Used Flange for sale (1,575)

Year of construction: 2023, condition: ready for operation (used), travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, overall weight: 5,500 kg, total width: 2,840 mm, total height: 2,700 mm, product length (max.): 5,440 mm, table length: 1,000 mm, table width: 500 mm, number of axes: 3, This 3-axis KNUTH HFS 50100 F NC was manufactured in 2023. It features a magnetic table measuring 1000 mm x 500 mm and a powerful total power of 14 kW. The machine includes a coolant system with a paper belt filter and magnetic separator, along with essential accessories such as grinding wheel flanges and precision vises. If you are looking to get high-quality surface grinding capabilities, consider the KNUTH HFS 50100 F NC machine we have for sale. Contact us for further details. Dksdpfx Asz D Tb Rol Aju - Control: Siemens Smart Line Touch- Magnetic table: 1000 mm x 500 mm- Total Power: 14 kW- Voltage: 400 V- Frequency: 50/60 Hz- Grinding wheel size: D350 x 40 mm- Coolant System: Coolant system with paper belt filter and magnetic separator- Included Accessories: 2x grinding wheel flanges, grinding wheel dresser, balancing stand with balancing shaft, 1x Röhm precision vise (PL-120S), 2x Röhm precision vise (PL-70S), hydraulic oil (approx. 80 L in canister)- Documentation: Complete machine documentation and service reports available

Condition: used, diameter 315 mm hollow 100 mm Cone 110 mm flange diameter 135 mm flange 4 weight of the machine ca. . kg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us Morehe tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Dksdpfx Aoz Hd Nwol Aeu If than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, diameter 250 mm hollow 75 mm Cone 138 mm flange diameter 172 mm flange 4 weight of the machine ca. . kg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Dkedpfsz Hd Rhsx Al Aou About us Morehe tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: fully functional, Manufacturer: Haaf (formerly Gema) Type: LZ 185 Swing diameter over bed 365 mm, over cross slide 225 mm Turning length 750 mm Center height 185 mm Spindle bore 40 mm Spindle flange KK5 (DIN 55022) Spindle bore MK5 Speed range 20 – 1,600 rpm Digital display Heidenhain VRZ 773 B in 2 axes (Scales on the cross slide and longitudinal slide) Dimensions 1,900 x 900 x 1,700 mm Spindle brake with foot pedal Adjustable stop on the cross slide (feed shut-off) Splash guard Accessories: - Operating manual - Multifix B holder with 2 inserts - Coolant pump integrated in the machine base (no coolant hose connected) - 3-jaw chuck Röhm 200mm with turning and drilling jaws Weight approx. 950 kg Condition: Used The machine runs smoothly and can be inspected while powered on. All information is without guarantee, errors and omissions excepted; all dimensions are approximate. This offer is non-binding. The machine can be inspected by appointment. Changes and errors in the technical data, specifications and prices, as well as prior sale, are reserved! All prices are net plus VAT. Payable by prepayment, including any freight costs, within 14 days after conclusion of the contract. If the purchase price is not paid in full within this period, the seller reserves the right to cancel the purchase contract. The sale is only made to entrepreneurs within the meaning of § 14 BGB. The machine is sold with exclusion of any warranty for defects. This exclusion does not apply to claims for damages arising from warranty for defects, which are based on a gross negligent or intentional breach of obligations by the seller or his agent, as well as in the event of injury to life, body and health. Any existing claims against third parties arising from warranty for defects are assigned to the buyer. Please understand that I cannot assume any liability for compliance with any safety regulations that may apply to you and are generally required for the sold machine and its components. Such compliance with safety regulations is the responsibility of the final operator. German law shall apply exclusively to all contracts concluded by me, to the exclusion of the UN Sales Convention. Mannheim is agreed as the place of jurisdiction. Dsdpfx Asw Svtcel Ajku

