Pallet production machine

STAKMA PALLETSTAR

Condition: used, Year of construction: 2019, functionality: fully functional, total width: 2,300 mm, total height: 2,500 mm, total length: 6,500 mm, type of input current: three-phase, number of previous owners: 1, The machine is in good working condition and suitable for daily use. It is equipped with 4 nail guns. Two MAX CN80 nail guns with a jumbo magazine. Two MAX CN55 nail guns. Nwsdpfx Aoz Nyfbeg Isn The price is available upon request.

Condition: excellent (used), Year of construction: 2018, Premier Pallet Inverter / Pallet Turner Year 2018 Electrohydraulic operation Maximum opening 1875mm Minimum opening 1050mm Nodpfowt S N Rex Ag Iswn Load capacity 2000kg Safety fencing included The FS 1900 Pallet Inverter Primary Uses: Invert boxes, bags, drums, pails, cans, glass vials, sheet steel and plastic, toilets, gas cylinders, super sacs and gaylords Handles almost any palletized load including slippery or unstable goods due to its high clamping pressure

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Nwedpfx Agjt Tvk Ae Ion Rotor width = working width 98 cm 22 kw motor with discharge auger

Condition: used, Year of construction: 2019, operating hours: 500 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Shredding/chipping machine Vecoplan VHZ 1300, hammer mills CPM, fan and cyclone filter JFK. The machine is in good condition and has only been in operation for approximately 500 hours. The line is complete with all conveyors. Njdpfxsympx Ue Ag Iown

Condition: used, functionality: fully functional, power: 130 kW (176.75 HP), empty load weight: 14,000 kg, BHS - DKX 4.0 Single Shaft Mixer in very good condition, suitable for concrete, roller-compacted concrete, cement-bound road base, sludge, etc. Thanks to the bottom discharge flaps, even challenging, cohesive, or coarse materials can be mixed effectively. Motor power: 130 kW, empty weight: 14 tons, output: approx. 400 tons/hour. PLC and new electrical cabinet also available. Price on request. Nwedexxtk Dspfx Ag Ien Haendle Box Feeder BKS 1506 with steel plate belt conveyor, large extensions (25 cbm), and two separately driven ripping shafts for challenging materials. Suitable for clay, loam, cohesive materials, substrates, humus, waste, etc. Two units available, new control system on request. Price on request.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Nwodpfx Aetk It Sog Ion Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: used, Year of construction: 2004, functionality: unexamined, EPAL Production line is for sale in Latvia Consists of: Nwsdjwgacrjpfx Ag Ijn Wood lengthening machine - KALLFASS PFA-250 Pallet leg lengthening machine - Bohm & Kruse Pallet top nailing machine - ENGELER Pallet turning machine Chain conveyor Pallet nailing machine - Bohm & Kruse Marking/corner cutting machine - Bohm & Kruse, Type 3/24/1500 Milling machine Roller conveyor Stacker - ENGELER ELEWFTORSTAPLER

Condition: excellent (used), Continuous horizontal press, to compact and pack materials such as cardboard, paper, plastics and others. IMABE IBERICA brand, pressure 125TN, loading mouth 1800 * 1000mm, with blades on the top of the compaction carriage that allows cutting the excess material above the compaction tunnel. Nsdpfx Agev U R Agj Iown Folding compaction tunnel, both at the top and on the sides, for greater retention of the material, outlet for bullets of dimensions 1050 * 1100mm and adjustable length. Automatic tying system, lateral, by 5 wires, for high production 30-35ton / hour. Fully rebuilt and revised in 2019

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Edgebander BIESSE Akron 1440A Availability: April/May 2026 CE certificate Year of manufacture: 2017 Possibility to inspect the machine before purchase Nwedpfjyh A I Ajx Ag Ijn

Condition: used, Year of manufacture: 2014 Colour: White Empty weight: 4.500 kg - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 - Transport weight [kg]: 4500kg Nsdpjx Hwhxofx Ag Iswn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels