Used Forming for sale (4,113)

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Ncedpfx Ajq A Um Rohvop Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Njdpsq Nn Hcefx Ahvjcp Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Ncodjhbu E Hspfx Ahvjp Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 Nsdpfen D Ew Ijx Ahvecp 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: excellent (used), Year of construction: 1993, machine/vehicle number: 818S9145, (Sticks labels on sheets) Specifications: High accuracy :  0,25 mm;  0,009" at any speed, depending on label and paper materials High speed: up to 85m/min (270 fpm), in-line or off-line, depending on label paper materials and size Any label size : and any intermediate size, in increments of 1/6", 1/8" or 1/10" max 24" depth x 16" wide min 1/2" depth x 1/2" wide Any label shape: stars, figures, circles, angular shapes, etc… Label materials: self adhesive labels, piggybacks, flexible plastic cards, holograms, booklets, etc… Paper size: max 24" depth x 18" wide - min 3/6" depth x 2"6/8 wide Label waste diameter : max  8" Height paper pack: max  17" Height label pack: max  9,5" Folding depth : cascade folding Weight :  360 KG Electrical requirements: 220V or 110V or 100V, single phase, 50-60 Hz, 16A Ncsdpjxmitdofx Ahvep The machine worked together in production with CROSS AND LONGITUDINAL CUTTING MACHINE BÖWE 310 (5517) // Ref. No.: 31014.25

Condition: like new (used), The CS-Matic 100 is offered together with the matching infeed conveyor (Audion ACC2000/4, year of manufacture 2021). The machine runs fully electric—no pneumatics, no compressed air required—making it exceptionally quiet in operation. Packaging capacity: up to 4,200 packs per hour (depending on product size, package configuration, and film type) Conveyor speed: 10 – 30 m/min Maximum package height: 200 mm Maximum package width: 400 mm Maximum package weight: 30 kg Sealing length: 500 mm Maximum film size: 600 mm (center-folded – ø 350 mm) Compatible films: Polyolefin (up to 30µ), Polyethylene (from 15 to 80µ with optional PE sealing bar) Machine dimensions (L x W x H): 2,170 x 1,875 x 1,665 mm Machine weight: 715 kg Nedpfx Ahsyrm D Esvecp - Automatic centering seal adjustment - Automatic control of sealing bar height - User-friendly LCD control panel, 7" color touchscreen - Storage and retrieval of process statistics (counters, package length measurements, real-time output, machine performance, irregular pack detection) - Electronically adjustable conveyor speed - Single pack/multi-pack mode - Continuous, fully electric 4.0 packer with 2 belts - Cross sealing bar with PTFE-coated sealing blade, controlled via inverter and encoder - Faulty package detection - Inverter and encoder controlled This system allows all operations to be managed simply and precisely. - Power and control section - Electronically controlled conveyor speed - Reduced power consumption

Condition: excellent (used), Milling machine for wood Make SAC type ts 80 4 milling spindles : Speed : 2900 - 4000- 5800 - 8000 n1/min Milling cutter stroke 150 mm Table 1000 x 800 mm Nedpfxetyv Aae Ahvocp 3 roller feed unit make ELU infinitely variable speed Motor 380 Volt 2800 n1/min. 11,3 Ampere 5,5 kw Transport dimension : L.1020 mm W. 800 mm H.1650 mm, with pallet Weight 470 kg

Condition: used, sheet width 400 mm plate thickness 3 mm stations . System with the best coiler, straightener, eccentric press, and profile rolling machine Cutting-off system and numerous accessories Iron double coiler Type SFD 2000 Schleicher straightener Edelhoff AZR 3/100 eccentric press Press force 100 t Stroke adjustment 20-110 mm Ram adjustment 100 mm Ram strokes 105 /min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Nsdpfx Ahjyq Sx Esvecp About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1982, sheet width 480 mm plate thickness 3 mm stations 13 weight of the machine ca. 11 t dimensions of the machine ca. 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Nodpfeyqtx Hsx Ahvscp Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours Njdoh Uhqyspfx Ahvjcp - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Njdpfxjhrakvs Ahvecp Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: like new (used), The VPX is used for: * Producing pouches from flat packaging material (film). * Filling the pouches with product which can be powdered, liquid, granulated, chunky and must have flowability and suitability for automated operation. * Closing the pouches by heat sealing or thermoplastic welding. Characteristics: * Roll diameter/width (max.): 450/550 mm (600/550 with unwinding device). * Bag width (min. - max.): 60-260 mm. * Bag length (min. - max.): 40-340 mm (680 mm with double drive). * Filling volume (max.): 3000 cm³ (8000 with double drag). Production output varies depending on product, format and filling capacity. Nodpeyn Hqqsfx Ahvscp

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 45802, Handtmann RF 440 round former with vacuum filler for the automatic production of dumplings and balls with homemade quality. Year of construction 2021 very little used condition like new! Ncjdpfxeyk U Eze Ahvep

Condition: used, Year of construction: 1993, voltage 220 V collets 8mm Ncsdpfeyk Ibiex Ahvsp Motor output 1,8 kW

