Used Grease Gun for sale (1,697)

Condition: excellent (used), Year of construction: 2017, Stock no.: 503657 Machine type/ Device type: Hot Runner Control Unit Manufacturer: Günther Model: DPT 5 Year of manufacture: 2017 Electrical Data: Connection voltage: per phase 200-250V AC, 50 to 60Hz, typically star connection Star connection: Ncodpfx Ahjxx Tmrevep 3-phase network with neutral, 200-250V between L and N Delta connection: 3-phase network without neutral, 200-250V between two phases Load connection: IOA per channel (fuse 10A ultra-rapid = FF 10A) and 1 channel per phase with 16A (see maximum load per phase!). Phase load (5 channels per phase): maximum 25A Protection rating: IP 20 Dimensions: (W, H, D) 468mm x 142mm x 345mm Weight: 13.0 kg Enclosure color: grey / blue (RAL 9018 / RAL 5015)

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Ncedpfx Ajxx Ti Tjhvsp Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) LOAD TYPE Resistive loads only permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Power-failure resistant, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Condition: new, functionality: fully functional, mileage: 1 km, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 2,800 kg, empty load weight: 2,800 kg, operation weight: 2,800 kg, maximum load weight: 1,400 kg, lifting power: 700 kg/m, lifting height: 2,050 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, emission class: euro5, Year of construction: 2025, operating hours: 1 h, Equipment: cabin, GG700K Technical Specifications Engine Model: Kubota V2403 Net Power: 50 hp / 2500 rpm Ncjdpfx Ahexuwvcovep Engine Type: Inline 4-cylinder, water-cooled, 4-stroke diesel engine Rated Operating Capacity: 700 kg Rated Load Limit: 1,400 kg Operating Weight: 2,800 kg Bucket Capacity: 0.4–0.5 m³ Maximum Travel Speed: 12 km/h Hydraulic Pump Flow: 75 L/min Fuel Tank Capacity: 70 liters Dump Angle: 30° Dump Height: 2,380 mm Rollback Angle to Ground: 26° Lowering Angle: 20° Length: 3,350 mm Width: 1,720 mm Height: 2,050 mm Height at Maximum Reach: 3,980 mm Height to Bucket Hinge Pin: 3,080 mm Width with Bucket: 1,730 mm Track Width: 1,450 mm Wheelbase: 991 mm Ground Clearance: 180 mm Compact Loader GG700K Skid Steer Loader The GG700K is an advanced skid steer loader delivering high power, reliability, and exceptional performance in demanding work environments. Equipped with modern technology, it is perfectly suited for construction, agriculture, and tasks requiring both mobility and strength. Engine and Drive Powered by a Kubota V2403, a water-cooled, inline four-cylinder diesel engine delivering 50 hp at 2,500 rpm. This engine ensures fuel efficiency, durability, and reliable operation under heavy-duty conditions. Hydraulic System and Performance The hydraulic system provides a pump output of 75 l/min and supports a bucket capacity of 0.4 to 0.5 m³. It features a 30° dump angle, a dump height up to 2,380 mm, a 26° rollback angle to the ground, and a 20° lowering angle, ensuring stability and efficiency on rough terrain. Weight and Load Capacity With an operating weight of 2,800 kg, the GG700K can handle rated loads of 700 kg and up to 1,400 kg maximum load limit. This makes the GG700K ideal for medium-duty lifting and material transport. Speed and Maneuverability The machine reaches a maximum travel speed of 12 km/h, combining compact dimensions with excellent maneuverability for efficient operation in confined spaces and challenging conditions.

Condition: new, Year of construction: 2023, Automate your cleaning process with Superior Series equipment: lifting device with support grid for easy handling of parts, filter systems for dirt separation, exclusive oil separation system (OPS) and intuitive touch panel. Standard models available from 150 L to 7,500 L Tank capacity: 390L Außenmasse:1680x1130x1720mm Useful dimensions grate:870x520x385mm Loading weight: 250kg Njdpfof E Ntvox Ahvocp Ultrasonic frequency: 28/40kHz Ultrasonic power:2400W

Condition: used, One simple combi sorting line with 10 band pockets and a capacity of up to 40 pieces per minute. Njdpfxsxyaivo Ahvocp

Condition: refurbished (used), LAGUN 19 Manual/conventional/universal fixed bed milling machine Table dimensions: 2,115 x 700 mm X-axis travel: 1,900 mm Y-axis travel: 950 mm Z-axis travel: 1,000 mm Electronic handwheel Fagor digital readout BT50 tool holder Hydraulic tool clamping Spindle speed: 28 – 1,800 rpm Feed: 0.25 – 88.60 Automatic guideway lubrication Coolant pump and tank Spindle motor power: 15 kW Weight: 8,000 kg Dimensions: 3,600 x 2,700 x 2,650 mm Nodpfxexxkwus Ahvscp

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H103-000-000, conveyor belt width: 1,600 mm, conveyor belt speed: 1,700 mm/s, total width: 1,854 mm, power: 2.2 kW (2.99 HP), axle spacing: 4,450 mm, construction width: 1,854 mm, Center distance: 4,450 mm Belt width: 1,600 mm Overall width: 1,854 mm Cheek height: 240 mm Conveyor speed: 1.0 m/s Belt quality: EP 400/3 4:2.0 mm normal quality Profiling: Steep conveyor belt, PB 1290 mm / PH 17 mm Nodpfx Ahju T Ewwovjcp Drive: Van der Graaf drum motor Power: 2.2 kW Motor protection class/efficiency class IP 66 / ISO F Drive drum: Ø 160 mm (drum motor) Rubber coating: Metallic surface Deflection drum: Ø 175 mm, spherically turned Bearing: Maintenance-free radial insert ball bearing Ø 50 mm Idlers: Ø 63.5 mm Idler spacing: 500 mm Idler bearing: Maintenance-free Return rollers: Ø 63.5 mm Side guide rollers: 2 pieces Ø 120 mm with grooved ball bearings Tensioning station: M16 threaded spindle

Condition: used, hot runner control device Günther DPT 10 10x fach 230 Volt Ncedpfx Ahoh Uucfovep price: 1.850 Euro contact: Mr. Rainer Eckerle

Condition: used, Tumbler with cooling system Manufacturer: Gunther Model: GPA 300K Made of stainless steel Volume: 300 liters Capacity: 200kg Dimensions: 1950x1000x2100mm Ncsdpfx Astrgunehvep Electric power: 2.5kW

Condition: used, Injector Gunther Type: PI 26 Number of needles: 26 Needle diameter: 4 mm Max. product width: 340 mm Cycles per minute: 15 to 55 cycles/min Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0.5 to 4.0 bar Electric power: 3 kW Voltage: 400 V Current: 16 A Machine dimensions (cm): Nodpfx Ahjw Ra Rpjvocp Width: 70 Length: 170 Height: 200

Condition: used, Injector Manufacturer: Gunther Model: PI 52 Number of needles: 52 Needle diameter: 4 mm Nsdjui Iylepfx Ahvjcp Tact per minute: 15 to 55 tact/min. Product passage height: 220 mm

Condition: used, Type: PI 54 Number of needles: 54 Needle diameter: 4 mm Max product: width 340 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 8kW Machine dimension in cm: Width: 85 Length: 200 Height: 230 Nodpfx Ahek R Tqcsvjcp Delivery time: 30 working days after advanced payment

Year of construction: 2013, condition: good (used), Crossover / Platform / Staircase, Günzburger – used – Ex-works price: only €1,795 (net), dismantled, packed and loaded! Nsdpfxjwxv Eys Ahvocp Manufacturer: Günzburger Steigtechnik GmbH Type: unknown Year of manufacture: 2013 Permissible load: 200 kg Platform / crossover height: approx. 1.25 m Platform dimensions: approx. L: 80 cm, W: 80 cm step width Total width: approx. 86 cm Steps: width approx. 80 cm Railing height: approx. 1.12 m Total height (with railing): approx. 2.35 m 2 x 6 steps Railing on both sides Original price: over €3,000 (net) Condition: good Available: immediately Location: Frankenberg warehouse

Condition: new, Year of construction: 2025, Technical Parameters Model: RST-FLC-2000W/3000W Laser: Raycus fiber laser Laser power: 2000W / 3000W Laser wavelength: 1064nm Frequency: 10–50 kHz Cooling method: Water cooling Cooling water: Deionized water Water temperature: 23–26°C Net weight: 160kg (2000W) / 200kg (3000W) Dimensions: 98 × 122 × 143 cm Total power: 2000W / 3000W Scan width: 10–80 mm Ncodpfewznqgsx Ahvep Mode of operation: Handheld or automatic Operating temperature: 0–40°C Price Fiber Laser Cleaning Machine RST-FLC-2000W/3000W Connection: 230V / 380–400V – 3PH 50Hz RAYCUS 2000W (230V)……….€12,500 RAYCUS 3000W (380V)……….€15,500

Condition: used, Year of construction: 2023, No. 10017 Two-fraction star screen GÜNTHER MULTISTAR ONE / MS ONE Used, year of construction 2023 Approx. 200 operating hours Mobile star screen for screening waste wood, biomass, green waste and other screenable materials in 2-fractions as well as for overlength recycling - Input material: specific weight 200 - 650 kg/m³ / moisture max. 55% / piece size and individual weight max. 1000 mm and 20 kg / material feed with conveyor belt or wheel loader / throughput capacity up to 200 m³/h - Control, operation, switch cabinet: Type PLC / Operation display, control panel / Manual or automatic operating mode / Power supply AC 400 V, 3P, 50Hz via 32A plug on site - System interlinking: 16-pin plug connection / Cable (15 m) incl. winding device on base frame / Screen deck overrun for EMERGENCY STOP / Dummy plug in control cabinet door - Hydraulic support legs: 4 hydraulic support legs / Increase the discharge height of the useful fraction by 450 mm / All support legs can be controlled individually - Feed hopper: Capacity approx. 2.5 m³ / Feed height 2500 - 3000 mm / Free throw-in length 2300 mm / Conveying medium scraper chain conveyor with maintenance-free flat link chain / Drive 2.2 kW adjustable via frequency inverter - Collecting belt: Center distance 4600 mm / Belt width 1000 mm / Belt type smooth / motor 2.2 kW, v=1.2 m/s - Connect: Connect! is the innovative telematics solution from Komptech / overview of operating status, error messages, statistics, GPS localization, capacity utilization - Petrol-powered hydraulic pump - HyDrive System 2.0 MS ONE - Screen deck 60/90: Output: 0-60/90 and > 60/90 mm / Length 4500 mm / Width 1450 mm / Screen area 6.5 m² / Position 11° incline / Star shafts 17 pieces / Star diameter 340 mm / Star width 55 mm / Center distance 266.5 mm / Cleanstar cleaning elements / motor 2 x 4 kW / Adjustable via frequency inverter - Drive motors 50 Hz: motors for driving the screen deck / 2x 4 kW 50 Hz - Dosing roller: width 1560 mm / diameter 215 mm / drive 3 kW drum motor - FKAB with magnetic drum: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined / Belt type profiled, 15 mm chevron / 3.0 kW motor, v=2.2 m/s / Usable discharge height 3500 mm - 3950 mm / Multi-pole magnetic drum in permanent version / incl. discharge chute - Over-grain discharge conveyor: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined, 220° pivoting / Belt type profiled, 15 mm chevron / motor 3.0 kW, v=2.2 m/s / Usable discharge height 3600 mm - 4050 mm Transport dimensions approx. 8176 x 2466 x 2600 mm LWH Weight approx. 9200 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Nsdswhy T Tjpfx Ahvecp Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: new, Year of construction: 2024, Günter Grossmann GG1000 kubota Dankzij een nauwe samenwerken tussen Günter Grossmann en Kubota is de nieuwe GG1000 graafmachine onststaan. Model GG1000 is een geweldige machine voor de meest veeleisende bouw-, elektrisch en hydraulische bedrijven. We garanderen service na de garantie. De graafmachine wordt vervaardigd op basis van solide Europese technologie Standaarduitrusting is een 38 cm brede graafbak. Extra accessoires voor de machine kunnen aangekocht worden. transport kosten uitsluiten op aanvraag leas besprekbaar PECIFICATIES Model: GG1000 Merk: Günter Grossmann Gewicht: 1000kg Capaciteit graafbak: 0.025 m³ Afmetingen graafbak: 2000mm, 380mm, 500mm Motor: Japan – KUBOTA Motor vermogen: 11.8 kw/2300r/min Hoofd pomp: Wanye Hydraulic Zwenkmotor: Dali Rijmotor: Dali Rijsnelheid: 1,5km/h AFMETINGEN Afmetingen (LxBxH): 2770x896x1490 mm Wielbasis: 770mm Lengte rupsen: 960mm WERKBEREIK Max. graaf diepte: 1650 mm Max. graaf hoogte: 2610 mm Max. dump hoogte: 1850 mm Max. graaf radius op de grond: 2890 mm Rotatie radius: 360° Max. Upgrade height of bulldozer blade: 345 mm Max. graaf diepte graafbak: 255 mm Njdpjgi Rxkjfx Ahvocp evt Bij te bestellen ACCESSOIRES Grondboor Grijper Graaftand Hark Smalle bak 200 mm Smalle bak 380 mm Niveleerbak 500mm Niveleerbak 800mm SnelkoppGünter Grossmann GG1000 kubota Dankzij een nauwe samenwerken tussen Günter Grossmann en Kubota is de nieuwe GG1000 graafmachine onststaan. Model GG1000 is een geweldige machine voor de meest veeleisende bouw-, elektrisch en hydraulische bedrijven. We garanderen service na de garantie. De graafmachine wordt vervaardigd op basis van solide Europese technologie Standaarduitrusting is een 38 cm brede graafbak. Extra accessoires voor de machine kunnen aangekocht worden. transport kosten uitsluiten op aanvraag PECIFICATIES Model: GG1000 Merk: Günter Grossmann Gewicht: 1000kg Capaciteit graafbak: 0.025 m³ Afmetingen graafbak: 2000mm, 380mm, 500mm Motor: Japan – KUBOTA Motor vermogen: 11.8 kw/2300r/min Hoofd pomp: Wanye Hydraulic Zwenkmotor: Dali Rijmotor: Dali Rijsnelheid: 1,5km/h AFMETINGEN Afmetingen (LxBxH): 2770x896x1490 mm Wielbasis: 770mm Lengte rupsen: 960mm Bonwqxjysh WERKBEREIK Max. graaf diepte: 1650 mm Max. graaf hoogte: 2610 mm Max. dump hoogte: 1850 mm Max. graaf radius op de grond: 2890 mm Rotatie radius: 360° Max. Upgrade height of bulldozer blade: 345 mm Max. graaf diepte graafbak: 255 mm evt Bij te bestellen ACCESSOIRES Grondboor Grijper Graaftand Hark Smalle bak 200 mm Smalle bak 380 mm Niveleerbak 500mm Niveleerbak 800mm Snelkoppeling Breekhamer

Condition: used, Year of construction: 1989, x-travel 3000 mm y-travel 940 mm z-travel 1000 mm table surface area 3250 x 800 mm spindle taper SK 50 spindle turning speed range 40 - 1800 U/min Ncjdeuym Tcopfx Ahvop feeds longditudinal/cross/vertical 0 - 2250 mm/min rapid traverse 6 m/min table load 4500 kg control HEIDENHAIN, TNC 355 total power requirement kW weight of the machine ca. 10,3 t dimensions of machine L x W x H 4,50 x 2,69 x 2,71 m Accessories: vertical head swivelling in 2 planes with hydr. tool clamping, coolant

Condition: excellent (used), Evaporator Guntner -Type: S-GHN 081B/37 -Cooling capacity: 82.3 kW at DT8, 63.7 kW at DT7 Ncedpfxewhunxs Ahvjp -Fin spinning: 7 mm -Fans: 3 x 810 mm -Dimensions: 5450 x 1000 x 1300 mm -Refrigerant: Freon -Volume: 112 L -Weight: 619 kg -Quantity in stock: 1 -Reference number: CH 548 -Condition: Used in good condition

Condition: excellent (used), Evaporator Guntner -Type: S-GHN 066D/37 -Cooling capacity: 60 kW at DT8, 50 kW at DT7 -Fin spinning: 7 mm -Fans: 3 x 660 mm -Dimensions: 4280 x 1250 x 960 mm -Refrigerant: Freon -Volume: 99 L -Quantity in stock: 3 -Reference number: CH 547 -Condition: Used in good condition Nsdpswhuppefx Ahvocp

Condition: used, Condenser Guntner -Type: GVH 066C/3L -Cooling capacity: 120 kW -Number of fans: 3 x 630 mm -RPM: 540 / 330 -Dimensions: 4350 x 1100 x 1550 mm -Entry/exit diameter: 22 / 32 mm -Quantity in stock: 2 -Stock number: SK 158 -Condition: Used Ncjdpjwy U Nasfx Ahvop

Condition: used, Used Complet Bitzer Co2 Cooling installation for processing rooms and or corridors This unit, in excellent condition, is equipped with the following main components: 1. Compressors Rack Teko ROXSTA 2.O, with 4x Co2 Compressors Bitzer 4DTC-25K-40P, and 1x Co2 Compressor 4FTE-20K-40S, and original control cabinet - Compressors Type: 4DTC-25K-40P (x4), 4FTE-20K-40S (x1) - Volume: 21.2 m3/h (x4), 17.5 m3/h (x1) - Cooling capacity for CO2: 264.5 kW at -5°C/30°C, 222.6 kW at -10°C/30°C, 153.5 kW at -20°C/30°C - Dimensions of the compressors rack: 3300 x 950 x 2200 mm - Control cabinet dimensions: 1350 x 950 x 2000 mm - Year of production : 2018 2. Evaporators - 5 pieces Guntner S-DHN 051C/24 dual discharge, full steinless steel ( Housing and block made of stainless steel ) - Type: S-DHN 051C/24- - Cooling capacity: 18.9 kW at DT8, 15.3 kW at DT7 - Surface: 101.9 m2 - Air flow: 11 240 m3/h - Fin spinning: 4 mm - Fans: 2 x 510 mm - Dimensions: 2550 x 1560 x 480 mm - Housing and block made of stainless steel - Year of production: 2019 - Volume: 25.7 L - Weight: 149 kg - Quantity : 5 pieces - Year of production : 2019 3. Evaporators - 3 pieces Guntner S-CXDHN 046C/37 dual discharge, full steinless steel ( Housing and block made of stainless steel ) - Type: S-CXDHN 046C/37 - Cooling capacity: 21.9 kW przy DT8, 17.7 kW przy DT7 - Fin spinning: 7 mm - Fans: 3 x 460 mm - Dimensions: 2950 x 1560 x 480 mm - Housing and block made of stainless steel - Year of production: 2021 - Volume: 29.9 L - Quantity: 3 pieces - Year of production : 2021 4. Evaporators - 1 pieces Guntner S-CXDHN 046C/37 dual discharge, - Type: GADC CX 035.1/41M/HEC7E.TNNN - Fin spinning: 7 mm - Fans: 4 x 350 mm - Dimensions: 3150 x 1000 x 300 mm - Electric defrost - Year of production: 2024 - Volume: 14.2 L - Quantity : 1 piece - Year of production : 2024 5. Evaporators - 4 pieces Guntner GACC CX 040.1/3-70.E-1845718M, standart cubic evaporators - Type: GACC CX 040.1/3-70.E-1845718M - Cooling capacity: 17.8 kW at DT8, 14.4 kW at DT7 - Surface: 63.3 m2 - Air flow: 8 640 m3/h - Fin spinning: 7 mm - Fans: 3 x 400 mm - Dimensions: 2370 x 550 x 580 mm - Electric defrost - Year of production: 2019 - Volume: 11.1 L - Weight: 114 kg - Quantity : 4 pieces - Year of production : 2019 6. Gascooler Guntner GVD080.4C/2x3-EK.E, V-shape Njdpoxpvtcefx Ahvocp - Type : GVD080.4C/2x3-EK.E - Year of construction : 2018 - Volume : 60,2 ltr - Fans: 6x 800 mm, 490 RPM, with inverter - Dimensions: 4500 x 2320 x 2850 mm

Condition: ready for operation (used), Cooler Guntner Type: S-GGN 066C/27 Cooling capacity: 40 kW at DT8 Fin spinning: 7 mm Place for electric heaters Fans: 2 x 660 mm Rpm: 870/650 Dimensions: 3050 x 700 x 1100 mm Refrigerant: Glycol Volume: 54.8 L Weight: 275 kg Pieces in stock: 4 Reference number: CH259 Condition: Used Njdjhz T Igjpfx Ahvscp We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: used, Condenser Guntner Ncsdpew Dqknefx Ahvep -Type: GVH 082B/3N(D) -Cooling capacity: 227 kW -Number of fans: 3 x 820 mm -Dimensions: 5300 x 1200 x 19500 mm -Quantity in stock: 1 -Stock number: SK 165 -Condition: Used in good condition

Condition: used, Condenser Guntner -Type: GVH 082B/2x4 ND -Cooling capacity: 620/490 kW -Number of fans: 8 x 800 mm -RPM: 900/700 -Dimensions: 6980 x 2380 x 1880 mm Nedoxg Na Dspfx Ahvjcp -Quantity in stock: 1 -Stock number: SK 168 -Condition: Used in very good condition

Condition: ready for operation (used), Guntner Condenser Type: GVH 090.2A/2x5-N(D) Cooling capacity: 1057.2 / 920.7 kW Airflow: 279,000/229,000 m3/h Ncsdpfx Ahoqi Ekwevjp Number of fans: 10 x 900 mm Unit dimensions: 10200 x 2300 x 1450 mm RPM: 890/700 Capacity: 323.8 L Weight: 2,282 kg Stock: 2 pieces Stock number: SK 108 Condition: Used, good