Used Grille Frame Attachment for sale (13,447)

Year of construction: 2022, condition: good (used), Josper Charcoal Oven HJX-45, Josper's medium-sized oven, recommended for approximately 120 guests. The preheating time is around 35 minutes, daily charcoal consumption is 12 to 16 kg, and the capacity per load is 9 hours. Average output per hour is 90 kg and grill temperature ranges from 250 to 350 ºC. Brand: Josper Nkedpfx Adsxtbrxs Not Model: HJX-45

Condition: excellent (used), Moulding frames, moulding boxes approx. 270 pieces very good, immediately ready for use condition lashing on pallets ready for transport Nsdpsd Txz Sofx Ad Nokt

Condition: new, pressure: 125Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 11weight approx.: 8000messurements (LxWxH): 1800 x 1500 x 2600 Nedpfxektm N De Ad Nskt

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Nkjdpfetqwtdox Ad Nst Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Condition: new, Year of construction: 2024, manual hydraulic frame and edge press 1-sided, stationary > strong welded steel frame > frame pressing system with continuous counter pressure beam on the left side > 1 movable slide (machined surface) for horizontal calibration of width, adjustable in 50 mm increments; with bolt for central locking > 2 manual hydraulic cylinders, horizontal adjustable, pressing strength of 20.000 N each and stroke of 60 mm > 5 vertical pressing units on ball bearings in galvanized structural steel with manual hydraulic cylinders, pressing strength of 20.000 N and stroke of 60 mm pressing units adjustable in 50 mm increments; bearings adjustable six fold and with drop out safety lock; bearing and pressure plate: 40 mm long and 80 mm deep > 1 zinc-plated adjustable hold-down bar with screw clamp, manual to be unhinged > painting: grey-white RAL 9002, abutment and pressing plate blue RAL 5010. > also available with more or less vertical pressing units art.no. Q 007 (as listed in accessories and options) working space as frame press (w / h in mm): 2700 x 1800 working space as edge press (w / h in mm): 3000 x 1800 overall dimensions (w / h / d in mm): 3340 x 2350 x 730 Nedpfx Asyuxked Nekt Price additional packaging costs 92,- netto

Condition: new, Year of construction: 2025, functionality: fully functional, 125 T C-Frame Servo Press with 50 T Ejector, DUPLOMATIC Hydraulics Reduced power consumption by up to 40% compared to conventional motors, thanks to servo-hydraulics. TECHNICAL DATA: - Press capacity: 20–125 T (adjustable) - Maximum installation height: 1000 mm Njdpfx Aox Aqtqod Nokt - Usable table surface: 2200 x 750 mm - Usable ram surface: 980 x 750 mm - Ejector cylinder capacity: 50 T - Ejector cylinder stroke: 200 mm - Frame type: C-frame - Guide column diameter: Ø 100 mm (4 pieces, in corners) - Table height from floor: 870 mm - Overall dimensions approx. (W x D x H): 2400 x 2000 x 3300 mm - Approx. total weight: 8,700 kg - Clamping device for die centering: 50 mm diameter - Prepared for vibration dampening plates: 30 mm - Prepared for ROBO connection: yes HYDRAULIC CYLINDER: - Piston stroke: 0–700 mm (adjustable) - Max. operating pressure: 245 bar - Return speed: 300 mm/sec - Ram speed under load up to 25%: 25 mm/sec - Ram speed under load up to 50%: 14 mm/sec - Ram speed under load up to 80%: 7 mm/sec - Ram speed under load up to 100%: 6 mm/sec - Idle speed: 300 mm/sec HYDRAULIC POWER UNIT: - SERVO hydraulic pump (brand: DUPLOMATIC): 143 L/min (1 piece) - SERVO motor power: 15 kW (1 piece) - Pressure accuracy during pressing stroke: +/- 5 bar - Pre-fill valve: NG-160

Condition: used, functionality: fully functional, load capacity: 3,000 kg, empty load weight: 330 kg, Device clamp Njdpfx Aou Dzzpjd Nokt Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this Riman model, we have approx. 200 heavy-duty forklift trucks, compact forklift trucks, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail on this PH100 P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: excellent (used), functionality: fully functional, Description of the device Pump motor power - 1.35 kW 10 hydraulic cylinders for pressure - spring return 17 upper hydraulic cylinders for pressing the beam Nkodpevy Uqfefx Ad Njt Maximum working dimensions 7x1.5m

Condition: used, Single-column hydraulic press SCHÖN type TES/C Year of manufacture 1977 Pressing force 63 tons (160 bar) Thrust 320 mm Table size 600 x 770 mm Ram surface 600 x 400 mm Njdpfx Adov Tp D Ts Nekt Ram stroke 125 mm Max. installation height 400 mm (with intermediate plate on the ram) Rapid downward traverse speed approx. 180 mm/sec. Rapid working speed approx. 25 mm/sec. Rapid upward traverse speed approx. 180 mm/sec. Table height above floor: 870 mm Drive power: 22 kW Power supply: 380 volts, 50 Hz Tank capacity: approx. 280 liters of hydraulic oil - Adjustable fixed stop - Electric two-hand operation - Intermediate plate on the ram: L x W x H 500 x 500 x 50 mm Space requirement: L x W x H 2400 x 1100 x 2750 mm Weight: 4 tons Good condition

Year of construction: 2012, condition: excellent (used), Ruchser roller conveyor for windows with 90° turning device left/right length 4400mm Electrically driven accumulating rollers with 2 parallel system components pneumatically tiltable from vertical 7° outside to vertical 7° inside. Plant parts 1900 mm high with rubber roller strips. Njdpfxjlpcc Ij Ad Nekt Between the rubber strips stainless steel plates 2 mm deeper for sliding surface clip holders. Inlet and outlet with edge protection rollers up to 3000mm high as rubber rollers. Infeed track 2000 mm, outfeed track 4000mm driven accumulation rollers. Control and operating element mounted on freely adjustable stand.

Condition: good (used), Internal item no.: 25087 Cylindrical grinding machine Schaudt AR 500 + Magnetic chuck D160mm + Internal grinding attachment! Grinding length: max. 500mm Grinding diameter: max. 300mm Centre height: 150mm Centre distance: 500mm Tailstock taper: MK4 Nedpfxsxtpbbe Ad Nokt Machine dimensions (LxWxH): 2700 x 2000 x 1800mm Weight: approx. 2000kg

Condition: excellent (used), Frame Guillotine Valiani V110 Double mitre cuts at 45° Nkodpfxjxu Uh As Ad Net Straight mitre cuts up to 90° Max. working width: 100 mm Mechanical feed of cutting unit CE certificate

Condition: new, Year of construction: 2025, Minimum requirements for the forklift: 4 wheels; at least 2 tons lifting capacity; an additional oil channel available; fork length not less than 1200 mm; fork cross-section: maximum width 150 mm, maximum thickness 60 mm; minimum fork spacing: 700 mm. Nedpoxy N Dpjfx Ad Nekt

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Nsdpfxow Dgi Te Ad Nekt Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: good (used), machine/vehicle number: 2824, Year of construction: 2011, total length: 6,000 mm, total width: 2,400 mm, SHT LIFTING FRAME 20" from Uniktruck Nsdpjw Nbpkjfx Ad Nokt

Condition: used, We have a Pitney Bowes stand alone friction feeder complete with fame available. You can adjust and process almost all materials. It comes with the frame. Nksdpfx Aevn Nbusd Net

Condition: used, Year of construction: 1986, - 2 pneumatic printing cylinders in length - 2 pneumatic pressure cylinders in width - 2 pneumatic workpiece hold-downs - feed belt width: approx. 680 mm - feed belt length: approx. 3.400 mm - clamping area: 680 x 1.400 mm - control panel Machine dimensions: - Length: approx. 3,400 mm - width: approx. 1.700 mm - height: approx. 1.400 mm Nkodpfeiim Rnsx Ad Njt - Weight: approx. 800 kg

Condition: good (used), For fully automatic assembly of frame parts. Nkedpfedhdg Iox Ad Not Outer frame dimensions: min. 120 x 120 mm max. 700 x 2.500 mm

Condition: used, Year of construction: 2000, To the fully automatic Assembly of frame parts. Nsdpfxjd H Irfe Ad Nskt Frame dimensions: min. 120 x 120 mm 1050 x 2,500 mm 2 heating Rails

Year of construction: 2021, condition: new, Gastro M Electric grill plates Demonstration unit without original packaging. NEW with warranty. The Gastro M series is robust, powerful, energy-saving, easy to clean and have a modern look. All units are made of stainless steel and can be connected with connecting bars. Gastro M is the indispensable link in the professional kitchen Electric grill plates with smooth grilled surface. Fast heat-up time, built-in grease drip tray, thermostatically controlled zone with built-in on/off switch and pilot light. Easy to clean. Stainless steel housing High quality cast steel plate Integrated fat collection drawer Adjustable thermostat Even heating Suitable for base cabinet AGL913 & base frame AGL911 Nsdpohgwd Tjfx Ad Nokt Specification: Gastro M Model 60/30FTE 300mm wide Power: 3kW/400V Dimension: 600(D) x 300(W) x 280(H)mm Weight: 27kg Accessories on request If you wish a detailed consultation, please contact us All dimensions = approximate Photo similar

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Nodsxw Uf Tjpfx Ad Nskt

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Nksdpfx Ajxw Ubned Njt

Year of construction: 1980, condition: used, passage width 560 mm passage height 560 mm stroke 600 mm Nedpfecvhndex Ad Njkt Speed max. 320 1/ min. The creel is completely mechanized with new Moehringer high speed infeed.

Condition: excellent (used), 113 sets, pallet collars type 65, Cordes, ideal for stacking goods on Euro pallets - second-hand : Price per piece blue pallet collars (net): only 45.-€ Price per piece in galvanized quality (net): only 55.-€ Manufacturer: Cordes Type: Pallet extension type 65 Year of manufacture: unknown With hook connection for pallet dimensions 1200 x 800mm Usable height; 800mm 800mm high 800mm wide Load capacity: 1.500kg Dead weight per set approx. 22kg 4 stacking plates for safe stacking Nksdpfer Imatjx Ad Not collapsible New price: approx. 150.-€ Quantities available: 29 sets in galvanized and 84 sets in blue Condition: very good Available: immediately Location: 74080 Heilbronn

Condition: excellent (used), Year of construction: 2009, CNC for complete processing of door frames / jambs , either or adjustable door frames in DIN norm Working width max 3.000 mm Working width min 480 mm Workpiece thickness max 98 mm Workpiece width max 280 mm Aggregates per side 2 Saw aggregates per side 1 diam. 400 mm Drilling supports per side 1 Drills per side 5 Nksdpfx Adsw Sd Uue Not Aggregates longside 1 Milling aggregate with 2 spindles Aggregate tiltable in angle 45° Angle adjustment - programmable controller Width adjustment - programmable controller Conformity marking - CE mark Weight 2.500 kg