Used Primus for sale (66)

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Psdpfjrt U Nuox Aalepl Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram Ppsdpfx Aertd Uwjalol - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: ready for operation (used), Year of construction: 2019, total height: 4,125 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, overall weight: 5,530 kg, table load: 4,500 kg, number of axes: 3, This 3-Axis Mora Primus 152012 was manufactured in 2019. It features a large measuring range with X-axis at 1500 mm, Y-axis at 2000 mm, and Z-axis at 1200 mm. Supports a maximum load of 4500 kg, ensuring robustness for various tasks. With a vector speed up to 519 mm/s, it offers efficient operations. If you are looking to get high quality measuring capabilities consider the Mora Primus 152012 machine we have for sale. Contact us for more information. Additional equipment • 3-axis CNC controller, Pantec SP25/SP600 interface, EAGLE PAD joystick (6.5 m) • Renishaw PH10M (720 positions, 7.5°) + PHC10-2 controller • Renishaw SP25M full kit: SM25-1/-2/-3 (with SH25-1/-2/-3), TM25-20 adapter; extra SM25-4 (with SH25-4) & SM25-5 (with SH25-5) • Extensive M2/M3 stylus kits (Ø 0.3–30 mm, extensions), M2↔M3 / M3↔M2 adapters • FCR25 + FCR25-TC (3+3-port, temperature-controlled) with MRS1000/MRS600 rail system • Ø 30 mm reference sphere • INCA3D Premium (DCC): Shape Deviation, Path Wizard, Simulation, Statistics, Excel reports, graphical programming, CAD import IGES/STEP, Master Scan Functions + Assist SP25, FCR25 support, USB dongles (HASPHL) • Industrial PC (e.g., Intel i5, 8 GB, 256 GB SSD, 22″ monitor, Windows 10) + color laser printer Machine Benefits Qualitative Machine Benefits • Condition: new, factory-sealed, immediate availability Technical Machine Benefits • Accuracy (iso 10360, typical with sp25m): mpee 3. 0 + l/300 µm | mpep 3. 0 µm | mpe_thp 4. 4 µm / 68 s Pjdpfxjyaacqj Aalopl • Dynamics: up to 519 mm/s | 1,732 mm/s² • Probing/scanning: renishaw ph10m + sp25m (sm25-1…-5), fcr25/fcr25-tc (temperature-controlled) • Software: inca3d premium (iges/step, scan options) • Operating conditions: 20 °c ±2 °c; temperature gradients ≤ 1 °c/h and ≤ 1 °c/m • Pneumatics: 6 bar, dry and oil/particle-free • Power (controller): 90–240 v, 50/60 hz, 16 a; approx. 600 va (psu up to 2,000 va) Dimensions Machine Depth 2505 mm

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected under power. Technical specifications: Pjdex Htf Hepfx Aaljpl Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed range: 30 – 3000 rpm Tailstock: MK 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and feed spindle table lathe in excellent condition! Technical specifications: >> Machine no. 2801 >> Center height 120 mm >> Center distance 430 mm Ppsdpfxev Tyzco Aaljl >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short-taper spindle head DIN 55027 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tool About the machine: Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.) A digital display is available for an additional charge.

Year of construction: 2015, condition: used, For Sale: Variovac Primus – Year of Manufacture 2015 more photo's will follow soon, currently being serviced. We offer a well-maintained Variovac Primus thermoforming packaging machine, manufactured in 2015, designed for reliable and efficient food packaging applications. This machine is widely used in the food industry for vacuum and MAP packaging of fresh and processed products. Key Features - Thermoforming packaging machine - Suitable for vacuum and Modified Atmosphere Packaging (MAP) - Robust industrial design for continuous production - Hygienic construction, ideal for food processing environments - User-friendly control system - Proven Variovac quality and reliability Applications - Meat and poultry - Cheese and dairy products - Fish and seafood - Ready meals and convenience foods - Other food and non-food products requiring high-quality packaging Condition - Year: 2015 - Good working condition - Professionally maintained Ppsdoyan D Nspfx Aalsl - Available for inspection by appointment Advantages - High packaging quality with consistent results - Durable German engineering - Suitable for medium to high production volumes - Easy integration into existing production lines 📍 Location: Available from stock 🚚 Worldwide transport possible upon request For more information, specifications, pricing, or to arrange a viewing, please contact us. * Year: 2015

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 140 mm, center width: 500 mm, spindle speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, We are offering for sale a WEILER Primus VC lathe. This model series is particularly distinguished by the Siemens control panel and the fully stepless speed regulation. As the name suggests, the VC can operate with constant cutting speed. The machine has undergone extensive inspection in our workshop and is in excellent geometric, technical, and visual condition. All guides are in good order, the gearboxes run quietly, and the levers are easy to operate. We cordially invite you to test the Primus VC at our premises. We look forward to your inquiry! Availability: Immediately Centre height: 140 mm Centre distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Available thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE declaration of conformity, and much more on request. Psdpfsyalurjx Aaljpl Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are at least workshop-tested - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can perform a complete or partial overhaul of your chosen machine - Upon request, we can repaint your chosen machine in the color of your choice - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety features - We are happy to handle shipping and/or installation for you

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 140 mm, turning length: 500 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 30 rpm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 30 rpm, Equipment: rotational speed infinitely variable, Distance between centers: 500 mm Pedpevnr E Nofx Aalspl Center height: 140 mm Spindle bore: 40 mm Speed: 30 - 4000 rpm Weight: approx. 800 kg Dimensions: approx. 1430 x 935 x 1550 mm Accessories: Operating instructions, lamp, multi-fix holder, collet chuck (at extra cost) Other accessories on request

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, warranty duration: 6 months, DGUV certified until: 11/2026, type of input current: AC, total length: 700 mm, total width: 800 mm, total height: 1,050 mm, control voltage: 24 V, input frequency: 50 Hz, space requirement height: 1,050 mm, space requirement length: 700 mm, space requirement width: 800 mm, Bread Slicing Machine Treif Primus 400 Treif Primus 400 "The Premium Model" Rotary Blade Machine Stainless Steel Construction Blade newly sharpened and recoated Optimal cut for your bread Operation via easy one rotary control Adjustable slice thickness from 4 - 24 mm Dimensions: 800 x 700 x 1050 mm (W x D x H) Robust engineering 230V connection, ready to plug in Used machine, cleaned With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Maintenance contract Spare blades E-Box Service package Delivery service Ppodpfexp Uhfex Aalel Introduction & commissioning Visit our large bread slicing machine exhibition!

Condition: excellent (used), Year of construction: 2017, Weiler Primus VCD (2017) Precision Lathe Manufacturer: Weiler Model: Primus VCD Precision Lathe Year of manufacture: 2017 Condition: used, very good, as new, recently serviced according to factory specifications with acceptance protocol Scope of delivery: Ppodpfjx Nkdxex Aalsl - Documentation

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, For sale is a lathe of the brand Weiler type Primus LZ-GS The machine is in very good condition Technical data Year of construction 1989 Machine no. 4443 Operating voltage 380 V Center height 120 mm Center width 430 mm Speed:60 - 3000 rpm in 18 gear stages Spindle clearance 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feed rates from 0.03 to 0.15 mm /rev Ppodpfeihig Ijx Aalel Possible threads metric, inch, module and diametral pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, functionality: limited functionality, machine/vehicle number: FS 40, total height: 420 mm, For sale is a Geibel and Hotz surface grinding machine The Z-axis feed has a problem, otherwise the machine is in good condition. Technical data: Slide / X-axis: Table stroke max.: 420 mm Table stroke min.: 150 mm Number of table strokes/min at 400 mm stroke: max. 54 Total length with all covers: 420 mm Z-axis: 205 mm Cover: FS 40 Hanging plates, number: 2 Length: 1270 mm Cross spindle: Pitch: Tr. 30 x 3 Handwheel scaling: 1 turn = 3 mm Handwheel limit switch: P - U1ST Fine adjustment: 0.020 mm Lubrication Spindle nut: Flat track: good Dimensions: Total height (with spindle protection): 2250 mm Height without spindle protection: 1850 mm Table width: 600 mm Total width: 1720 mm Table depth: 1310 mm If requested, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewings possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Pjdpfxjv E Hn Ts Aaljpl Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature Control Unit plasma plasTemp Primus 90 Stock No.: 503642 Machine/Device Type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of Manufacture: 2018 Ppsdpjx A Swdjfx Aalsl Technical Data for plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50: - Circulation medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW - via two stainless steel tubular heaters - made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference of 80 K between tool inlet and cooling water; minimum pressure difference in cooling water circuit: 3 bar - Pump: Bronze submersible pump, Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Microprocessor controller, self-optimizing SBC - with digital display of setpoint and actual values for supply temperature • Maximum temperature monitoring • Automatic filling system with level monitoring • Output socket for collective fault signal • Acoustic alarm buzzer for alerts • Operating hours counter • Heating control via Solid State Relay (SSR) • Leak monitoring • Leak stop mode (suction operation) • Extraction function for tool change • Manual fill option • Dirt filter • Unit mounted on rubberized castors • Connections: Tool hose connector G 1/2" (14 mm), Cooling water hose connector G3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulation medium: Water

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Ppjdpfx Aaox A Svtjljl Stock no.: 503636 Machine type/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160° Heating capacity: 9 kW Circulation medium: Water

Year of construction: 1986, condition: used, Weiler Primus lathe year ca.1986, three-jaw chuck , Multifix. Machine in a good condition , By arrangement under power ready for demonstration. Pedpfx Aen Ard Dealopl

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen - Ppsdpfx Asv D Ip Nsalsl

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 9123, Year of construction: 2008, massive, rigid milling machine for large posts with a milling cutter that can be adjusted steplessly vertically manual feed 2.2 kW 400V motor 2,800 rpm milling cutter speed maximum milling cutter diameter 300mm profile mounted at an angle of 20°-90°-20° (according to the scale) maximum cut-out width 400mm (at an angle of 90°) maximum cut-out depth 110mm maximum profile height 190mm Pedpfx Aswhpk Iealepl stepless milling height adjustment (handwheel and scale), adjustment range 0 - 100mm quick cutter change system pneumatic material clamping cooling and lubrication system

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pedpfedx R Dtjx Aalepl Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Pressing force max. 3500 daN (kg) at Concept Primus • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Ppedpfex Eg T Eox Aalsl

Condition: good (used), functionality: fully functional, used fat fryer Habersang Primus 5/E Automatik, checked and tested, inner dimensions 185 cm wide, 70 cm deep, for about 96 pastries, Siemens S590U control, serial no. 84710/001150, 9 kW, 380 V, 50 Hz Ppsdpfex Dx Aisx Aaljl

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 230 V, Bread slicer Treif Primus Fusion - Bread slicing machine Treif Maschinenbau GmbH - Under counter bread slicer - Model: Primus fusion - bread cutting machine - Cutting width adjustable from 5 to 14mm - 220- 230 V - Year of construction 2020 - Machine weight: 230 kg Podpfsvbc Hkox Aaljpl

Year of construction: 2005, condition: used, Maximum cutter diameter: 300 mm Manual milling feed Angle stop infinitely adjustable with locking points Max. release depth: 110 mm Max. profile height: 190 mm Ppjdpsu T N D Uefx Aalsl Max. cutter package height: 95 mm Pneumatic material clamps Spray device Very good condition

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Pedpjw I A Uxefx Aalopl Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels Psdpou Aftgofx Aalepl To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition. Pedpfx Aaovtp Edsljpl