Used Grease Gun for sale (1,939)

Condition: excellent (used), Year of construction: 2018, working width: 1,200 mm, total length: 12,500 mm, 1 point 2 points boxes 3 points boxes Cardboard from 210-800 gsm Corrugate A/B/E Crash lock 300 meter per minute Max width open box 120cm Min width open box 5cm alignment unit unit for 1-3th creasing Crash lock Gluing unit KAS C1000 3 Guns Fgsdpetq E U Ssfx Akysh unit 2end and 4th creasing Remote control Lenght 12.5 m 12KW

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, input voltage: 400 V, overall weight: 168 kg, temperature: 155 °C, Kärcher HDS 10/20-4MX Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A built-in high-pressure hose reel makes winding and storage easy. A durable brass pump head with new ceramic pistons and seals ensures long, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With operating parameters of 200 bar and 1000 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Model: HDS 10/20-4MX Supply voltage: 400 V ~ 3-phase Flow rate (l/h): 500 – 1000 Operating pressure (bar): 30 – 200 Fgedpfx Ajz Nguiekyjh Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Detergent tank capacity (l): 20 + 10 High-pressure hose length (m): 20 Weight (kg): 168 Dimensions (L x W x H mm): 1330 x 750 x 1060 EQUIPMENT: Built-in hose reel NEW heavy-duty high-pressure gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 20m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in detergent tanks allow for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other lines. The exhaust gas temperature sensor shuts down the engine if the temperature exceeds 300°C. When the eco!efficiency function is activated, the unit heats the water to 60°C, enabling effective cleaning—even of heavy soiling—while reducing fuel consumption by approximately 20%.

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding System, 8 kVA Universal welding station, 8 kVA, manually operated welding gun, dual program. Simultaneous connection of two tools with automatic selection of the corresponding welding program, which saves time and avoids errors, ensuring a simple and safe workflow. Body repairs: Resistance spot welding of sheet metal, smoothing with a dent puller (pins and washers), localized heating (carbon electrode), screw and rivet welding, dent removal from stainless steel sheet metal. Fsdpfx Akjl Smn Ssyjgh Synchronous SCR welding control, adjustment of welding time in cycles and pulses, adjustment of welding current and compensation function. Mains connection: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50% duty cycle: 8 kVA Max. welding power: 35 kVA Max. secondary current: 6.4 kA Heat current 100%: 0.88 kA Year of manufacture: 2014 Weight: 85 kg More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), Bohner Griddle Plate Tabletop Unit BGM 80 A Multi-Grill 8 kW Multifunctional for frying, cooking, and reheating food The multi-grill is equipped with a special grill surface that enables the preparation of all kinds of dishes directly on the grill plate, such as fish, meat, vegetables, rice and pasta dishes, as well as potato dishes and desserts. Fedpoxuqnrofx Akysgh Due to its larger capacity, it is also ideally suited for dishes with sauce, such as goulash. Dimensions: W x D x H 800 x 600 x 200 mm Equipment: 2 heating zones Dimensions of the grill surface: W x D 740 x 540 mm Connection value: 400 V / 8.0 kW Fuse rating: 16 Amps Weight: 40 kg Housing made entirely of stainless steel Housing height: 170 mm Device feet: 30 mm high, adjustable up to a maximum of 75 mm Steel plate, specially hardened Hard chrome-plated Energy-saving technology Heating can be continuously adjusted via a thermostat Optimal thermal conductivity Large, full-surface heat storage Warm-keeping zone on the operator side, 120 mm wide Grease drain/residue collection: centered on the operator side, 130 x 30 mm More items - new and used - can be found in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 2,940 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 950 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 18,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 36, number of axes: 3, This 3-axis AXA VHC-3-3000-M/E was manufactured in 2002. It features an impressive X-axis travel of 2940 mm, Y-axis travel of 900 mm, and Z-axis travel of 950 mm. The machine includes a robust table size of 4350 x 900 mm and a spindle speed range of 40 - 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the AXA VHC-3-3000-M/E vertical machining centre we have for sale. Contact us for further details. Table Clamping Surface: 4350 x 900 mm (with 7 T-slots 18H7 RTA integrated)Swivel Head: Stepless positioning swivel headNC Rotary Table: Type RTA 4 L - 800Spindle Speed Range: 40 - 12,000 rpmSpindle Taper / Tool Holder: SK 40 DIN 69871-A (Hohlwellenmotor, water-cooled)Spindle Note: Spindle replaced/renewed a few years ago for nearly €30,000Tool Changer: 36 positions, movable in Y-directionConnected Load: 69 kVAVoltage: 3x400V/230V/N/PE, 50 HzControl Voltage: 24 V DCFuse Protection: max. 125 AAdditional Equipment:External band filter coolant system Type SA 25/600 (30 bar, 400 Liters)Slat conveyor chip conveyor Type FSB 300 (discharge height 1200 mm, left side)Minimum quantity lubricationElectric handwheel HR 4103D Touch Probe Type MP 10 EVisport (Fabrikat Hema)Heat exchanger Type SK3328 (Fabrikat Rittal)2 Hand spray guns Technical Specification Fjdpfxez Iyppj Akyogh Taper Size SK 40

Condition: new, functionality: fully functional, operating pressure: 165 bar, empty load weight: 222 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KRANZLE THERM 1165-1 TR TECHNICAL DATA: Model: KRANZLE THERM 1165-1 TR Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 1165 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 155 Operating pressure (bar): 165 Maximum pressure (bar): 180 Connected power (kW): 6.4 / 5.0 Power cable length (m): 7.5 Weight with accessories (kg): 222 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1300 KRANZLE THERM 1165-1 TR pressure washer EQUIPMENT KRANZLE [123272] pressure gun (M22 / quick coupler) Spray lance: KRANZLE [12420] (quick coupler) 25° flat jet power nozzle [D2507]. Flat high-pressure jet with high surface coverage and good dirt removal power. Integrated pressure hose reel 20m Professional-grade pressure hose [443812] WHY CHOOSE THE KRANZLE THERM 1165-1 TR? The THERM 1165-1 TR is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. Fgsdjy Sf N Ujpfx Akyeh The THERM line emphasizes smooth operation and continuous operation, making the 1165-1 TR model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. The standard equipment includes a high-pressure gun with lance, 20m high-pressure hose, hose reel, and a 25° power nozzle. The device also features a D12 quick-release coupling system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 1165-1 TR RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires repetitive use. Additional handles allow for transporting the device with additional equipment. A brass pump head extends the device's service life. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. The standard equipment includes a high-pressure gun with lance, 20m high-pressure hose on a hose reel, and a power nozzle. The device also features a quick-release coupling system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: new, functionality: fully functional, operating pressure: 130 bar, empty load weight: 164 kg, input voltage: 230 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM CA 11/130 TR TECHNICAL DATA: Model: KRANZLE THERM CA 11/130 TR Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 1 / 230 / 50 Pumping capacity (l/h): 660 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 130 Maximum pressure (bar): 145 Connected power (kW): 3.4 / 2.3 Weight with accessories (kg): 164 Fuel tank capacity (l): 25 Fgsdpfx Aksy Shl Ssyjh KRANZLE THERM CA 11/130 TR WASHER EQUIPMENT KRANZLE pressure gun (M22 / quick coupler) KRANZLE spray lance (quick coupler) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. Integrated pressure hose reel 15m professional-grade pressure hose External water filter by KRANZLE WHY CHOOSE THE KRANZLE THERM CA 11/130 TR? The THERM CA 11/130 TR is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. A major advantage of this model is its power supply via a single-phase 230V socket, which translates into high mobility in terms of power supply points. The THERM line emphasizes smooth operation and continuous operation, making the CA 11/130 TR a unit suitable for use in a broad range of industries. Additional handles allow for easy transport of the device with additional accessories. A brass pump head extends the life of the device. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 15m high-pressure hose, a reel, a 25° power nozzle, and an external water filter. The device also features a quick-connect attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM CA 11/130 TR RELIABLE | DURABLE | ERGONOMIC Thanks to its frame, the device can be used in hard-to-reach places or where work often requires repetitive use. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the life of the device. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling performance even with fluctuating ambient and water temperatures. Standard features include a high-pressure gun with lance, a 15m high-pressure hose reel, and a power nozzle. The device also features a quick-connect attachment system, allowing for 5x faster accessory changes than traditional threaded connections. Single-phase power supply (230V) Original, integrated high-pressure hose reel included! The device is brand new and factory-sealed.

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothG, total height: 2,807 mm, table load: 1,200 kg, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis Mazak VCN-530C was manufactured in 2020. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,300 x 550 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VCN-530C vertical machining centre we have for sale. Contact us for further details. Working area and travels Fgedpfx Asz Iqy Eekyjh • Table-to-spindle nose: 150–660 mm • Column surface to spindle centre: 586 mmTable • Dimensions: 1,300 × 550 mm • T-slots: 5 × 18 mm; pitch 100 mmSpindle • Drive: Electrically selected two-range • Spindle bearing bore: 70 mm • Acceleration time: 2.0 s • Motor power: 18.5 kW (5 min) / 11 kW (40% ED) / 7.5 kW (S1)Feed rates • Rapid traverse X/Y/Z: 42 m/min • Cutting feed X/Y/Z: 1–42,000 mm/minAutomatic tool changer • Max tool diameter: 80 mm (adjacent tools) / 125 mm (adjacent pockets empty) • Max tool length: 350 mm (from gauge line) • Tool selection: MAZATROL random memory, shortest-path • Tool-to-tool time: 1.3 sCoolant and chip management • Through-spindle high-pressure coolant: approx. 15 kgf/cm² (~14.7 bar) • Coolant tank: 250 L • Coolant flushing for covers • Manual washdown gun • Workpiece air blast • Preparation for mist extractionControl functions and probing preparation • Synchronous tapping • Maximum program size: 8 MB • G00 Slope Constant (rapid movement optimisation) • Preparation for Renishaw OMP60 workpiece probeMachine dimensions • Floor space: 2,880 × 3,102 mm Additional equipment • Kitagawa NC rotary table, MR250 series (Type: MR250RAE13) • Date of manufacture: Oct 2020 • Weight: 85 kg • Mechanical mounting for MR250 included • CROWTHER left-side hinged-belt chip conveyor • Additional working-area lighting • Three-colour LED signal tower • Polish manuals and safety labels Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Fgsdpfjvvi Iqsx Akyeh

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00705, load capacity: 125 kg, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/125L manufactured in 2011.11. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2011.11 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3005 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1190   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.11 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10 Fgjdpfxjz H Uyms Akyeh    

Condition: ready for operation (used), Year of construction: 2020, operating hours: 20,292 h, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Z-axis: 1,240 mm, spindle motor power: 33,000 W, overall weight: 7,200 kg, controller manufacturer: SIEMENS, controller model: Siemens 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI CLX 550 V3 was manufactured in 2020. It features a maximum turning diameter of 480 mm and a turning length of 1240 mm. The machine is equipped with a 12-position VDI 40 turret and a maximum spindle speed of 3250 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V3 horizontal turning machine we have for sale. Contact us for further details. • Control panel: DMG MORI SLIMline Multi-Touch, 19-inch touchscreen • Controlled axes: 3 (X, Z, C) • Spindle operating hours: approx. 20,292 hWorking capacity and axes • Max turning diameter: 480 mm • Max turning length: 1,240 mm • Swing over bed: 700 mm • Swing over cross slide: 500 mm • Rapid traverse X/Z: 30 m/min • Main spindle C-axisMain spindle and chuck • Spindle nose: A2-8 Fodpfx Akez Ipaweyegh • Upgraded bar capacity: 102 mm • Spindle power: 33 kW @ 40% / 22 kW continuous • Spindle torque: 630 Nm @ 40% / 420 Nm continuous • Hydraulic chuck: SMW BH-D 320 / A2-8, D103 mm • Differential clamping pressure functionTool turret and driven tools • Turret: 12-position VDI 40 with 6 additional BT stations • Driven tools: yes • Max driven-tool speed: 4,000 rpm • Driven-tool power: 5.44 kW @ 40% • Driven-tool torque: 20 Nm @ 40%Tailstock • Tailstock travel: 1,200 mm • Centre taper: MT5 • Max thrust: 12 kNEquipment and options • Setup package • Tropical climate package • 12-bar coolant supply system • Manual working-area washdown gun • Variable spindle speed function • DMG MORI Service Agent • DMG MORI Messenger V2 • DMG MORI NETservice • DMG MORI IoTconnector • Screen languages: German/PolishConstruction • Inclined cast-iron bed • Linear guideways, width 45 mm Additional equipment • Mechanical oil mist extraction unit, 1,100 m³/h • WTO VDI 40 driven-tool holder set • Set of three soft jaws for BH-D315 chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00693, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/250F manufactured in 2011.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/250F Model Number: A05B-1329-B215 Year of Manufacture Robot: 2011.12 Warranty term (months): 12   Payload (kg): 250 Reach (mm): 2655 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Fgsdpoz Izmvofx Akyjh Installation Type: Floor Mount Weight (kg): 1270   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.12 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: good (used), Year of construction: 2011, functionality: fully functional, 5-axis machining center Hedelius RS 805 K Control system: Heidenhain iTNC 530 Year of manufacture: 2011 Internal machine number: 78 Travel ranges: X-axis 1,500 mm Y-axis 800 mm Z-axis 600 mm Tool holder: SK 40 Tool magazine: 30 positions Spindle speed: 12,000 rpm Accessories: - Inclined bed coolant system SKM 900 - Internal coolant system 25 bar Fodpoz Iw Tfsfx Akyjgh - Chip conveyor - Operating panel - Air blow guns - Flushing guns

Condition: reconditioned (used), Year of construction: 2008, operating hours: 1,592 h, functionality: fully functional, working width: 650 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 74 l, Hako Hakomatic B70 CL TB650 Scrubber-Dryer New SIAP 6V 175Ah gel batteries (4x) Year of manufacture: 2008; operating hours: 1,592 650 mm cleaning head (TB650) equipped with two new medium-stiffness disc brushes, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger and wheel drive facilitate daily operation The unit is equipped with a new, durable drain hose and a new suction hose A new suction motor ensures high water pickup power from the squeegee Each unit we offer features unique, actual photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage (V): 24 Brush working width (mm): 650 Squeegee working width (mm): 950 Theoretical coverage (m²): 3200 Working speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 INCLUDED: NEW 6V 175Ah SIAP gel batteries (x4) NEW 330mm PPL 0.5 disc brushes (x2) NEW 24V 600W suction motor NEW suction hose Fgodpjz Nkrxsfx Akyoh NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: The 72-liter tank allows for a large volume of cleaning solution, minimizing the need to stop work for refills The machine's design ensures excellent maneuverability. A tight turning radius allows for operation even in narrow passageways and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. A wide working width (650 mm) ensures high area coverage. A highly legible and intuitive control panel.

Condition: excellent (used), Year of construction: 2021, EMCO E350, SIEMENS 828D, 10,000 RPM 3-axis CNC milling machine with integrated 20-position tool magazine. Control: SIEMENS 828D Spindle: Speed: 10,000 RPM Spindle power: 7 kW Torque: 41 Nm Tool holder: SK30 ISO7388-1 (DIN 69871) Pull stud: ISO7388-3 (DIN69872 Type A) Travel: X=350mm, Y=250mm, Z=300mm Spindle nose to table distance: 120-420mm Rapid traverse X, Y, Z: 24 m/min Table: Cast iron table with T-slots Number - Width - Pitch: 5 - 12 - 45 Clamping area: 520 x 300 mm Maximum table load: 100 kg Tool changer: Drum magazine with 20 tool positions Tool change time (tool to tool): 2.5 seconds Coolant: Standard pump 3.5 bar Work area lighting: Via 1 halogen spotlight Standard equipment: o Central lubrication o Thread cutting without collet o Spindle blow-out device for cleaning the tool holder during tool changes o Coolant tank 140 liters o Vibration-damping leveling feet o Mounting angles and heavy-duty anchors Year of manufacture: 2021 Machine No. Q4A211601 Includes: Control language: Italian NC handwheel, portable Fastening material ET420/345/332 E45/65 MT45/65 Fgodpfxjz Nm A Tj Akysh Leveling element FK03/NBR05/NBR9014 Heavy-duty anchor FH18x80/50 B M12 Fastening material High-pressure coolant system 50Hz Coolant gun Warning light, LED, 3-way, side-mounted E350 Operating manual / ITALIAN

Year of construction: 2021, condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Westtech Woodcracker CS610 compact grapple saw / incl. Power-Tiltator / Year of manufacture: 2021 / in stock & immediately available / good condition Price: €31,990.00 net / €38,068.10 gross - Cutting diameter: 610 mm - Grapple opening width: 1,280 mm - Weight (basic - fully equipped): 830 - 1,060 kg - Recommended flow rate: 65 - 110 l/min - Recommended flow rate for auxiliary function: 40 - 60 l/min Fgsdoz Nuxijpfx Akyjh - Recommended operating pressure: 230 - 280 bar - Service weight of carrier vehicle: 15 - 20 t - Saw head: actively sprung - Chain lubrication: grease Equipment: - incl. Power-Tiltator We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. In our warehouse, we have a very large selection of various Westtech products that are immediately available! Mr. Herden (Tel. [phone number]) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you! Errors and prior sale excepted! Internal No.: 421020 = Further information = New: No Part suitable for: Application forestry Please contact Marius Herden for further information.

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00688, load capacity: 700 kg, arm reach: 2,832 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/600 manufactured in 2012.06. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/600 Model Number: A05B-1328-B211 Year of Manufacture Robot: 2012.06 Warranty term (months): 12   Payload (kg): 700 Reach (mm): 2832 Repeatability (mm): ± 0.4 Controlled Axes: 6-axis Installation Type: Floor Mount Fjdjz I Tlkspfx Akysgh Weight (kg): 2800   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.06 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: reconditioned (used), functionality: fully functional, pressure: 150 bar, input voltage: 400 V, overall weight: 130 kg, warranty duration: 6 months, temperature: 155 °C, Kärcher HDS 695 Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 150 bar and a flow rate of 800 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 800 Operating pressure [bar]: 150 Max. Heating temperature [°C]: 85–155 Connected load [kW]: 5.6 Detergent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct detergent dosing via the machine Fedpfez Nxlgox Akysgh Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Water softener tank (for RM110) prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, input voltage: 400 V, overall weight: 136 kg, warranty duration: 6 months, temperature: 150 °C, NILFISK ALTO NEPTUNE 4-54X HOT WATER PRESSURE WASHER BUILT-IN HOSE REEL The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A dual-nozzle pressure lance allows for stepless pressure adjustment. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 200 bar and a flow rate of up to 1000 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 1000 Operating pressure [bar]: 200 Max. Heating temperature [°C]: 80–150 Connected load [kW]: 7.9 Detergent tank [l]: 10 Hose length [m]: 20 Weight [kg]: 136.5 EQUIPMENT: Built-in hose reel NEW heavy-duty spray gun from the German brand R+M NEW dual lance with pressure adjustment NEW reinforced 20m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE Fjdpfoz Nyfuox Akyogh KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct dispensing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service

Year of construction: 2021, condition: used, functionality: fully functional, The iCombi Pro is the latest combination oven from Rational. The iCombi Pro 20.1/1 GN electric model, with 20 GN 1/1 compartments, is easy to operate even for untrained personnel, as it achieves outstanding food quality without requiring constant monitoring. The combination oven has undergone a comprehensive inspection in our in-house workshop and is therefore fully functional. It comes with a 6-month warranty on all electrical parts. You will receive an invoice with VAT shown. The recommended retail price is: €25,520 net / €30,368.80 gross. Our price: €10,907.56 / €12,980 gross. These are example images; actual images will follow shortly. The unit will be available shortly, as inspection work is currently being carried out. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional - or your money back. Flexible shipping or self-pickup options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 Technical data: W x D x H: 877 x 913 x 1872 mm Minimum door opening dimensions for transport W x H: 900x1900mm Serial number: E21SJ21092917087 Year of manufacture: 2021 Max. loading capacity / compartment: 5 kg Max. total loading capacity: 100 kg Weight of electric appliance: 254 kg Electrical connection conditions: Voltage 3 NAC 400 V Electrical connection capacity: 37.2 kW Steam operation power: 36 kW Hot air power: 36 kW Fuse rating: 63 A Water connection conditions: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Condition: Used, inspected and fully functional. Further details: Temperature range: 30°C to 300°C Senses the current cooking chamber conditions Recognizes the size, the amount of food loaded, and the product condition and calculates the browning accordingly Learns which cooking habits are used most often and implements them Determines the ideal cooking path to the desired result MyDisplay - user-adjustable, user-specific operating display TFT color display and touchscreen Application and operating manual can be accessed on the appliance display Core temperature sensor with automatic error correction in case of sensor failure and positioning aid Door - triple glazed, energy-saving LED interior lighting Fgedpfxez Ib S Se Akysh Includes energy consumption display Humidity regulation: percentage-accurate humidity measurement and setting Individual programming of at least 350 cooking programs with up to 12 steps Spraying adjustable in 3 levels USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separator system without additional grease filter Cool-down function: rapid cooking chamber cooling Automatic adjustment to the installation location (altitude, climate, etc.) Appliance door with ventilated triple-pane glass and pivoting inner pane Wastewater fixed connection permissible according to SVGW Separate solenoid valves for soft and warm water up to +30°C Automatic start time preselection adjustable with date and time Material inside and outside made of stainless steel DIN 1.4301 WiFi module integrated Subject to change and errors.

Condition: refurbished (used), Year of construction: 2024, machine/vehicle number: R-00723, load capacity: 50 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB Plus, teach pendant manufacturer: A05B-2518-C302#EGN, Refurbished FANUC M-710iC/50 manufactured in 2024.03. The robot comes with an R-30iB Plus controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/50 Model Number: A05B-1125-B201 Year of Manufacture Robot: 2024.03 Warranty term (months): 12   Payload (kg): 50 Reach (mm): 2050 Repeatability (mm): ± 0.03 Fedpfx Ajz Ny Hrokyogh Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iB Plus Year of Manufacture Cabinet: 2024.03 RCC Length (m): 7   Teach Pendant: A05B-2518-C302#EGN Teach Pendant Cable Length (m): 12

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00666, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/210F manufactured in 2016.12. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/210F Model Number: A05B-1333-B205 Year of Manufacture Robot: 2016.12 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2016.12 Fsdpfjz Ny S Isx Akyjgh RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: i Series, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2021. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. Fedpfxez N E Dvs Akyegh • 2 units available • CNC control: FANUC i Series (15" display, 2 MB program storage / up to 1,000 programs, Ethernet connection) • Rapid traverse X: 36 m/min • Rapid traverse Y: 36 m/min • Rapid traverse Z: 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Coolant gun • Ball screw nut cooling • Tool breakage detection in the magazine • Automatic doors • Robot interface • Preparation for 4th axis • Coolant level sensor • Mist collector interface Additional equipment • LNS MH500 chip conveyor • Belt-type oil skimmer • HIWIN RCV 250 rotary table (4th axis) • HIWIN RTS 250 support (tailstock/support for 4th axis) • Hydraulic unit 200 bar, 2 A+B • Hydraulic fixture support for 4th axis • Seat air check Technical Specification Taper Size BT 40

Condition: reconditioned (used), functionality: fully functional, pressure: 195 bar, input voltage: 400 V, overall weight: 222 kg, warranty duration: 6 months, fuel tank capacity: 30 l, KRÄNZLE THERM 895-1 HOT WATER PRESSURE WASHER NEW FUEL PUMP The unit comes with new accessories, including a gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. The high-pressure hose reel makes winding and storing the hose easy. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With operating parameters of 195 bar and 895 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features unique, actual photos; you are buying the exact machine shown. TECHNICAL DATA: Model: KRANZLE THERM 895-1 Fsdsz N A T Uopfx Akyogh Supply voltage [V]: 400 Flow rate [l/h]: 895 Operating pressure [bar]: 195 Heating power [kW]: 6.4 Hose length [m]: 20 Fuel tank [l]: 35 Weight [kg]: 222 EQUIPMENT: NEW fuel pump NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 20m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Clear, intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service

Condition: used, Year of construction: 2003, Format: 390 x 285 mm Equipment: Book stacker Book Format Dimensions (Height x Width) Minimum format: 115 x 100 mm (down to 115 x 70 mm with optional small-format modifications) Maximum format: 390 x 285 mm (up to 390 x 310 mm with specific produ Fodpezphl Rofx Akyegh Book Thickness Minimum thickness: 5 mm Maximum thickness: 90 mm Stacking and Pile Height Maximum stack / pile height: 340 mm Operational Performance Mechanical capacity: Up to 3,900 cycles per hour (or roughly 65 cycles per minute) Infeed and Rotation: Features a built-in turning device capable of rotating the blocks gently