Used Fireplace Template for sale (131)

Condition: used, machine/vehicle number: 16072, Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40 Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Ledpeh Axk Isfx Affsta Heidelberg Quickmaster 46, d. h. zwei U-förmige Löcher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querformat / Long/landscape format: 311 x 434mm 64 %, Lang/Querformat: Long/landscape format:287 x 370mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, functionality: fully functional, load capacity: 170 kg, ERGO stair climber ZW7170GC-SET with extra-large loading shovel The electric stair climber is an ideal device for transporting all types of goods over terrain and stairs. This means that even bulky goods such as refrigerators, fireplaces, carpet rolls or copiers can be transported without any problem. The climbing speed of the electric stair climber can be continuously adjusted in two stages (17/34 steps / min). Safety brakes stop automatically at the edge of the stairs. This means that corrections on the stairs can be made at any time. Your advantages Load capacity 170 kg Electric motor Fast-plug lithium-ion battery with charge level indicator and quick-charge function Fully foldable frame to reduce space requirements to a minimum High-strength, corrosion-protected aluminum frame Automatic brake for safe transport on the stairs Adjustable handle Sealed design, dust and splash-proof according to IP54 Solid rubber tires Design The ascent and descent mechanism always grips the edge of the step far enough, which prevents slipping and damage The digital charge level indicator gives you an overview of the system's remaining performance at all times Suitable for Copiers Ltsdpfjv Ilfvjx Affea Machines Vending machines Refrigerators Fireplaces and much more Scope of delivery One battery pack as standard One strap for securing the load One automatic battery charger Incl. extra-large loading shovel

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 501 PVC KOL YERİ DELME KANAL AÇMA SU TAHLİYE MAKİNESİ, - Complies with CE standards. - Possibility of opening locking places, hinge slots, handle holes and water drainage channels of PVC profiles. - Ability of copy head to work on vertical axis - Horizontal axis operation of the triple drilling system - Ability of the water drainage system to operate in angled position - Possibility to make universal template optional template - Possibility to operate triple drilling copy milling cutter or grooving system as one - Comfortable working thanks to the powerful motor Ltodpfx Aforamz Aofsa - Right conveyor system (1 meter)

Condition: new, Year of construction: 2025, total width: 10,000 mm, total height: 2,700 mm, working range: 2,500 mm, total length: 10,000 mm, compressed air connection: 10 bar, type of input current: three-phase, warranty duration: 12 months, overall weight: 4 kg, input current: 18 A, working width: 1,700 mm, working height: 180 mm, feed length X-axis: 2,500 mm, feed length Y-axis: 1,700 mm, power: 11 kW (14.96 HP), 1 Operator pallet production equipment is designed to produce standard and non-standard pallets up to 2500 mm long. The boards are loaded into the pallet template manually. Pallets are easily programmed and saved in the Windows operating system. Automatic pallet unloading make the operator's work easier, there is no need to unload pallets manually. Ltedowm Ihcspfx Affsa After setting the number of pallets to be loaded, the ABB Robot will unload the pallets automatically. Installation capacity per 1 shift: 300 – 500 pallets.

Condition: new, Year of construction: 2025, functionality: fully functional, The AT-3000 is an advanced automatic pallet nailer designed for maximum efficiency and intuitive operation. It offers the flexibility to produce different types of pallets on a single machine by simply changing the template. Ltjdpfxjwq Izwe Affoa

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) Ledpfev Iflpex Affjta • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels Lsdpfsq H Sqdjx Affjta externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,600 mm, total length: 3,100 mm, total height: 1,600 mm, overall weight: 750 kg, type of input current: three-phase, input current: 12 A, pressing force: 9 t, input frequency: 50 Hz, operating temperature: 200 °C, input voltage: 400 V, The machine is designed for vacuum forming of various elements of thermoplastic plates such as: PP, PET, PS, HIPS, EPS, PLA, PVC, PMMA, KYDEX. Technical dat Ledpfxjiimw Ae Affjta Working area dimension: 800×600 mm The dimension of the plate sheet: 860×660 mm Working table stroke: 290mm Thermoformed board thickness: 0,2 to 2 mm only the upper inrun heating Thermoformed board thickness: 3 to 5 mm additionaly lower inrun heating Power supply for the electric installation: 400V Heating power: *Upper inrun heating -12 kW *Lower inrun heating - 12 kW *Lower heating heating to maintain the temperature of the template - 2.4 kW Vacuum pump performance: 40 m3 oil Pressure in the chamber: ok.0,95-0,98 kg/cm2 Dimensions: width x depth x height: 1500 x 1600 x 1800 mm Weight: 600 kg Optionally, the machine can be configured according to the customer’s wishes: -increasing the dimensions of the working area, -demonstrative temperature measurement of the dome and material, -pneumatic clamp of frame -material cooling, -mobile control panel, -adaptation to work with a roll of foil, -reduction frame narrowing the working area. We produce vacuum machines. Chceck our vebsite for more. We ship worldwide.

