Used Flange for sale (1,434)

Condition: used, tank capacity: 10,000 l, GENERAL Design: upright Remarks: Minor differences in construction, e.g., outlets; rectangular opening approx. 600 x 600 mm in the top; various small rust spots on the outside (see photos); 2 vessels with a dent in the cylinder; some connections on the top are bent Internal diameter: 2,200 mm Total height: 3,900 mm Top: flat top Itsdpfx Aexqca Ssffsr Agitator: agitator flange Stand type: feet Location: Bremen Nameplate: Volume: 10,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,750 mm Previous use: detergent production VESSEL Number of feet: 4 pcs FEATURES Outlet: available Note: minor adhesions MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 1 Agitator arrangement: side-mounted on cylinder

Condition: good (used), Rotary hub drive, center turning device -Outer diameter: 315 Itedpfx Afeb A Nf Djfsr -Cone: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 20 kg

Condition: used, max. width of grinding wheel 104 mm Iodpou Sbdyjfx Affetr diameter / bore of grinding wheel 160 mm Flange taper compatible with NZA, AZA, RZ301E etc.

Condition: used, functionality: fully functional, power: 7.5 kW (10.20 HP), protection type (IP code): IP54, VEM KPER 132 SX2 7.5 kW functionally tested Itodpfx Aex H N Dljffer

Condition: excellent (used), functionality: fully functional, grinding wheel diameter: 275 mm, mount diameter: 160 mm, 2 new, unused grinding wheel flanges complete with aluminium spacer washers. Reishauer part no. 211619.00 Itsdpfx Afox Eiycefor For grinding worms Ø275 / 160x160 RZ160 / RZ260. Flange for mounting grinding tools with a bore diameter of 160 mm and a width of up to 160 mm. Dimensions: 300x160x160 mm. All technical details subject to errors/typos. Price on request. Sale exclusively to EU countries.

Condition: new, Year of construction: 2026, MBM series machine • easy start-up in the engine efficiency class • designed for smooth and efficient one-person operation • produce complete profiles in one operation and repeat them exactly at any time • Wear-free and maintenance-free direct eccentric drive Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the pressure beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam Itjdswf Hghepfx Affjr • Motorised rear stop 6-750 mm • foot switch • 16 A connection plug with 5 m cable (within the EU) • connection voltage: 3 x 400 Volt, 50 Hz (within the EU)

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: spray head Design: upright Remarks: Manhole diameter 420 mm; 2 longitudinal sight glasses in the cylinder; outlet fitting (disc valve) incomplete Inner diameter: 1,040 mm Total height: 2,350 mm Agitator: agitator flange Base type: height-adjustable feet Location: Bremen Itjdex Dluxepfx Affsr Volume: 1,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,190 mm TANK Number of feet: 4 pcs EQUIPMENT Manhole / Dome: on the top cover Outlet: 60 mm MATERIAL PROPERTIES Feet material: stainless steel AGITATOR 1 Agitator arrangement: eccentric on top cover

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 300 mm -Reference: Short cone 8 (139.8 mm) -Dimensions: Ø 300 x 100 mm -Weight: 14 kg Itjdpjf Ek Hfjfx Affer

Condition: used, Radial Fan REITZ Type: MAE Serial No.: 601475 Year of manufacture: 2017 Airflow: 4,260 m³/h = 71 m³/min. Pressure p: 1.2 kg/m³ Air inlet: Ø 250 mm (connection diameter in the base plate) Air outlet: 245 x 195 mm Motor speed: 2,915 rpm Motor power: 7.5 kW Power supply: 400 Volt, 50 Hz Itjdjr H Sqyopfx Affjr - Impeller with 9 blades - Directly flange-mounted drive motor - Flange dimensions for air outlet: 310 x 260 mm - Robust metal housing made of 5 and 6 mm steel Space requirement (L x W x H): 1,390 x 1,030 x 600 mm Radial fan weight: 200 kg In excellent condition, only test run.

Condition: used, Year of construction: 2008, Technical details: Ijdpfjvb Drhsx Affstr bore capacity in steel (diameter): 100 mm max. pitch circle: 7000 mm number of spindles: 2 bore spindle turning speed range: 1 - 3000 U/min high speed spindle taper ISO: 50 bore slide stroke: 900 mm feed speeds: 1 - 6000 mm/min max. workpiece weight: 18000 kg total power requirement: 125 kW dimensions of the machine ca.: 13 x 11 x 5,1 m with CNC SIEMENS 840 D Workpiece clamping up to dia. 7000 mm The machine is equipped with 2 drilling spindle supports and through spindle coolant (50 bar)both supports can drill simultaneously. Spindle taper SK 50, 2 stages 1 -600 rpm 1650 Nm and 1 - 3000 rpm. 300 Nm Chip conveyor and coolant device *

Condition: like new (used), max. width of grinding wheel 77 mm diameter / bore of grinding wheel 400 / 56 mm - Klingelnberg grinding disc holder (627.020.006) outer diameter Ø 260 mm / inner diameter Ø 56 mm - incl. grinding disc from Carborundum dilumit Outer diameter Ø 400 see pictures technical drawing Isdpfx Afjxgv Afsfotr

Condition: excellent (used), Chuck flange (28652) for Forkhardt chuck F 315 Short taper size 8 Taper diameter 139.735 mm Itodpfx Ajwy Nf Neffor 4 studs M16 Pitch circle diameter 171.4 mm Outer diameter 300 mm Flange thickness 38 mm Weight 15.5 kg

Condition: used, tank capacity: 2,200 l, GENERAL Itsdpfx Afsx Dluljfsr Equipment: crane lugs Design: vertical Remarks: Manhole diameter approx. 465 mm; cone height approx. 650 mm; discharge fitting no longer available Internal diameter: 1,290 mm Total height: 3,100 mm Agitator: agitator flange Stand type: height-adjustable feet Location: Bremen Volume: 2,200 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,500 mm Last application: foodstuff TANK Bottom: conical bottom Number of feet: 3 pcs EQUIPMENT Manhole / access: top head Note: minor residues Outlet: 70 mm MATERIAL SPECIFICATION Leg material: stainless steel AGITATOR 1 Agitator arrangement: eccentric in top head

Condition: good (used), Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: SNGB-160 TN34547 -Quantity: 2 pieces available -Price: per piece -Weight: 3.3 kg/piece Isdpfxsb A Nv Ss Affstr

Condition: used, Centrifugal fan REITZ type MAE Serial no. 601438 Year of construction 2017 Volume flow 10200 m³/h = 170 m³/min. Pressure p 1.2 kg/m³ Air inlet Ø 300 mm (nozzle diameter in the base plate) Air outlet 345 x 345 mm Motor speed 2940 rpm Motor power 18.5 kW Mains connection 400 Volt 50 Hz - Fan wheel with 8 fan blades - Directly flanged drive motor - Flange dimensions for air outlet 450 x 450 mm - Sturdy metal housing made of 8 mm steel Itedpfxor H Sqvs Affjr Space requirement L x W x H 1930 x 1240 x 950 mm Weight centrifugal fan 500 kg very good condition, only test run completed

Condition: used, tank capacity: 318 l, GENERAL INFORMATION Design: vertical Remarks: Radii of the heating coil inside the tank (see photos); handhole diameter approx. 300 mm Outer diameter: 880 mm Inner diameter: 740 mm Total height: 1,550 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 143 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: agitator flange Base type: feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 318 litres Double jacket volume: 21.0 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: cosmetics TANK Max. permissible operating temperature: 143 °C Itodex Dlnfepfx Affsr Number of feet: 3 pcs HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: handhole Outlet: 38 mm MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) Feet material: stainless steel AGITATOR 1 Agitator arrangement: eccentric on the top head

Condition: excellent (used), Butterfly valve, flap valve, ball valve, butterfly valve, gate valve, diaphragm valve, diaphragm shut-off valve, flanged shut-off valve -Manufacturer: KSB, gate valve type BOA-W -Connection: DN 50 PN 6 -Number: 3x valve available -Price: per piece -Dimensions: 230/140/H260 mm -Weight: 8.6 kg/piece Ijdjrp Ikropfx Affotr

Condition: used, tank capacity: 1,813 l, GENERAL Design: upright Internal diameter: 1,195 mm Total height: 2,600 mm Max. overpressure: 1.0 bar Agitator: agitator flange Type of support: feet Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 1,813 liters Wall thickness, cylinder: 4.2 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,260 mm Previous application: chemical industry TANK Max. operating temperature / °C: 100 °C Ijdoxqdrvjpfx Affetr Number of feet: 4 pcs EQUIPMENT Manhole / dome: in the top head Outlet: available Remark: minor adhesions MATERIAL SPECIFICATION Feet material: steel AGITATOR Baffle: Agitator positioning: eccentric in the top head TECHNICAL DATA / DIMENSIONS Wall thickness, heads: 4.7 mm

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate Iedpjxrlfgjfx Affstr -Outside: Ø 130 mm -Bolt circle: Ø 75 mm -Hole: short cone 3, cone Ø 51 - 53 mm -Dimensions total Ø 130 x 50 mm -Weight: 1.4 kg

Condition: used, GENERAL Miscellaneous: - Agitator flange DN 150 / 168.3 DIN 2633 PN 16 - Mounting flange DN 250 Itjdpfjxqbznsx Affer Location: Bremen Product-contact material: V4A 1.4571 (AISI316) Condition: used

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 200 mm Itsdpfxexrk T Nj Affsr -Bolt circle: Ø134 mm -Hole: short cone 6, cone Ø 101 - 106 mm -Dimensions total Ø 200 x 145 mm -Weight: 7.6 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 160 mm -Hole: Short cone 4, cone Ø 60 - 63 mm -Bolt circle: Ø 85 mm -Dimensions: Ø 160 x 70 mm Iedpfxjxdh I Ij Affotr -Weight: 2.6 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate Itodpfx Afoxdhvlefer -Outside: Ø 225 mm -Mounting: cone Ø100-102 mm -Bolt circle: Ø 140 mm -Dimensions: Ø 225 x 165 mm -Weight: 8.1 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 260 mm Itodpfexdhu Isx Affjr -Adapter: short cone size 6 (Ø103-105 mm) -Bolt circle: Ø 133 mm -Dimensions: Ø 260 x 140 mm -Weight: 11.2 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange Iedswc Rvzepfx Affjtr -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 250 mm -Adapter: short cone size 8 (Ø135-139 mm) -Bolt circle: Ø 170 mm -Dimensions: Ø 250 x 175 mm -Weight: 14.1 kg