Used Forming for sale (5,908)

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Ncsdpfx Aeuzv Tzsmyew Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, Year of construction: 2026, NEW Snap lock roofing panel roll forming machine SL-1 Snap lock roofing panel roll forming machine SL-1 is designed and manufactured by our company as one of the flagman equipment for metal roofing panels production. Following machine makes standing seam roofing panels with self-closing lock on sides (snap lock). The main advantage of such lock system is the easy way of installation: to connect two panels with each other you just need to cover bottom part with top part and press it with some force, you will hear specific click noise at this very moment. That is why name of system is self-closing lock one. Comparing to standard standing seam roofing panels with mechanical lock which you need to close with special tools or equipment, snap lock panels are much easier to install and don’t require additional expensive devices for work. To fix panels at the roof frame you can use standard self-tapping screws, to make it possible, while rolling machine makes special fixation holes on one side of roofing panels. Such simple product design also helps to save costs and make installation process easier, not spending money on clips purchasing, comparing to the standard standing seam metal roofing with mechanical lock installation. So standing seam roofing with snap lock is easier to install, does not require high skilled employees and cut expenses for additional machines purchases. Total high of panels - 31mm As per order, we can also make machine for 26mm panels high. Machine has 10 pairs of forming rolls. One of the rolls has special punching parts so can cut fixation holes at roofing panel for further installation operations. Cutting tools are made from tools steel with heating and polishing, so have longtime working period. Maximum metal width can be 700mm, minimum 250mm. Snap lock roofing panel roll forming machine SL-1 is width easy adjustable one, so to adjust machine from one panel width to another you just need to rotate special handle. Rolling length – unlimited Rolling speed (m/min.): about 7 As extra options, you can get: - cross cutting knife; Nsdpfeiuz T Iox Amyocw - length measuring device; - ribbed panel rolls; As per customer preferences snap lock roll forming machine can be equipped with automatization system and electric shears for panels cutting. Standard supply set of self-closing lock roll former machine SL-1 includes safety covers to protect working parts of machine from foreign objects. Snap lock machine can work with various types of metal: galvanized steel, copper, aluminum, color coated metal, etc.

Condition: used, Year of construction: 2001, functionality: fully functional, For sale is a vertical form, fill, and seal machine from Rovema. With two shoulders, maximum bag size 35 cm wide. Running. Dimensions of the packaging machine: Njdpfjv Saugjx Amyocw Approx. Width 1.30 m Height 2.15 m Length 2.70 m Weight: 1,000 kg

Year of construction: 1986, condition: good (used), Technical Details : Products - - Flats - 10x3 - 25x3 mm 10x4 - 25x4 mm 12x5 - 20x5 mm - Square - 6x6 - 12x12 mm Nodpfx Asd H Ur Ajmyecw - (T) Profile - 20x10x3 mm - ( L) Profile - 15x15x3 - 18x18x3 mm Raw Material wire - 8,9,10,11,12,13,14,16 mm Transformer Power - 20 Kw Speed - 35m/min

Year of construction: 1996, condition: excellent (used), The line is an original American-made line for upgrading sections of rollers for drawing profiles. The American-made line has a plate and a huge number of additional rollers for pulling pipes! - Year - 1996 Ncedpjh Ni Dusfx Amyjw - Line use pulsed TIG welding for argon blowing and it can be upgraded by laser and resistance. - Electric consumers 30 kW. - Profiles - stainless steel profiles ellipse, D profiles, hexagonal, square and rectangular pipes. - In profiles of all dimensions from sheet metal width 125 mm and thickness 1 to 2.5 mm. - Speed - 30-90 m/h - Cutting unit - cross section by hand or with a band saw. - Line length 12 to 15 meters.