Condition: refurbished (used), functionality: fully functional, The Hamba 2400 is an automatic, single-lane cup filling and sealing machine with a rotary design. The system is specifically designed for filling and airtight sealing of liquid to highly viscous products (e.g., yogurt, cream cheese, cream, sauces, or delicatessen products) into preformed cups. Upon request, the machine can be modified and retrofitted to meet customer requirements. In particular, adjustments can be made for the cup format, the product to be filled, and the product feed system. 1. Technical Specifications and Performance Data Production capacity: Maximum 2,400 cups per hour (dependent on cycle time and product). Dosing range: Flexibly adjustable from 100 to 500 ml (special versions from 5 ml can be realized). Format flexibility: Standard design for round cups with a flange diameter of 75 mm to 95 mm (exchangeable tools can be adapted for different formats or rectangular cups). Indexing cam mechanism: 12-part aluminum rotary table for precise indexing. Machine weight / footprint: Compact dimensions of approximately 1,300 x 1,300 x 2,000 mm with a net weight of approximately 500 kg. Dkjdpfxezzfkbj Al Aju 2. Process Flow and Operation Cup destacking: Automatic cup feed from the magazine using vacuum suction cups into the cells of the rotary table. Cup control: Sensor-based detection (no-cup control) to prevent incorrect filling. Dosing station: Volumetric piston dosing via a stainless steel product hopper (usually with mechanical or pneumatic level control). Flange placement: Precise placement of the pre-cut sealing flange (aluminum or PET) from the magazine. Sealing station: Thermal hot sealing of the flange to the cup rim. Cup outfeed: Automatic lifting of the cups and transfer to a downstream discharge conveyor. Printer and collection tray available upon request.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, total height: 1,900 mm, overall weight: 2,700 kg, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Additional equipment • Voltage: 400 V • With automatic feed • Residue bunker • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Extra Information Dksdpfxez Dth Rs Al Aeu Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Machine Depth 4800 mm

Condition: used, Universal external and internal cylindrical grinding machine CINCINNATI - MSO, Type R75 Serial No. 27782, Year of manufacture 1976 Center distance max. 805 mm Workpiece grinding length max. 800 mm Center height 130 mm Swinging diameter max. 250 mm Workpiece grinding diameter max. 250 mm Workpiece weight between centers max. 75 kg Workpiece weight in chuck max. 20 kg Workpiece spindle speed 50 - 390 rpm Tailstock internal taper MK 5 Tailstock short taper flange DIN 55027, Size 5, Ø 82 mm Tailstock spindle bore 38 mm Headstock internal taper MK 3 Grinding wheel diameter max. 300 mm Grinding wheel width max. 40 mm Grinding wheel peripheral speed 30 m/sec Tailstock quick traverse 50 mm Automatic tailstock feed 0.005 to 0.03 mm Manual feed 0.0025 mm Hydraulic table movement 0.05 - 6 m/min Motor power grinding spindle 3 kW Motor power workpiece spindle 0.75 kW Motor power internal grinding attachment 0.75 kW Power connection 380 Volt, 50 Hz - Feed and plunge system, manual or automatic feed - Grinding spindle swivels +/- 90° - Workpiece spindle swivels 0 to 90° Dksdez Ek Sijpfx Al Asu - Table tilt for taper grinding up to 10° - Counter support / quill for the workpiece spindle with internal taper MK 3 - Internal grinding spindle missing, internal grinding attachment for swiveling - Coolant system adjacent - 1 diamond grinding wheel dresser - 3 grinding wheels with grinding wheel arbors - 1 grinding wheel without grinding wheel arbor - 1 grinding wheel puller - 1 reducing sleeve - 3 centering pins - Several drive dogs - Operating manual with electrical diagram Space requirement L x W x H 2350 x 2000 x 1600 mm Weight 2500 kg Good condition

