Used Aircenter Sm 12 for sale (66,309)

Condition: excellent (used), Year of construction: 2016, Kaeser Aircenter SM 12 Screw Compressor Manufacturer: Kaeser Model: Aircenter Condition: Used, very good Operating hours: 4,300 h Load hours: 1,300 h Maintenance (oil + all filters) will be renewed before handover. Technical Data Pressure: 11 bar Effective delivery rate: 1.08 m³/min Drive motor rated power: 7.5 kW Drive motor protection class: IP 54 Power supply: 400 V / 3 Ph / 50 Hz Dimensions (W x D x H): 630 x 1200 x 1716 mm Weight: 400 kg Compressed air tank: 270 l Gkjdpfx Afsxlad Rjijc Compressed air connection: G 3/4 Sound pressure level: 64 dB(A) Refrigeration dryer: Power consumption: 0.26 kW Pressure dew point: 3 °C Pressure loss: 0.2 bar Refrigerant: R 134a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment EN 60204-1: Yes Scope of delivery: – Documentation – RFID card – 5m power cable with 32A plug

Condition: like new (used), Year of construction: 2021, operating hours: 620 h, functionality: fully functional, Kaeser Aircenter SM13-11 screw compressor (2021) Manufacturer: Kaeser Type: Aircenter SM13-11 Year of manufacture: 2021 Condition: Very good, used Switch-on hours: 1356h Load hours: 606h Maintenance in 2825h Technical data Pressure 11 bar Effective delivery quantity 1.08 m³/min Nominal power drive motor 7.5 kW Protection class drive motor IP 54 Electrical supply 400 V / 3 Ph / 50 Hz Gsdpfx Ajxnnd Rofijkc Dimensions (WxDxH) 630x1200x1716 mm Weight 400 kg Compressed air tank 270 l Compressed air connection G 3/4 Sound pressure level 64 dB(A) Refrigeration dryer Power consumption 0.26 kW Pressure dew point 3 °C Pressure loss 0.2 bar Refrigerant R 134a Energy saving control Yes Electronic condensate drain Eco-Drain Electrical equipment EN 60204-1 Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m supply cable with 32A plug

Condition: ready for operation (used), Bosch SM 4.7/20-G16 Servo Control Module 1070917161, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Godpsi D Ud Iefx Afiokc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Compressor: Manufacturer Kaeser Model SM 12 Year of manufacture 2016 Power 7.5 kW Operating pressure 8 bar Refrigeration dryer: Manufacturer Kaeser Model ABT 12 Year of manufacture 2016 Refrigerant R-134a Tank: Manufacturer BWB Behälter-Werk Year of manufacture 2016 Max. operating pressure 11 bar Capacity 270 liters After oil and filter inspection (replacement) Technical condition: perfect! Gedpfx Aowx I Rujfiokc

Condition: used, Compact screw compressor system for generating compressed air for workshops or machines, with a tank and condensate separator. Fully automatic, soundproofed, and vibration-isolated, with very few operating hours. Optional: New service (€750.00 plus VAT) Gjdpjtq Nmhefx Afiokc power: 5,5 kW Max. operating pressure: 8 bar

Condition: new, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: 101780.0, Exhibit immediately available: New Kaeser Aircenter SM 13 - 10 bar screw compressor with integrated refrigeration dryer and 270 liters compressed air tank Control Sigma Control 2 Gsdpfx Afjv Ebl Teiskc Year: 2025 Operating hours: 1 hr Pressure: 10 bars Rated power: 7,5 KW Delivery quantity 10 bar: 1.09 m³/min Sound level: 65 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 630 x 1220 x 1720 mm Weight: 440 kg Visit our store. We always have a wide range of new and used compressors in stock!

Condition: excellent (used), Year of construction: 2007, Window fitting press Gjdjt T Srpopfx Afijkc

Condition: new, Rollmak 3-roll round bending machine SM 90-12/3,0 Special equipment included in the price hardened rolls motorized back roll adjustment digital display sheet width 1250 mm sheet thickness 3,0 mm max. sheet thickness 2,5 mm bending roll length 1250 mm roll diameter 90 mm smallest bending diameter 130 mm weight 500 kg dimension L-W-H 1850 x 700 x 1200 mm motor:1,1 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device Gkedslu Enrepfx Afioc asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: ready for operation (used), Bosch SM 20/30 LN - SM 20 / 30 LN servo module, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately Gedov E Tt Nepfx Afiokc

Condition: reconditioned (used), Year of construction: 2021, operating hours: 12,622 h, functionality: fully functional, overall weight: 300 kg, total length: 1,250 mm, total width: 650 mm, total height: 1,750 mm, power: 7.5 kW (10.20 HP), fuel type: electric, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Equipment: refrigerant dryer, type plate available, Kaeser AIRCENTER SM 13 screw compressor 8 bar 7.5 kW Operating hours: 12,622 h Installed refrigeration dryer Kaeser ABT 15 Maintenance carried out with the following items: - Compressor filter set Gkedpfevyr R Aex Afiec - Oil separator cartridge - Fluid Rotary S-46 - Cooling fluid

Condition: new, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: MA0145_1375, Exhibit immediately available: Gjdpfxoh Ey N Ue Afiekc New Kaeser Aircenter SK 16 - 8 bar screw compressor with integrated refrigeration dryer and 270 liters compressed air tank Control Sigma Control 2 Year: 2023 Operating hours: 1 hr Pressure: 8 bars Rated power: 9 KW Delivery quantity 7,5 bar: 1.61 m³/min Sound level: 66 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 630 x 1220 x 1720 mm Weight: 440 kg Visit our store. We always have a wide range of new and used compressors in stock!

Year of construction: 2017, condition: ready for operation (used), Additional Equipment Mold temperature control Automatic activation lamp Automatic last rotating Automatic mold slider closing Measurement & quality control tools This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine. Gkodpfx Afjxgwa Soioc Application Types Injection Moulding

Year of construction: 2020, condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- 37 cm height-47cm length-8cm Gjdpfxjqvuics Afiokc

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 111A030921006, warranty duration: 12 months, frame height: 400 mm, frame width: 500 mm, Equipment: documentation/manual, Mature technology With the SM1 series, which was also marketed under the name AMPAG Sprint, the German manufacturer Schwede Maschinebau GmbH has created a real long-running success that is still in use thousands of times today. Whether in print stores, lettershops or in warehouses and logistics, this all-rounder enjoys great popularity in a wide range of industries thanks to its low-wear and low-maintenance technology. Our model is also equipped with a second foot pedal on the back as well as a table top sensor for automatic triggering of the strapping process. The device from 2009 was already equipped by SMB with the new and easy to understand control panel, which can still be found in the current models. On its four smooth-running heavy-duty rollers and with the 1-phase 230V power connection, this very compact device can easily be put to use at any location in your plant. Fast, thanks to compact design The compact strapping frame covers a wide range of possible applications. Package sizes up to approx. 450mm x 500mm can be strapped with either 5mm or 9mm wide strap. This design makes the device particularly fast, because the strapping band only has to cover a short distance through the strapping frame. Strapping every second is therefore no problem. As good as new due to CUPASO major overhaul With our completely overhauled used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the AMPAG Sprint offered here. In terms of handling, availability and efficiency, it does not need to hide behind current models. And with our extensive major overhaul, we have simply turned back the clock for this device by around 14 years and offer you a technically and visually almost new device at less than half the price of a comparable new one. This is what we promise Our guarantee promise of a full 12 months naturally also applies to our SMB AMPAG Sprint. So you are on the safe side. If something should break during this time, we will replace the defective component and install it at our expense (excluding wear and tear and travel). - Frame size: 500 x 400 mm - Year of manufacture: 2009 - Machine number: 111A030921006 - Condition: Overhauled Gsdpfx Ajn I Up Rsfiekc - Equipment: - Foot pedal on both sides - Triggering with table top sensor - Special features: Extensively overhauled and full warranty for 12 months

Condition: good (used), Krauss-Maffei SPA 12/25 RP  Gkjdpfxohvml Dj Afioc Manufacturer: Krauss-Maffei  Type: SPA 12/25 RP Type: Hydraulic power unit  Complete factory closing, wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: 6215.101.00001B, pressing force: 12 t, Our HSM 12 Gigant is in its element wherever bulky cardboard, plastic films, or other materials need to be compacted. Thanks to the extremely large loading opening, the device can be filled simply and conveniently. The result is compact bales that are easy to transport. And if the press is urgently needed in another area of the company – not a problem: Thanks to its 4 wheels, it can be used anywhere and at any time. Gsdpfxow Az E Te Afiekc

Condition: used, Year of construction: 2002, lifting height: 5,000 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Scania, fork length: 2,400 mm, Weights Empty weight: 16.100 kg Functional Lifting capacity: 12.000 kg Maximum passing height: 395 cm Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Front tyre size: 315 / 80 R22,5 Fork carriage: Positioner and spread Gkjdpfx Afewxd R Rsioc Additional information Please contact Bas Sindorf for more information

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 410B010616003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 410B010616003 Year of manufacture: 2006 Strapping: 5-9 mm, coil core 200 mm, width 190 mm Transport speed: 0.8 m/sec. - Transport height: 850 mm (30 packages/min. with single strapping, 15 packages/min. with parallel strapping) 12-month warranty (excluding: machine control, travelling expenses and wear and tear) Properties / Features: ⦁ Suction ⦁ Reinforced exhaust, with bundle height detection via bundle press (bundle height below 10 mm to min. approx. 3 mm - depends on product) ⦁ Strap scanning ⦁ Strap ejector ⦁ Strap infeed, automatic ⦁ Strap cutting blade ⦁ Command buttons, additionally opposite operating unit (START/STOP/NOT-OFF) ⦁ Blow gun with spiral hose ⦁ Bundle height-dependent automatic belt tensioning system ⦁ Inlet and outlet timing with complete plug connection, 16-pin (Walther) ⦁ Height adjustment of the feet ⦁ Light barrier attachment at the top ⦁ Mains cable, length 3 m ⦁ Package scanning ⦁ Parcel stops, move away from the parcel when opened ⦁ Parcel press gentle (with laser) ⦁ Plexi protective doors on the side, firmly screwed in place ⦁ Press beam, double ⦁ PLC control with jog dial control panel ⦁ Coil quick-change device Gkedowcq E Ajpfx Afijc ⦁ Cycle-stop interlinking ⦁ Table belt drive, infinitely variable (frequency converter) ⦁Electrics: Connection voltage 1 phase with neutral conductor or 2 phases at 198V, 208V, 218V, 220V - 240V, 390V - 410V, 450V - 500V 50 Hz or 60 Hz - Here set to 400 V - 50 Hz -

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 223A011235001, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235001 Condition: Refurbished Our latest project was the refurbishment of this fully automatic strapping machine SMB CUBE 600x600c from 2012. You might be able to see from the outside and from the price that this CUBE is a second-hand machine, but when you look at the list of spare parts and labour hours used, it becomes clear: this machine has been extensively refurbished to its original condition and is now as good as new; perhaps even a little better. As good as new with the CUPASO refurbishment With our reconditioned used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the SMB CUBE 600x600c offered here. We also offer you our comprehensive service for this refurbished device. In addition to our 12-month guarantee, this includes the long-term supply of consumables, spare parts and technical service. Prepared for integration into automated packaging lines Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. This is what we promise Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). And if you decide quickly, you will receive our exclusive pre-sale discount of 10%. Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Simplest handling • Minimal space requirement Gksdpfx Ajt Uzv Tjfiec • Best cost/benefit ratio • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package • External button: Do not strap package • Package height-dependent belt tension (laser sensor) • Pneumatic package press (600x600) • Double press bar 600 • Draw-in protection on table top, infeed side

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 410B010616004, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 410B010616004 Year of manufacture: 2006 Godowd I Idopfx Afiekc Strapping: 5-9 mm, coil core 200 mm, width 190 mm Transport speed: 0.8 m/sec. - Transport height: 850 mm (30 packages/min. with single strapping, 15 packages/min. with parallel strapping) 12-month warranty (excluding: machine control, travelling expenses and wear and tear) Properties / Features: ⦁ Suction ⦁ Reinforced exhaust, with bundle height detection via bundle press (bundle height below 10 mm to min. approx. 3 mm - depends on product) ⦁ Strap scanning ⦁ Strap ejector ⦁ Strap infeed, automatic ⦁ Strap cutting blade ⦁ Command buttons, additionally opposite operating unit (START/STOP/NOT-OFF) ⦁ Blow gun with spiral hose ⦁ Bundle height-dependent automatic belt tensioning system ⦁ Inlet and outlet timing with complete plug connection, 16-pin (Walther) ⦁ Height adjustment of the feet ⦁ Light barrier attachment at the top ⦁ Mains cable, length 3 m ⦁ Package scanning ⦁ Parcel stops, move away from the parcel when opened ⦁ Parcel press gentle (with laser) ⦁ Plexi protective doors on the side, firmly screwed in place ⦁ Press beam, double ⦁ PLC control with jog dial control panel ⦁ Coil quick-change device ⦁ Cycle-stop interlinking ⦁ Table belt drive, infinitely variable (frequency converter) ⦁Electrics: Connection voltage 1 phase with neutral conductor or 2 phases at 198V, 208V, 218V, 220V - 240V, 390V - 410V, 450V - 500V 50 Hz or 60 Hz - Here set to 400 V - 50 Hz -

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 223A011643003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-12 mm Year: 2016 Machine-No.: 223A011643003 Condition: Refurbished Features: ⦁ ASLF Anti-Strap-Loss-Function Permanent strap control ⦁ Automatic strap feed ⦁ Strap width 5 - 12 mm, optional ⦁ DAT Direct-Access-Technology Torque-controlled retraction force, adjustable ⦁ Adjustable transport speed ⦁ Machine mobile ⦁ Table height continuously adjustable ⦁ Package flow monitoring Special features: • Right machine (viewed in the direction of conveyance) • EMERGENCY STOP button in the Easy Control control unit • Signal exchange: 2 x mating connector with tool • Additional light barrier for attachment to the front or rear conveyor • Signal exchange: Do not strap the package. To the front-running machine • External button: Do not strap the package • Strap tension dependent on the package height (laser sensor) • Pneumatic package press (600x600) Gsdpfx Afoukvgreijkc • Double press beam 600 • Feed protection on the table top, inlet side

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 112A011713008, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 112A011713008 Year of construction: 2017 for parcels max. 600 mm width x 600 mm height 12-month guarantee (excluding: machine control, travel costs and wear and tear) Properties / features: - ASLF anti-strap loss function permanent strap control - Automatic tape feed - Strap width 5 - 12 mm, optional - Operator terminal with soft tension button - DAT Direct-Access-Technology - Torque-controlled retensioning force, adjustable - Single item strapping - Foot switch on the operator side - Mobile machine - Table height infinitely adjustable - Table top hinged at the front and removable at the rear - Machine colour: Frame RAL 7004 / Frame RAL 7016 - Internal strapping coil - Mains connection at the top - Strapping tape 5x0.47mm, white, 7000 m/coil, polypropylene DIN EN 13 394 Godjwclgnopfx Afiokc The machines are delivered with this strap, the remaining strap is included. - Table top front 600, hinged - Rear table top 600, screwed

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 700 mm, Zeiss Prismo 7 MPS VAST Gold with rotary table Year of manufacture: 1999 Retrofit: 2019 Gkjdpfx Asw Az Sysfiec Last calibration: 06/2021 Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm Control: C98 with operating panel Measuring head: VAST Gold 7-position probe changer magazine Probe changing plate Probe accessories Calibration sphere Technical documentation Additional accessories Workstation with monitor Software: Calypso Basic Further options available upon request

Condition: used, machine/vehicle number: 005951, Max. panel width: 1200 mm Max. panel stack height from the ground: 1600 mm Gsdpfx Ajwcybtsfiokc Lifting capacity: 100 Kg Movement system: suction cups.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 700 mm, Zeiss Prismo VAST XT Year of manufacture: 2003 Retrofit Measuring range: X=900 mm, Y=1200 mm, Z=700 mm C99 control unit with operator panel VAST XT probe head 13-position probe changer magazine Probe change tray Probe accessories Gkodpfx Afowyukdsijc Calibration sphere Technical documentation Additional accessories HP workstation with monitor Calypso Basic software, latest version Further options available upon request Available at short notice Delivery without the automatic feed system shown