Frame- & Staircase- & Mortisingmachine

Gannomat Master 325

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement Dsdpfjxdttpex Ab Tjwf 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: new, power: 6.77 kW (9.20 HP), Year of construction: 2024, SCHORR track dumper RR500DHKAH PRO - Discover the advantages: - 9.2 hp four-stroke engine - Self-propelled & powerful track drive - Hydraulic scissor lift (discharge height 1.44m) - 500kg payload - Large & high-quality tipper body with large tipping angle - Folding passenger platform as standard - 6+2 gears SCHORR TRACK DUMPER DHKAH PRO WITH TIPPING HYDRAULICS, RIDER PLATFORM AND SCISSOR LIFT The SCHORR RR500DHKAH track dumper has a hydraulic tipping drive and a payload of 500 kg as well as a powerful 9.2 hp single-cylinder 4-stroke petrol engine. The special feature of the RR500DHKAH is the hydraulically controllable scissor lift function. This allows you to eject the transported material up to a height of 1.44 m - ideal for trailers, containers or other higher areas. Dodpfx Absttg Ups Tjwf Thanks to its slim design (700 mm), the minidumper can also drive through narrow paths and doors, making it an extremely flexible means of transportation. Thanks to the minidumper's powerful track drive, you can also overcome rough terrain, inclines and kerbs with ease. The rubber tracks provide a secure footing in any working area. Lifting and lowering the tipper body / box is effortless and effortless thanks to the hydraulic tipper drive, even when fully loaded. With a robust body made of thick sheet metal and a straight outlet that ensures quick and easy discharge, this dumper is a must for anyone who needs to transport heavy loads. Even tipping on slight inclines is no problem. The large tipping angle ensures that even fully loaded skips are emptied completely without you having to help manually. This saves time and effort and makes the motorized wheelbarrow an indispensable tool for anyone who values efficiency and performance. TECHNICAL DATA: Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR500 Model: DHKAH Load capacity: 500kg Tilt drive: Hydraulic (stepless) Travel drive: Chain Weight without/with packaging: 363 / 388kg Drive Engine: Air-cooled 1 cylinder four-stroke engine (OHV) Starter: Reversing starter Power: 9,2PS Gearbox: 6 forward gears / 2 reverse gears Speed: forward gear Forward gear: max. 8km/h Reverse gear: max. 5km/h Liquids Fuel tank capacity: 6L (unleaded gasoline) Hydraulic oil tank capacity: 3L (ISO VG 32) Transmission oil tank capacity: 1.5L (SAE 80W-90) Engine oil tank capacity: 0.9L (15W-40) Max. Hydraulic oil flow rate: 9L/min Basic dimensions Total length platform folded: 1900mm Total length platform unfolded: 2100mm Total width (incl. chain): 710mm Overall height: 1050mm Container dimensions (inside): 740 x 665 x 435mm Container dimensions (outer dimensions): 1060 x 710 x 520mm Track width: 710mm Load volume (liquid): ~ 200L Load volume (heaped): up to 370L (depending on load) Drive chain dimensions: 180 x 60 x 38mm Ground clearance: 120mm Packaging size: 1890 x 740 x 1220mm Filling height Side: 1030mm Front: 810mm Discharge height min./max.: 810 / 1440mm We at SCHORR are happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or e-mail. We look forward to hearing from you and being able to help you with advice.

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Especially designed for staircase construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drilling are easily achievable thanks to the swivelling drilling unit. - Motor with pole changing, two speeds - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor start via convenient handle switch - Equipped with Röhm two-jaw chuck 1–20 mm - Linear laser for precise workpiece positioning - Drilling unit can swivel 65° left and right - Pneumatic adjustment of machining height; dowelling possible on two levels without resetting Dwjdexmatnopfx Ab Tjf - Desired drilling heights can be set for each level via a digital counter; switching is then pneumatic from the front - Cross movement 340 mm, stepless or in 12 mm increments with indexing rail - Pneumatic clamping possible at any position, controllable from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column repositionable to the front - 2 swivelling workpiece supports - Suction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Set of drill bits - Operating manual - CE mark - Machine was partially repainted due to existing paint splashes - Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "other offers from this provider."

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 300 mm minimum workpiece length: 250 mm aggregates: 2 brush units separately adjustable 1. brush: scotch brite medium / diameter 220mm, vario drive 2. brush : Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: Handwheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Dwsdpji Hpk Uofx Ab Tsf Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely variable) Motor power feed: 0.37 kW Machine length: 1400mm machine width: 900mm Weight: 500kg

Condition: excellent (used), SCM S520 thicknesser Working width 520mm Working height 250mm Feed speed adjustable: 4 steps Shaft with conventional knives 4 knife shaft Power 4kw Weight 670kg Dwedeitkx Ejpfx Ab Tof

Condition: new, Year of construction: 2025, flue capacity: 350 kW Conventional yeld capacity: 279 kW flue diameter: 200 mm hot air delivery pipes: 3 x 300 mm flue length: 1200 mm oven width: 740 mm oven hight: 1040 mm air flow: 17800 m³/h power consumption hot air fan: 3 kW power consumption flue gas exhaust: 600 W aproximate surface to heat up: 5000 m³ area to be heated: 1000 m² heater height without hot air conveying pipes: 2500 mm heater width: 1100 mm heater length: 1900 mm Dwedok Utrtjpfx Ab Tof weight: 850 kg

Year of construction: 1998, condition: good (used), I sell the multiple drilling machine with inserting KOCH Sprint-PTP Year: 1998 Number of drilling spindles 1 Number of inserting heads 1 Programming CNC-driven Z-axis Working width 1200mm Working height max. 36mm Dsdpsd Exwgjfx Ab Tjwf Available immediately

Year of construction: 1997, condition: excellent (used), Window making machines WEINIG automatic tapping and slotting machine UNITEC 10, year 1997 profiling and milling machine UNIVAR 10, year 1997 Dwjdjiix Uvjpfx Ab Tjf

Year of construction: 2022, condition: new, No. 04320 Edge grinding machine VOLPATO LVO 150 T New machine, 100% made in ITALY Djdpfx Asia N Nxsb Tewf Year of construction 2022 Immediately available from stock Combined edge sanding machine with multiple work options. Independently motorized belt oscillation, mechanically adjustable up to a maximum stroke of 20 mm. The complete sanding unit can be swiveled up to 45° from the vertical, every angle in between is continuously adjustable. In the basic setting, designed as a 1-station solid sanding machine, it can be converted in a very short time for precise veneer sanding using the veneer edge sanding device included in the scope of delivery. Thanks to the 1-place solution, the machine can also be set up against a wall to save space. The basic equipment includes a 5-part set of grinding wheels (Ø 25-30-35-40-45-50 mm). By using different belt grains, you can achieve different surface finishes and degrees of wood removal. Belt dimensions 2640 mm Abrasive belt width 150 mm Working table 940x460 mm Sanding belt speed 15 m/s Belt drive motor 4 kW Motor for oscillation 0.15 kW Diameter driven roller Ø 75 mm Additional work table 350 x 300 mm Sanding rolls Ø 25 – 30 – 35 – 40 – 45 – 50 Swing stroke 15 mm Diameter dust hood Ø 100 mm Including operating instructions in English Including confirmation of compliance with CE standards Other scope of delivery as shown Terms of delivery: from stock Transport dimensions approx. 1650 x 1100 x 1350 mm LWH Weight approx. 250 kg Visitation on site possible by appointment Technical information, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale The manufacturer's warranty regulations apply to new machines

Condition: as good as new (ex-display), Year of construction: 2025, Spindle swivels: No Height adjustment: Handwheel Pivot adjustment: - Dwsdpfxogzlpke Ab Tsf Milling jaw adjustment: manual height indication: mech. counter Swivel angle display: - Milling stop indicator: mech. counter Milling spindle diameter: 30 mm speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg