Roll forming line

Dreistern

Condition: used, Original profiling frames with quick-change plates for Dreistern P3.100 profiling machines Profiling frame features: Tool width of frame: 275 mm Working shaft diameter: 50 mm Iedoy Szgijpfx Abxjtg Working shaft connection: 30 mm with keyway Axial adjustment Adjustment range, top/bottom roller: 80 - 170 mm The following quantities are available: 44 pieces, fixed bottom shaft 4 pieces, adjustable bottom shaft Always mounted on 2 or 4 plates.

Condition: used, Quick-change plates for Dreistern P3.125 profiling systems Production direction: left to right The following quantities and sizes are available: 3 pieces for 2 profiling frames (795x790) 3 pieces for 6 profiling frames (2385x790) Some of the tongue-and-groove elements are missing, but can be re-manufactured if required. Itjdpfjy Sxx Aox Abxeg

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Profiling line Dreistern P3.100 with mobile cut-off unit and accessories Machine bed features: Production direction: right to left Axle distance: 330 mm 48 stations 44 stations can be driven (44 gearboxes) Quick-change plates Mechanical quick-release clamps Coolant piping 1 x 42 kW Baumüller motor 1 x 15 kW Baumüller motor Profiling frame features: Tool width per frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft (6 pieces with adjustable lower shaft) Axial adjustment Adjustment range of lower/upper shaft: 80 - 170 mm Gearbox features: Worm gear ratio 1:21 Lower/upper shaft gear ratio 1:1 Mobile cut-off unit features: Travel distance: 1900 mm Profile rail guidance Ball screw drive Bosch servo motor Valve block with punching unit Folding table length: 3000 mm Itjdpsy Sm Eqsfx Abxjg Emergency stop Scope of delivery: Machine bed with gearbox support Infeed table Measuring wheel unit, pneumatic Straightening device Strip filter unit 800 liters Hydraulic unit for separator 44 gearboxes 44 profiling frames 2 Baumüller DC motors 66 universal joints The system operated flawlessly in production until it was dismantled at the customer's facility. Control system not included. Strip unwinder and perforation unit are also available from us as used machines. The system can also be easily extended with additional stations. We can support you with the following when reassembling the system: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Roll Forming Line Dreistern P3.100 with Accessories Machine Bed Features: Production direction: right to left Centre distance between axes: 330 mm 22 stations 18 driven stations (18 gearboxes) Quick-change plates Mechanical quick release clamps Coolant and lubricant piping 2 x 18.5 kW Bosch motors Roll Forming Stands Features: Tool width per stand: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower shaft to upper shaft (UW-OW): 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower shaft to upper shaft ratio (UW-OW): 1:1 Scope of Delivery: Machine bed with gearbox carrier Infeed table Measuring wheel unit, pneumatic Special straightening unit 18 gearboxes 18 forming stands 2 Bosch motors 36 drive shafts The machine was running flawlessly in production until it was dismantled at the customer's site. Control system is not included. Ijdpfoy Sm A Aox Abxjtg Decoilers and punching units are also available as used machines. The line can be easily extended with additional stations. We can support you with the reassembly of the line, offering: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Profiling Line Dreistern P3.100 with Accessories Itjdpfjy Sm Apjx Abxjg Machine Bed Features: Production direction: left to right Center distance: 330 mm 18 stations 16 powered stations (16 gearboxes) Quick-change plates Mechanical quick-release clamps Coolant piping 2x 18.5 kW Bosch motors Profiling Frames Features: Tool width frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower to upper shaft: 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower to upper shaft ratio 1:1 Scope of Delivery: Machine bed with gearbox support Infeed table Measuring wheel unit, pneumatic Special straightening unit 16 gearboxes 16 profiling frames 2 Bosch motors 32 cardan shafts The machine was working flawlessly in production until dismantling at the customer's site. Control system not included. Coil decoilers and punching units are also available used. The line can easily be extended with additional stations. We can support you with reassembly of the line: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, Flying profile cutting machine for Dreistern P3.125 with accessories Production direction: left to right Travel distance: 2000 mm Aluminum carriage with shaft recirculating ball guide Height adjustment via hydraulic cylinder and wedges Disc spring clamping of height adjustment, hydraulically releasable Low-backlash Graessner gearbox with Rexroth servomotor Folding table: Roller guide Hydraulically folding Rollers recessed in the table Dimensions: 380 x 6200 mm Accessories: 7.5 kW hydraulic power unit with cooler and accumulator Infeed roller guide Hole index detection Hydraulic valves on the carriage Punching unit Separation device Original documentation In perfect working condition until disassembly at the customer's plant. Control unit not included. For integration into an existing roll forming line, we can support you with: Planning Mechanical overhaul Control system construction Iedey Sldfspfx Abxstg Painting Safety concept CE documentation

Condition: excellent (used), Year of construction: 2005, dual track rollforming line 2 x 18 stations design: cassette shaft Ø: 30 mm strip width: 200 mm Itedoh Tm Rlepfx Abxeg strip thickness: 1 mm

Condition: excellent (used), Year of construction: 2005, 19 stations Itjdpfeh Tm Rajx Abxog design: cassette shaft Ø: 30 mm strip width: 200 mm strip thickness: 1 mm