Used Short Taper Flange for sale (8,748)

Condition: excellent (used), Year of construction: 1997, Splash guard Diameter 400 mm Dksdsd Tyu Sepfx Al Aju Height 100 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Dodpozx Rz Hjfx Al Aoku Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Dsdpfx Ajw Uf Hwjl Ajku Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: excellent (used), Year of construction: 2012, Soco Case / Carton / Box Taper Fully Stainless Steel Top and Bottom Tape Heads (removable) Dodsw Rr Dhjpfx Al Aeku Mobile on lockable castors Manual side drive adjustment Manual top head adjustment Tape sizes 28mm to 48mm In excellent condition

Condition: excellent (used), Soco Case Sealer / Box Taper In excellent condition Top and bottom tape heads Manual side drives adjustment Manual top head adjustment Three phase power Mobile on lockable castors Dkjdpfx Alezzl N Rj Asu

Condition: good (used), Year of construction: 2016, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, – Capacity: 4 mm – Hydraulic roller adjustment – Foot pedal operation – Infinitely adjustable speed – Emergency stop – Documentation – 400V Dksdez Ha Amjpfx Al Aju

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 315 mm -Adapter: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening Dodpfx Aot Sz Evjl Aeku -Bolt circle: Ø 135 mm -Dimensions: Ø 350 x 90 mm -Weight: 19 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate Dkjdpfxewcdw Es Al Aou -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Type: 8230-160/5 -Outside: Ø 160 mm -Bolt circle: Ø105 mm -Mounting: Short taper 5, cone Ø 79 - 82 mm -Dimensions total Ø 160 x 65 mm -Weight: 2.2 kg

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,5 EW20° 3GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance Djdpfjuayy Tsx Al Aoku - Significantly higher sanding parameters than with standard tools

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 217 mm -Short taper: 6 -Number: 1x discs available -Price: per piece -Weight: 7.2 kg Dkedpfx Aochyyfol Aju

Condition: used, chuck flange, flange holder, lathe chuck flange, driving flange, lathe chuck faceplate -Manufacturer: Röhm, chuck flange for three-jaw chuck, four-jaw chuck, faceplate -Type: 55021/22-6 Ø 220 mm -Bolt circle: Ø 134 mm -Hole: Short taper 6, cone Ø 103 - 106 mm -Dimensions total Ø 220 x 190 mm Djdpfstigxqox Al Aeku -Weight: 20.1 kg

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, throat depth: 2,700 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, overall weight: 2,120 kg, total width: 1,200 mm, total length: 4,500 mm, total height: 2,000 mm, space requirement height: 2,300 mm, space requirement length: 4,800 mm, input voltage: 400 V, workpiece weight (max.): 2,000 kg, Refurbished Pullmax Kumla F13C edge rolling,flanging machine in excellent condition for sale. Dkjdpoy Tni Tefx Al Aeu Can edge roll, flange dished ends from mild steel sheets up to 13 mm thick and stainless steel sheets up to 10 mm thick!

Condition: good (used), Flange mount, drive flange -Feed flange with: drive bolt Dedpfx Aedvdvwel Asku -Outer diameter: Ø 300 mm -Short taper mount for: bayonet disc attachment, taper size 6, -Bolt circle: Ø 133.4 mm -Quantity: 1x disc available -Weight: 20 kg

Condition: good (used), Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: Ø 250 mm -Short taper mount for: bayonet disc mounting, taper size 8, bolt circle Ø 171.4 mm -Weight: 17 kg Dkjdpfxsdvdvye Al Aeu

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange Dkedjf R Iw Ajpfx Al Aou -Chuck flange: for three-jaw chuck, four-jaw chuck -Outside: Ø 280 mm -Inside: Ø 105 mm -Mounting: Short taper 8 (139.7 mm) -Weight: 13 kg

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 14-250 001, workpiece diameter (max.): 80 mm, Title: Short Bar Loading Magazine FMB SL 80 S – Year of Manufacture 2004 – including accessories & forklift loading Description: Due to a change in our production processes, we are selling our FMB SL 80 S short bar loading magazine. The machine has operated reliably in our production up until now and is no longer needed due to the changeover. •Manufacturer: FMB •Model: SL 80 S •Year of Manufacture: 2004 •Bar Diameter: 10 – 80 mm •Condition: Used Scope of Supply & Accessories: •Connection cable to the lathe (interface) is directly attached to the machine. •4 different sliding bars / feed bars for different material diameters are included. Loading & Logistics: •A forklift is available on site. Dedpfx Aoz Eh Unol Asku •We will assist with loading onto your truck or the shipping company’s vehicle free of charge. Terms of Sale: The sale is exclusively to commercial customers (B2B) and is subject to the exclusion of any warranty and liability for defects. A proper invoice with VAT will be issued.

Condition: good (used), Year of construction: 1975, overall weight: 6,000 kg, total width: 1,800 mm, total length: 5,000 mm, total height: 2,900 mm, sheet thickness (max.): 12 mm, Flanging and dishing machine Schleiffstein - KbOL 3012 Tank Head Manufacturing  Dishing and Flanging machine up to 12 mm in 260 Nm/mm2 Forming roll optional for sale Radius 50 / 70 / 100 / 150 / 200 / 250 / 300 Fully hydraulic machine Field off aplication heads, bottoms for vessel, tanks, beverage manufacturing tanks, beer tanks Torispherical heads Dkedpfjzz Ipgox Al Aou Ellipsoidal heads Spherical bottoms Dished bottem tank construction Flat bottems Sperical dished bottoms Cones     Max. workpiece: 6500Ø Maximum sheet thickness: 12mm Max. dishing radius: 300mm Min. product Ø: 300 Min. plate thickness: 2mm Min. dishing radius: 50mm Max height on dishing side:350mm Working speed: 0 - 5000mm/min. Power: 20kW Length: 5000mm Width: 1800mm Height: 2900mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange Dsdpfxedpyzwo Al Aeku -Chuck flange for: drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: O 355 mm -Short taper: size 8 (139.7 mm) -Number: 1x discs available -Price per piece -Dimensions: O 355 / H175 mm -Weight: 38 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 210 mm -Short taper: 5 (82.5 mm) -Number: 2x discs available -Price: per piece Dedpfxjdfavpo Al Aoku -Weight: 5 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange Djdpfx Aochyygol Asku -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 305 mm -Short taper: 8 -Number: 1x discs available -Price: per piece -Weight: 15.3 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange Dsdpfx Alochyyie Aoku -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 230 mm -Short taper: 102 mm -Number: 3x discs available -Price: per piece -Weight: 9.7 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 207 mm -Short taper: 6 Dkjdpfx Alschyykj Aju -Number: 1x discs available -Price: per piece -Weight: 6.8 kg

Condition: used, Flange mounting, driving flange -Chuck flange with: driving pin Dedpfjdvdvqex Al Ajku -Outer: Ø 300 mm -Short taper mount for: bayonet disc mounting, cone size 8, bolt circle Ø 171.4 mm -Weight: 30 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chucks, four-jaw chucks, face plates -Outer diameter: 330 mm Dsdpofh Smxjfx Al Aeku -Interior diameter: 100 mm -Short taper: size 6 (106.3 mm) -Rezess: O 252 mm -Hole circle: O 171 / O 18 mm -Dimension: O 330 / H35 mm -Weight: 16 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Automatic edge banding machine Dsdpjz Evg Eofx Al Aeku Information available upon request.