Condition: new, Ruchser standard offering with layout for a wooden window manufacturing process, including profiled glazing bead and screw-connected corner joints. ----- Daily capacity: approximately 30 windows Djdjytx Ulopfx Al Asku Manufacturing process consisting of: Item 1.0 - Article 107850000 ----- 1 piece RU-PWD-H1600/130/4 profile rack, double-sided, length 1600 mm, width 850 mm, height 2140 mm for horizontal storage and transport of profile cut-to-size pieces. 12 support arm pairs per column, permanently welded to the column, 2 center columns adjustable, clear distance between support arms 130 mm, depth of support arms per side 400 mm, support arms with felt padding, with 4 swivel castors, diameter 150 mm, 2 of which with locking mechanism. Item 2.0 - Article 10776000 ----- 1 piece RU-MSTR assembly station for frame hardware 3000 mm long, 600 mm wide 1 piece shelf for hardware 1 piece support table with felt padding Work height adjustable between 900 - 1100 mm (Without screw units) Item 2.1 - Article 6747 ----- 1 piece guide rail with carriage, 3000 mm long Item 2.2 - Article 6308 ----- 1 piece balancer for tools, 3 to 5.5 kg Item 2.3 - Article 10778000 ----- 1 piece RU-STS-A screw feeder with automatic screw feeding system POWASERT, consisting of screw feeder and feeder unit ADS-MF4, complete with hose connections, screw feeder ADS 2445 RD with torque cut-off. Set to the screw guide used by the customer. Suitable for the following screw dimensions: Shank diameter: 2.4 - 4.0 mm Shank length 10 - 35 mm Head diameter 5 - 8 mm When ordering, information about the screw must be sent to the manufacturer's factory. Item 3.0 - Article 10782000 ----- 1 piece RU-EW-2S storage rack, double-sided Storage capacity max. 36 pieces of frame profiles in L-shape, screwed together, length 1200 mm, depth 800 mm, height 2200 mm, support beams with felt padding, 4 swivel castors, 2 of which with stoppers Item 4.0 - Article 10766000 ----- 1 piece RU-DR-1 rotary table with travel mechanism for frame assembly. Table with parking brake. Support platform with crossbars and one pull-out section each to the left and right with felt padding. Basic dimensions 1400 x 1400 mm, extendable up to 2500 x 1400 mm, work height 900 - 1100 mm adjustable Item 4.1 - Article 5360, permanently mounted tool storage 1000 x 400 mm for RU-DR-1 Item 4.2 - Article 6354 ----- 1 piece 3-meter travel rail for travel mechanism, rail 10 mm high Item 4.3 - Article 6454 ----- 1 piece travel mechanism with flanged wheels and parking brake Item 4.4 - Article 6788 ----- 1 piece corner screwing device, 1 pair of pneumatically height-adjustable clamping units for fixing the profiles at a right angle. Item 5.0 - Article 10383000 ----- 1 piece RU-DK-T14/34 rotary tilting table with pneumatic tilting mechanism. Work platform with 4...

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace Djdszbr U Uopfx Al Aeku

Condition: new, We offer you high-quality roll-off containers as water tanks/water reservoirs, manufactured to your specifications using a self-supporting design. Available to order! Europe-wide delivery! ---FINANCING---LEASE PURCHASE---LEASING--- -possible, please contact us!- Possible dimensions: 4 - 7.0m x 2.30 x 1.0m Possible internal heights: H = 800 mm H = 1000 mm H = 1100 mm H = 1300 mm H = 1500 mm Optional: Rear platform for mounting a water pump Other dimensions available on request!!! We will gladly design according to your specifications. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Dsdezhwccjpfx Al Aoku Material thicknesses: Base: 5 mm Walls: 3 mm Roof: 3 mm Cross member: INP 180 Lifting bracket Ø 50 mm, hook height 1,570 mm - 2 internal baffle plates - Internal level indicator with float - Dome lid with rubber seal, 50 x 50 cm - 1x C-Storz connection below the level indicator - Front/top vent with shut-off valve - Rear with approx. 50 cm platform - Rear with 1x C-Storz connection - Rear with 1x 6-inch flange -> Watertight welded with 24-hour leak test - Primed once internally, twice externally - Externally painted twice in a single color according to your desired RAL color Optionally available: - Protective coating inside, according to specifications for the respective application - Fully galvanized version - Anti-slip coating on the roof - A-B-C Storz connection of your choice - Hydraulic dome lid - Additional rear hydraulics for slide valve - Subframe UNP220 for 22t total weight!

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves Dkodpfx Alocvkals Aju The reduction of the gas pressure regulator The differential air pressure switch Controller minimum gas pressure Luc overall control.

