Used Gallmac Wmw 115 for sale (458)

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 2,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, die cushion stroke: 160 mm, clearance between the columns: 800 mm, stroke length: 500 mm, power: 8.75 kW (11.90 HP), Hydraulic press PYE 25 S1M. Year of manufacture: 1990. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Operating pressure: 16 MPa. Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Clear opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Machine is in very good technical condition. Fully overhauled. Inspection and test run under power possible on site. Isdpetzwxdofx Afietn

Condition: good (used), Brush cylindrical grinder, external cylindrical grinder, internal cylindrical grinder, centering grinder, center grinding machine, hydraulic universal cylindrical grinder, polishing machine -Manufacturer: WMW Heckert, Hydraulic universal cylindrical grinding machine -Spindem lotor: VEB 0.8/1 kW / 1410/2840 rpm -Hydraulic drive: ADDA 0.75 kW Isdpfx Afeg Uggteiotn -Centre height: 270 mm -Max. material diameter: Ø 320 mm when converted -Brush: max. Ø 250 mm -Center distance: 420 mm -Dimensions: see photos -Base cabinet: with extensive accessories incl. -Dimensions: 1720/920/H1230 mm -Weight: 790 kg

Condition: used, Technical details: Itsdpfeu Nkw Rsx Afien weight of the machine approx.: 179 kg space requirements of the machine approx.: 0,75 x 0,335 x 0,340 m Use: for forging work Material cast steel Working surface LxW: 510 x 140mm Horn length: 225mm Ø 28 - Ø 110mm Mandrel square 28 x 28mm *

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Itsdpfehv A A Djx Afion Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition

Condition: good (used), TGL: 28561/01 Table number: 14167 Iedpfjmikdhsx Afijtn diameter: 315 mm footprint: 380 x 600 mm Height: 150 mm Accessories/equipment: graduation on table 360°, rotatable Condition: good weight: 75 kg dimensions: 600 x 600 x 320 mm dimensions with frame: 700 x 700 x 1.500 mm

Condition: good (used), Year of construction: 1984, max. wheel diameter 400 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t Itsdpfx Afjv T Nqasion

Condition: used, Price: On request Cylindrical grinder grinding machine Model: Conventional Manufacturer: WMW Type: SU-200 Center-distance: 800mm Center-height: 100mm Grinding diameter: 200mm Grinding-stone-diameter: 400mm Table: 1000x200mm Including multiple tools and peripherals Iodpfswnhz Eox Afistn Machine-dimensions: 2500x1500x1600mm Machine-weight: 4200kg - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Spline hobs, gear cutters, modular milling cutters, gear hobbing cutters, gear form cutters, modular milling heads, shell end mills, cylindrical milling cutters, milling cutters, hobs, spline hobs -Manufacturer: WMW PWS, 29 hob cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 490/300/H70 mm -Total weight: 30.7 kg Isdpfegfcm Hex Afistn

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min distance table/horizontal spindle: min.: 60 / max.: 180 mm table surface area: 1070 x 270 mm table load: 1000 kg table swivelling +/-: je 45° Grad feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m clamping surface area: 315 x 1250 mm Itedju Ndf Ispfx Afien Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm *

Condition: ready for operation (used), Nominal force: 2500kN, operating pressure: 20MPa, ram speed down/up: 210/110mm/s, ram stroke: 500mm, throat depth: 360mm, max. distance between table and ram: 800mm, rated current: 41A, control voltage: 60V, rated voltage: 380V, connected load: 20.5kW, weight: 8t. An on-site inspection is possible. Iedpfx Aoxcx Aasfietn

Year of construction: 1966, condition: good (used), Machine number: 6665/66 TyP / Model: PEDV 10/II-S Pressing force: 10 t table: 450 x 300 mm ram: 190 x 140 mm ram stroke: 6 to 50 mm ram adjustment downwards: 45 mm table adjustment upwards: 140 mm drop-through hole: 140 mm throat: 170 mm distance table ram max.: 320 mm stroke rate: 160 /min sheet thickness single stroke: 2 mm sheet thickness continuous stroke: 1 mm power supply: 1,2 kW Accessories/equipment: Condition: good weight: 1,0 t dimensions: 900 x 850 x 2.200 mm Iedpsh Tktijfx Afietn

Condition: good (used), Year of construction: 1972, Slideway grinding machine WMW SFBZ 2200/6000 Manufactured by WMW Germany in 1972 Main technical data: Table size: 2240x6000 mm Max. grinding width: 2200 mm Iodpfx Aow U A Rmefiotn Max. grinding length: 6000 mm Max. grinding height: 2000 mm Max. workpiece weight: 15000 kg For more information, please contact us.

Condition: used, Year of construction: 1977, Control type: conventional Ijdjwdivvepfx Afistn Axis travel: X: 1120 mm Y: 345 mm Z: 400 mm Vertical feeds: 5 - 250 mm/min Longitudinal and transverse feeds: 16 - 800 mm/min Table area: 400 x 1600 mm Speed range: 28 - 1400 rpm Tool holder: SK50 Total power requirement: 14.5 kW Machine weight approx.: 3.65 t Space requirement approx.: 2345 x 1950 x 2060 mm (LxWxH) External control cabinet with plug-in connections. Equipment: - 3-axis digital display - Pivoting control panel (suspended) The machine can be tested/demonstrated live on-site. All information is provided without guarantee. Subject to prior sale.

Condition: good (used), Bezel, steady rest, lynette -max. passage: Ø 210 mm -Centre height: 390 mm Itodped S Iyxefx Afien -technical drawing: in the photos -Dimensions: 600/125/H625 mm -Weight: 53.5 kg

Condition: used, Technical details: width:: 905 depth: 1200 mm height: 2600 mm weight of the machine ca.: ca. 4,0 / pro Winkel t Two of these clamping brackets are for sale. Itedpfeval Nrjx Afisn Material made of steel, surface finished T-slot according to DIN 650: a=22; h=36; b=39; c=17.5 mm, center distance T-slot to T-slot = 250 mm Foot clamping with 4x slotted hole Ø 21 x 30 mm There are 4 M24 holes each on the side wall (left-right) *

Condition: ready for operation (used), Year of construction: 1977, center height: 230 mm, grinding length: 1,000 mm, grinding diameter: 315 mm, capacity 1000×460 mm Itjdpfx Aswv S U Sjfien

Condition: new, TyP / Model: for WMW drilling machine Total length: 1.140 mm Diameter rod area: 50 mm Length of the pick-up sleeve: 190 mm Itedpfx Aobptmdjfijn Diameter sleeve: 78 mm Mounting: MK 5 Condition: obviously unused Weight: Dimensions: 1,140 x 78 mm

Condition: used, Year of construction: 1968, Technical details: bore capacity in St 60 - full boring: 40 mm drill capacity in cast iron: 55 mm turning diameter over bed: Ø 22 - 2200 mm clamping diameter: ca.: Ø 100 innen / Ø 200 außen mm Total power requirement: 5,0 kW machine weight approx.: 1,2 t dimension machine xH: 1,70 x 0,80 x 1,40 m Relieving lathe This machine can also be used as a milling head (as a side support). Designation: horizontal unit drilling machine with EB 40 Design: drilling other technical features: Headstock: Itedpfxju Iwwzj Afijn - Speed 22 - 2000 rpm - feed rate range 0,025 - 0,5 U/mm - three-jaw chuck Ø 190mm with bore Ø 54mm, equipped with internal jaws - headstock bore 45mm - drilling spindle taper MK 5 Operation via control panel on the side of the machine. By removing the lathe chuck, the spindle can be used as a drilling unit. max. slide adjustment 300 mm accessories: -div. outer jaws for lathe chuck i.D. *

Condition: used, Technical details: Pressure: 160 t slide stroke: 32...140 mm no. of strokes: 50 Hub/min throat: 400 mm dayligth: 400 mm adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) Itodpfou N Dfhox Afion - foot control or manual via hand possible - last check record was 2006 can be demonstrated under power! i.D. *

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. Itsdpfx Aou N A U Ijfion 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: used, Technical details: Isdeu N E Evepfx Afietn material thickness: 1,0 mm material width: 17,0 mm internal diameter: 30,0 mm external diameter: 78,0 mm Spare part for bench drill BT 2 Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available *

Condition: used, Technical details: x-travel: 500 mm y-travel: 380 mm z-travel: 330 mm control: Siemens 840 D / 810 D spindle cone ISO: vertikal/horizontal: 40 table surface area: 400x800 fest mm Itodpfx Afeu Nc R Nsisn spindle turning speed - continuous: verikal/horizontal: 35-1800 U/min spindle head swivable left - right: 90 ° rapid traverse X,Y: 3,15 mm/min. rapid traverse Z-axis: 1,6 m/min feed continuous: X/Y/Z: 6,3 - 1250 Total power requirement: 7,4 kW Weight approx.: 1,8 t dimension machine xH: 1,8 x 2,2 x 1,8 m dimensions electric cabinet LxWxH: 0,5 x 0,85 x 2,1 m Machine was rebuilt in 2002, modernized with a modern control Siemens 840D/810D shopmill. - adjustment travel via counter holder slide: 440mm Equipment: - cooling system - control panel with jib arm Accessories: - various collet sleeves - div. SK 40 tapers - various milling arbors i.D. *

Condition: used, Technical details: grinding wheel diameter: 240 mm saw blade diameter: 600 mm total power requirement: 1,1 + (0,37 kW) kW weight of the machine approx.: 600 kg Saw Blade Sharpening Machine Machine performs grinding process automatically saw blade continue to move automatically grinding wheel diameter: max.: 240 mm driving motor for feed (0,37 KW) Itedpfx Aju Ng Edefisn *

Condition: used, Technical details: pressure: 160 t throat: 760 mm slide stroke: 32...140 mm distance between table / ram: 400 mm ram adjustment: 100 mm no. of strokes: 50 Hub/min table:: 760x1000x95 passage opening in table: 400x350 mm clamping surface ram: 630x850 mm clamping plate: 760x1010x92 mm total power requirement: 15 kW weight of the machine ca.: 6,2 t dimension machine xH: 2,9x1,2x3,4 m dimensions electric cabinet LxWxH: 0,8x0,45x2,1 m - via two hand control - copy of documents digital available Machine can be demonstrated under power. Itjdpsu Nfhqjfx Afisn *

Condition: used, Technical details: bore capacity in steel (diameter): 40 mm throat: 360 mm bore stroke: 280 mm spindle taper MT: MK 5 spindle speed:: 32 - 1400 U/min feed: 0,11-1,73 mm/U connected load: 6 kW Distance spindle/table max.: 750 mm table clamping surface:: 780+650 mm drill table adjustment: verical 800 mm column diameter: Größe: 230 x 950 mm dimension machine xH: 1,1 x 0,8 x 2,8 m Iodpfewid Uwex Afijtn weight of the machine ca.: 1,5 kg for thread cutting clockwise and counter clockwise operation *