Condition: excellent (used), OPEM Arabella Vacuum Coffee Packaging Line – 250 g – with Gas Flushing & Valve System – Year 2005 Manufacturer: OPEM Model: Arabella Year of manufacture: 2005 Condition: Very good, fully functional Location: Germany Availability: Immediately available Machine Description For sale is a complete vacuum coffee packaging line for 250 g bags (ground or whole beans). The system is equipped with: • Vacuum brick packaging system • Inert gas flushing (nitrogen flushing) • Integrated aroma valve system (degassing valve) • Including dosing system • Packaging from roll stock • Compact monoblock design • Industrial-grade, "Made in Italy" This machine is ideal for freshly roasted coffee and guarantees optimal aroma preservation and extended shelf life through the combination of vacuum, inert gas flushing, and valve. Technical Data • Pack size: 250 g • Packaging type: Vacuum brick pack and soft-gas-pack bags • Output: approx. 20–30 bags/minute (depending on product) • Gas system: Nitrogen flushing • Valve system: Integrated • Dosing system: Included • Packaging from roll stock • Year: 2005 Scope of Delivery • OPEM Arabella main machine • Dosing system • Gas flushing unit Ncodoynn A Ijpfx Ahvsp • Valve application system • Control cabinet / electrics Spare parts available

Condition: ready for operation (used), functionality: fully functional, For sale is a Rovema form-fill-seal machine for packaging coffee in weight ranges from 500 g to 1,000 g. The machine is fully operational and features an integrated aroma valve system for coffee pouches with freshness valve. Technical specifications: • Suitable for 500–1,000 g of coffee • Integrated valve system Nedpfxjynntme Ahvjcp • Robust, durable construction • Ideal for ground coffee or whole beans • Comprehensive spare parts package included This machine is manufactured to high German quality standards – solid, reliable engineering (good traditional workmanship). Inspection or demonstration available by appointment.

Year of construction: 1992, condition: excellent (used), Roller Rolling Machine Make Abele & Höltich Ncsdpfx Asg Tcn Iohvop type BB 20 YEAR 1992 roll diameter 180 mm 5,5,kw 400 Volt space requirement : W.2400 mm depth 2100 mm height 1800 mm Documents available

Condition: used, Year of construction: 1990, Heavy-duty rollforming line 10 stations Ncsdpfsymzzuox Ahvsp Width: 260 mm

Condition: used, Year of construction: 1990, HEAVY DUTY ROLLFORMING LINE 11 STATIONS Ncjdpjymzywofx Ahvjp WIDTH: 450 mm

Condition: used, Year of construction: 1990, HEAVY DUTY ROLL FORMING LINE 9 STATIONS WIDTH: 450 mm Ncodpfx Aoymzxyohvep

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total length: 3,400 mm, total width: 600 mm, total height: 1,400 mm, warranty duration: 18 months, overall weight: 500 kg, input voltage: 400 V, power: 3 kW (4.08 HP), compressed air connection: 8 bar, air pressure: 7 bar, Equipment: documentation/manual, Made in Ukraine, CЄ. 18 month full warranty. SAS200 – Automatic Casing-Free Forming & Cutting System for Meat, Fish, and Pet-Food Snacks This professional system is designed for the industrial production of high-margin, casing-free snacks such as mini salami, meat sticks, jerky strips, fish snacks, and pet treats. The SAS200 can be connected to any standard rotary vacuum filler — including Handtmann, REX, Vemag, or our own gear-driven vacuum filler. Main Features: • Output capacity: up to 200 kg/h • Forming nozzles: cylindrical (Ø8–20 mm) and flat (25×5 mm to 200×5 mm) • CE certified, industrial-grade • Stainless steel, hygienic design Ncjdpfx Aep S Nv Iohvep • Pneumatic guillotine with automatic water cleaning • Integrated decompressor for uniform extrusion • Operator control via 10.1” TFT touchscreen (Delta) • Incl set drying trolleys 30 rows with 60 trays 900 x 500mm (60 trays, 30 rows) Compatibility: ✅ Works with most rotary fillers (Handtmann, REX, Vemag) ✅ Also available with our own gear-driven vacuum filler (200 L) Live demo available in: • 🇬🇧 Ashford, United Kingdom – Windsor Food Machinery • 🇵🇱 Kraków, Poland – REGIS Showroom

Condition: used, Tube ends – forming machine BLM (Italy) used tube end forming machine BLM for tubes with six-position turret Drive power: 7.5 kW max. tube diameter approx.: 40 mm Max. forming length estimated: 80 mm Nodeymgckjpfx Ahvscp Weight approx.: 1.5 t

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Nedpfx Ahokvmi Sjvecp Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, total length: 690 mm, total width: 1,380 mm, total height: 1,620 mm, overall weight: 540 kg, type of input current: three-phase, input voltage: 400 V, power: 1 kW (1.36 HP), funnel diameter: 380 mm, DGUV certified until: 03/2027, ambient temperature (max.): 40 °C, Rheon Model KN100 Cornucopia Encruster Maximum speed approx. 60 pieces per minute, depending on the product. Nsdpforhvu Ajx Ahvjcp Weight capacity from 10 - 90 grams. (2) stainless steel feed hoppers, each 11.5" x 8" x 7", each with (2) feed augers of 2.5" diameter. Approx. 5" wide discharge conveyor. Digital touch control. Compact forming, filling, and portioning machine. Machine is mobile. Connection: 400V, 16A CEE plug. Used machine. Delivery service available. More bakery machines in stock!

Condition: good (used), functionality: fully functional, total length: 400 mm, total width: 430 mm, total height: 380 mm, overall weight: 49 kg, type of input current: AC, input voltage: 230 V, year of last overhaul: 2024, product length (max.): 75 mm, power: 3 kW (4.08 HP), product length (min.): 75 mm, working width: 400 mm, DGUV certified until: 03/2027, ambient temperature (min.): 20 °C, ambient temperature (max.): 40 °C, TOP variobaking device for 13 tartlets Stainless steel tabletop unit Ncodpfxeuat Abe Ahvsp Temperature adjustable up to 300°C Robust technology Connection: 230V Dimensions: 430 x 400 x 380 mm (W x D x H) Used device, cleaned Further bakery machines in stock!