Condition: excellent (used), Year of construction: 2008, The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Dkedoikq Tyepfx Al Asu Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE oil): 100 c/s Maximum suction capacity: 4035 m3/h Maximum speed: 5920 rpm Engine power S 1 / S 6: 9/5.6 kW Year of manufacture: 2008 Weight: 345 kg Dry pump: Manufacturer: Adixen Type: BF ADP122 Year of manufacture: 2008 Power 1.5 kW Maximum suction capacity: 95 m3/h Maximum continuous inlet pressure: 50 mbar Maximum exhaust pressure: 1200 mbar Cooling water: 60 l/h Speed ​​(pump): 3000-3600 rpm Operating temperature of the pump: from 5 °C to 40 °C Inlet flange: DN 50 ISO-KF Exhaust flange: DN 40

Condition: excellent (used), Kramer SBMM 70 Kramer SBMM 70 beading machine edging machine, slitting machine, roller Dkedora Nw Ijpfx Al Aou Manufacturer: Kramer type: SBMM 70 max. plate thickness: 1.75 Cylinder center distance: 70 mm Maximum working depth: 280 mm Drive power: 1.1 kW Operating speed: 4.5/9 meters/minute constant. Operating speed with stepless drive: 2.5-21 mm shaft diameter Weight: 190 kg ​

Condition: used, Technical details: faceplate diameter: 500 mm width: 100 mm boring diameter: 90 mm Dkodpfxsu Nk Hfe Al Aju total power requirement: - kW weight of the machine ca.: 0,07 t face slide with 4 clamping chucks (clamping travel 60mm) clamping area internal: 145-500mm and external 140-420mm flange intake size= dia. 200mm with clamping bolts equipment: socket wrench *

Condition: used, Technical details: faceplate diameter: 350 mm width: 80 mm boring diameter: 50 mm weight of the machine ca.: 32,0 kg Dkedpfx Aleu Nk T Ss Aeu dimensions: 350x125 mm face slide with 4 internal/outer clamping chucks (clamping travel 80mm) clamping area internal: dia 110-350mm and external dia. 40 -300mm flange intake dia. 130mm *

Condition: used, Technical details: diameter: 400 mm passage: 25 mm width: 58 mm revolution per minute: 1800 U/min weight of the machine approx.: 48 kg Dkodpfju Nlpbjx Al Aeu Power chuck, mechanical Features: Power flange AKS 315/5 Clamping range min./max.: 60/240mm Flange mounting size Ø 300x5mm inside; fastening 3x hexagon socket screws Ø 20mm and 3x holes Ø 20.5mm / pitch circle Ø 235mm Force tension 40kN Guide on one jaw is broken (see picture) *

Condition: used, Technical details: revolution per minute: Motor: 1430 U/min voltage: 380 V / Hz weight: 125 / Gerät kg dimensions: L:680 x B:850 x H:750 mm Dkedpfx Alsu Nww Dj Aeu 2 pieces RADAX high pressure tube fan for dusty air mixture 3-Ph; IE3 06717 external control motor ADDA drive technology, IP55 Ø of the ventlator 650mm 2x flange with 16 holes -hole circle Ø 700mm *

Condition: used, mileage: 9,300 km, power: 346 kW (470.43 HP), first registration: 08/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Like-new and excellently maintained M.A.N. 18-ton TGS flatbed truck with Palfinger PK 14.502 SH crane featuring 6-stage outriggers, a side reach of approximately 17 meters, and a vertical reach of approximately 20 meters, with remote control, 5 + 6 control circuits, a 6.20 m long flatbed, a payload of 6.1 tons, a 470 hp engine, and a wheelbase of 5.50 m, with only 9,300 km on the odometer, auxiliary drive, air suspension on the rear axle, intarder, air conditioning, auxiliary heater, digital mirror replacement system MAN Opti_View, and more. Equipment: 20,500 kg permissible total weight TGS TN long cab with bed and rear window Wheelbase 5,500 mm Euro 6 e engine 4x2 drive Unladen weight 11,860 kg Payload 6,140 kg with 18,000 kg permissible total weight Payload 8,640 kg with 20,500 kg permissible total weight New aluminum flatbed with split side panels and 4-way retractable boarding Flatbed dimensions approx. Length 6.20 m x Width 2.48 m x Height 60 cm Palfinger PK 14.502-SH folding crane, mounted behind the cab The crane has been inspected at a Palfinger workshop Dsdpez Hhk Eefx Al Aeku UVV crane certification valid until October 2026 Max. lifting moment 13.8 mt Only 610 operating hours according to the hour meter PAL com P7 remote control Engine Start/Stop with RPM increase Crane with 6-stage outriggers Rotation servo and grab control Oil cooler 10.5 kW Crane outreach up to 16.80 meters Lifting capacity at approx. 4.20 m / 2,950 kg // 6.20 m / 1,840 kg // 8.20 m / 1,300 kg // 10.30 m / 970 kg // 12.50 m / 780 kg // 14.60 m / 660 kg // 16.80 m / 530 kg 2-point hydraulic stabilizers with pivoting supports Transport position monitoring HPSC additional function 2. ballast Auxiliary drive, gear-dependent, type NH/4c, without flange, f=0.97, position approx. 3:30 Differential lock in rear axle MAN TipMatic 12.26 DD transmission MAN intarder with MAN EVBec, adjustable MAN Idle Speed Driving transmission function MAN freewheeling transmission function Air conditioning, Climatronic Water auxiliary heater, 4 kW Trailer hitch, ring-feder type 400 G 150A with pneumatic connections Permissible total weight of combination 44,000 kg Trailer load 26,470 kg Front axle with leaf suspension and rear axle with air suspension Front axle 9,200 kg, rear axle 13,000 kg Axle ratio i=2.85 Stabilizer for front and rear axle MAN EasyStart hill start assist Full brake assist Emergency brake assist EBA EBS ABS ASR ESP Lane departure warning LDW MAN Attention Guard Reversing warning Cruise control Sun visor Multi-function steering wheel MAN EasyControl control panel, 4 functions operable from the outside when the door is open Glass sunroof, electric Electrically adjustable and heated exterior mirrors Electric windows MAN SmartSelect infotainment control with touchpad and direct access buttons MAN Media System Professional Navigation 12.3 inch MAN Sound System Digital side mirrors Driver comfort seat with air suspension, lumbar support, shoulder adjustment, and heating Seat covers in comfort quality 2 air horns on the roof 2 revolving warning beacons, pre-installed Like-new condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information is without guarantee. Errors and prior sale are reserved. Internal vehicle number: 2475

Condition: good (used), PUMP AND VALVE ASSEMBLY FROM A WOOD TREATMENT AUTOCLAVE For sale, a complete pump assembly originating from an industrial wood treatment plant using an autoclave. Dodjz Hrnbspfx Al Aoku The set was used in a vacuum-pressure wood treatment plant. The assembly includes, among other things: - a large industrial pump with an electric motor, - an additional vertical pump, - process tanks, - an extensive piping system, - flanged valves, - pneumatically controlled valves, - automation and control elements, - sensors and measuring equipment, - a steel support frame. The entire assembly is a component of the technological installation of the autoclave for wood treatment. This type of system is used to carry out the individual stages of the impregnation process, including vacuum creation, transport of the impregnating agent, and the pressure phase. In industrial impregnation plants, separate vacuum pumps, pressure pumps, and circulation/transfer pumps are used. The components bear markings indicating the manufacturers of the individual parts, including Sulzer and Actreg/Actreg Valves. Used, industrial condition. Visible signs of use, wear on the paint coating, and localized surface corrosion. Sold as seen in the photos. Individual components are not sold separately – the offer applies to the entire assembly shown. Inspection is possible on-site before purchase. Due to its size and weight, collection is required or transport must be arranged by the buyer.

Condition: excellent (used), Year of construction: 2013, operating hours: 11,556 h, functionality: fully functional, type of cooling: water, laser power: 500 W, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, LASER welding unit - AL 500 CWS Average power 500 W Emergency stop switch on the resonator CWS laser power supply Pulse peak power 17 kW Dksdpfx Aoz Eu Syol Asu Pulse frequency 0-100 Hz Incl. deflection flange 3 x 400 V, 50-60 Hz, 3 x 32 A ALFlak motion system Travel range (X, Y, Z) 340 × 330 × 370 mm Equipment: Ergokeil 5°-25° Ergonomic wedge for microscope Tilting/swiveling optics AL500 LED-UW HP Focusing objective f=120, ultra-white diode ring light Protective glass swivel joint ALFlak X, Y and Z can be locked independently Eyepiece 16x magnification Rotating axis module ALFlak with chuck ø 125 mm / internal ø 24 mm Tiltable for horizontal to vertical rotation.

