Used Four Head for sale (11,972)

Condition: used, Planer- and edge-boring machine Weinig Unimat 23 for four-sided planing and profiling of woods with feeding magazine EM13 and groove bed. The machine is equipped for separation (sawing) on spindle 4 and for short parts. It has meter-scale blanks cut from woods. Bedpfx Aoyanu Ueafelc spindle: 6 spindle 1: Bottom / 40 mm spindle 2: Right / 40 mm spindle 3: Left / 40 mm spindle 4: Top / 50 mm / 6,000 RPM / 18.5 kW spindle 5: Top / 40 mm spindle 6: Bottom / 40 mm working width: 230 mm working height: 130 mm Driven table rollers: 3 feed: 5,5 kW

Condition: used, machine/vehicle number: ZLMW, Year of construction: 2017, operating hours: 10,413 h, load capacity: 2,500 kg, lifting height: 6,200 mm, free lift: 1,850 mm, load center: 600 mm, construction height: 2,700 mm, fork length: 1,150 mm, front tire size: , rear tire size: , enginetype: Electric, manufacturer: Jungheinrich Bledpfx Aaeydgiljfjc

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 7,551 h, load capacity: 3,000 kg, lifting height: 4,500 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, drive type: Treibgas, Four-way sideloader Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Blodpfx Aasydf Nqofec Fork positioner,

Condition: used, inner taper of milling spindel / collet diameter / turning speed range / U/min Bljdpfxol Ichvo Aafec

Condition: used, inner taper of milling spindel / collet diameter / Bedpfxshprk Ho Aafslc turning speed range / U/min

Condition: used, inner taper of milling spindel / collet diameter / Bsdpshwt Elsfx Aafolc turning speed range 1500 U/min

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice Bljdjpl Tgmopfx Aafsc - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, WEINIG UNIMAT SUPER 4 four-sided planer with EM 15 hydraulic feeder Year of production 2003 TECHNICAL DATA: - min / max width of the processed element 45 / 150mm - min / max height of the processed element 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW 3) horizontal lower 5.5kW spindle diameter 40mm Bedov Dm U Dopfx Aafelc

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Excellent technical condition of machine. Bodpfswltqaex Aafjlc

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Bledpfoxddwrox Aafec Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: good (used), Year of construction: 1996, Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm Blodpfxoh Dwl De Aafsc grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Condition: good (used), Year of construction: 2009, We sell a 12 heads flat embroidery machine Tajima TFSN-912 Bodpfxeyc El Ns Aafjlc Field 680x360 9 needles 12 heads Touchscreen control panem Check by technician Dimensions : 5500x1800mm heigth 1630mm Weigth : 1786kg

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 134, 1 x Langhi Sistemi Srls single-head linear weigher. This weigher can be mounted on stand or operate as a table-top unit and is perfect for weighing small granular products such as coffee, pasta, rice, beans, or lentils. Technical specification: Model – LS RCT1. Serial number – 134. Date of manufacture - 2023. Weighing range - 50g-3000g. Bledpfx Aaswrnacefoc Speed - up to 20 drops/minute, depending on weight and product. Hopper capacity - 4.5 litres. Controls - PLC control with 7'' touch screen. Electric supply - 230 V / 50-60 hz / 1 phase. Features: This linear weigher can store up to 10 preset programs for different products. Condition: Excellent, the weigher has had very little use.

Condition: used, Universal Facing and Boring Head WOHLHAUPTER Type UPA 3 Serial No. 54562 Tool Holder: SK 40 - M16 + OTT ring groove Tool Shank Holder: Ø 18 mm Blsdpfx Aaoxcbl Rsfoc Adjustment Accuracy: 0.01 mm - Accessories as pictured - Original wooden storage box Total weight: approx. 5 kg Good condition

Condition: like new (used), Ricoma 1502 Embroidery Machine Perfect working condition! • 2 heads and 15 colors • Maximum embroidery area: 560 × 360 mm Warranty & Delivery Components: the machine is delivered complete Quality assurance of the equipment is fully provided by our team of professional technicians. Bedjycvwpepfx Aafelc

Condition: used, Technical specifications: Maximum planing width: 240 mm Maximum planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 6 Spindle configuration: bottom 5.5 kW right/left 7.5 kW Bjdeycu R Ijpfx Aafolc top 5.5 kW top 5.5 kW bottom 5.5 kW universal 5.5 kW 1/4/5/6 spindles on separate motors 2/3 on a single motor Ribbed worktables Ribbed rollers in the table: 2 Upper steel feed rollers: 5 Upper rubber feed rollers: 3 Extraction port diameter: 6 x 140 mm Infinitely variable feed rate Feed drive on cardan shafts Lubrication pump for worktable 2 smooth rollers in the table Pressure: 6 atm. Electric elevation of machine body Power supply: 400 V Total power: 32 kW Overall dimensions: Length: 4600 mm Width: 2000 mm Height: 1800 mm

Condition: reconditioned (used), Year of construction: 2005, NC indexing head Hofmann RWNC 160 Center height: 160 mm With tailstock Bledswtfpdjpfx Aafjc

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m Bledsx Uru Nopfx Aafjc

Condition: excellent (used), Year of construction: 1990, LEDINEK BSG 150 head sharpener with knife setting device Bljdpsihpl Rsfx Aafec - in a warehouse - Slovak production TECHNICAL PARAMETERS engine power 0.55 kW sharpening length 440 mm tool diameter 125 mm - 203 mm manual feed spindle diameter 50 mm knife setting device Machine dimensions: 120/85/165 cm weight 400 kg

Condition: used, Year of construction: 1979, functionality: fully functional, Milling head MAHO MH 800P SK 40 taper Automatic tool draw-in Quill feed Bodjx E Tc Nopfx Aafjlc

Condition: used, A used steel stacking container with Euronorm dimensions of 800x600 mm is a robust and durable storage solution for industrial environments. With a generous 200-liter capacity, the container offers ample capacity for heavy or bulky materials. Bodpfex Ahnxox Aafjlc The storage container is made of gray-painted steel and equipped with profiled, closed steel

Condition: used, A used stacking bin made of painted steel with dimensions of 975x610x510 mm (lxwxh) and a capacity of 163 liters is a versatile and robust storage tool. With its sturdy walls made of flat steel plates, this bin can carry heavy loads without deformation. The storage bin stands on four legs with an insertion height of 100 mm. This Bledpfew Sw D Asx Aafjc

Year of construction: 2020, condition: excellent (used), LICHTER LRK 400 PVC PIPE HEAD FOAM CORE PIPE HEAD-THREE LAYER Bljdpswqgitofx Aafsc Application: PVC FOAM CORE PIPES KG-U PVC pipes Accessories: Tools for the production of pipes in diameters 250 mm, 315 mm and 400 mm The pipe head was in operation for about 1 year, due to business closure. Condition not new but in very good condition Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Germany

Condition: used, We have different type of Pump-Heads as well. Operating Temperature: 0° to 40°C (32° to 104°F) Storage Temperature: −45° to 65°C (−49° to 149°F) Chemical Resistance: ABS plastic case with polyester label; gold, iridite-coated aluminum chassis; zinc-plated screws. All materials withstand standard cleaning solvents Line Voltage Limits: 230 V, 50–60 Hz Power Output: 0.075 kW (0.1 hp) Maximum Current (230 V units): 1.1 A, shorted output conditions Start/Stop – Local Control Input Voltage: Disable 15 V DC (typ) Blodpfxeycgpve Aafoc Enable 0.8 V DC max Start/Stop – Local Control Input Current: Disable 100 µA max leakage Enable 15 mA max Maximum Torque (300, 600 rpm units): 13 kg·cm (180 oz-in) Maximum Torque (1100 rpm units): 26 kg·cm (360 oz-in) Speed Regulation – Line: ±1% Speed Regulation – Load: ±2% Speed Drift: ±10% Enclosure Rating: IP23 per IEC529 Humidity (non-condensing): 10% to 90% Altitude: Less than 2000 m Display: Green LED Dimensions (L × W × H): 292 mm × 203 mm × 184 mm (11-1/2 in × 8 in × 7-1/4 in) Weight: 25 kg (55 lb)

Condition: good (used), Year of construction: 2007, SCM Compact XL four-side planer - Italian production - year of production 2007 TECHNICAL PARAMETERS: planing width 230 mm Blodehrdmijpfx Aafec planing height 120 mm 1) horizontal, lower 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2nd and 3rd spindle) 11 kW 4) horizontal, top 230 mm 7.5 kW all spindles up / down, right / left spindle diameter 40 mm from the top 3 introducing rollers, metal, torsion, including 2 double top pulling roller, double rubber pressure 1 pc on the side a rubber pulling roller in the lower table top feed on cardan shafts pneumatic clamps smooth regulation of the feed speed 5-22 m / min 1.1 kW feed motor electric setting of the planing thickness 0.37 kW lifting motor the length of the introducing table top 2470 mm locked in the cabin central lubrication of the table top diameter of the extraction nozzle 150 and 180 mm dimensions (length / width / height) 3650/1200/1600 mm weight approx. 1500 kg