Used Ham Mold for sale (2,776)

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt, and safety enclosure / Machine in excellent technical condition Year of manufacture: 2017 Injection Unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1984 bar Dosage volume: 226 cm³ Clamping Unit: Clamping force: 150 t Tie bar spacing: 510 x 510 mm Platen size: 740 x 740 mm Ejector: hydraulic Clamping mechanism: toggle lever Control system: B&R touchscreen Additional equipment: Hybrid machine: high-speed, energy-efficient, and extremely quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control unit x 36 (available at extra cost) Injection unit is wear-resistant and corrosion-proof Main drive motor – servo motor driven by inverter Central lubrication Machine equipped with cylinder/battery with compressed nitrogen (additional charge for rapid operation) Wemo 6-5 xDesign Robot Year of manufacture: 2017 4-axis robot: 3 axes are servo motor driven (electric) Robot safety package Robot with adapter, Wemo WCS-R conveyor, and safety enclosure Purchase of robot and conveyor at a surcharge Dimensions: Weight: 7,500 kg Length/Width/Height: 6.10 x 1.97 x 2.60 m Drive: Pump/motor: 11.5 kW Heating power: 11.3 kW Total power: 22.8 kW All machines offered are started up by our service technicians prior to sale. Bwodpfx Ajy Sludslbsn It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: €25,000.00 net

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron K-TEC 350-2650 / Production line with Sepro robot Year of manufacture: 2017 Injection unit: Screw diameter: 70 mm Shot weight: 1,104 g Injection pressure: 2,175 bar Dosage volume: 1,213 cm³ Clamping unit: Clamping force: 350 t Tie bar distance: 750 x 750 mm Platen size: 1,110 x 1,165 mm Bwsdpfx Ajy Sltyjlbjn Ejector: hydraulic Clamping unit: hydraulic Control system: MOSAIC - touchscreen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h (automatic mode) Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 3 Hot runner control Hardened injection unit - bimetallic Proportional valve on injection unit – precise injection Parallel movements Machine equipped with cylinder / nitrogen accumulator (additional charge for high-speed operation) Energy-efficient machine – features a system with three variable output hydraulic pumps Machine has been regularly serviced by authorized service in Germany Dimensions: Weight: 22,000 kg Length/Width/Height: 8.62 x 2.21 x 2.80 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the selected machine’s technical tests or participate in live technical demonstrations at our premises in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1998, Ferromatik Milacron K110D-S/2F / 2K injection molding machine Year of construction: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Injection pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Distance between tie bars: 470x470 mm Size of the clamping platens: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Bwodsy Slriopfx Alben Control system: Ferromatik Milacron Additional equipment: 2-component injection molding machine Euromap 67 Robot interface Hydraulic core pull x 4 Control system with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in the vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine has been regularly serviced The service center recently replaced the machine's cylinder with screw and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/width/height: 5.00x1.60x3.60 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 1992, operating hours: 17,000 h, functionality: fully functional, clamping force: 40,000 kN, screw diameter: 240 mm, clearance between the columns: 2,100 mm, injection pressure: 1,500 bar, injection weight: 48,000 g, ejector stroke: 700 mm, total length: 26,000 mm, total width: 5,000 mm, total height: 7,000 mm, overall weight: 380,000 kg, MANUFACTURER REMU Model / Type RM 4000 Enjeksiyon Ünitesi / Injection Unit Üretim Yılı / Production Year 1992 Üretim Yılı / Made In Italy Kalıp Sıkıştırma Kuvveti / Mould Clamping Force (kN) 40000 Kolon Arası Mesafe / Space Between Tie Bars (mm) 2100 X 2100 Pompa Motoru / Pump Motor kW Vida çapı / Screw Dıameter (mm) 240 Enjeksiyon Basıncı / Injection Pressure (bar) 1500 Maks. Short Ağırlığı / Maks. Shot wightPS (gr) 48000 Isıtma Kapasitesi / Heating Capacity (kW) 235 Pompa Motoru / Pump Motor kW 595 Toplam Güç / Total Power (kW) 830 Sıkıştırma Ünitesi / Clamping Unit Mak. Kalıp Kalınlığı / Max. Mould Thickness (mm) 2000 Min. Kalıp Kalınlığı /Min. Mould thickness(mm) 800 Ejektor stroke (mm) 700 Maksimum Mengene Açıklığı / Max.Daylight (mm) 4500 Yağ Tankı Kapasitesi / Oil Tamk Capacity(lt) 9000 Makine Ölçüleri / Machine Dimension LxWxH(m) 26*5*7 Makine Ağırlığı / Machine Weight(ton) 380 Vida Stroğu / Screw Stroke (mm) 1400 Mak. Erimiş Plastik Miktarı / Max.Shot Molten plastic weight(gr) 34560 "Mak. Atış ağırlığ PE /Max. Shot weight per 1mm (gr)" 24,68571429 Gerçek Değer / Actual Value (gr/h 26,8 Maks. Enjeksiyon Ağırlığı PE (gr) 35136 Maks. Enjeksiyon Ağırlığı PP (gr) 35136 Makine Meme radüsü / Machine Nozzle Radius R34 Sabit Flanş Ölçüsü / Fixed Side Flange Size ᴓ300 Hareketli Taraf Flanş ölçüsü / Moving Side Flange Size ᴓ250 Hava / AİR (sabit - hareketli) 2+4 Hydraulic Cores 4+4 Kalıp Frigel su bağlantıları / Mold Frigel Water Connections 2'' Kalıp Sıcak Yolluk Kontrol ( adet ) /Mold Hot Runner Control (pcs) 40 Valfgate sistemi / Valvegate System (pcs) 16 (Aktif) manyetik Plaka / Magnetic Plate var Bwodeylva Nepfx Alben "Kalıp Taşıma Kapasitesi ( Sabit - hareketli ) / Mold Carrying Capacity (fixed - moving) (tons)" 21,8-18,7 Robot var

Condition: used, Year of construction: 2011, operating hours: 13,000 h, functionality: fully functional, clamping force: 39,240 kN, screw diameter: 245 mm, clearance between the columns: 2,250 mm, injection pressure: 1,200 bar, injection weight: 47,685 g, overall weight: 320,000 kg, heating capacity: 354 kW (481.31 HP), MANUFACTURER REAL PRESS Model / Type RP 4000 T Üretim Yılı / Production Year 2011 Üretim Yılı / Made In Italy Kalıp Sıkıştırma Kuvveti / Mould Clamping Force (kN) 39240 Kolon Arası Mesafe / Space Between Tie Bars (mm) 2250*2250 Vida çapı / Screw Dıameter (mm) 245 Enjeksiyon Basıncı / Injection Pressure (bar) 1200 Maks. Short Ağırlığı / Maks. Shot wightPS (gr) 47685 Isıtma Kapasitesi / Heating Capacity (kW) 354 Pompa Motoru / Pump Motor kW 132+132+132+30 Toplam Güç / Total Power (kW) 790 Mak. Kalıp Kalınlığı / Max. Mould Thickness (mm) 2200 Min. Kalıp Kalınlığı /Min. Mould thickness(mm) 1000 Makine Ölçüleri / Machine Dimension LxWxH(m) 22×45×50 Makine Ağırlığı / Machine Weight(ton) 320 Vida Stroğu / Screw Stroke (mm) 245 Mak. Erimiş Plastik Miktarı / Max.Shot Molten plastic weight(gr) 34333,2 "Mak. Atış ağırlığ PE /Max. Shot weight per 1mm (gr)" 140,1355102 Sabit Flanş Ölçüsü / Fixed Side Flange Size ᴓ250 Hareketli Taraf Flanş ölçüsü / Moving Side Flange Size ᴓ250 Robot VAR Bodpfxoylwz Ij Albewn

Condition: used, Year of construction: 2013, Injection molding machine Arburg 630H 2500-1300, year of manufacture 2013 Bwedpfx Ajy Tv E Nolben Injection molding machine Husky H4 300 RS55/50, year of manufacture 2018

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, displacement volume: 41 cm³, injection pressure: 2,800 bar, injection weight: 37 g, mold height (min.): 210 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Bwsdpsy Tvvnjfx Alben Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg Bwsdpsx Sqi Hefx Albon TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: used, Year of construction: 2005, Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph The Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph efficiently delivers continuous production in the bottling sector. Manufactured in 2005, this machine currently operates and, importantly, remains available for on-site inspection until March 2025. Technical Features of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine, model SR8, features 8 cavities for bottle formation. Consequently, this configuration produces 12,000 bottles of 0.5 liters per hour. For larger formats, such as bottles of 1.5 liters and 2 liters, it achieves a production speed of 9,600 bph. Moreover, the 18-81 bottle neck type guarantees compatibility with a wide range of caps and closures, making it adaptable to diverse production needs. Thus, this standard ensures precise sealing and airtight closures.. Main Components of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine integrates a preform loader, a preform elevator, and a preform orientator, which work in harmony to provide an automated and efficient feeding process. Preform loader: This component loads preforms from the storage area or initial container and transfers them seamlessly to the elevator system. Consequently, it ensures continuous feeding without manual interruptions. Preform elevator: The elevator lifts the preforms from the lower level to the machine’s operating level, ensuring a continuous flow to the orientator and minimizing downtime. Therefore, production proceeds smoothly. Preform orientator: The orientator positions and aligns each preform correctly before inserting them into the blow molding cavities. Additionally, using mechanical guides or vibrations, it prevents misaligned preforms from entering the process. Bwjdpfjvv E Hiex Alben The integrated tipper tilts and discharges large quantities of preforms, typically stored in containers or boxes, in a controlled manner. Subsequently, the tipper feeds the preforms into the production line, maintaining a consistent flow while preventing overloads and blockages. By automating this process, the tipper reduces manual handling and significantly increases safety and productivity. The unscrambler plays a key role in separating and aligning the preforms before their insertion into the blow molding cavities. Specifically, by applying rotation and vibration, the unscrambler ensures optimal positioning, minimizing errors and machine stoppages. Hence, the combined action of the tipper and unscrambler maximizes production line efficiency and guarantees product quality. Furthermore, the machine’s rotary configuration facilitates continuous and stable production, which is ideal for high-intensity manufacturing. Its rotary technology, as a result, distributes heat evenly during the blowing process, ensuring high-quality output. Safety and Documentation The blow molding machine includes technical manuals and safety protections.

Condition: used, Year of construction: 2022, operating hours: 7,148 h, functionality: fully functional, machine/vehicle number: 252315, clamping force: 17,000 kN, screw diameter: 120 mm, displacement volume: 7,729 cm³, mold height (min.): 800 mm, ejector force: 230,000 N, ejector stroke: 300 mm, opening stroke: 2,550 mm, plate length: 2,420 mm, plate width: 2,170 mm, pressure: 2,300 bar, type of input current: three-phase, input frequency: 50 Hz, For sale is a modern and fully equipped production cell consisting of an ENGEL DUO 12060/1700 hydraulic injection molding machine and an ENGEL VIPER 60 RC300 Integrated linear robot. The machine was manufactured in 2024 and is designed for the production of large technical parts, automotive components, industrial containers, and parts with high quality requirements. ENGEL DUO 12060/1700 Injection Molding Machine Key parameters: - Clamping force: 17,000 kN (1700 tons) Bwodpfx Alsy Tuhieben - Injection unit: 12060 - Screw diameter: 120 mm - Injection volume: up to 7729 cm³ - Injection pressure: up to 2300 bar - Injection rate: up to 1875 cm³/s - Opening stroke: 2550 mm - Maximum mold platen distance: 3350 mm - Platen dimensions: 2420 × 2170 mm - Drive power: 176 kW - Control system: ENGEL CC300 - Control language: Polish / English Machine equipment: - ENGEL ecodrive servo hydraulics energy-saving system - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interfaces - Extended mold cooling - Special design for the automotive industry - PL documentation - Special industrial ENGEL coating Includes ENGEL VIPER 60 RC300 Integrated robot Complete automation of production integrated with the machine. Robot parameters: Model: ENGEL VIPER 60 RC300 - Payload: up to 47 kg - Z-axis stroke: 4280 mm - X-axis stroke: 1800 mm - Y-axis stroke: 2600 mm - Servo axes B and C - Full integration with CC300 - HOP C10 operator panel - Automatic lubrication - PL/EN control - FB100 conveyor belt included - Complete safety guarding

Condition: excellent (used), Year of construction: 2017, Krauss Maffei KM 350-3000 CX injection molding machine Year of manufacture: 2017 Fully hydraulic clamping system. MC6 control system based on industrial PC technology with real-time Ethernet, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running processes (ProcessDesigner). Plasticizing unit Complete plasticizing unit for thermoplastics, with abrasive protection, 80 mm screw diameter, equipped with a backflow valve and an open nozzle. TECHNICAL DATA OF THE MACHINE – STANDARD VERSION Clamping unit Clamping force: 3500 kN Opening force: 221 kN Dimensions of the mounting plates (h x v): 1060 x 1095 mm Distance between columns (h x v): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold height: 380 mm Maximum opening width: 1300 mm Ejector stroke: 250 mm Ejector force front/rear: 95/49 kN Injection unit Screw diameter: 80 mm L/D ratio: 20.0 Injection pressure: 1855 bar Injection volume: 1608 cm³ Injection weight: 1464 g Injection speed: 95 mm/s Injection rate: 478 cm³/s Standard screw speed: 220 rpm Plasticizing rate: 109.5 g/s Electrical and hydraulic equipment Rated power of the pump motor: 75 kW Installed power of the heaters: 36 kW Number of heating zones in the cylinder: 7 Dry cycle time / stroke according to Euromap 6: 2.3 s / 497 mm Oil tank capacity: 720 dm³ Dimensions and weight Bjdpfx Aloy Tp Rlebown Net weight including control cabinet: 16.3 t Machine dimensions (l x w x h): 7.21 x 2.17 x 2.25 m

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, year of last overhaul: 2024, compressed air connection: 10 bar, We offer 2 HUSKY machines. Available technical specifications for the HUSKY 2 machine, produced on 18/12/24, 23.5 GR, as per the listed data: Model: GL 6L 300 PET Type: P 100/120 E100 Series: 3.0 TONNE Hydraulic pressure: 180 BAR Weight: 57,800 kg Number: 14065 Date: 98/02/04 Encore Husky Package 20 Serial Number: 54360P Code: S2PP-N01 Reference Number: 726698 Year: 3123-64 Additional Information: Hot Runner and Mold Weight: 2315 gr (72) CAV MOLD 48 gr 2 lit. 28 gr 0.5 lit. HOT RUNNER 48 CAV MAAI 48 CAV MAAI 48 CAV KOBOTS / ROBOTS 48 – 1.4 – 27 gr 28 gr Available technical specifications for the HUSKY 1 machine, produced on 29/11/24, 10.5 GR, as per the listed data: HUSKY 1 type P100/120 E100 14/04/1998 SERIES 300 TONNER HYD. PRESSURE: 180 BAR WEIGHT: 21,600 kg Material / Specifications NOVTCO GL300 PET P 100/120 E100 3L Dates DATE: 14/3/14 DATE: 98/04/14 Details AW 5830-A01 72698 E. 3293-111 Remarks ENCORE HUSKY EXTENSION (2)T AP PERIOD 543588 HOT RUNNER AND MOLD 1QTS 92 (F2) WATER CAVITY The machines come with many spare parts and molds, as well as all auxiliary production machines, such as a Bwjdpjy Tpfiofx Albjn plastic preform production or PET packaging line: The resin is stored in hoppers. It is dried using a dryer/dehumidifier. It is transferred to the Husky machine via vacuum pumps. The injection molding machine produces the preforms. The water circuit cools the molds and robots. There are filters, metal detectors, and conveyors for material and scrap management. The two lines are almost identical, with separate equipment for each line (No1 and No2). Code Description Function HUSKY Husky Machine Injection molding machine DRYER Dryer Drying of plastic resin FAN Fan Air circulation / cooling CONVEYING RESIN TO HOPPER Resin Transfer Transfer of raw material to hopper VACUUM PUMP Vacuum Pump Creating a vacuum for material transfer WATER PUMP Water Pump Circulation of cooling water DEHUMIDIFIER Dehumidifier Removal of moisture from air/resin RESIN HOPPER Resin Hopper Storage and feeding of material COMPRESSOR Compressor Supply of compressed air AIR TANK Air Tank Storage of compressed air WATER FILTER Water Filter Filtering of cooling circuit METAL DETECTOR Metal Detector Checking material for metal objects PLASTIC SYSTEM CONVEYOR Plastic System Conveyor Transfer of product/material PREFORM BREAKER Preform Breaker Breaking of rejected preforms STRAP Strapping Machine Binding of packaging OVERHEAD CRANE Overhead Crane Lifting loads

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 12915769, The used unscrewing unit (2 directions, for 270C / 370C) from Arburg is used to automatically demold plastic parts with internal or external threads from the injection molding tool by precisely unscrewing the thread core during or after the opening process. Medium size Dimensions: 150x250x400 mm Bsdsy Tm A Espfx Albown Weight: 30 kg For sale only to businesses, with exclusion of warranty.

Year of construction: 1985, condition: used, closing pressure 4360 kN table-size 730 x 730 mm control B+R Industrieelektronik draw back pressure 190 kN ajustment speed max. 60 mm/sec return speed max. 90 mm/sec Bedpfx Aljtqqr Ejbown daylight between the columns 900 mm total power requirement 30 kW dimensions of machine L x W x H 3,61 x 2,1 x 3,1 m dimensions of switch cabinet 0,85 x 0,44 x 2,0 m dimensions of hydaulic 1,0 x 0,85 x 2,36 m weight ca. 15 t = vulcanizing press with vertical closing unit, with form removal and form separation device

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 12915769, overall weight: 40 kg, The used unscrewing unit (2 directions, for a 270 C / 370) from Arburg is used to automatically demold plastic parts with internal or external threads from the injection molding tool by precisely unscrewing the thread core during or after the opening process. Bjdpfx Asy Tkh Selbswn Long version Dimensions: 200x350x600 mm Weight: 40 kg

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, Sumitomo DEMAG Systec 120/470-600 NC 5 Year of manufacture: 2008 Bwodpey Tcu Defx Albjn Control system: NC 5 Screw diameter: 45mm Injection volume: 323ccm / 294g Clamping force: 1200KN Tie-bar spacing: 470mm x 470mm Minimum mold height: 150mm Maximum plate spacing: 850mm (900 / 950 with WA) Opening stroke: 800mm Ejector stroke: 180mm The machine is currently undergoing an overhaul and is being tested for functionality.

Condition: used, Year of construction: 2017, machine/vehicle number: 244489, Machine as new. Very little used, only for sample production. Machine is fully equipped: see dokuments Machine houers 22039. Bjdex H Npuepfx Albswn

Condition: ready for operation (used), Year of construction: 2002, operating hours: 14,500 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 60 mm, displacement volume: 735 cm³, injection pressure: 1,481 bar, injection weight: 662 g, mold height (min.): 250 mm, ejector stroke: 250 mm, plate length: 650 mm, plate width: 1,050 mm, installation height: 850 mm, Machine in operational condition. Includes handling robot from ENGEL. Bjdpsyuayrsfx Albjwn

Condition: used, Year of construction: 2005, operating hours: 67,553 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 30 mm, clearance between the columns: 355 mm, displacement volume: 106 cm³, injection weight: 96 g, mold height (min.): 210 mm, opening stroke: 400 mm, plate width: 480 mm, plate height: 480 mm, installation height: 400 mm, heating capacity: 8.3 kW (11.28 HP), power: 11 kW (14.96 HP), Machine DEMAG Ergotech Extra 50-200 with SEPRO Axess S3 handling robot. Ready for production and available for inspection at any time. 2 pneumatic cascades, 1 AS core pull, 6 integrated hot runner zones. Bodpfx Alox Ex R Esbewn

Condition: used, Year of construction: 2000, operating hours: 89,978 h, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 60 mm, displacement volume: 848 cm³, injection weight: 763 g, mold height (min.): 350 mm, opening stroke: 950 mm, plate width: 1,300 mm, plate height: 1,080 mm, installation height: 950 mm, Engel ES 2050/350 HL-V machine immediately available. Machine can be inspected in operation. Includes handling robot. Equipped with 2 DS core pulls, 6 integrated heating zones, and 1 air valve. Bwodox Ex Azjpfx Albjn

Condition: used, Year of construction: 2021, operating hours: 5,048 h, functionality: fully functional, machine/vehicle number: 245467, ENGEL DUO 17060/2000 injection moulding machine with ENGEL Viper 60 robot (robot working area, conveyor belt) – year 2021 For sale: ENGEL DUO 17060/2000 injection moulding machine, year of manufacture 2021, in excellent technical condition. The machine has been regularly serviced and operated in stable production conditions. Technical data and information: - Manufacturer: ENGEL - Model: DUO 17060/2000 - Clamping force: 2000T - Year of manufacture: 2021 - Operating hours: 5048 h - Type: two-platen injection moulding machine - Condition: very good, fully functional Additional equipment: - ENGEL Viper 60 robot – perfectly matched to the machine, ready for direct integration into a production line, robot working area, conveyor belt. Offer advantages: - Low number of operating hours - Modern, energy-efficient design Bwodpfxeycc N Sj Albjn - High process repeatability and precision - Complete package: injection moulding machine + robot, robot working area, conveyor belt Ready for immediate commissioning

Condition: used, Year of construction: 2000, (1) Injection molding machine, handling: Arburg | Multilift H with B-axis | 2000 Temperature control: HB Therm | HB-160 Z1 | 2012 Miscellaneous: 1x Handling System 1x Conveyor Belt (integrated into the injection molding machine) 1x Conveyor Unit, Motan 1x Packaging cell with: Robot, Yaskawa GP-7 Camera system, Omron Conveyor belt, Robotunits Technical Details: Operating voltage: 400 V Frequency (Hz): 50 Control voltage 1: 230 V Bwedpfx Aloy N Sauobsn Control voltage 2: 24 V Motor/Heating rated current (A): 200.0 / 93.0 Total connected load (kW): 42.0

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Sepro Robotique | Success 7 | 2016 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, company RAU Maschinenbau 1x Hot Runner Controller Bwedsy N R U Rjpfx Alben 1x Conveyor Belt, company SAS Grillet 1x Conveyor Unit, company Motan Technical Details: Machine size: 500/370-200 Power supply: 3/N/PE AC 400 V Frequency (Hz): 50 Current (A): 94 Weight (t): 3.3 Pressure (bar): 210 Flow rate (l/min): 130

Condition: used, Year of construction: 2000, (1) Injection Moulding Machine, Handling: Wittmann | WX142-0325 | 2023 Miscellaneous: 1x protective enclosure 1x handling system, Wittmann Series 9 1x conveyor belt incl. box-changing function 1x V2A reject chute 1x Euromap 12/67 conversion 1x external hot runner unit, Mold Masters M1-06-12 (year of manufacture 2016), 12 zones 1x conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 196 Current 2 (A): 110 Bwsdsy N R Uqepfx Alben Current 3 (A): 86 Current 4 (A): 67 Weight (t): 9.7 Pressure (bar): 190 Flow rate (l/min): 190

Condition: used, Year of construction: 2010, (1) Injection molding machine, Handling: Wittmann | W832-0185 | 2010 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure Bedpfxoy N R Tyo Albswn 1x Handling System 1x Conveyor Belt 1x Hopper Dryer, company TORO-systems 1x external Hot Runner Unit, company Mold Masters 1x Conveyor Unit, company Motan