Condition: used, mileage: 126,931 km, power: 382 kW (519.37 HP), first registration: 05/2023, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 6x4, wheelbase: 1,400 mm, color: white, driver cabin: other, gearing type: automatic, suspension: steel-air, Year of construction: 2023, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, parking heater, trailer coupling, permissible total weight: 33000 kg, leaf spring air suspension, tipping hydraulics: Meiller, retarder: Ecotarder, digital tachograph, trailer coupling: pintle hitch on end crossmember, Rockinger, on end crossmember frame, fifth wheel coupling: 185 mm mounting height, JOST JSK 37 C 2 inch, maneuvering coupling: Rockinger SK5 on end crossmember, on end crossmember, Rockinger, on end crossmember frame, auxiliary drive: 430 Nm output torque of the gearbox-mounted auxiliary drive, direct pump connection to the gearbox-mounted auxiliary drive, NH/4c without flange f1.14 at approximately 2:30 o'clock, speed ratio approximately f1.15 of the gearbox-mounted auxiliary drive to engine speed, direction of rotation of the gearbox-mounted auxiliary drive like the engine (left), gearbox-mounted for short-term operation of less than 60 minutes, switchable gearbox-mounted auxiliary drive, electronic braking system EBS, brake assistant, Climatronic, auxiliary heater: 3.8 kW, comfort driver's seat, driver's seat with air suspension, armrest for driver, heated driver's seat, headlight range adjustment, MAN Media Truck Advanced, MAN SmartSelect, sound system, multifunction steering wheel, adjustable steering column, lumbar support for driver, anti-lock braking system ABS: Offroad with additional off-road logic, fog lights, heated exterior mirrors, central locking, tinted windows: tinted door windows, tinted laminated windshield, rear differential lock, sun visor: in front of windshield, twin tires: on rear axle, on 2nd rear axle, refrigerator, rotating beacon: rotating warning lights on the driver's cab roof, right and left, LED rotating warning lights yellow (individual LEDs light up in cascade - all around), axle load indicator, work lights, hill start assist: MAN EasyStart, LED daytime running lights, connection plug 1x15-pole, lift roof (manual), cup holder, EfficientRoll, turning light, telematics system: MAN Telematics, smartphone app integration, speed limiter: adjustable driving speed limiter (DSL), limiter (engine control), electronic 89 km/h + 1 km/h tolerance (engine control), anti-spray, trailer brake. Dkedpfx Aljz H Atno Asu

Condition: new, Brinkmann SGL802/1070-MV+313 submersible pump, serial number as shown in the photo, submersion depth: 107 cm, flange diameter: 25 cm, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Dkjdpfx Alsi D Hizs Aju