Year of construction: 2019, condition: new, GOMA GS-900 Router Manufacturer GOMA Model / type of the GS-900 machine Production year 2019 Machine category Router Location Gorzów Wlkp. Conditions of delivery OWN COLLECTION Cost of delivery Customer cover Startup Type to be agreed Description Comments Value Data Spindle speed 9000 - 18000 rpm Two-speed engine 3.2 / 2.4 kW Head rotation +/- 45 ° Vertical table travel 150 mm Table dimensions 700 x 800; (700 x 1200) mm The GS-900 router is intended for processing solid wood and wood-based materials, i.e. chipboard, MDF, etc. Characteristic: - processing of solid wood and chipboard, - milling of grooves in plates, edge profiling according to a curvilinear route or a straight line, - remote control for working with templates extended from the table, - double bearings allow you to use the full engine power, - pneumatic smooth lowering of the spindle controlled by a pedal, - spindle tilt in the range of +/- 45 degrees. Machining of very short, very long, complex curved edges or other unusual work requires the use of special equipment necessary for safety reasons. This tooling must sufficiently cover the tool and guarantee reliable material guidance to prevent kickback or kicking. The headstock is tilted sideways manually; the vertical position is determined by the removable pin. In the table, coaxially with the tool, there is a retractable pin D = 10 mm. After extending and installing the bearing, it provides guidance for the template with the workpiece. Clamps that can be purchased at Lignum can be used to attach the item. The tool is mounted directly in the spindle. Combined with reinforced bearings, this allows high feed rates. ATTENTION!!! The purchase of tools lies with the buyer. Spindle lock yes Table Length 1200 Spindle length mm 700 Number of heads piece 1 Number of engines pcs. 1 Number of pistons pcs. 1 Number of Spindles pcs. 1 Maximum Working Length mm 2500mm Maximum Working Width mm 1200 Maximum cutting height mm 150mm The machine has CE marking yes Engine power kW 3.2 / 2.4 kW Supply voltage V 380 New machine yes Spindle speed rpm 9000/18000 Security Guards yes Full Operation and Maintenance Documentation yes Extraction connection mm yes 70 mm Table working surface mm x mm 1200x800 Noise Level Db 50 db Manual adjustment yes Very Good Condition yes Machine weight kg 500 Lsdpjfbl Epsfx Affjta Capacity m3 / h 1800 m3 / h Machining height mm 150 mm With noise suppression housing yes Other machines in the category Routers

Condition: new, Year of construction: 2025, Heavy duty manual guillotine shear for trade and industry. With the manual guillotine shear GLT you can make the perfect cut with every job. the extending table makes it easier to guide large-sized metal sheets on the table Support table with graduation robust and compact steel construction Ltsdpfxocl D Hlj Affea high quality, durable steel knife extremely stable and heavy construction made of cast iron ground and hardened guillotine shears Back gauge system with Scala CE mark Declaration of conformity stable and robust construction for steel plates up to 1.2mm Working length 2050mm open design suitable for endless cuts large cast work table Lower storage compartment for storing sheet metal pieces in the price Dimensions: Length: 2500mm Width: 750mm Height: 1150mm Weight: approx. 500 kg Passage: 8cm Price: 4650 euros marking template free! Delivery date: every week Contact what's app We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery)

Condition: used, color: other, first registration: 07/2005, Year of construction: 2004, Serial number: NO TEMPLATE We have a stock of >100 axles. Ledpfxsw Emxko Affota Please contact us if you can't find what you are looking for.

Condition: ready for operation (used), Year of construction: 1989, Pallet block saw LUDWIG incl. feeding of the blocks to the skid nailing machine Skid nailing machine with automatic feeding of the skids to the skid infeed Skid infeed incl. skid supply conveyor with skid turner and automatic separation, positioning and skid feed Assembly machine with U-template suitable for manual, semi-automatic or fully automatic feeding with automatic narrow / wide travel cycle time for nailing: start - nailing - nailing - nailing - template in starting position approx. 6 seconds Ltsdpfsuzhrpjx Affja Column stacker including various stacking programs, 90° or 180° stacking of pallets possible All nailing machines with central lubrication

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, cutting length (max.): 2,900 mm, saw blade diameter: 550 mm, power: 7.5 kW (10.20 HP), Altendorf F45 with comprehensive ElmoDrive control equipment! TECHNICAL DETAILS Carriage lengths and cutting lengths Carriage length (double roller carriage): 3,000 mm Cutting length with angle fence: 2,900 mm TIP-SERVO-DRIVE: 2,590 mm Maximum blade diameter: 550 mm Table extension: 840 mm Saw blade Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm MACHINE DETAILS Ltedowynhpopfx Affea Electrical data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Circuit protection: 25 A Dust extraction connection Extraction top: 80 mm Extraction bottom: 120 mm Negative pressure: 1,200 Pa at connection, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) Dimensions Working height: 910 mm EQUIPMENT Template holder directly at the control Preparation for 2-axis scorer Extended cutting height with one-sided tilt

Condition: new, Year of construction: 2024, Machine designation: Gantry Nailing Machine for the Pallet & Packaging Industry Manufacturer: Stoiber GmbH Model: StoNail 7000 Year of manufacture: 2024 Condition: New Price & Location: Price on request 4122 Arnreit Description: Lodpfx Aorallnjffjta • Designed for the production of various types of pallets and box components • Angled machine frame with wooden template wall • Divided into two work zones: the operator works alternately on the left or right side of the machine • The nailing bridge is equipped with up to 6 individually controlled nailing units for jumbo coil nails (approx. 6,000 nails) • Machine operation and programming of new pallet types are handled via a touch display • Existing programs can be recalled from memory at any time • Entered parameters are visualized on the touch display – no manual teaching of nailing points required! • NEW – Robot pallet stacking system! Technical Data: • Max. standard pallet size: 3,000 x 1,700 mm per side • Max. optional pallet size: 4,000 x 2,000 mm per side • Max. nail length: 130 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 – 600 pallets per 8 hours • Operators: 1 – 2 persons • Low operating and maintenance costs

Condition: new, axle configuration: 3 axles, Equipment: ABS, Availability: 5-6 months after receipt of order! Kässbohrer STC 30m³ chemical trailer NEW VEHICLE Tank # Self-supporting stainless steel tank (V4A, AISI 316Ti, DIN1.4571) # Tank code: L4BH # Volume: 30 m³ # 1 chamber with 4 baffles # 1 x filling dome/manhole DN 500 # 3 x cleaning dome DN 300 # 4" pneumatic bottom valve # 4" gate valve # 4" discharge line with reduction to 3? TW coupling at the rear # 1 x thermometer at the rear right # Insulation 100mm glass wool # 150°C max. operating temperature # 2 bar working pressure / 4 bar test pressure # End floors: RAL 3002 fireplace red Chassis & axles # BPW axles with disc brakes 22.5 Inch # Wabco brake system EBS 4S/2M with RSS  # Wabco ECAS air suspension system # 6 x branded tires 385/65 R 22.5 on aluminum rims "Alux" ET 0 # 1st axle as lift axle # Stainless steel chassis Others & accessories # Aspöck 24V lighting # LED work light rear right # 1 x fire extinguisher with container # Stainless steel tool box rear left Rental also possible on request! Ltodpfx Afsgimy Nofea ---- Subject to errors, changes and prior sale! Location: KTH-Trailer GmbH in 47574 Goch / Germany.

Condition: used, Year of construction: 2001, gearing type: mechanical, first registration: 01/2001, color: grey, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Telligent gearshift, switch 16 Ltsdpfx Afsi Rk R Uofea Gearbox number: 71552010180429, Actros gearbox G 240-16/11.7-0.69 with Voith secondary retarder R 115, Telligent gearshift! Dismantling of Daimler-Benz Actros 1848 AK 4x4, chassis number: WDB9520731K577913! The pictures are only a template so that you can see which vehicle the gearbox comes from! ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors reserved! - .

Condition: used, color: other, first registration: 07/2000, Year of construction: 2000, Serial number: NO TEMPLATE We have a stock of >100 axles. Ltjdpfx Aswx Nhzeffoa Please contact us if you can't find what you are looking for.

Year of construction: 2025, condition: new, Standard version with column Motorised height adjustment 700 mm Ltjdsgn Tzlepfx Affea Articulated arm length 2x 1.100 mm Height adjustment of grinding spindle 130 mm Grinding motor 5,5 kW including the following options: + speed control, spindle speed approx. 250 - 1.000 min-1 + pneumatic grinding pressure support + bellows cover for column and trapezoidal spindle + Incl. foundation screws and mounting template Grinding tools optionally available Request more information

Condition: refurbished (used), Overhauled tensile testing machine model Erichsen 472-500N Force Range: 0-500N Traverse resolution: 0.01mm Test speed: 0.5-500mm/min Truss stroke: 800mm Installation space width: 205mm Dimensions (HxWxD): 1035 x 340 x 320mm Weight: ca.40kg incl. 200N force transducer Force transducer model 713-200N Measuring Range: 0-200N (Optionally, other force transducers possible) incl. new machine control system Controller board with USB port for PC control via Windows incl. software package PM-Soft-Smart PC control and evaluation software for testing machines, executable on PCs with WINDOWS 10 or 11. The modern and powerful test software enables test sequences and evaluations in accordance with the relevant test standards, as well as the self-design of test templates and evaluations with the integrated test template editor and the protocol generator. Hint: The software offered requires a PC with Windows 10 or 11 and a USB interface. Ljdpendca Rsfx Affsta Incl. factory calibration of the force transducer in tension and compression direction with calibration certificate

Condition: new, Year of construction: 2024, Machine designation: Portal nailing machine for pallet production Manufacturer: Stoiber GmbH Model: StoNail 3000 Year of construction: 2024 Condition: New Price & Location: Price on request 4122 Arnreit Ltsdjralk Repfx Affea Description: - Semi-automatic portal nailing machine for the production of various types of pallets & crate parts. - A flexibly adjustable clamping system or a wooden wall for templates are available for inserting loose blocks and boards to minimize changeover times. - Divided into two work areas, the machine operator always works alternately on the left or right side of the machine. - The nailing bridge is equipped with up to 8 nailing devices with jumbo coil nails (approx. 8000 nails). By controlling the nailing devices together, this machine offers very short production times and therefore high throughputs. - Machine operation and programming of new pallet types are carried out via a touch display. Existing programs can be recalled from the memory at any time. No manual movement required to teach in the nailing points! - NEW - Robot for pallet stacking Technical data: - Pallet size max. standard: 2500 x 1700 mm per side - Pallet size max. optional: 3500 x 1700 mm per side - Nail length max.: 90 mm - Jumbo coil: approx. 1000 nails/coil - Production capacity: 400 - 600 pallets/8 h - Machine operator: 1 - 2 persons - Low operating and maintenance costs

Condition: used, Stationary hardness testing machine Hardness tester The hardness tester can be used manually with a template. The device is compatible with software, for data protection reasons the hard disk with software has been removed. Device is sold without software. Retrofit hardness tester Briviskop BL 3: HMEWin-Compact consisting of : 3.900,00 € -Pc with integrated touch screen -HMEWin-Touch Basis software - Hub with 12-pin connection for measuring system -Complete support system for the machine stand. Working time for retrofitting, commissioning, € 1,100.00 Calibration and instruction of employees approx. For more technical data, see type plate. You are welcome to come by for a viewing. You will receive a proper invoice. Ltedperfwynsfx Affsa A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades with templates Ltodpfx Aeqpdi Ueffja with fence immediately available Location: Austria, near Klagenfurt

Condition: used, color: other, first registration: 07/2005, Year of construction: 2005, Serial number: NO TEMPLATE We have a stock of >100 axles. Ltjdpfx Afewx Nd Ajfoa Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/1995, Year of construction: 1995, Serial number: NO TEMPLATE We have a stock of >100 axles. Ltedpfx Afowx I Srefsa Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/2010, Year of construction: 2010, Serial number: no template Ltodpowx Ixlefx Affoa We have a stock of >100 axles. Please contact us if you can't find what you are looking for.