are offering a 2009 Liebherr A934 C HD Lintronic wheeled material handler with elevating cab and grab attachment for sale.All services have been carried out regularly by the owner, and the machine is in good working condition.Some cosmetic wear and damage are present (see photos), so minor faults or defects may occur.The machine is ready for delivery. Hours: 17600 Own weight: 1 Year controlled: Yes Year controlled until: 12/25 Model: A934 C HD Lintronic Hjulmaskin m/ hevbar hytte og klype

Condition: new, Year of construction: 2025, -Smart Safety Clean Air Enhanced Efficiency -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment Seamless Integration: Hfsdpfevg U Dxox Afisn Compact, space-saving design allows for easy installation into existing machinery and workflows Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm Hfjdpfx Afjxmvb Ioion

Condition: excellent (used), functionality: fully functional, year of last overhaul: 2024, DGUV certified until: 11/2026, Boiler lifting tipper Diosna model: HK 115 For planetary kettle stainless steel 2 dumping heights DGUV V3 tested Connection 400V, 16A-CEE plug Used machine cleaned and tested with 6 months warranty Hfjdpfed Rxn Rsx Afien

Condition: good (used), Year of construction: 2011, operating hours: 806 h, axle configuration: 4x4, color: blue, Equipment: all wheel drive, Drivetrain Drive: Wheel Functional Mast: articulated arm Lifting capacity: 225 kg Working height: 1.700 cm CE mark: yes Condition Hfsdpfxsutg T Ie Afion Technical condition: good Visual appearance: good Other information Delivery terms: EXW Production country: UK Additional information Please contact Vink Machinery for more information Nifty HR 17 Hybrid 4x4 * 2011 * Diesel and batteries * 806 working hours * 17.2 meter working height * 9.4 meter horizontal reach * 225 kg lifting capacity * Net weight 5000 kg * Including elevation work platform book and manual

Condition: new, The KMT B 1304 NC is a state-of-the-art motorized guillotine shear designed for exceptional cutting performance in the category of Guillotine Shears. This robust machine features a powerful motorized drive that allows for high cutting capabilities across multiple sheet thicknesses, from 0.8 mm to 4 mm. It incorporates advanced features such as an NC control for precision cutting length positioning and a reliable plate holding device to ensure stable support. The solid steel weldment construction, combined with guided cutting blades and a servo-driven back gauge, guarantees high accuracy and repeatability. Operators will appreciate the user-friendly PLC back-gauge control with a 4.3" touchscreen, optimizing the cutting process while keeping both hands free with the mobile foot switch. Standard equipment also includes safety guards and a hold-down fixture for quality assurance on every cut. Ideal for single and small series production, the KMT B 1304 NC embodies the quality and reliability synonymous with the KNUTH brand. You can order online this premium Motorized Guillotine Shear and elevate your sheet metal processing capabilities today. Hfjdpfx Aowub Dmefisn

Condition: used, mileage: 90,616 km, power: 177 kW (240.65 HP), first registration: 03/1998, overall weight: 15,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 1998, total width: 2,400 mm, total height: 3,170 mm, Equipment: ABS, compressor, Mercedes-Benz 1524 with METZ DLK 23-12 PLC III Turntable Ladder in operational condition! ----First registration: 05.03.1998 Mileage: 90,616 km Operating hours: 3,626 h Base vehicle features: * Leaf spring suspension on rear axle * Wheelbase: 4,250 mm * Permissible gross weight: 15 t * 7-speed manual transmission * 127 l fuel tank located under rear platform * Differential lock on rear axle * Reinforced rear leaf springs and shock absorbers Hfsdpexa Sbwjfx Afion * Reinforced front torsion bar, stabilizer, and shock absorbers * Dual passenger seat bench * Exhaust pipe for fire service exiting before front axle * Engine brake * Anti-lock braking system (ABS) * Traction control system (ASR) * Fog lights * Hour meter * Headrest for driver * 2 headrests for passenger seats * Rear wall of cab with 2 windows * Electric window lift right side * Heated, electrically adjustable exterior mirrors with wide-angle section * Ramp mirror right side * Blue rotating beacon and Martin horn * Front blue flashers Turntable ladder superstructure features: * Metz turntable ladder DLK 23-12 PLC III with rescue basket (rescue height approx. 30.75 m). Max. elevation angle: 75 degrees, max. basket load: 270 kg, nominal rescue height: 23 m, nominal outreach: 12 m, stabilizers: horizontal/vertical, adjustable stabilizer width between 2,400 mm and 4,500 mm * Folding rescue basket for 3 persons * 2 x 24V LED spotlights at front of rescue basket * Lifting lug at tip of lower ladder section from reinforced ladder set for lifting, lowering, and swiveling loads * Mount for portable 5 kVA generator at rotating platform * 2 x 24V/70W halogen spotlights at head of lower ladder section, teleflex-controlled from main operator station * 400V power supply protected in ladder set to tip of upper ladder incl. socket and power feed with plug for generator at rotating platform * Derivation cable from head of upper ladder to rescue basket with 1 x 400V and 2 x 230V sockets in basket * Fixed water conduit in lower ladder section * Detachable nozzle in rescue basket * Storage holder for nozzle * METZ stretcher mount SLK 111 incl. holder on platform * Compartment for stretcher storage in platform * Martin horn with 4 trumpets instead of BOSCH loud horns * Permanently installed charger 230V / 24V * Service manual available, all maintenance performed annually ----Immediately ready-to-use vehicle from first owner in well-maintained condition! New safety inspection (SP) New general inspection (HU) Non-smoking vehicle! Your contact for this vehicle: ---- Daniel Seidler Phone: Mobile: (also WhatsApp) Email: Subject to changes, prior sale and errors!

