Used Disk Hacking for sale (595)

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Dcedpfxoz Dvfxs Ailjn Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, saw blade length: 2,825 mm, cutting height (max.): 230 mm, cutting range round steel at 90°: 230 mm, Well-maintained machine in good condition. Dcjdpfx Ajz I U Dneilon

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kawasaki RS05L robot with E-Controller and enclosure Control system: E-Controller Number of axes: 6 Dsdpez I R D Dofx Ailscn Max. payload: 5 kg Max. working range: 902 mm Year of manufacture: 12/2012 Scope of delivery: Robot, control system, cables, teach panel, circuit diagrams, floppy disk drive for data backup. Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city, and postal code. Freight costs available upon request – please specify the delivery address.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, Disc grinding machine with magnetic clamping plate, 1500mm x 300mm. Dcsdpfxoz Dumns Ailen The grinding machine was in operation until we dismantled it. The company was dissolved due to the owner's retirement. The senior manager was always very satisfied with this grinding machine and even bought the same model again! Includes coolant system. Loading onto a truck is possible with a crane or forklift and is free of charge.

Condition: used, Year of construction: 1966, functionality: unexamined, KASTO EBS 320 A – the machine was not used very often. Dsdsz Hxtwspfx Ailjcn Electro-hydraulic high-performance automatic bandsaw Machine specifications: Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: EBS 320 A Machine type: Electro-hydraulic high-performance automatic bandsaw Document version: Wiring diagram dated 12/1963; Year of manufacture: xxxx Functions and components Sawing unit: Saw frame with guide unit Workpiece clamping: Clamping device / machine vise Material feed: Feed stand with feed slide and feed drive: Hydraulics / Drive: Gearbox Cooling system: Coolant system with submersible centrifugal pump and coolant line Operation / Electrical system: Control panel, switch panel and control cabinet Additional components: Multi-clamp device, material support Price basis: Net price plus (shipping costs on request) The bandsaw is located in the Frankfurt area.

Condition: used, Year of construction: 1966, functionality: limited functionality, saw blade length: 450 mm, Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: UBS 240 A Machine type: Automatic bandsaw Saw blade dimensions: 450 × 40 × 2 mm Mounting holes: Ø 8.5 mm Coolant: Tank capacity approx. 40 l emulsion Cutting pressure: Adjustable via setting screw Workpiece clamping: Machine and feed vice Operating modes: Single cut and automatic operation with quantity preselection Dodsz Hxu Iepfx Ailocn

Condition: like new (used), Year of construction: 2020, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 1,000 kg, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 25,000 W, spindle nose: HSK 63A, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, KEY FEATURES: table dimensions 1200 × 600 mm table load 1,200 kg axis travels X 1,050, Y 600, Z 600 mm HEIDENHAIN i-TNC 530 CNC (color LCD screen), advanced conversational programming high-speed package RS 232 serial port, USB slot, RJ 45 Ethernet network port and hard disk Rapid traverse rates 40 m/min on all axes Working feed rates up to 20 m/min Cooled ball screws weight 7,000 kg HSK 63A electrospindle, 20,000 rpm, 25 kW, chiller-cooled remote handwheel RENISHAW tool control laser 30-position random tool changer standard equipment tool holder set (at least 10 pieces) integrated fume extractor high-pressure coolant through the spindle coolant tanks with pumps, chip conveyor operation, maintenance and programming manuals, electrical diagrams CNC manuals Dcedpfx Aijz D Alleljn CE certificate leveling feet

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 380 V, input current: 14 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 300 mm, cutting width (max.): 300 mm, total height: 1,750 mm, total length: 2,420 mm, total width: 2,200 mm, overall weight: 2,400 kg, table height: 750 mm, Equipment: CE marking, documentation/manual, For sale: MEBER SM300 automatic band saw. Minimum cut length in semi-automatic mode: 20 mm. Minimum cut length in automatic mode: 90 mm. The machine comes with all original documentation (manuals, certificate of conformity, CE marking), as well as a sworn expert report prepared by a certified expert. Dedpfx Aoz Ikvaoilecn Collection and transportation are the responsibility of the buyer, but I am willing to assist with loading the machine.

Condition: used, Year of construction: 1998, Used KASTO HBA 360/600 U horizontal band saw for sale Condition: good, used Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: HBA 360/600 U Year of manufacture: 1998 Robust, industrial-grade KASTO horizontal band saw designed for cutting metal stock. The machine is sold with a roller conveyor and a new Kyocera cutting blade. Dedez Hixdepfx Ailjcn Technical specifications Max. cutting diameter for round stock: approx. Ø 360 mm Max. cutting dimensions for rectangular stock: approx. 360 × 600 mm Weight: approx. 1800 kg Power supply: 400 V / 50 Hz / 3 phases Power according to machine data plate: 10 kW Rated current: 35 A Included accessories Roller conveyor New Kyocera cutting blade Additional information The saw is in good technical condition. There is a minor issue: sometimes the workpiece clamping function needs to be activated a second time for the clamps to properly secure the material. The machine is currently disconnected and ready for transport. The seller can assist with loading the machine onto a truck, but does not assume responsibility for any damage that may occur during loading. The machine is sold as is, without any warranty. If you have any further questions or require additional information, please do not hesitate to ask. Text or technical data may contain errors. The buyer must verify the technical data and specifications before purchasing the machine.

Condition: good (used), functionality: fully functional, Hydraulic hacksaw for Round: 350 mm Dcsdpfx Aiez Irqfjljn Saw blade length: 550 mm Power: 2.8 kW 6 stroke rates approx.: 36 / 45 / 58 / 72 / 90 / 116 strokes/min Cutting speed approx.: 11 / 13 / 17 / 22 / 36 / 34 m/min Cutting area flat approx.: 350 x 200 mm

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Working area Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Dsdpox Ap A Rjfx Ailscn Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 05/2016, loading space length: 13,620 mm, loading space width: 2,470 mm, loading space height: 2,690 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,730 mm, color: grey, Year of construction: 2016, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Schmitz Brakes: disc brakes Suspension: air suspension Dcedpfx Aioz I En Dslsn Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Weights Empty weight: 6.701 kg Carrying capacity: 23.299 kg GVW: 30.000 kg Functional Make of bodywork: Schmitz CargoBull FerroPlast Box Maintenance APK (MOT): tested until 12/2026 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, punching force: 22 t, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Punching force: 220 kN Sheet metal thickness: 8 mm Sheet metal thickness for stainless steel: 4–6 mm Working area: 2,535 × 1,280 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Number of stations: 18 Number of clamping jaws: 3 Number of tool cassettes: 4 pcs Part chute for parts up to: 500 × 500 mm MACHINE DETAILS TFT color screen: 10.4" Floppy disk drive: 3.5" EQUIPMENT Rotatable tool holder Automatic repositioning system with pressure plate Automatic tool changer with 18 stations Dcodpfxoz Izque Ailon 3 clamping jaws Programmable part chute for parts up to 500 × 500 mm Programmable pressure plate with pre-selectable clamping force Good parts container Tool spray lubrication 2nd lubricant tank Punch scrap extraction Chip bin Quick shut-off for hydraulics Order table TFT color screen 10.4" 3.5" floppy disk drive Graphic programming ToPs 2000 RJ45 network connection 2-beam safety light curtain Network connection including installation Multitool control Repositioning cylinder 4 tool cassettes

Condition: used, Year of construction: 2006, operating hours: 10,000 h, functionality: fully functional, The used KONDIA HM-1060 high-speed vertical machining center is a medium-sized, numerically controlled machine with a cast iron gantry structure, weighing approximately 7,300 kg. It has travels of X 1,000, Y 600, Z 510 mm, a table size of 1120 × 600 mm, and a load capacity of 660 kg, with rapid traverse rates up to 24 m/min. It features a cast iron structure with support on 3 points for improved thermal compensation, a SELCA 4045 CNC control with a color LCD, a network interface, a hard disk, and a BT-40 spindle at 10,000 rpm, cooled by a dedicated chiller. It also includes an 18-position pick-up tool changer, a remote handwheel, and a conveyor chip evacuator. Year of manufacture: 2006, complete with manuals and certification. Dsdpfxez I Dvao Ailecn

Condition: used, Year of construction: 2009, operating hours: 7,860 h, functionality: fully functional, total length: 2,160 mm, total width: 1,110 mm, total height: 1,600 mm, overall weight: 2,600 kg, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, We offer this used Officine Monzesi Monza 410, manufactured in 2009. MONZESI Monza 410 CNC 1 centerless grinder High-precision machine in excellent working condition, available for inspection under power. Ideal for high-volume precision grinding (automotive, medical, aerospace, or micro-technical components). The original configuration of this machine made it possible to perform micrometer-precision machining of highly sensitive parts (sapphire disks). 🛠️ Key Technical Specifications • Workpiece capacity (external diameter): From 3 to 100 mm. • Maximum plunging/traverse length: 200 mm • Grinding wheel: Max. external Ø 406 mm | Max. standard width 200 mm | Motor power 15 kW (1560 rpm). • Drive wheel: Max. external Ø 254 mm | Max. standard width 200 mm | Brushless servomotor 3.9 kW, variable speed (5 to 285 rpm). • X-axis (Slide Feed): Satellite roller screw (Ø 32 mm, pitch 5 mm) driven by a 6 Nm digital servomotor with a direct optical scale for absolute micrometer precision (programmable minimum increment of 0.0005 mm). 💻 Numerical Control & Automation • CNC: FANUC Power Mate iD digital with Fanuc motors and actuators. • Operator interface: Color touchscreen with graphical pages designed for quick and easy operation. Dodpsz Ernljfx Ailscn • Electronic precision: Programmable minimum increment of 0.0001 mm. • CNC advantages: Absolute encoders (pulse coders) eliminating the need for referencing at start-up, statistical management of the X-axis with programmable automatic compensation for grinding wheel wear. 📦 Included Accessories and Peripherals The machine is sold with its original equipment and essential workshop accessories: • Oil mist extraction: AR FILTRAZIONI model ARNO 1 VF system (max. flow rate 1500 m³/h) for pollution control in the work area. • Mechanical equipment: Blade holder for in-line operation, grinding wheel holder (Ø 203 mm), drive wheel holder, and static balancing devices and pivots for the grinding wheels. • Safety & Ergonomics: Full sliding protective enclosure compliant with CE standards, secured by automatic locking during wheel rotation, and equipped with internal lighting. • Complete original documentation: Installation, operation, and maintenance manuals, parts catalog, and complete electrical/hydraulic/pneumatic diagrams. (Note: Machine sold without its original fabric filter unit). 📝 Sales Terms & Logistics • Year of manufacture: 2008. • Condition: Very good condition, regular geometric cycles. • Inspection: Machine available for inspection in working condition and under power for testing. • Removal: Lifting, handling, loading onto a truck, and transportation are the sole responsibility of the buyer. (Provide lifting equipment suitable for the weight of the machine base: 2,600 kg excluding the electrical cabinet). • Price: CHF 30,000 (excluding VAT). Manufacturer: Officine Monzesi Model: Monza 410 Year of manufacture: 2009 Condition: Used Category ID: 26 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, This listing is for a Qiagen Rotor-Disk Heat Sealer The Rotor-Disc Heat Sealer is used to seal Rotor-Discs for the Rotor-Gene Q. Rotor-Discs do not use caps. Instead, Rotor-Disc Heat Sealing Film is applied and sealed using the Rotor-Disc Heat Sealer. The film prevents contamination by providing a strong, durable, and tamper-proof seal. Dcedpfx Aisxzhkqoljn

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travels: 1,200 x 800 mm U and V axis travels: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.30 mm Simultaneously controlled axes: 4 (X, Y, U, V) Motors: AC on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg FILTRATION UNIT Tank capacity: 3,000 liters Conductivity control system: Automatic Resin capacity: 14 liters Temperature control: Automatic Dielectric cooling system: Chiller GENERATOR Power circuits: AC MOSFET Minimum surface roughness: Ra 0.35 µm Cutting speed: 360 mm²/min (brass wire Ø 0.30 mm) Automatic wire threading: Standard Power supply: 400V, three-phase CNC CONTROL Hardware: 64-bit industrial PC Memory: 1 GB Screen: 15” TFT touchscreen Data input: Keyboard, RS232, floppy disk, LAN, USB Positioning system: Closed-loop servo-controlled Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm MACHINE EQUIPPED WITH: Optical scales on X and Y axes 600 mm Z axis Wire spool holder for coils up to 50 kg No. 1 set of 0.25 mm guides No. 1 set of 0.30 mm guides Taper cutting system Automatic wire threading and re-threading after breakage Dcjdpfx Ajxwmacsilon Clamping system: frame with universal drilling pattern 64-bit CNC control with 16 GB memory AC power generator with anti-electrolysis device Automatic technology generation Serial interface, floppy drive, LAN, USB Dielectric unit with automatic demineralization system Chiller Year of manufacture: 2018

Condition: used, Year of construction: 1985, cutting diameter 200 mm band length . mm stroke . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Dodpfxjz Icx Ho Ailscn More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2011, machine/vehicle number: E1053A0497, overall weight: 850 kg, For sale is a TRUMPF TruDisk 4002 (4C) disc laser / laser source, including a separate KLH cooling unit RW 20/0 SK. Dcedpjzvqfyofx Ailjn Laser technical data: * Manufacturer: TRUMPF Laser GmbH + Co. KG * Type: TruDisk 4002 (4C) * Year of manufacture: 01/2011 * Laser power: 4,000 W * Equipment No.: E1053A0497 * Supply voltage: 380 V (-10%) to 460 V (+10%), 3 AC + PE * Frequency: 50–60 Hz * Connection power: 23 kW / 25 kVA * Rated current: 34 A at 400 V * Protection class: IP54 * Weight: approx. 850 kg Cooling unit: * Manufacturer: KLH Kältetechnik GmbH * Type: RW 20/0 SK * Year of manufacture: 2017 * Part No.: E123223000AA * Serial number: 17KLH00670 * Voltage: 400/460 V * Frequency: 50/60 Hz * Refrigerant: R134a * Refrigerant quantity: 3.7 kg The TruDisk 4002 is offered together with the KLH cooling unit shown in the picture. Inspection is possible by arrangement. Further technical information and images can be provided upon request.

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Integral guarding designed for quick blade change. Dcsdorfw Ikepfx Ailen Blade disc Ø 350 mm. Cutting capacity: Round tubes 0°: 102mm 45° right: 102mm Square tubes 0°: 85mm 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2001, loading space length: 13,490 mm, loading space width: 2,540 mm, loading space height: 2,640 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 3,950 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,110 mm, color: white, Year of construction: 2001, Equipment: tail-lift, Axle configuration Dcsdpjz Hu I Rofx Ailon Tyre size: 385 / 65 / R22.5 Make axles: Mercedes-Benz Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Weights Empty weight: 8.800 kg Carrying capacity: 30.200 kg GVW: 39.000 kg Functional Tail lift: AMA Stama 20 UF, slider lift, 2000 kg Make of bodywork: Pacton Plywood Box History Number of owners: 1 Condition General condition: moderate Technical condition: moderate Visual appearance: moderate Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, Year of construction: 1975, Product information "Kasto EBS 320 U bandsaw" Djdpfxjzily Sj Ailjcn Kasto EBS 320 U bandsaw Condition: Used Year of manufacture: 1975 Technical data: Cutting diameter: 320 mm Cutting range: 90° square: 320 x 320 mm 45° square: 180 x 180 mm 45° round: 180 mm Vice opening width: 320 mm Cutting speeds: 37 - 102, 4 stages Saw blade length: 575 x 50 x 2.5 mm Motor power: 4.5 kW Dimensions (W x D x H), approx.: 1670 x 750 x 1500 (bow above) Weight, approx.: 700 kg Equipment: - Coolant system with pump - 2 saw blades - Machine feet Inquiry item: Transportation costs will be provided in a separate offer.

Year of construction: 1992, condition: excellent (used), Lathe/ grinder brake disks Type: BTD4/2 Dcjdpfx Ashtnv Hsilon Year: 1992 Voltage: 3x380V-50 Hz. Machine equipped with: - turning and grinding equipment

Condition: excellent (used), 2 knives Knife width: 35 cm Dcodox Tf E Espfx Ailsn Drum diameter: 125 cm Drum width: 25/7 cm Maximum material height: 13 cm Maximum material width: 33 cm Outlet: 25 cm Motor: 45 kW Transport width: 200 cm, height: 150 cm, length: 280 cm

Condition: used, Year of construction: 2002, SECOND-HAND DOUBLE DISK SANDER LANDONIO MOD. LV 800 - CE RULES Dcjdpowrm R Hsfx Ailon - Year 2002