Condition: good (used), functionality: fully functional, total length: 400 mm, total width: 430 mm, total height: 380 mm, overall weight: 49 kg, type of input current: AC, input voltage: 230 V, year of last overhaul: 2024, product length (max.): 75 mm, power: 3 kW (4.08 HP), product length (min.): 75 mm, working width: 400 mm, DGUV certified until: 07/2027, ambient temperature (min.): 20 °C, ambient temperature (max.): 40 °C, TOP Vario baking unit for 13 tartlets Stainless steel countertop unit Nodpfx Amouat Abjyjcw Temperature adjustable up to 300°C +++ robust technology +++ Connection: 230V Dimensions: 430 x 400 x 380 mm (W x D x H) Used unit More bakery machines in stock!

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Njdpfx Ameq A Um Rsyecw Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 PRICE GREINER STACKING: € 6.500.- / LOT SWITZERLAND Heating from above and below Njdpfx Aoq Nn Hcemyecw Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle. Ncjdpfx Amshbu E Heyow

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool (PRICE FOR TOOLS: € 2.500.- / FOR EACH TOOL): Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Ncodpfon D Ew Iox Amyjw Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: ready for operation (used), A horizontal flow pack packaging machine RGD Mape is available. Packaging speed: 30m/min, max. packaging capacity: 100packages/min, product length range: 30mm-450mm, product width range: 10mm-240mm, product height range: 10mm-120mm, max. film width: 600mm, max. film outer diameter: 350mm, film core diameter range: 60mm-110mm, max. film roll weight: 35kg, machine weight: approx. 450kg. Documentation available. An on-site inspection is possible. Nsdpfx Aozdunhjmyscw

Condition: used, Year of construction: 2007, machine/vehicle number: 2288, Manufacturer: CFS Njdpoyw Sadefx Amyjcw Model: ESF400 Year: 2007 Condition: Used Serial Number: 2288 Stock Number: 3295 Belt width: 400 mm Capacity: max 30 strokes/min Hopper: 250 litres Water: max 4 Bar Compressed air: 6 Bar, 300 l/min Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2250 x 900 x 2350 mm Weight: 780 kg

Condition: ready for operation (used), Year of construction: 2007, A horizontal flow wrapping machine with side sealing Hugo Beck is available. Film feed: roll, max. film width: 500mm, film web width: 550mm, max. film roll diameter: 350mm, min. product length: 100mm, product width range: 10mm-450mm, max. product height: 250mm, cycle output: 100/min, max. mechanical speed: 28m/min. Machine dimensions X/Y/Z: approx. 2250mm/1500mm/1300mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible. Ncedpfozc Rfbex Amyow

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, total height: 1,850 mm, total width: 1,400 mm, total length: 2,000 mm, film width: 600 mm, Ideal machine for very flexible bags (Vol up to 60 Liters) Impusl sealing for PE-Films Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Ncodpfx Asv Dwbbjmysw Machine is in very good condition.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Ideal machine for very flexible bags (Vol up to 60 Liters) Impusl sealing for PE-Films Ncjdjx I D Tkopfx Amyew Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Machine is in very good condition.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Ideal machine for very flexible bags (Vol up to 60 Liters) Nedsx I Ecmjpfx Amyecw Impusl sealing for PE-Films Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Machine is in very good condition.

Year of construction: 2025, condition: used, functionality: unexamined, Complete Automatic Roll Forming Line (fully compatible with all Unistrut products) Year of manufacture: 2025 Model: CIRF-2019-2486 Unistrut 41 x 41 and 41 x 21 profile Approximately 15 meters per minute UK / Irish wiring standard (UK wiring schematics, safety pull cord system around main beds) Ncjdozc Hkgjpfx Amysw with 2-ton de-coiler 3-stage, 3-ram punching unit (Hole Size: Approx 12mm × 25mm / Hole Spacing: Approx 50mm centers) Fully automatic upstroke shear Auto Hydraulic Logo printer/stamper Discharge table Overall Length: Approximately 30 meters