Condition: used, mileage: 114,290 km, power: 265 kW (360.30 HP), first registration: 08/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, total length: 9,550 mm, total width: 2,550 mm, total height: 3,580 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), * Our internal vehicle number: 1204 MAN TGS 28.360 * Faun Rotopress 518 Terberg Omnideka * Output: 265 kW * Emission standard: Euro 6C * Type: Waste collection vehicle * First registration: 08/2018 * Mileage: Original * From 1st German municipal ownership * Automatic transmission - D/N/R * FAUN Rotopress 518 - Superstructure * Terberg Omnideka - Tipping body * 265 kW / Euro 6C * Reflectors * Rear view camera * Air conditioning system * 6 seats = 2 single seats (driver / passenger) + bench seat for 4 people * Storage box on the outside, on the left-hand side * Digital tachograph Excerpt from chassis number recognition (All information without guarantee): Special equipment: Dkodpfoz E T Tiex Al Asu Exterior mirrors and wide-angle mirrors electrically adjustable and heated, wide-angle mirror with electrically adjustable maneuvering aid, battery 225 Ah, battery disconnect switch mechanical, passenger seat comfort, air-suspended, curb mirror right electrically adjustable and heated, differential lock rear axle, digital axle load indicator for air-suspended axles, pressure sensor for air suspension bellows, ETA circuit breaker, cab: tilting mechanism electro-hydraulic, cab: with air suspension, driver's seat comfort, air-suspended and heated, with lumbar support, remote control central locking, flame starter system, flange coupling auxiliary drive elastically loose, windshield tinted and heated, tilting lever - brake EVBec controlled, automatic climate control, steering wheel with multifunction, air compressor 2-cylinder 720 ccm, air dryer heated, auxiliary heater Eberspächer D4S, auxiliary drive flywheel side, sun visor exterior, sound system, socket cab 12V and 24V, control module for external data exchange, bumper in steel design 3-piece, additional front / fog lights with cornering light Additional equipment: Axle configuration: 6x2, approach / front mirrors, trailer socket 24V / 7-pole, trailer socket ABS, anti-slip control (ASR), audio system: Radio MAN basic Line (Radio / CD), on-board computer MAN-Tronic, electronic braking system MAN-Brakematic, EURO 6 engine, cab: L, lower sleeper bunk with storage space, suspension: leaf / air, power windows, generator 28 V 80 A, transmission 16-speed - Type: ZF 16 S, lift roof mechanical, body / superstructure: chassis, tilting lever - brake EVB, fuel filter heated, fuel tank: combination tank - 400 L diesel + 60 L urea solution (AdBlue), air intake raised, engine 10.5 L - 265 kW diesel, trailing axle NO-08, liftable, spare wheel holder behind rear axle, disc brake rear axle, disc brake front axle, protective device side, side windows rear tinted, sun protection roller for windshield, spray mist reduction, stabilizer on one rear axle, stabilizer front axle, TGS, door windows tinted, underrun protection rear, underrun protection front, viscous fan, front axle VOK-09 arched, central locking, permissible total weight 26.0 t Note: Typographical errors excepted. The customer is obliged to independently verify the condition and equipment of the goods / vehicle! All information without guarantee We reserve the right of prior sale We refer to our general terms and conditions.

Condition: excellent (used), Year of construction: 2008, Table size 600 x 300 mm Max. grinding area 600 x 300 mm Dimensions of the grinding wheel 406 x 50 x 127 mm Min. / max. distance table / spindle center 500 mm Table speed, hydraulically adjustable 5 - 25 m/min. Cross feed 0.1 – 20 mm Cross travel 900 mm/min. Handwheel, cross 1 revolution 5 mm Dkodpeizka Iefx Al Aou 1 division mark 0.02 mm Automatic vertical feed 0.001 - 0.999 mm/cycle Handwheel, vertical 1 revolution 2 mm 1 division mark 0.01 mm With AD 5 (automatic feed) 0.005 mm Grinding motor speeds 1450 / 2900 rpm Grinding motor 1.5 / 3.7 kW Hydraulic pump motor 0.75 kW Drive motor, cross 1.1 kW Drive motor, vertical 1.1 kW Machine dimensions L x W x H approx. 2300 x 1800 x 2100 mm Weight 1700 kg Accessories / Special features: • 2-axis digital display • Automatic vertical feed with spark-out and subsequent retraction • Electro-magnetic clamping table L x W 600 x 300 mm • Manual grinding wheel dressing device • Grinding wheel speed, 2 stages • 1 grinding wheel with flange • Control panel • Lighting • Coolant system with band filter and magnetic separator • Machine feet • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 11-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, 1 brand-new universal milling head system "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mounting: DIN 69871 ISO 50 Overhang: 358 mm Max. speed range: 3000 rpm Max. drive power: 22 kW Mounting flange: Outer diameter: Ø 306 mm Dimensions L x W x H: 460 x 306 x 360 mm Weight: approx. 150 kg Accessories / Special features: • 2 swivel plane system "HURON" • Hydraulic tool clamping Dkedpfxszdbxbs Al Asu • For retrofitting to conventional, NC or CNC milling machines or panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany