Edgebander

FORMAT4 TEMPORA 60.06 glueBox x-motion

Condition: excellent (used), Year of construction: 2022, Used edge banding machine - OLIMPIC K 360 R - Year of manufacture: 2022 - Available from November 2025 Dledpfxoxhc Evs Ab Toa - additional photos/video available

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: 0-200-73-4868 Excellent condition – used only for demonstration and sample production. The machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical specifications and equipment: - Continuously adjustable feed speed: 16–25 m/min - Workpiece thickness: 8–60 mm - Fixed fence on the left-hand side - Adjustable working height - Pre-installed for LOOPTEQ O-200 / O-300 return system - Feed lock system - Workpiece alignment at infeed with roller support - Top pressure unit - Sizing package with DIA joint trimming cutter set WD40 - Gluing package with preheating up to 60 mm thickness - Adhesive application system with emptying function - Edge magazine with two vertical roll holders - Pressure zone - PERFORMANCE2 package - End trimming unit PK25 - Rough trimming unit BF10 (I-HM straight cutter set) - Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) - Multi-scraper MN21 automatic with profile knife set - Cleaning agent spraying unit - Glue joint scraper FA20 BASIC - Buffing unit FP10 top and bottom - PowerControl PC23 PowerTouch control system - TAPIO Ready - Ethernet network connection Djdpfx Absxwurys Tsla - Wired manual control for setup operation - WOODCOMMANDER software package with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions - Documentation in Slovenian (digital and paper format) - Remote service enabled

Condition: excellent (used), Year of construction: 2023, Single-sided edge banding machine Make: Felder / Format 4 Model: Tempora 45.03 L Year of manufacture: 2023 Edge bander with pre-milling unit Edge thickness: 0.4 - 3 mm Workpiece thickness: 8 - 45 mm Dljdpsxrbkfofx Ab Toa Pre-milling unit Gluing station for PUR/EVA End trimming saw unit Flush/radius milling unit Corner rounding unit Cleaning spray unit Buffing unit Control unit: Smarttouch 15" touchscreen Set-up length approx. 4300 mm Total connected load: 14.5 kW Voltage: 400 V, 50 Hz, 3-phase, 22.8 A

Condition: reconditioned (used), Refurbished edge banding machine BRANDT AMBITION 1440 Dlodpfx Absw S E Rqs Tsa

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, Dedou R S Nwjpfx Ab Tsla surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, Year of construction: 2020, functionality: fully functional, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, type of input current: three-phase, Further technical data: Ball-bearing turntable for edge banding rolls, Ø 740 mm Edge thickness: 0.4 – 3 mm Workpiece height: 8 – 45 mm Extendable workpiece support up to 450 mm Manually adjustable workpiece height m-motion and x-motion PLUS control systems (highest setting repeat accuracy, programmable) Robust processing units in new design, solid machine base, precise extraction system Additional equipment: Djdpfx Aexdb U Ueb Tela Surface scraper Spraying unit for cleaning agent LED lighting package Tempora 45.03 Spraying unit for release agent Cross-cut saw unit with 45° travel path and radius processing Pneumatic-mechanical infeed lock 75 x-motion PLUS package Tempora 45.03

Condition: excellent (used), Biesse Stream 5.5 A Edgebander Mileage: 246,000 m Top pressure belt, fluids Pre-milling cutters, Glue application, Pre-melter for PUR adhesive The glue pot is equipped with a glue drain Pneumatic pre-cut guillotine, Pressure rollers fluids Flush trim saws, Top and bottom trimming unit with straight cutters Top and bottom multi-cutter trimming unit Two corner rounding units Fluids Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Dlodpsxxlqvefx Ab Toa Polishing unit, The machine is equipped with NC control for routers and a pneumatic package, Max workpiece height 60 mm, Max edge banding thickness in roll: 3 mm, Feed rate: 12, 18 and up to 20 m/min The machine is in very good condition.

Condition: new, Year of construction: 2025, Edge thickness 0.4 - 3 mm Thickness of glued boards 12 - 45 mm Minimum length of glued boards 80 mm Minimum width of glued boards 60 mm Mechanical feed speed 8 / 11 / 13 m/min. Glue temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Pre-milling head speed, main 12,000 rpm Rounding radius R=2mm Working pressure compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Glue heating unit 1.5 kW Final milling unit 0.37 x 2 kW Main milling unit 0.75 kW x 2 Transport belt unit 1.5 kW Overall dimensions 3850 x 700 x 130 mm Weight 1000 kg Pre-milling: diamond cutter. Gluing Cutting Milling: two motors Radial scraper Flat scraper (glue) Spray system Polishing Dljdpfx Aov Dt Speb Toa Interior lighting Automatic lubrication

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived in 2025) MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Technical specifications: Edge thickness for rolls: 0.4 - 3 mm (depending on material) Edge thickness for strips: 0.4 - 8 mm (depending on material) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Restrictions may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: Motorized pressure bridge adjustment Extendable workpiece support XL, 600 mm spacing 3-color LED light in the infeed Motorized adjustment of the infeed guide Long infeed guide 1252 mm I-Tronic package Edge Control PPC 322 W Dodsxymd Tspfx Ab Tela IntelliSet: intelligent Tool correction f.a.s.t = fast setting technology ECO mode Energy saving mode Prepared for RETURN connection (third-party manufacturer) BS 501 guide system; right-angled workpiece feeding for front edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm FG201 jointing unit with 2 64 mm high milling heads MG 301 edge feeder GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° pivoting for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reactant (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power supply and automatically compensates for any vacuum loss. - PUR fully under control! DW 301 printing unit with motorized NC axis; 1st roller driven by pneumatic plunge control, 2 conical pressure rollers GM301 spray unit after printing unit with lubricant for high-gloss edges KA 501 pneumatic trimming unit (60 mm) Extraction hoods for trimming unit FR301 MOT6 multifunctional trimming unit Shelf program FF 301 MOT1 profile trimming unit ZK301 MOT4 scraper unit including high-gloss package FK702 surface scraper Complete spray unit for separating and cleaning agent GM 301 spray unit after printing unit (high-gloss edges) SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: Short-term Storage location: Hochheim

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Dlodsxix Hxopfx Ab Toa Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Radius scraper: Yes