Condition: ready for operation (used), functionality: fully functional, Nimo-KG SK 800 MK 2 elevator for big plastic crates or normal meat bins 200 liters or 300 liters. Year of construction 2014 Maximum measure big boxes Wide 125 cm Deep 107 cm Hight 80 cm. Hjdpsxl Tp Hjfx Afisfn Tipping hight 193 cm.

Condition: new, functionality: fully functional, machine/vehicle number: 1.161-070.0, working width: 510 mm, area performance: 2,805 m²/h, warranty duration: 24 months, water tank capacity: 70 l, noise level: 66 dB, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.161-070.0 Drive type: Battery (not included in the set) Drive: Traction motor Brush working width (mm): 510 Vacuum working width (mm): 900 Hsdpfxoxnzuij Afiofn Fresh/dirty water tank capacity (l): 70 / 75 Theoretical area performance (m²/h): 2805 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 13 / 20 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Gross weight (kg): 345 Weight without accessories (kg): 100 Dimensions (L × W × H) (mm): 1310 × 590 × 1060 Scope of delivery and equipment: The set includes NO batteries and NO charger Squeegee 900mm V-shaped with oil-resistant polyurethane rubbers Disc brush 510mm red - medium-hard Features: Powerful drive Automatic water stop Solenoid valve 2-tank system The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: - Self-explanatory symbols and a clear control panel. Short training phases. Easy handling thanks to a few yellow-coded controls. - Robust construction with integrated disc brush head. High area performance thanks to the large working width. Brushes are changed via pedal ejection. - Particularly maneuverable machine. Good overview of the surfaces to be cleaned. Easy transport. Key features: - Thanks to its slim and compact design, our battery-powered ride-on scrubber-dryer BD 50/70 R Bp Pack Classic with disc brush technology is extremely easy to maneuver and transport – even in elevators, for example. This positions the affordable entry-level model as a viable alternative to walk-behind scrubbers.

Condition: new, overall weight: 39,000 kg, empty load weight: 9,500 kg, maximum load weight: 29,500 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,500 mm, loading space height: 4,000 mm, suspension: air, color: other, tire size: 385/65r22,5, Year of construction: 2026, machine/vehicle number: 82310001, Equipment: ABS, tail-lift,   New BERDEX pig trailer with 3 layers.     * Folding floors     * tail lift     * 3 axles not steered     * Can be equipped with type 2 for long distance traffic     * Folding-lift roof     * 101 m2          Nouvelle remorque porcine BERDEX à 3 couches.     * Planchers pliants     * Monte-charge     * 3 essieux non directeurs     Hfedpfxskmf Uij Afijn * Peut être équipé du type 2 pour le trafic longue distance     * Toit escamotable     * 101 m2          Nuevo remolque para cerdos BERDEX con 3 capas.     * Pisos plegables     * Elevador de carga     * 3 ejes no dirigidos     * Puede equiparse con tipo 2 para tráfico de larga distancia     * Techo elevable abatible     * 101 m2                    

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 230 kg, lifting height: 7,600 mm, empty load weight: 1,300 kg, construction height: 1,650 mm, fuel type: electric, total length: 1,520 mm, drive type: Elektro, construction width: 810 mm, Scissor lift Mast type: None Hfjdpfoxl Ichsx Afisn Technical condition: New Front tires type: Solid rubber Front tires condition: 100% Rear tires type: Solid rubber Rear tires condition: 100% Description: New unit, Max. load capacity: 230 kg, Load capacity extended: 113 kg, Max. number of persons (indoor/outdoor): 2/0, Working height: 7.60 m, Platform height: 5.60 m, Overall length: 1.52 m, Overall width: 0.81 m, Overall height (rails unfolded): 2.01 m, Transport height (rails folded): 1.65 m, Platform length: 1.37 m, Platform width: 0.70 m, Platform extension: 0.60 m, Ground clearance (stowed): 6 cm, Ground clearance (elevated): 1.50 cm, Wheelbase: 1.13 m, Drive: Electric drive, Turning radius (inside): 45 cm, Turning radius (outside): 1.60 m, Drive motor: 2×24VDC/0.5kW, Lift motor: 24VDC/2.2kW, Speed (retracted): 4 km/h, Speed (extended): 0.60 km/h, Battery capacity: 24V/115Ah, Integrated charger: 24V/15A, Gradeability: 25%, Max. tilt: 1.5°/3°, Non-marking tires: 230x100 mm, Weight (CE): 1,300 kg Proportional controls,

Condition: like new (used), Item: D-7033-Elevator Elevator with plastic conveyor, Stainless Steel support structure, Dimension: Length: 2000 mm, Approach H.: 250 mm Hsdpfx Afjitk D Aoisfn Discharge H.: 1050 mm, Width: 250 mm Flight H.: 30 mm Distance: 250 mm

Condition: used, Drive electric motor, 8.5/1.4kW, angular drive, clutch, brake elevator motor Drive electric motor, 8, 5/1, 4kW, rev. 9-54 angle drive Lift motor Ziehl-Abegg Rfzu180.31-2/12 380V / 50Hz 8, 5/1, 4kW Drive torque: 1114 Nm Rev.: 9-54 rpm Hedeud H Hbopfx Afijfn Angular drive, clutch, brake gear several pieces for sale from stock.