Condition: used, -Total length: approx. 3,500 mm Ncjdpfxewxyk Te Amysw -Conveyor belt width: 650 mm -Output: 4,000 to 5,000 croissants per hour, depending on piece weight (30–40 g per piece) -Maximum dough thickness: 15 mm -Belt speed: adjustable between 30 and 150 mm/s -Serial number: A-5487 -Electrical power: 1.7 kW -Voltage: 400 V / 50 Hz -Year of manufacture: 2006

Condition: used, - Dimensions: 1100x900x1330 mm - Serial No.: 9624893 - Year: 2006 - Plate: 400x600 - Control panel with keypad - Brand: BRAVO - Model: QUIKLY - Voltage: 220 V - Weight: 240 kg - Power: 1.5 kW Nodpfowxym Iex Amyocw

Condition: good (used), Year of construction: 2006, 1 CNC tube end forming machine Manufacturer: BLM Type: Tube Form M32x1.5 Year of manufacture: 2006 Technical specifications Thrust force: 3.5 tons Locking force: 5 tons Working stroke: 130 mm Tool diameter: 80 mm Nodpjn Sm Ddefx Amyjcw Dimensions: 2400 x 1400 x 2000 mm Connected load: 12 kVA Weight: 2200 kg

Condition: used, Technical details: shaft length: max. 30 mm capacity: 600 ST/min wire diameter max.: 5 mm working dimensions: 30 mm dimensions electric cabinet LxWxH: 1,45x0,55x2,1 m dimensions of machine: 2,95x1,5x2,15 m dimensions of coil: 1,15x1,15x1,15 m Orbital Cold Forming Machine! - Not not suitable for screw production!!!!! - mechanic cold flow press / machine is unused!!!! - Steel core bullets - Rivets (almost all types: flat rivets, punch rivets, precision rivets, flat head rivets, etc. -----à not for manufacturing semi-hollow rivets, because you will need 2 forming stages, model KEPK - 1 however only has 1 forming stage. - bolts - Pins, chain pins (short) - Lead sheath-weighting for bullets (with straight frames front and rear) - plant like new / never used! accessories: - coil, manual Machine can be demonstrated under power. Please send us your enquiry what you are going to manufacture with that machine. You can also send us a drawing in order to check it if it is possible. Ncodpfx Aeu Nfrcomyow *

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, Sheet metal cutting, stamping, and plastic injection molding tools for the production of garden hand tools (17 pieces, as shown in the pictures). Designed and manufactured in-house, approximately 20 years old. Used, but fully functional. Their combined weight is approximately 11,000 kg. Ncsdpfxszcmgus Amyjw

Condition: new, New Technology Trapezoidal Sheet Roll Forming Machine consists of these parts; Hydraulic Roll Opening and Roll Loading Trolley, 10 T Polyethylene Protective Film Coating Unit, Metal Sheet Aligning Unit, Metal RollForm Generating Unit, 18 & 36 Stations According to Form Type, Flying Continuous Length Sizing Shear Unit, Automatic Stacking and Packaging Unit, Automatic Siemens Electric Control Unit. All of our machines have CE MARKING. Please contact us for additional information and technical documents. Njdpsf Nqghefx Amyocw

Condition: new, Year of construction: 2022, operating hours: 1 h, functionality: fully functional, For sale: İkra Makina IPM 2850 automatic strip and wire bending and forming machine. It features a 12-ton press capacity and a 15 kW servo motor. This ensures precise operation for wires with a diameter of 6-16 mm. The machine comes with tooling suitable for manufacturing pipe clamps. By using other tools, it can bend various types of wires and strips. It was never used for mass production. Only a few test pieces were made on it. It is for sale due to a cancelled project. The offer includes the 6 tools, the press machine, and the matching nut welding machine. Ncedpfxexuhd Do Amysw The sizes of the current tools are: • 40-44 • 48-54 • 55-59 • 60-66 • 68-73 • 75-80

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, number of axes: 4, This 4-axis AgieCharmilles FORM 30 die-sinking EDM machine was manufactured in 2015. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles FORM 30 machine we have for sale. Contact us for further details. Ncodpfx Amoy T R D Heysw